987 resultados para 386


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The wear rate of the dual-phase steel ABNT-1020 tempered at 450°C sliding against cemented steel ABNT-1020 in function of load value is investigated in wide load range. The alteration in behavior of this function at intermediate load level, like in the case of low hardness steel sliding against high hardness steel, is observed. The analysis by scanning electronic microscope before and after this alteration showed a change of wear mechanism from plastic displacement to embrittlement.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Purpose: This investigation studied the effects of 3 surface treatments on the shear bond strength of a light-activated composite resin bonded to acrylic resin denture teeth. Materials and Methods: The occlusal surfaces of 30 acrylic resin denture teeth were ground flat with up to 400-grit silicon carbide paper. Three different surface treatments were evaluated: (1) the flat ground surfaces were primed with methyl methacrylate (MMA) monomer for 180 seconds; (2) light-cured adhesive resin was applied and light polymerized according to the manufacturer's instructions; and (3) treatment 1 followed by treatment 2. The composite resin was packed on the prepared surfaces using a split mold. The interface between tooth and composite was loaded at a cross-head speed of 0.5 mm/min until failure. Results: Analysis of variance indicated significant differences between the surface treatments. Results of mean comparisons using Tukey's test showed that significantly higher shear bond strengths were developed by bonding composite resin to the surfaces that were previously treated with MMA and then with the bonding agent when compared to the other treatments. Conclusion: Combined surface treatment of MMA monomer followed by application of light-cured adhesive resin provided the highest shear bond strength between composite resin and acrylic resin denture teeth.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Commonly grown in tropical and sub-tropical regions, guava (Psidium guajava L.) is an important fruit crop of Brazil. It is cultivated on a large scale in São Paulo state, and covers about 6,500 hectares. As a result of the guava selection program developed at FCAV/UNESP, two new cultivars were created: 'Rica' and 'Paluma' with a high productivity, and also with higher nutritional requirement. Leaves analysis has become a powerful tool in mineral-nutrition research with fruit crops, not only to determine response to different nutrients, but also for diagnostic techniques in making fertilizer recommendations and assessing deficiency symptoms. Nutrient composition of the leaves varies depending on the leaf maturity, tree age, variety and nutrient supply. For the interpretation of analytical values, selection of the index tissue is important. The results of experiments conducted in the field during 1989-2000 were studied. The nutritional status was evaluated by annual leaf sampling, carried out at full bloom. Recent fully developed leaves, corresponding to the third pair (with the petiole) were collected, starting at the end of the branch, all around the tree, at a height of 1.5 m from the soil, with a total of 30 leaf pairs per sample. The yield was evaluated by weighing all the fruits in the useful area of each lot. Foliar chemical analysis showed excellent correlation with the fruit production. Through the results it was verified that the maximum yield was associated to the following levels: N = 22-26; P = 1.5-1.9; K = 17-20; Ca = 11-15; Mg = 2.5-3.5; S = 3.0-3.5 g kg -1; B = 20-25; Cu = 10-40; Fe = 50-150; Mn = 180-250; Zn = 25-35 mg kg-1 DW in the leaves of the 'Rica' guava and to N = 20-23; P = 1.4-1.8; K = 14-17; Ca = 7-11; Mg = 3.4-4.0; S = 2.5-3.5 g kg-1; B = 20-25; Cu = 20-40; Fe = 60-90; Mn = 40-80; Zn = 25-35 mg kg-1 DW in the leaves of the 'Paluma' guava.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objective: To measure 2-week postoperative sensitivity in Class II composite restorations placed with a self-etching adhesive (Clearfil SE Bond) or a total-etch adhesive (Prime&Bond NT) with or without a flowable composite as cervical increment. Method and materials: Upon approval by the University of Guarulhos Committee on Human Subjects, 100 restorations were inserted in 46 patients who required Class II restorations in their molars and premolars. Enamel and dentin walls were conditioned with a self-etching primer (for Clearfil SE Bond) or etched with 34% phosphoric acid (for Prime&Bond NT). A 1- to 2-mm-thick increment of a flowable composite (Filtek Flow) was used in the proximal box in 50% of the restorations of each adhesive. Preparations were restored with a packable composite (Surefil). The restorations were evaluated preoperatively and 2 weeks postoperatively for sensitivity to cold, air, and masticatory forces using a visual analog scale. Marginal integrity of the accessible margins was also evaluated. Statistical analysis used a mixed linear model with subject as a random effect. Results: Ninety-eight teeth from 44 subjects were observed at 2 weeks. The type of adhesive and use of flowable composite had no significant effects or interaction for any of the four outcomes of interest, ie, change from baseline to 2 weeks in sensitivity and response time for the cold or air stimulus. For the air stimulus, the overall average change from baseline was not significant for either sensitivity or response time. For the cold stimulus, the overall average change from baseline was significant for both sensitivity and response time. No case of sensitivity to masticatory forces was observed. Conclusion: No differences in postoperative sensitivity were observed between a self-etch adhesive and a total-etch adhesive at 2 weeks. The use of flowable composite did not decrease postoperative sensitivity.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objective: This study evaluated the effectiveness of proximal contacts in Class II restorations using two types of matrix bands (steel and polyester) with two different restoration techniques (incremental and with prepolymerized particles). Method and materials: Eighty-eight Class II adjacent restorations using Prodigy resin composite were performed: 44 with the incremental technique (22 with steel matrix bands, 22 with polyester matrix bands) and 44 utilizing prepolymerized resin particles (22 steel matrix, 22 polyester matrix). The restorations were clinically evaluated at baseline and at 6, 12, and 18 months. Proximal contacts obtained immediately after restoration procedure in all restorations were satisfactory. Results: No statistically significant alterations were found in 18 months of evaluation. Conclusion: Regardless of the utilized resin composite, there were no differences in the amount of proximal contact variations with respect to tested techniques and matrices.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Bryconamericus turiuba, new species, is described from the upper Rio Paraná system in Brazil. It differs from all congeners in the following combination of characters: 15-20 branched anal-fin rays; four or five scales in a transverse series from the dorsal-fin origin to the lateral line; shallow body (depth 23.6-30.6% of SL); 37-43 perforated lateral line scales; first, third, and fifth or, more rarely, first and fourth outer premaxillary tricuspid teeth projecting anteriorly; two to five tricuspid to pentacuspid maxillary teeth; dentary with three or four tricuspid or pentacuspid large teeth, followed by five to seven smaller conical to tricuspid teeth; a conspicuous dark, vertically elongate humeral spot, extending to below the lateral line; a dark dorsal stripe extending from the supraoccipital spine to the caudal peduncle with a gap at the adipose-fin base; caudal-fin lobes without conspicuous markings, uniformly pigmented along rays; mature males lacking hooks on the pelvic- and anal-fin rays. The new species is compared with the Bryconamericus species described from the basins of the Rio Paraná, Rio Paraguay, Rio São Francisco, and coastal Brazilian rivers. © 2005 by the American Society of Ichthyologists and Herpetologists.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study was carried out in the city of Araraquara (SP, Brazil), where 1829 people selected randomly from 42 districts were interviewed with regard to their use of medicines, in particular whether and how they read the insert information sheet and the most frequently read items and problems encountered in the text. Surveys were performed in two stages, the first when package inserts were regulated in Brazil by Portaria SVS 110/1997 (Ministry of Health directive) and the second after the new regulation (RDC 140/2003) came into force. Out of 1829 people interviewed, 1597 reported using some medicine. The markedly similar results in both stages of the research pointed to the difficulties encounteved in reading the package inserts, due to the small letters, the obscure language and the massive amount of information. This paper shows that package inserts of medicines need to be simpler, so the patients have an idea of the importance of the medicine and are able to realize soon any problem that might appear due to the use of the medicine and what action they should take. Furthermore, it will be helpful to the evaluation of the package inserts of medicines, elaborated in conformity with RDC 140, if they work effectively as a source of information and guidance for the patient are not simply given a new layout, while maintaining items that impede their understanding and use.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We present a study of eeγ and μμγ events using 1109 (1009) pb-1 of data in the electron (muon) channel, respectively. These data were collected with the DØ detector at the Fermilab Tevatron p over(p, ̄) collider at sqrt(s) = 1.96   TeV. Having observed 453 (515) candidates in the eeγ (μμγ) final state, we measure the Zγ production cross section for a photon with transverse energy ET > 7   GeV, separation between the photon and leptons Δ Rℓ γ > 0.7, and invariant mass of the di-lepton pair Mℓ ℓ > 30   GeV / c2, to be 4.96 ± 0.30 (stat . + syst .) ± 0.30 (lumi .)   pb, in agreement with the Standard Model prediction of 4.74 ± 0.22   pb. This is the most precise Zγ cross section measurement at a hadron collider. We set limits on anomalous trilinear Zγγ and ZZγ gauge boson couplings of - 0.085 < h30 γ < 0.084, - 0.0053 < h40 γ < 0.0054 and - 0.083 < h30 Z < 0.082, - 0.0053 < h40 Z < 0.0054 at the 95% C.L. for the form-factor scale Λ = 1.2   TeV.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The mineralogical composition of the soil plow layer (0-20 cm) was analyzed for the following soil suborders (according to the Brazilian soil taxonomy): Neossolo Quartzarênico. Argissolo Vermelho-Amarelo, Cambissolo Háplico and Latossolo Vermelho-Amarelo which samples were collected from different regions of the Ceará State. The present study had the objectives of identifying potential sources of both total and non-exchangeable potassium forms for plants located at the different soil fractions. Then highest content of K occurred in the Cabissolo Háplico soil, including both the total and non-exchangeable K forms. In the Neossolo Quartzarênico. Argissolo Vermelho-Amarelo and Latossolo Vermelho-Amarelo, the highest contents of both forms of potassium were impregnated at the sand fraction. The amount of potassium found in the both sand and silt fractions has its origin in the orthoclase mineral which was detected in the mineralogical analysis. In the clay fractio, the origin of the potassium is illite and a inter-stratified mineral (mica+montmorillonite). As compared with the total content, the amount of non-exchangeable potassium is low for all the four soils. It was more concentrated at clay fraction of the Cambissolo soil. The potassium content sequence in the soil was the following: Cambissolo Háplico > Argissolo Vermelho-Amarelo > Neossolo Quartzarênico > Latossolo Vermelho-Amarelo. The results showed that the distribution of the forms of potassium among the soils differ as a function of the nature of the dominating minerals detected in the mineralogical analysis (illite and orthoclase) which was discussed above.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Japanese Brazilian population has one of the highest prevalences of diabetes worldwide. Despite being non-obese according to standard definitions, their body fat distribution is typically central. We investigated whether a subset of these subjects had autoantibodies that would suggest a slowly progressive form of type 1 diabetes. A total of 721 Japanese Brazilians (386 men) in the 30- to 60-year age group underwent clinical examination and laboratory procedures, including a 75-g oral glucose tolerance test and determinations of serum autoantibodies. Antibodies to glutamic acid decarboxylase (GADab) were determined by radioimmunoassay and to thyroglobulin (TGab) and thyroperoxidase (TPOab) by flow-cytometry assays. Mean body mass index was 25.2 ± 3.8 kg/m2, but waist circumference was elevated according to the Asian standards. Diabetes, impaired glucose tolerance, and impaired fasting glycemia were found in 31%, 22%, and 22%, respectively, and 53% of the subjects had metabolic syndrome. Glutamic acid decarboxylase (GADab) was positive in 4.72%, TGab in 9.6%, and TPOab in 10% of the whole sample. When participants were stratified according to the presence of thyroid antibodies, similar frequencies of GADab were found in positive and negative groups. The prevalence rates of glucose metabolism disturbances did not differ between GADab positive and negative groups. Our data did not support the view that autoimmune injury could contribute to the high prevalence of diabetes seen in Japanese Brazilians, and the presence of co-morbidities included in the spectrum of metabolic syndrome favors the classification as type 2 diabetes.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The genetic variation in the growth of seven 19-year-old Liquidambar styraciflua provenances was studied in Paraguaçu Paulista, São Paulo State, Brazil. The trial was established in a complete randomized block design with seven provenances, four replications and twelve-tree square plots. Significant differences among provenances were detected for diameter at breast height, height and volume, indicating the possibility of increasing timber yield through selection of the most productive provenances. Genetic correlations between growth traits were high and statistically significant. The provenance from Finca las Victorias, Guatemala had the best and the provenance from Franklin, Virginia, United States the poorest performance for all traits. A growth comparison of Pinus caribaea var. bahamensis with the best provenance at the same site indicated that the potential of L. styraciflua for silviculture in the region of Paraguaçu Paulista is high.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The purpose of this study was to assess color alteration of the paints used for iris painting in artificial eyes. Five disks of heat cured acrylic resin were confectioned by microwave energy for each paint analyzed, in a total of 40 specimens. Each specimen consisted of a colorless acrylic resin disk and another of equal size, of scleral white colored acrylic resin, with the painting interposed between the two disks. The specimens were submitted to an accelerated aging process in a chamber under ultraviolet radiation for 1,008 hours. To assess color variation, a reflective spectrophotometer was used. The results were statistically analyzed by ANOVA and the Tukey test (p < 0.05). All the paints underwent chromatic alteration. The oil paint presented the highest resistance to accelerated aging.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Incluye Bibliografía

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Incluye Bibliografía

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Incluye Bibliografía