ANTISYMMETRIC ELEMENTS IN GROUP RINGS II

Let R be a commutative ring, G a group and RG its group ring. Let phi : RG -> RG denote the R-linear extension of an involution phi defined on G. An element x in RG is said to be phi-antisymmetric if phi(x) = -x. A characterization is given of when the phi-antisymmetric elements of RG commute. This is a completion of earlier work.

Lie properties of symmetric elements in group rings

Let * be an involution of a group G extended linearly to the group algebra KG. We prove that if G contains no 2-elements and K is a field of characteristic p, 0 2, then the *-symmetric elements of KG are Lie nilpotent (Lie n-Engel) if and only if KG is Lie nilpotent (Lie n-Engel). (C) 2008 Elsevier Inc. All rights reserved.

Nuclear elements of degree 6 in the free alternative algebra

We construct five new elements of degree 6 in the nucleus of the free alternative algebra. We use the representation theory of the symmetric group to locate the elements. We use the computer algebra system ALBERT and an extension of ALBERT to express the elements in compact form and to show that these new elements are not a consequence of the known clegree-5 elements in the nucleus. We prove that these five new elements and four known elements form a basis for the subspace of nuclear elements of degree 6. Our calculations are done using modular arithmetic to save memory and time. The calculations can be done in characteristic zero or any prime greater than 6, and similar results are expected. We generated the nuclear elements using prime 103. We check our answer using five other primes.

Use of copper and gold electrodes as sensitive elements for fabrication of an electronic tongue: Discrimination of wines and whiskies

A low-cost method is proposed to classify wine and whisky samples using a disposable voltammetric electronic tongue that was fabricated using gold and copper substrates and a pattern recognition technique (Principal Component Analysis). The proposed device was successfully used to discriminate between expensive and cheap whisky samples and to detect adulteration processes using only a copper electrode. For wines, the electronic tongue was composed of copper and gold working electrodes and was able to classify three different brands of wine and to make distinctions regarding the wine type, i.e., dry red, soft red, dry white and soft white brands. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.

Knowledge translation in Uganda : a qualitative study of Ugandan midwives' and managers' perceived relevance of the sub-elements of the context cornerstone in the PARIHS framework

BACKGROUND: A large proportion of the annual 3.3 million neonatal deaths could be averted if there was a high uptake of basic evidence-based practices. In order to overcome this 'know-do' gap, there is an urgent need for in-depth understanding of knowledge translation (KT). A major factor to consider in the successful translation of knowledge into practice is the influence of organizational context. A theoretical framework highlighting this process is Promoting Action on Research Implementation in Health Services (PARIHS). However, research linked to this framework has almost exclusively been conducted in high-income countries. Therefore, the objective of this study was to examine the perceived relevance of the subelements of the organizational context cornerstone of the PARIHS framework, and also whether other factors in the organizational context were perceived to influence KT in a specific low-income setting. METHODS: This qualitative study was conducted in a district of Uganda, where focus group discussions and semi-structured interviews were conducted with midwives (n = 18) and managers (n = 5) within the catchment area of the general hospital. The interview guide was developed based on the context sub-elements in the PARIHS framework (receptive context, culture, leadership, and evaluation). Interviews were transcribed verbatim, followed by directed content analysis of the data. RESULTS: The sub-elements of organizational context in the PARIHS framework--i.e., receptive context, culture, leadership, and evaluation--also appear to be relevant in a low-income setting like Uganda, but there are additional factors to consider. Access to resources, commitment and informal payment, and community involvement were all perceived to play important roles for successful KT. CONCLUSIONS: In further development of the context assessment tool, assessing factors for successful implementation of evidence in low-income settings--resources, community involvement, and commitment and informal payment--should be considered for inclusion. For low-income settings, resources are of significant importance, and might be considered as a separate subelement of the PARIHS framework as a whole.

Green logistics: key elements for a well-functioning sustainable logistics system

A growing awareness of the modern society about the direct relationship between a growing global community with increasing total industrial activities on one hand and various environmental problems and a natural limitation of natural resources on the other hand set the base for sustainable or “green” approaches within the supply chain. This paper therefore will look at the issue of “Green Logistics” which seeks to reduce the environmental impact of logistics activities by taking into account functions such as recycling, waste and carbon emission reduction and the use of alternative sources of energy. In order to analyze how these approaches and ideas are being perceived by the system as a whole two models from the area of prospective and scenario planning are being used and described to identify the main drivers and tendencies within the system in order to create feasible hypothesis. Using the URCA/CHIVAS model allows us to identify the driver variables out of a high number of variables that best describe the system “Green Logistics”. Followed by the analysis of the actor’s strategies in the system with the Mactor model it is possible to reduce the complexity of a completely holistic system to a few key drivers that can be analyzed further on. Here the implications of URCA/CHIVAS and Mactor are being used to formulate hypotheses about the perception of Green Logistics and its successful implementation among logistics decision makers by an online survey. This research seeks to demonstrate the usefulness of scenario planning to a highly complex system observing it from all angles and extracting information about the relevant factors of it. The results of this demonstration indicate that there are drivers much beyond the factory walls that need to be considered when implementing successfully a system such as Green Logistics.

Illegitimate identity in the middle of an ideological crisis and tensions in the consumption network: a study on why plus-size fashion brands are illegitimate fashion elements

O presente trabalho explora as causas pelas quais o campo da moda plus size carece de legitimidade com as consumidoras plus size. Eu explorei o assunto em três artigos. No primeiro, eu estudo o processo de legitimação de um novo mercado emergente, o mercado da moda plus size brasileira e os desafios para sua a institucionalização. Eu conduzi dezessete entrevistas com consumidoras plus size, uma netnografia em quatro blogs de moda plus size brasileiros e analisei de maneira semiótica um site que vende roupas de moda plus size. Meus resultados indicam que, apesar de ter atores legítimos que promovem essas marcas de moda plus size, o campo da moda plus size ainda é percebido como uma versão vergonhosa do campo da moda. Defendo aqui que o fato de uma das lógicas de campo da moda plus size ser estigma, acaba afetando os projetos identitários das consumidoras de maneira depreciativa, de forma elas não se envolvem em práticas de capital cultural que ocorrem dentro do campo da moda plus size. No segundo artigo, eu conduzi uma introspecção genealógica em que eu pesquisei questões de identidade. Como uma mulher (que se assume ) plus size, eu imaginei que seria relevante para olhar para dentro de mim mesma, a fim de explorar a forma como a minha identidade liga-se com a rede semiótica-material que me rodeia em termos de moda, alimentos e outros elementos. Meus dados vieram tanto de técnicas de introspecção simultâneas, quanto retrospectivas. Em termos teóricos, eu usei a ideia de ―assemblages‖ e eu foquei minha análise tanto nos aspectos materiais da minha rede de consumo, quanto na estabilidade da rede. As consequências da minha assemblage estão ligadas a uma gestão de qualidade total da minha identidade, tanto online como off-line, refletidas em práticas de consumo que se conectam à ideia de uma lógica de consumo bulímica em que o consumo de alimentos e gestão corpo estão interligadas. Por fim, no meu terceiro artigo, eu explorei o conceito de identidade a partir do consumo da moda feminina plus size. Foram feitas catorze entrevistas fenomenológicas, cujos dados foram analisados a partir de uma perspectiva hermenêutica. Três categorias temáticas emergiram da análise de dados: a construção da identidade por meio da moda, elementos de identidade plus size e estratégias criativas para lidar com a falta de produtos para mulheres plus size no varejo. Entre os principais resultados, destacam-se a forma como o termo plus size atua como estigma, influenciando projetos de identidade das consumidoras, o papel do varejo no processo de estigmatização e a saga épica de compras, que envolve um "mercado negro", com a participação de vendedores. Eu concluo discutindo o papel da identidade na instabilidade do campo da moda plus size.

Diffusion of Interstitial Elements in Ti Alloys used as Biomaterials

Titanium alloys are excellent implant materials for orthopedic applications due to their desirable properties, such as good corrosion resistance, low elasticity modulus, and excellent biocompatibility. The presence of interstitial elements (such as oxygen and nitrogen) causes strong changes in the material's mechanical properties, mainly in its elastic properties. Study of the interaction among interstitial elements present in metals began with Snoek's postulate, that a stress-induced ordering of interstitials gives rise to a peak in the mechanical relaxation (internal friction) spectra. In the mechanical relaxation spectra, each species of interstitial solute atom gives rise to a distinct Snoek's peak, whose temperature and position depend on the measurement frequency. This effect is very interesting because its peculiar parameters are directly related to the diffusion coefficient (D) for the interstitial solute. This paper presents a study of diffusion of heavy interstitial elements in Ti-35Nb-7Zr-5Ta alloys using mechanical spectroscopy. Pre-exponential factors and activation energies are calculated for oxygen and nitrogen in theses alloys.

The Quasi-lattice of Indiscernible Elements

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prolapse-free relativistic Gaussian basis sets for the superheavy elements up to Uuo (Z=118) and Lr (Z=103)

Prolapse-free basis sets suitable for four-component relativistic quantum chemical calculations are presented for the superheavy elements UP to (118)Uuo ((104)Rf, (105)Db, (106)Sg, (107)Bh, (108)Hs, (109)Mt, (110)Ds, (111)Rg, (112)Uub, (113)Uut, (114)Uuq, (115)Uup, (116)Uuh, (117)Uus, (118)Uuo) and Lr-103. These basis sets were optimized by minimizing the absolute values of the energy difference between the Dirac-Fock-Roothaan total energy and the corresponding numerical value at a milli-Hartree order of magnitude, resulting in a good balance between cost and accuracy. Parameters for generating exponents and new numerical data for some superheavy elements are also presented. (c) 2007 Elsevier B.V. All rights reserved.

Modeling of interfaces in two-dimensional problems using solid finite elements with high aspect ratio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A mixture theory based method for three-dimensional modeling of reinforce concrete members with embedded crack finite elements

The paper presents a methodology to model three-dimensional reinforced concrete members by means of embedded discontinuity elements based on the Continuum Strong Discontinuous Approach (CSDA). Mixture theory concepts are used to model reinforced concrete as a 31) composite material constituted of concrete with long fibers (rebars) bundles oriented in different directions embedded in it. The effects of the rebars are modeled by phenomenological constitutive models devised to reproduce the axial non-linear behavior, as well as the bond-slip and dowel action. The paper presents the constitutive models assumed for the components and the compatibility conditions chosen to constitute the composite. Numerical analyses of existing experimental reinforced concrete members are presented, illustrating the applicability of the proposed methodology.

The definition of potential infiltration areas in Guaratingueta watershed, Paraiba do Sul Basin, Southeastern Brazil: an integrated approach using physical and land-use elements

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)