Contribution of climate and air pollution to variation in coronary heart disease mortality rates in England

There are substantial geographic variations in coronary heart disease (CHD) mortality rates in England that may in part be due to differences in climate and air pollution. An ecological cross-sectional multi-level analysis of male and female CHD mortality rates in all wards in England (1999–2004) was conducted to estimate the relative strength of the association between CHD mortality rates and three aspects of the physical environment - temperature, hours of sunshine and air quality. Models were adjusted for deprivation, an index measuring the healthiness of the lifestyle of populations, and urbanicity. In the fully adjusted model, air quality was not significantly associated with CHD mortality rates, but temperature and sunshine were both significantly negatively associated (p<0.05), suggesting that CHD mortality rates were higher in areas with lower average temperature and hours of sunshine. After adjustment for the unhealthy lifestyle of populations and deprivation, the climate variables explained at least 15% of large scale variation in CHD mortality rates. The results suggest that the climate has a small but significant independent association with CHD mortality rates in England.

From exclusion to agency in Papua: Pagar Adat Papua (the Papuan Customary Framework) as a culture- centred approach to HIV and AIDS communication

 This thesis examines the existing constructions, multiple discourses and framings of the HIV and AIDS epidemic in the Mee community of Papua, Indonesia, through the lens of a culture-centred approach to HIV and AIDS communication.

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Air velocity and exposure time to ventilation affect body surface and rectal temperature of broiler chickens

Increasing air movement over poultry by using fans (ventilation) has become an accepted means of reducing environmental heat stress over the last several years. The purpose of this study was to evaluate the effect of air velocity and exposure time to ventilation on body surface and rectal temperature of broiler chickens. Male broiler chickens aged 36-42 days were placed in individual wire cages and exposed to five different air velocities (5.7, 4.2, 3.1, 2.4, or 1.8 m/sec). Throughout the experiment head, back, leg, and rectal temperatures were monitored every 10 min during a 30-min period for each air velocity. The data showed that exposure time to the wind affected (P<.05) leg and body temperature, with a rapid reduction being observed during the first 10 min. There was a reduction in leg temperature with air velocity of 2 m/sec; however, air velocity lower than 4.5 m/sec was not effective in decreasing head and back temperature. The results suggest that air velocity of 2 m/sec, in air temperature of 29 degrees C, improves heat loss in the birds. The data also indicate that exposure time to ventilation seems to be a critical point in the maintenance of bird thermal homeostasis.

Stress responses in juvenile pacu (Piaractus mesopotamicus) submitted to repeated air exposure.

Pacu juveniles (5.2 [plus or minus] 1.5 g) were submitted to two one-minute air exposures in a 24h interval, and sampled before the exposure (control) and 5, 15, 30 and 60 min., 24 and 48h afterwards for whole-body cortisol, sodium, potassium and calcium ion concentrations. For the first air exposure, there was a trend of increased cortisol concentration after 15 min., whereas in the second air exposure, the cortisol concentration increased significantly within 5 min. after stress was induced. Sodium ion concentration increased significantly 24h after both air exposures. Potassium concentration presented fluctuations over the experimental period. Calcium ion concentration increased progressively from 5 to 30 min., in both air exposures. The repeated air exposures exacerbated the cortisol response, but they did not affect the recovery ability of pacu over the experimental period. Additionally, the whole-body cortisol measurement might be a reliable indicator of stress, when sampled fish are smaller and blood volumes are very low, making samples inadequate for analysis.

Indoor Air quality related to occupancy at an air-conditioned public building

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cardiorespiratory responses to hypoxia in the African catfish, Clarias gariepinus (Burchell 1822), an air-breathing fish

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tolerance to the air exposition test of Hoplias lacerdae larvae and juvenile during its initial development

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analysis of various conditions in order to measure electromyography of isometric contractions in water and on air

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Air-assistance and low volume application to control of asian rust on soybean crop

Currently, one of factors that cause the production cost increase of soybean crop is the pesticide application. The most important disease in soybean crop is Asian rust, caused by Phakopsora pachyrhizi Sydon & P. Sydon fungus, which can cause significant loss of the production. Therefore, this work aimed at evaluation of different spraying techniques on the spray deposits and some parameters of soybean crop: grain size, weight of 1 000 seeds and the crop productivity. Two experiments were carried out in the experimental area of FCA/UNESP (Faculdade de Ciencias Agronomicas/Universidade Estadual Paulista Julio de Mesquita Filho) - Botucatu, S P, Brazil, in soybean crop, Conquista variety, in the 2007/2008 season. In the first experiment, three air levels (0, 9 and 29 km/h of the air speed generated by fan) with flat fan nozzle XR 8002 with a spray volume of 130 l/ha were compared with a rotating nozzle - using low volume oily - LVO at 40 l/ha of spray volume. The second experiment was carried out under the same conditions as the previous experiment, including a control treatment (untreated plants). The disease severity was evaluated using a diagrammatic scale with a visual evaluation of the disease on 15 leaves of each plot. The grades varied between 0.6 and 78.5% of the disease severity. The use of air assistance when compared with the rotating system nozzle did not show significant differences for spray deposits on adaxial and abaxial surface of the leaves in bottom part of the plant. The air assistance with maximum air speed (29 km/h) increased the productivity with respect of the other treatments.

Is the environmental policies procedures a barrier to development of inland navigation and port management? A case of study in Brazil

The main objective of this article is to discuss the Brazilian environmental legislation and policies towards the development of navigation and port management. The research illustrated some difficulties faced by the country and make suggestions to overcome it. The construction of the environmental legal framework began in the early 1960s and resulted in a very complex system, as a consequence of policies adopted by the country. Nowadays Brazilian environmental policies are developed in democratic and participative way, although with elevated degree of bureaucracy and lack of integration among the several governmental agencies, which makes the approval of environmental certifications demand several years for new port projects or improvements, which delays the economic development of the country. Efforts have been made to simplify the licensing process. As result of this research two flowchart for environmental licenses of ports installation are shown: The first shows the process until 2009 and the second shows the process nowadays. This become an important issue due the fact that inland navigation is one of the less pollutant modes of transportation, and although, the process of environmental certification was simplified, if compare with 2009, it is still complex and time-consuming, delaying the development of the infrastructure. © 2012 Elsevier Ltd.

Perfil de abdome agudo cirúrgico em pacientes com HIV/AIDS em um hospital de referência no estado do Pará

A Síndrome da Imunodeficiência Adquirida (Aids) é uma doença do sistema imunológico humano causada pelo vírus da imunodeficiência humana (HIV). O HIV ataca células humanas responsáveis por defender o organismo de doenças, sendo os linfócitos T CD4+ os mais atingidos. A dor abdominal em paciente imunodeprimido evolui com difícil manejo diagnóstico, sendo mandatório ao cirurgião estar familiarizado com os diversos diagnósticos diferenciais e complicações secundárias da Aids. O presente trabalho teve como objetivo descrever os aspectos clínico-epidemiológicos de pacientes com Aids que evoluíram com abdome agudo e receberam tratamento cirúrgico no período de janeiro de 2001 a janeiro de 2011 no Hospital Universitário João de Barros Barreto. Foi um estudo observacional, retrospectivo, do tipo caso-controle, onde o grupo de casos foi constituído por pacientes com Aids que evoluíram com abdome agudo e o grupo controle, por pacientes que também evoluíram com abdome agudo, porém sem condição imunossupressora associada. Houve predominância do sexo masculino na proporção 4,5 homens para cada mulher no grupo com aids, porém com proporção similar nos controles. A maioria dos pacientes (87%) do grupo controle apresentou alguma alteração laboratorial, diferentemente do grupo com Aids, onde 38,5% dos pacientes tiveram resultado normal. A anemia esteve presente em 75% dos pacientes com Aids e a leucocitose em 80% do grupo controle. A causa mais frequente de abdome agudo na população com Aids foi perfuração intestinal (82,1%), enquanto no grupo controle foi obstrução intestinal (39,1%). Somente o quadro clínico de defesa abdominal e diminuição de ruídos hidroaéreos apresentaram diferença estatisticamente significativa (p<0.01). As alterações radiológicas mais frequentes foram distensão de alças em 87,2% dos pacientes com Aids e níveis hidroaéreos em 65,2% dos pacientes do grupo controle. A principal cirurgia realizada no grupo Aids foi a ressecção intestinal com reconstrução primária do trânsito (65,5%). As complicações cirúrgicas foram mais frequentes no grupo com Aids (87,2% com infecção de ferida operatória) e a causa predominante de óbito em ambos os grupos foi sepse a partir de foco abdominal (81% nos casos e 87,5% controles), inclusive nos pacientes ostomizados. A probabilidade de óbito nos casos com Aids foi superior em cerca de 2 vezes em relação aos controles. O tempo de internação e o tempo de pós-operatório até o óbito foi menor nos pacientes com Aids em comparação aos controles. Sendo fundamental a realização do estudo para melhorar o manejo e sobrevida dos pacientes com Aids.

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

Objectives: This study evaluated the influence of air-particle abrasion protocols on the surface roughness (SR) of zirconia and the shear bond strength (SBS) of dual-polymerized resin cement to this ceramic. Materials and methods. Sintered zirconia blocks (n = 115) (Lava, 3M ESPE) were embedded in acrylic resin and polished. The specimens were divided according to the 'particle type' (Al: 110 mu m Al2O3; Si: 110 mu m SiO2) and 'pressure' factors (2.5 or 3.5 bar) (n = 3 per group): (a) Control (no air-abrasion); (b) Al2.5; (c) Si2.5; (d) Al3.5; (e) Si3.5. SR (Ra) was measured 3-times from each specimen after 20 s of air-abrasion (distance: 10 mm) using a digital optical profilometer. Surface topography was evaluated under SEM analyses. For the SBS test, 'particle type', 'pressure' and 'thermocycling' (TC) factors were considered (n = 10; n = 10 per group): Control (no air-abrasion); Al2.5; Si2.5; Al3.5; Si3.5; Control(TC); Al2.5(TC); Si2.5(TC); Al3.5(TC); Si3.5(TC). After silane application, resin cement (Panavia F2.0) was bonded and polymerized. Specimens were thermocycled (6.000 cycles, 5-55 degrees C) and subjected to SBS (1 mm/min). Data were analyzed using ANOVA, Tukey's and Dunnett tests (5%). Results. 'Particle' (p = 0.0001) and 'pressure' (p = 0.0001) factors significantly affected the SR. All protocols significantly increased the SR (Al2.5: 0.45 +/- 0.02; Si2.5: 0.39 +/- 0.01; Al3.5: 0.80 +/- 0.01; Si3.5: 0.64 +/- 0.01 mu m) compared to the control group (0.16 +/- 0.01 mu m). For SBS, only 'particle' factor significantly affected the results (p = 0.015). The SiO2 groups presented significantly higher SBS results than Al2O3 (Al2.5: 4.78 +/- 1.86; Si2.5: 7.17 +/- 2.62; Al3.5: 4.97 +/- 3.74; Si3.5: 9.14 +/- 4.09 MPa) and the control group (3.67 +/- 3.0 MPa). All TC specimens presented spontaneous debondings. SEM analysis showed that Al2O3 created damage in zirconia in the form of grooves, different from those observed with SiO2 groups. Conclusions. Air-abrasion with 110 mu m Al2O3 resulted in higher roughness, but air-abrasion protocols with SiO2 promoted better adhesion.

Control of cardiorespiratory function in response to hypoxia in an air-breathing fish, the African sharptooth catfish, Clarias gariepinus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)