Cytotoxicity evaluation of three pairs of hexabromocyclododecane (HBCD) enantiomers on Hep G2 cell

Hexabromocyclododecanes (HBCDs) are additive brominated flame retardants mainly used in plastics and textiles. At the present time, these compounds are found in almost all environmental and human samples. In order to evaluate the environmental safety and health risk of HBCDs, the enantiomerically pure alpha-, beta-, and gamma-HBCD were prepared using high performance liquid chromatography (HPLC) on a PM-P-CD column and the cytotoxicities of their enantiomers were evaluated in Hep G2 cells. Results from the 3-(4,5-dimethylthioazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT), resazurin reduction and lactate dehydrogenase (LDH) release assays showed a good agreement that the order of cytotoxicity was gamma-HBCD >= beta-HBCD > alpha-HBCD, and that significantly lower cell viability and higher LDH release were observed in all (+)-enantiomers ((+) alpha-, (+) beta- and (+) gamma-HBCD) than the corresponding (-)-forms ((-) alpha-, (-) beta- and (-) gamma-HBCD). Additionally, the formation of reactive oxygen species (ROS) induced by these HBCD enantiomers were detected. The positive correlation between the LDH release and ROS formation demonstrated that the toxic mechanism might be mediated by oxidative damage. These results suggest that environmental and human health risks of HBCDs must be evaluated at the level of individual enantiomers. (C) 2008 Published by Elsevier Ltd.

Determinations of residual furazolidone and its metabolite, 3-amino-2-oxazolidinone (AOZ), in fish feeds by HPLC-UV and LC-MS/MS, respectively

The antibacterial drug furazolidone belonging to the group of nitrofuran antibacterial agents has been widely used as an antibacterial and antiprotozoal feed additive for poultry, cattle, and farmed fish in China. During application a large proportion of the administered drug may reach the environment directly or via feces. Although the use of furazolidone is prohibited in numerous countries, there are indications of its illegal use. It is known that furazolidone can be rapidly metabolized to 3-amino-2-oxazolidinone (AOZ) in the body of the target organism. In this study, a total of 21 fish feed samples, including 17 commercial fish feeds from local markets in China (representing 15 different formulations) and 4 fish feeds obtained from Germany and Turkey, respectively, are analyzed to determine whether the drug is still illegally used or commercially available feeds are contaminated by this drug. High-performance liquid chromatography (HPLC) and liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) methods have been implemented to determine furazolidone and its metabolite AOZ in fish feeds containing animal protein, respectively. An efficient and convenient cleanup method for the determination of furazolidone in fish feeds is developed, and a simple cleanup method for the determination of AOZ is used. Method recoveries for samples used were determined as 87.7-98.3% for furazolidone at two spike levels of 2.0 and 5.0 ng g(-1) and as 95.6-102.8% for AOZ at spike levels of 0.4 and 0.8 ng g(-1). Limits of detections were 0.4 ng g(-1) for furazolidone and 0.05 ng g(-1) for AOZ. The established methods are therefore suitable for the determination of furazolidone and its metabolite AOZ in fish feeds at trace contamination levels. Using the established methods, all fish feed samples have been proved to be furazolidone negative; however, AOZ is tested in 16 of 17 fish feeds obtained from local markets in the Hubei province of China, with a positive rate as high as 94.1%.

Robotic body extension based on hot melt adhesives

The capability of extending body structures is one of the most significant challenges in the robotics research and it has been partially explored in self-reconfigurable robotics. By using such a capability, a robot is able to adaptively change its structure from, for example, a wheel like body shape to a legged one to deal with complexity in the environment. Despite their expectations, the existing mechanisms for extending body structures are still highly complex and the flexibility in self-reconfiguration is still very limited. In order to account for the problems, this paper investigates a novel approach to robotic body extension by employing an unconventional material called Hot Melt Adhesives (HMAs). Because of its thermo-plastic and thermo-adhesive characteristics, this material can be used for additive fabrication based on a simple robotic manipulator while the established structures can be integrated into the robot's own body to accomplish a task which could not have been achieved otherwise. This paper first investigates the HMA material properties and its handling techniques, then evaluates performances of the proposed robotic body extension approach through a case study of a "water scooping" task. © 2012 IEEE.

Synthesis of composite AIN powder mixed with sintering additives by the Lanxide method

Composite AlN powder, mixed with the sintering additive Y2O3, was synthesized by the direct nitridation of molten Al-Mg-Y alloys. The character of products was determined by means of electron microscopy, X-ray diffraction, granularmetric analysis and chemical composition analysis etc. The results show that the nitridation rate of the raw alloys is higher, and the nitridation products axe porous enough to be easily crushed. Composite AlN powder, obtained by the Lanxide method, has excellent characters such as high purity, especially low oxygen content, and narrow well-distributed grain size and so on.

Effect of fabrication conditions on I-V properties for ZnO varistor with high concentration additives by sol-gel technique

Polycrystalline nano-grain-boundary multi-doping ZnO-based nonlinear varistors with higher concentration additives have been fabricated by sol-gel and standard solid-state reaction method, of which the best sample has a very high threshold voltage of E-b = 3300 V/mm. The effect of sintering processes, sintering temperature and sintering time, and that of additive concentration of Bi2O3 on E-b of the samples are systematically investigated. The results show that the great merit of sol-gel method is its high threshold voltage obtained by a lower sintering temperature than the solid-state reaction method. The present work also shows that five phases including solid-state sintering, rich Bi liquid phase formation and ZnO as well as other additive dissolution, ZnO grain growth, the secondary phase sufficient formation and evolution have been experienced at different sintering temperatures. The hole type defect and nonhomogeneity of the microstructure will lead to the decrease of threshold voltage, i.e., the grain size and the homogeneity of the material will be important factors and directly affect the characteristic of the varistor. The sintering characteristic and the influence of Bi2O3 content on the threshold voltage are also discussed. (c) 2004 Elsevier B.V. All rights reserved.

Low-temperature growth of cubic GaN by metalorganic chemical-vapor deposition

Low-temperature growth of cubic GaN at 520 degrees C was achieved using CCl4 as an additive by metalorganic chemical-vapor deposition (MOCVD) on GaAs substrate. X-Ray measurement confirmed that the films are single-phase cubic GaN. Scanning electron microscopy (SEM) and reflection high-energy electron diffraction (RHEED) were also used to analyze the surface morphology and the quality of films. The evolution of surface morphology suggests that CCl4 can reduce the hopping barrier and thus Ga adatoms are able to diffuse easily on the GaN surface. (C) 1998 Elsevier Science S.A. All rights reserved.

匿名凭证与匿名口令认证技术研究

随着隐私保护越来越为人们所关注，对匿名认证技术的研究已经成为学术领域的一个热点。本文主要着眼于匿名认证中的匿名凭证与匿名口令认证密钥协商。 在对匿名凭证技术的研究中，本文重点分析了防止凭证出借与凭证匿名更新两个匿名凭证系统性质的实现。 凭证出借是指匿名凭证系统中，用户可以随意将自己的凭证与他人共享，从而使多人可以同时使用一个凭证。本文提出一种新的防止凭证出借方法，并给出一个具体的实现方案。该方法将凭证出借与用户隐私联系起来，通过凭证本身实现防止凭证出借。凭证匿名更新则是指凭证内容进行更新时，凭证颁发方只能知道变更的内容信息，不知道其他任何信息。本文提出一种新的实现方法，在原有凭证的基础上，用相对较少的计算量来实现对凭证内容的更新，使用户匿名得到一个新的凭证。 在对匿名口令认证密钥协商的研究中，本文首先提出了两个攻击方案：针对Shin等人的TAP(t≥2)协议的内部假扮攻击和针对TAP(t≥2)协议以及Viet等人的k-out-of-n APAKE协议的离线字典攻击。前者破坏了协议的认证性，内部攻击者可以假扮服务器与用户建立会话密钥。后者破坏了协议最基本的对口令的安全保护，使得内部攻击者可以离线猜测组内所有用户口令。然后，本文提出了一个新的两方的匿名口令认证密钥协商协议：NAPAKE，并在Square Computational Diffiee-Hellman困难假设以及Decision Inverted-Additive Diffie-Hellman困难假设下证明其安全性。同时，还进一步将其扩展为D-NAPAKE协议，以实现多方的匿名口令认证密钥协商，该协议可以抵抗上面的两个攻击。

Synthesis and random laser application of ZnO nano-walls: a review

This review paper summarises briefly some important achievements of our recent research on the synthesis and novel applications of nanostructure ZnO such as honeycomb shaped 3-D (dimension) nano random-walls. A chemical reaction/vapour transportation deposition technique was employed to fabricate this structure on ZnO/SiO2/Si substrate without any catalyst and additive in a simple tube furnace to aim the low-cost and high qualified samples. Random laser action with strong coherent feedback at the wavelength between 375 nm and 395 nm has been firstly observed under 355 nm optical excitation with threshold pumping intensity of 0.38 MW/cm(2).

Harmonic mode-locked ytterbium-doped fibre ring laser

We demonstrate a harmonic mode-locked ytterbium-doped fibre ring laser, which consists of a polarization-sensitive isolator, two polarization controllers, two 976 nm laser diodes as the pump source and a two-segment ytterbium-doped fibre. Utilizing an additive pulse mode-locked technique based on nonlinear polarization evolution, the ytterbium-doped fibre laser can operate in mode-locked state by adjusting the position of polarization controllers. The cavity fundamental repetition rate is 23.78 MHz. We also observe the second- and third-harmonic mode locking in the normal dispersion region, and their repetition rates are 47.66 MHz and 71.56 MHz, respectively. Over-driving of the saturable absorber in the harmonic mode-locking pulse is analysed and discussed in detail.

黄土丘陵区延河流域潜在植被分布预测与制图

潜在植被的分布预测与制图对植被恢复规划具有重要的指导价值.利用广义相加模型(generalized additive model,GAM),结合GIS空间分析技术和环境梯度分层采样技术,为延河流域24个地带性物种建立了分布模型,并在考虑群落内部物种种间关系及其分布概率的基础上,对物种分布进行运算,模拟预测了延河流域37种植物群落的分布状况和延河流域的潜在植被分布.结果表明:研究区植被分布预测值与实际调查值间的差异不显著,预测的植被空间分布较好地反映了延河流域潜在的植被分布状况,表明该模型具有较好的预测能力,对于区域植被恢复的目标设定和恢复规划具有重要意义.

Sequential coupling transport for the dark current of quantum dots-in-well infrared photodetectors

The dark current characteristics and temperature dependence for quantum dot infrared photodetectors have been investigated by comparing the dark current activation energies between two samples with identical structure of the dots-in-well in nanoscale but different microscale n-i-n environments. A sequential coupling transport mechanism for the dark current between the nanoscale and the microscale processes is proposed. The dark current is determined by the additive mode of two activation energies: E-a,E-micro from the built-in potential in the microscale and E-a,E-nano related to the thermally assisted tunneling in nanoscale. The activation energies E-a,E-micro and E-a,E-nano decrease exponentially and linearly with increasing applied electric field, respectively.

Brownian dynamics simulation of the crystallization dynamics of charged colloidal particles

Crystal formation process of charged colloidal particles is investigated using Brownian dynamics (BD) simulations. The particles are assumed to interact with the pair-additive repulsive Yukawa potential. The time evolution of crystallization process and the crystal structure during the simulation are characterized by means of the radial distribution functions (RDF) and mean square displacement (MSD). The simulations show that when the interaction is featured with long-range, particles can spontaneously assemble into body-centered-cubic (BCC) arrays at relatively low particle number density. When the interaction is short-ranged, with increasing the number density particles become trapped into a stagnant disordered configuration before the crystallization could be actualized. The simulations further show that as long as the trapped configurations are bypassed, the face-centered-cubic (FCC) structures can be achieved and are actually more stable than BCC structures. (C) 2010 Elsevier Inc. All rights reserved.