A swirler stabilized combustion chamber for a micro-gas turbine fuelled with natural gas

Micro-gas turbines are a good alternative for on-site power generation, since their operation is very reliable. The possibility of operating with various fuels increases versatility and, as a result, the usage of these devices. Focusing on a performance improvement of a tri-fuel low-cost micro-gas turbine, this work presents investigations of the inner flow of its combustion chamber. The aim of this analysis was the characterization of the flame structure by the temperature field of the chamber inner flow. The chamber was fuelled with natural gas. In the current chamber, a swirler and a reversed flow configuration were utilized to provide flame stabilization. The inner flow investigations were done with numerical analysis, which were compared to experimental data. The analysis of the inner flow was done with numerical simulations, which used the RSM turbulence model. A β-PDF equilibrium model was adopted to account for the turbulent combustion process. Different models of heat transfer were compared. Thermal radiation and specially heat conduction in the liner walls played significant roles on results.

Metodologie e procedure per la verifica del rendimento delle turbine eoliche in condizioni operative ed orografia complessa

La tesi verte sulle procedure di verifica delle prestazioni di potenza degli aerogeneratori. Si è realizzato un test di verifica su una centrale eolica in esercizio, sito nella provincia di Salerno, utilizzando diverse metodologie di verifica, delineate dai più importanti centri di ricerca internazionali, al fine di valutare l'affidabilità di ognuna di esse.

Prediseño de modelos a escala para el estudio de fenómenos dinámicos de interacción suelo-estructura en aerogeneradores off-shore sobre monopilotes

Máster Universitario en Eficiencia Energética (SIANI)

Cooperative communication and distributed detection in wireless sensor networks

Recent progress in microelectronic and wireless communications have enabled the development of low cost, low power, multifunctional sensors, which has allowed the birth of new type of networks named wireless sensor networks (WSNs). The main features of such networks are: the nodes can be positioned randomly over a given field with a high density; each node operates both like sensor (for collection of environmental data) as well as transceiver (for transmission of information to the data retrieval); the nodes have limited energy resources. The use of wireless communications and the small size of nodes, make this type of networks suitable for a large number of applications. For example, sensor nodes can be used to monitor a high risk region, as near a volcano; in a hospital they could be used to monitor physical conditions of patients. For each of these possible application scenarios, it is necessary to guarantee a trade-off between energy consumptions and communication reliability. The thesis investigates the use of WSNs in two possible scenarios and for each of them suggests a solution that permits to solve relating problems considering the trade-off introduced. The first scenario considers a network with a high number of nodes deployed in a given geographical area without detailed planning that have to transmit data toward a coordinator node, named sink, that we assume to be located onboard an unmanned aerial vehicle (UAV). This is a practical example of reachback communication, characterized by the high density of nodes that have to transmit data reliably and efficiently towards a far receiver. It is considered that each node transmits a common shared message directly to the receiver onboard the UAV whenever it receives a broadcast message (triggered for example by the vehicle). We assume that the communication channels between the local nodes and the receiver are subject to fading and noise. The receiver onboard the UAV must be able to fuse the weak and noisy signals in a coherent way to receive the data reliably. It is proposed a cooperative diversity concept as an effective solution to the reachback problem. In particular, it is considered a spread spectrum (SS) transmission scheme in conjunction with a fusion center that can exploit cooperative diversity, without requiring stringent synchronization between nodes. The idea consists of simultaneous transmission of the common message among the nodes and a Rake reception at the fusion center. The proposed solution is mainly motivated by two goals: the necessity to have simple nodes (to this aim we move the computational complexity to the receiver onboard the UAV), and the importance to guarantee high levels of energy efficiency of the network, thus increasing the network lifetime. The proposed scheme is analyzed in order to better understand the effectiveness of the approach presented. The performance metrics considered are both the theoretical limit on the maximum amount of data that can be collected by the receiver, as well as the error probability with a given modulation scheme. Since we deal with a WSN, both of these performance are evaluated taking into consideration the energy efficiency of the network. The second scenario considers the use of a chain network for the detection of fires by using nodes that have a double function of sensors and routers. The first one is relative to the monitoring of a temperature parameter that allows to take a local binary decision of target (fire) absent/present. The second one considers that each node receives a decision made by the previous node of the chain, compares this with that deriving by the observation of the phenomenon, and transmits the final result to the next node. The chain ends at the sink node that transmits the received decision to the user. In this network the goals are to limit throughput in each sensor-to-sensor link and minimize probability of error at the last stage of the chain. This is a typical scenario of distributed detection. To obtain good performance it is necessary to define some fusion rules for each node to summarize local observations and decisions of the previous nodes, to get a final decision that it is transmitted to the next node. WSNs have been studied also under a practical point of view, describing both the main characteristics of IEEE802:15:4 standard and two commercial WSN platforms. By using a commercial WSN platform it is realized an agricultural application that has been tested in a six months on-field experimentation.

Multi-pollutants impact on modern cement built heritage

It is well known that the deposition of gaseous pollutants and aerosols plays a major role in causing the deterioration of monuments and built cultural heritage in European cities. Despite of many studies dedicated to the environmental damage of cultural heritage, in case of cement mortars, commonly used in the 20th century architecture, the deterioration due to air multipollutants impact, especially the formation of black crusts, is still not well explored making this issue a challenging area of research. This work centers on cement mortars – environment interactions, focusing on the diagnosis of the damage on the modern built heritage due to air multi-pollutants. For this purpose three sites, exposed to different urban areas in Europe, were selected for sampling and subsequent laboratory analyses: Centennial Hall, Wroclaw (Poland), Chiesa dell'Autostrada del Sole, Florence (Italy), Casa Galleria Vichi, Florence (Italy). The sampling sessions were performed taking into account the height from the ground level and protection from rain run off (sheltered, partly sheltered and exposed areas). The complete characterization of collected damage layer and underlying materials was performed using a range of analytical techniques: optical and scanning electron microscopy, X ray diffractometry, differential and gravimetric thermal analysis, ion chromatography, flash combustion/gas chromatographic analysis, inductively coupled plasma-optical emission spectrometer. The data were elaborated using statistical methods (i.e. principal components analyses) and enrichment factor for cement mortars was calculated for the first time. The results obtained from the experimental activity performed on the damage layers indicate that gypsum, due to the deposition of atmospheric sulphur compounds, is the main damage product at surfaces sheltered from rain run-off at Centennial Hall and Casa Galleria Vichi. By contrast, gypsum has not been identified in the samples collected at Chiesa dell'Autostrada del Sole. This is connected to the restoration works, particularly surface cleaning, regularly performed for the maintenance of the building. Moreover, the results obtained demonstrated the correlation between the location of the building and the composition of the damage layer: Centennial Hall is mainly undergoing to the impact of pollutants emitted from the close coal power stations, whilst Casa Galleria Vichi is principally affected by pollutants from vehicular exhaust in front of the building.

Ultra-low power WSNs: distributed signal processing and dynamic resource management

This thesis presents several data processing and compression techniques capable of addressing the strict requirements of wireless sensor networks. After introducing a general overview of sensor networks, the energy problem is introduced, dividing the different energy reduction approaches according to the different subsystem they try to optimize. To manage the complexity brought by these techniques, a quick overview of the most common middlewares for WSNs is given, describing in detail SPINE2, a framework for data processing in the node environment. The focus is then shifted on the in-network aggregation techniques, used to reduce data sent by the network nodes trying to prolong the network lifetime as long as possible. Among the several techniques, the most promising approach is the Compressive Sensing (CS). To investigate this technique, a practical implementation of the algorithm is compared against a simpler aggregation scheme, deriving a mixed algorithm able to successfully reduce the power consumption. The analysis moves from compression implemented on single nodes to CS for signal ensembles, trying to exploit the correlations among sensors and nodes to improve compression and reconstruction quality. The two main techniques for signal ensembles, Distributed CS (DCS) and Kronecker CS (KCS), are introduced and compared against a common set of data gathered by real deployments. The best trade-off between reconstruction quality and power consumption is then investigated. The usage of CS is also addressed when the signal of interest is sampled at a Sub-Nyquist rate, evaluating the reconstruction performance. Finally the group sparsity CS (GS-CS) is compared to another well-known technique for reconstruction of signals from an highly sub-sampled version. These two frameworks are compared again against a real data-set and an insightful analysis of the trade-off between reconstruction quality and lifetime is given.

Nonlinear Characterization and Modelling of GaN HEMTs for Microwave Power Amplifier Applications

Semiconductors technologies are rapidly evolving driven by the need for higher performance demanded by applications. Thanks to the numerous advantages that it offers, gallium nitride (GaN) is quickly becoming the technology of reference in the field of power amplification at high frequency. The RF power density of AlGaN/GaN HEMTs (High Electron Mobility Transistor) is an order of magnitude higher than the one of gallium arsenide (GaAs) transistors. The first demonstration of GaN devices dates back only to 1993. Although over the past few years some commercial products have started to be available, the development of a new technology is a long process. The technology of AlGaN/GaN HEMT is not yet fully mature, some issues related to dispersive phenomena and also to reliability are still present. Dispersive phenomena, also referred as long-term memory effects, have a detrimental impact on RF performances and are due both to the presence of traps in the device structure and to self-heating effects. A better understanding of these problems is needed to further improve the obtainable performances. Moreover, new models of devices that take into consideration these effects are necessary for accurate circuit designs. New characterization techniques are thus needed both to gain insight into these problems and improve the technology and to develop more accurate device models. This thesis presents the research conducted on the development of new charac- terization and modelling methodologies for GaN-based devices and on the use of this technology for high frequency power amplifier applications.

Grid Connected Doubly Fed Induction Generator Based Wind Turbine under LVRT

This project concentrates on the Low Voltage Ride Through (LVRT) capability of Doubly Fed Induction Generator (DFIG) wind turbine. The main attention in the project is, therefore, drawn to the control of the DFIG wind turbine and of its power converter and to the ability to protect itself without disconnection during grid faults. It provides also an overview on the interaction between variable speed DFIG wind turbines and the power system subjected to disturbances, such as short circuit faults. The dynamic model of DFIG wind turbine includes models for both mechanical components as well as for all electrical components, controllers and for the protection device of DFIG necessary during grid faults. The viewpoint of this project is to carry out different simulations to provide insight and understanding of the grid fault impact on both DFIG wind turbines and on the power system itself. The dynamic behavior of DFIG wind turbines during grid faults is simulated and assessed by using a transmission power system generic model developed and delivered by Transmission System Operator in the power system simulation toolbox Digsilent, Matlab/Simulink and PLECS.

Prestazioni energetico-ambientali di sistemi cogenerativi avanzati e analisi di casi applicativi

Lo scopo di questa tesi è quello di analizzare dapprima l’impatto ambientale di tali impianti e poi analizzare il contributo effettivo che oggi la tecnologia innovativa dei cicli Rankine organici può dare nella valorizzazione elettrica del calore di scarto di processi industriali, focalizzando l’obiettivo principalmente sulle turbine a gas ed eseguendo un caso di studio in un settore ancora poco esplorato da questa tecnologia, quello Oil&Gas. Dopo aver effettuato il censimento degli impianti a fonti fossili e rinnovabili, cogenerativi e non, presenti in Emilia-Romagna, è stato sviluppato un software chiamato MiniBref che permette di simulare il funzionamento di una qualsiasi centrale termoelettrica grazie alla possibilità di combinare la tecnologia dell’impianto con il tipo di combustibile consentendo la valutazione delle emissioni inquinanti ed i potenziali di inquinamento. Successivamente verranno illustrati gli ORC, partendo dalle caratteristiche impiantistiche e termodinamiche fino ad arrivare alla scelta del fluido organico, fondamentale per le performance del ciclo. Dopo aver effettuato una ricognizione dello stato dell’arte delle applicazioni industriali degli ORC nel recupero termico, verranno eseguite simulazioni numeriche per ricostruire gli ORC ed avere una panoramica il più completa ed attendibile delle prestazioni effettive di questi sistemi. In ultimo verranno illustrati i risultati di un caso di studio che vede l’adozione di recupero mediante ciclo organico in un’installazione esistente del settore Oil&Gas. Si effettuerà uno studio delle prestazione dell’impianto al variare delle pressioni massime e minime del ciclo ed al variare del fluido impiegato al fine di mostrare come questi parametri influenzino non solo le performance ma anche le caratteristiche impiantistiche da adottare. A conclusione del lavoro si riporteranno i risultati relativi all’analisi condotte considerando l’impianto ai carichi parziali ed in assetto cogenerativo.

Spatial and functional relationships between air conduits and blood capillaries in the pulmonary gas exchange tissue of adult and developing chickens

The documented data regarding the three-dimensional structure of the air capillaries (ACs), the ultimate sites of gas exchange in the avian lung is contradictory. Further, the mode of gas exchange, described as cross-current has not been clearly elucidated. We studied the temporal and spatial arrangement of the terminal air conduits of the chicken lung and their relationship with the blood capillaries (BCs) in embryos as well as the definitive architecture in adults. Several visualization techniques that included corrosion casting, light microscopy as well as scanning and transmission electron microscopy were used. Two to six infundibulae extend from each atrium and give rise to numerous ACs that spread centrifugally. Majority of the ACs are tubular structures that give off branches, which anastomose with their neighboring cognates. Some ACs have globular shapes and a few are blind-ending tapering tubes. During inauguration, the luminal aspects of the ACs are characterized by numerous microvillus-like microplicae, which are formed during the complex processes of cell attenuation and canalization of the ACs. The parabronchial exchange BCs, initially inaugurated as disorganized meshworks, are reoriented via pillar formation to lie predominantly orthogonal to the long axes of the ACs. The remodeling of the retiform meshworks by intussusceptive angiogenesis essentially accomplishes a cross-current system at the gas exchange interface in the adults, where BCs form ring-like patterns around the ACs, thus establishing a cross-current system. Our findings clarify the mode of gas exchange in the parabronchial mantle and illuminate the basis for the functional efficiency of the avian lung.

DESIGN OF A LIQUID FUEL INJECTOR FOR ALTERNATIVE FUEL STUDIES IN AN ATMOSPHERIC MODEL GAS TURBINE COMBUSTOR

A new liquid-fuel injector was designed for use in the atmospheric-pressure, model gas turbine combustor in Bucknell University’s Combustion Research Laboratory during alternative fuel testing. The current liquid-fuel injector requires a higher-than-desired pressure drop and volumetric flow rate to provide proper atomization of liquid fuels. An air-blast atomizer type of fuel injector was chosen and an experiment utilizing water as the working fluid was performed on a variable-geometry prototype. Visualization of the spray pattern was achieved through photography and the pressure drop was measured as a function of the required operating parameters. Experimental correlations were used to estimate droplet sizes over flow conditions similar to that which would be experienced in the actual combustor. The results of this experiment were used to select the desired geometric parameters for the proposed final injector design and a CAD model was generated. Eventually, the new injector will be fabricated and tested to provide final validation of the design prior to use in the combustion test apparatus.

A sublimation technique for high-precision measurements of d13CO2 and mixing ratios of CO2 and N2O from air trapped in ice cores

In order to provide high precision stable carbon isotope ratios (δ13CO2 or δ13C of CO2) from small bubbly, partially and fully clathrated ice core samples we developed a new method based on sublimation coupled to gas chromatography-isotope ratio mass spectrometry (GC-IRMS). In a first step the trapped air is quantitatively released from ~30 g of ice and CO2 together with N2O are separated from the bulk air components and stored in a miniature glass tube. In an off-line step, the extracted sample is introduced into a helium carrier flow using a minimised tube cracker device. Prior to measurement, N2O and organic sample contaminants are gas chromatographically separated from CO2. Pulses of a CO2/N2O mixture are admitted to the tube cracker and follow the path of the sample through the system. This allows an identical treatment and comparison of sample and standard peaks. The ability of the method to reproduce δ13C from bubble and clathrate ice is verified on different ice cores. We achieve reproducibilities for bubble ice between 0.05 ‰ and 0.07 ‰ and for clathrate ice between 0.05 ‰ and 0.09 ‰ (dependent on the ice core used). A comparison of our data with measurements on bubble ice from the same ice core but using a mechanical extraction device shows no significant systematic offset. In addition to δ13C, the CO2 and N2O mixing ratios can be volumetrically derived with a precision of 2 ppmv and 8 ppbv, respectively.

Combustion of Biogas in a Gas Turbine Simulation

Research was to investigate the effects of increasing levels of carbon dioxide addition to the combustion of methane with air. Using an atmospheric-pressure, swirl-stabilized dump combustor, emissions data and flame stability limitations were measured and analyzed.

The Constitutional-Judicial Control of the Legislative and Executive Powers in Central and Eastern European Countries

This project looked at the nature, contents, methods, means and legal and political effects of the influence that constitutional courts exercise upon the legislative and executive powers in the newly established democracies of Central and Eastern Europe. The basic hypothesis was that these courts work to provide a limitation of political power within the framework of the principal constitutional values and that they force the legislature and executive to exercise their powers and duties in strict accordance with the constitution. Following a study of the documentary sources, including primarily the relevant constitutional and statutory provisions and decisions of constitutional courts, Mr. Cvetkovski prepared a questionnaire on various aspects of the topics researched and sent it to the respective constitutional courts. A series of direct interviews with court officials in six of the ten countries then served to clarify a large number of questions relating to differences in procedures etc. that arose from the questionnaires. As a final stage, the findings were compared with those described in recent publications on constitutional control in general and in Central and Eastern Europe in particular. The study began by considering the constitutional and political environment of the constitutional courts' activities in controlling legislative and executive powers, which in all countries studied are based on the principles of the rule of law and the separation of powers. All courts are separate bodies with special status in terms of constitutional law and are independent of other political and judicial institutions. The range of matters within their jurisdiction is set by the constitution of the country in question but in all cases can be exercised only with the framework of procedural rules. This gives considerable significance to the question of who sets these rules and different countries have dealt with it in different ways. In some there is a special constitutional law with the same legal force as the constitution itself (Croatia), the majority of countries allow for regulation by an ordinary law, Macedonia gives the court the autonomy to create and change its own rules of procedure, while in Hungary the parliament fixes the rules on procedure at the suggestion of the constitutional court. The question of the appointment of constitutional judges was also considered and of the mechanisms for ensuring their impartiality and immunity. In the area of the courts' scope for providing normative control, considerable differences were found between the different countries. In some cases the courts' jurisdiction is limited to the normative acts of the respective parliaments, and there is generally no provision for challenging unconstitutional omissions by legislation and the executive. There are, however, some situations in which they may indirectly evaluate the constitutionality of legislative omissions, as when the constitution contains provision for a time limit on enacting legislation, when the parliament has made an omission in drafting a law which violates the constitutional provisions, or when a law grants favours to certain groups while excluding others, thereby violating the equal protection clause of the constitution. The control of constitutionality of normative acts can be either preventive or repressive, depending on whether it is implemented before or after the promulgation of the law or other enactment being challenged. In most countries in the region the constitutional courts provide only repressive control, although in Hungary and Poland the courts are competent to perform both preventive and repressive norm control, while in Romania the court's jurisdiction is limited to preventive norm control. Most countries are wary of vesting constitutional courts with preventive norm control because of the danger of their becoming too involved in the day-to-day political debate, but Mr. Cvetkovski points out certain advantages of such control. If combined with a short time limit it can provide early clarification of a constitutional issue, secondly it avoids the problems arising if a law that has been in force for some years is declared to be unconstitutional, and thirdly it may help preserve the prestige of the legislation. Its disadvantages include the difficulty of ascertaining the actual and potential consequences of a norm without the empirical experience of the administration and enforcement of the law, the desirability of a certain distance from the day-to-day arguments surrounding the political process of legislation, the possible effects of changing social and economic conditions, and the danger of placing obstacles in the way of rapid reactions to acute situations. In the case of repressive norm control, this can be either abstract or concrete. The former is initiated by the supreme state organs in order to protect abstract constitutional order and the latter is initiated by ordinary courts, administrative authorities or by individuals. Constitutional courts cannot directly oblige the legislature and executive to pass a new law and this remains a matter of legislative and executive political responsibility. In the case of Poland, the parliament even has the power to dismiss a constitutional court decision by a special majority of votes, which means that the last word lies with the legislature. As the current constitutions of Central and Eastern European countries are newly adopted and differ significantly from the previous ones, the courts' interpretative functions should ensure a degree of unification in the application of the constitution. Some countries (Bulgaria, Hungary, Poland, Slovakia and Russia) provide for the constitutional courts' decisions to have a binding role on the constitutions. While their decisions inevitably have an influence on the actions of public bodies, they do not set criteria for political behaviour, which depends rather on the overall political culture and traditions of the society. All constitutions except that of Belarus, provide for the courts to have jurisdiction over conflicts arising from the distribution of responsibilities between different organs and levels in the country, as well for impeachment procedures against the head of state, and for determining the constitutionality of political parties (except in Belarus, Hungary, Russia and Slovakia). All the constitutions studied guarantee individual rights and freedoms and most courts have jurisdiction over complaints of violation of these rights by the constitution. All courts also have some jurisdiction over international agreements and treaties, either directly (Belarus, Bulgaria and Hungary) before the treaty is ratified, or indirectly (Croatia, Czech Republic, Macedonia, Romania, Russia and Yugoslavia). In each country the question of who may initiate proceedings of norm control is of central importance and is usually regulated by the constitution itself. There are three main possibilities: statutory organs, normal courts and private individuals and the limitations on each of these is discussed in the report. Most courts are limited in their rights to institute ex officio a full-scale review of a point of law, and such rights as they do have rarely been used. In most countries courts' decisions do not have any binding force but must be approved by parliament or impose on parliament the obligation to bring the relevant law into conformity within a certain period. As a result, the courts' position is generally weaker than in other countries in Europe, with parliament remaining the supreme body. In the case of preventive norm control a finding of unconstitutionality may act to suspend the law and or to refer it back to the legislature, where in countries such as Romania it may even be overturned by a two-thirds majority. In repressive norm control a finding of unconstitutionality generally serves to take the relevant law out of legal force from the day of publication of the decision or from another date fixed by the court. If the law is annulled retrospectively this may or may not bring decisions of criminal courts under review, depending on the provisions laid down in the relevant constitution. In cases relating to conflicts of competencies the courts' decisions tend to be declaratory and so have a binding effect inter partes. In the case of a review of an individual act, decisions generally become effective primarily inter partes but is the individual act has been based on an unconstitutional generally binding normative act of the legislature or executive, the findings has quasi-legal effect as it automatically initiates special proceedings in which the law or other regulation is to be annulled or abrogated with effect erga omnes. This wards off further application of the law and thus further violations of individual constitutional rights, but also discourages further constitutional complaints against the same law. Thus the success of one individual's complaint extends to everyone else whose rights have equally been or might have been violated by the respective law. As the body whose act is repealed is obliged to adopt another act and in doing so is bound by the legal position of the constitutional court on the violation of constitutionally guaranteed freedoms and rights of the complainant, in this situation the decision of the constitutional court has the force of a precedent.

Towards a Variety of Family Models: Economic Contributions of Spouses and Family Power

In Western societies the increase in female employment (especially among married women) is seen as having brought about the crisis of the traditional model of the family, reinforcing the position of the "modern" model - the egalitarian family with two working spouses and a "dual-career" family. In contrast, the transitional situation in the post-communist countries during the 1990s is producing a crisis of the family with two working spouses (the basic type of the communist period) and leading to new power relations within the family. While the growth of dual-earner households in this century has implied modification of family models towards greater symmetry of responsibility for breadwinning and homemaking, there is considerable evidence that women's increased employment does not necessarily lead to a more egalitarian approach to gender roles within the family. The group set out to investigate the economic situation of families and economic power within the fame as a crucial factor in the transformation of families with two working spouses in order to reveal the specific patterns of gender contracts and power relations within the family that are emerging in response to the current political and economic transformation. They opted for a comparative approach, selecting the Czech Republic as a country where the very similar tendencies of a few years ago (almost 100% of women employed and the family as a realm of considerable private freedom where both women's and men's gender identities and the traditional distribution of family responsibilities were largely preserved) are combined with a very different experience in terms of economic inequalities during the 1990s to that of Russia. In the first stage of the study they surveyed 300 married couples (150 in each country) on the question of breadwinning. They then carried out in-depth interviews with 10 couples from each country (selected from among the educated layers of the population), focusing on the process of the social construction of gender, using breadwinning and homemaking as gender boundaries which distinguish men from women. By analysing changes in social position and the type of interpersonal interaction of spouses they distinguished two main types of family contracts: the neo-traditional "communal sharing" (with male breadwinner, traditional distribution of family chores and negotiated family power) and the modern one based on negotiated agreement. The most important pre-conditions of husband-wife agreement about breadwinning seemed to imply their overall gender ideology rather than the economic and/or family circumstances. In general, wives were more likely to express egalitarian views, supporting the blurring or even elimination of many gender boundaries. Husbands, on the other hand, more often gave responses calling for the continued maintenance of gender boundaries. The analysis showed that breadwinning is still an important gender boundary in these cultures, one that is assumed unless it is explicitly questioned and that is seen as part of what makes a man a "real man". The majority of respondents seemed to be committed to egalitarian ideology on gender roles and the distribution of family tasks, including decision making, but this is contradicted by the persistent idea of the husband as the breadwinner. This contradiction is more characteristic of the Russian situation than of the Czech. The quantitative study showed a difference in prevailing family models between the two countries, with a clearer shift towards the traditional family contract in the Russian case. The Czechs were more likely to consider their partnerships as based on negotiated agreement, while the Russians saw theirs as based on egalitarian contract, in both cases seeing this as the norm. The majority of couples said they felt satisfied with their marriage, although in both countries wives seemed to be less satisfied. There was however a difference in the issues that aroused dissatisfaction, with Czech women being more sensitive to issues such as self-realisation, personal independence, understanding and recognition in the family, and Russians to issues of love, understanding and recognition. The most disputed area for the majority of families was chores in the home, presumably because in many families both husband and wife were working hard outside the home and because a number of partners had differing views as to the ideal distribution of chores within the family. The distribution of power in the family seems to be linked to the level of well being. The analysis showed that in the dominant democratic model there is still an inverse connection between family leadership and well being: the more prominent the wife's position as head of the family is, the lower the level of family income. This may reflect both the husband's refusal to play the leading role in the family and even his rejection of any involvement in family issues in such a family. The qualitative research revealed that both men and women see the breadwinning role to be an essential part of masculine identity, a role which the female partner would take on temporarily to assist the male but not permanently since this would threaten the gender boundaries and the man's identity. At the same time, few breadwinners expressed a sense of job satisfaction and all considered their choice as imposed on them by the circumstances (i.e. having a family in difficult times). The group feel that family orientation and some loss of personal involvement in their profession is partly reflected in the fact that many of the men felt more comfortable and self-confident at home than at work. Women's work, on the other hand, was largely seen as a source of personal and self-realisation and social life. Eight out of ten of the Russian women interviewed were employed, although only two on a full-time basis, but none saw their jobs as adding substantially to the family budget. Both partners see the most important factor as the wife's wish to work or stay at home, and do not think it wise for the wife to work at the expense of her part of the "family contract", although husbands from the "egalitarian" relationships expressed more willingness to compromise. The analysis showed clearly that wives and husbands did not construct gender boundaries in isolation, with the interviews providing clear evidence of negotiation. At the same time, husbands' interpretations of their wives' employment were less susceptible to the influence of negotiation than were their gender attitudes and norms about breadwinning. One of the most interesting aspects of the spouses' negotiations was the extent to which they disagreed about what they seemed to have agreed upon. Most disagreements about the breadwinning boundaries, however, were over norms and were settled by changes in norms rather than in behavioural interpretation. Changes in norms were often a form of peace offering or were in response in changes in circumstances. The study did show, however, that many of the efforts at cooperation and compensation were more symbolic than real and the group found the plasticity of expressed gender ideology to be one of the most striking findings of their work. They conclude that the shift towards more traditional gednder distributions of incomes and domestic chores does not automatically mean the reestablishment of a patriarchal model of family power. On the contrary, it seems to be a compromise formation, relatively unstable, temporary and containing self-defeating forces as the split between the personal and professional value of work and its social value expressed in a money equivalent cannot be maintained for generations.