Effect of light sources and curing mode techniques on sorption, solubility and biaxial flexural strength of a composite resin

Adequate polymerization plays an important role on the longevity of the composite resin restorations. Objectives: The aim of this study was to evaluate the effect of light-curing units, curing mode techniques and storage media on sorption, solubility and biaxial flexural strength (BFS) of a composite resin. Material and Methods: Two hundred and forty specimens were made of one composite resin (Esthet-X) in a stainless steel mold (2 mm x 8 mm 0), and divided into 24 groups (n=10) established according to the 4 study factors: light-curing units: quartz tungsten halogen (QTH) lamp and light-emitting diodes (LED); energy densities: 16 J/cm(2) and 20 J/cm(2); curing modes: conventional (CM) and pulse-delay (PD); and permeants: deionized water and 75% ethanol for 28 days. Sorption and solubility tests were performed according to ISO 4049:2000 specifications. All specimens were then tested for BFS according to ASTM F394-78 specification. Data were analyzed by three-way ANOVA followed by Tukey, Kruskal-Wallis and Mann-Whitney tests (alpha=0.05). Results: In general, no significant differences were found regarding sorption, solubility or BFS means for the light-curing units and curing modes (p>0.05). Only LED unit using 16 J/cm(2) and PD using 10 s produced higher sorption and solubility values than QTH. Otherwise, using CM (16 J/cm(2)), LED produced lower values of BFS than QTH (p<0.05). 75% ethanol permeant produced higher values of sorption and solubility and lower values of BFS than water (p<0.05). Conclusion: Ethanol storage media produced more damage on composite resin than water. In general the LED and QTH curing units using 16 and 20 J/cm(2) by CM and PD curing modes produced no influence on the sorption, solubility or BFS of the tested resin.

Rheological Measurements and Thermal Characterization of Lamellar Gel Phase Emulsions Developed with Cetearyl Alcohol/Nonionic Ethoxylated Surfactants

The aim of this research was to characterize emulsion systems (ES) containing nonionic ethoxylated surfactants by using rheological, microscopic, and thermogravimetric assays. Three formulations were developed: ES-1: 8.0% (w/w) oleth-20; ES-2: 4.0% (w/w) oleth-20/4.0% (w/w) steareth-21; and ES-3: 8.0% (w/w) steareth-21. The systems showed typical non-Newtonian pseudo-plastic behavior. The presence of a lamellar gel phase was observed for all systems, with ES-2 being more pronounced. Through thermogravimetry, the profiles of the three systems were found to be similar, consisting of two main events, the first one being characterized by loss of water and, beyond 110 degrees C, by loss of the oil phase.

Clinical strategies for esthetic excellence in anterior tooth restorations: understanding color and composite resin selection

Direct composite resin restorations have become a viable alternative for patients that require anterior restorative procedures to be integrated to the other teeth that compose the smile, especially for presenting satisfactory esthetic results and minimum wear of the dental structure. Technological evolution along with a better understanding of the behavior of dental tissues to light incidence has allowed the development of new composite resins with better mechanical and optical properties, making possible a more artistic approach for anterior restorations. The combination of the increasing demand of patients for esthetics and the capacity to preserve the dental structure resulted in the development of different incremental techniques for restoring fractured anterior teeth in a natural way. In order to achieve esthetic excellence, dentists should understand and apply artistic and scientific principles when choosing color of restorative materials, as well as during the insertion of the composite resin. The discussion of these strategies will be divided into two papers. In this paper, the criteria for color and material selection to obtain a natural reproduction of the lost dental structures and an imperceptible restoration will be addressed.

Tigela, café e xícara: diversidade formal e dinâmicas de consumo na produção das louças brancas da cidade de São Paulo no começo do século XX

Este artigo apresenta algumas reflexões em torno das formas e volumes das louças em faiança fina produzidas, e consumidas, na cidade de São Paulo, durante o período de 1913 e 1937, relacionando-as a alguns hábitos levados a cabo na Paulicéia, como o crescente costume do "cafezinho". Para tal, parte-se das análises do acervo gerado pelo resgate do sítio arqueológico Petybon, localizado na zona metropolitana da cidade, no bairro da Lapa, região da Água Branca/Vila Romana. Aponta-se que a diversidade de formas das louças dialoga com os projetos de modernidade pensados para São Paulo e as demandas dos consumidores cujas diversas práticas culturais influenciaram na produção das faianças finas pela Fábrica de Louças Santa Catharina e Indústrias Reunidas Fábricas Matarazzo.

Revista do Museu Paulista e(m) capas: identidade e representação institucional em texto e imagem

Este artigo propõe reflexão sobre a escrita da história, a partir de estudo das capas da Revista do Museu Paulista, especialmente durante as gestões dos dois primeiros diretores da instituição, quando certa continuidade editorial foi preservada. Tomadas como "fontes", ou seja, objeto de trabalho do historiador, as capas revelam vestígios de processos que permitem reconstruir, em suas dimensões históricas, as complexas imbricações entre a produção da Revista, sua materialidade, e os atos de leitura e interpretação que condicionam e refletem relações entre produtores de textos e seus leitores nas primeiras décadas do século XX, a partir de São Paulo, onde era editada.

Representação política, representação de grupos e política de cotas: perspectivas e contendas feministas

Este artigo foca no debate sobre representação política, representação especial de grupos e política de cotas com o objetivo de destacar os seus argumentos principais e mais controversos, explorando suas inconsistências, problematizando-os e estabelecendo um diálogo entre eles. Será considerado até que ponto o argumento por maior inclusão de membros de grupos sociais não hegemônicos em processos político-decisórios, através de mecanismos como as cotas, pode ser justificado desde uma perspectiva normativa. Dado o caráter polêmico do conceito de representação política e da noção de identidades e interesses de grupos, em que se justificaria essa demanda? Esta discussão será conduzida a partir de uma análise sobre o conceito de representação política, da noção de interesses, identidades e perspectivas de grupos, e de uma análise sobre os principais argumentos apresentados a favor das cotas e contra elas. O artigo foca na representação política das mulheres, estabelecendo assim um diálogo permanente com e entre perspectivas feministas.

Nursing care time in the Intensive Care Unit: evaluation of the parameters proposed in COFEN Resolution Nº 293/04

This study aimed to evaluate the parameters established in COFEN Resolution 293/04 concerning nursing staff dimensioning in adult intensive care units (AICU). The research was conducted in six hospitals in São Paulo City. The daily quantitative average of professionals needed for patient care was calculated according to the parameters established by COFEN. The obtained results were compared with the existing number of daily staff members in these units. It was observed that the proportions recommended by COFEN for the nurse category are superior to those used in the hospitals studied, which represents a challenge for Brazilian nursing. Mean care time values were found appropriate and represent important standards for dimensioning the minimum number of professionals in AICU. This study contributed to the validation of the parameters indicated in Resolution 293/04 for nursing staff dimensioning in the AICU.

Knowledge management in health: a systematic literature review

Knowledge has been used as a resource for intelligent and effective action planning in organizations. Interest in research on knowledge management processes has intensified in different areas. A systematic literature review was accomplished, based on the question: what are the contributions of Brazilian and international journal publications on knowledge management in health? The sample totaled 32 items that complied with the inclusion criteria. The results showed that 78% of journals that published on the theme are international, 77% of researchers work in higher education and 65% have a Ph.D. The texts gave rise to five thematic categories, mainly: development of knowledge management systems in health (37.5%), discussion of knowledge management application in health (28.1%) and nurses' function in knowledge management (18.7%).

Evaluation of quality of life in a palliative care context: an integrative literature review

The use of scales that have been validated and standardized for different cultures is very useful for identifying demands in the field of Palliative Care and implementing the most appropriate care. This integrative literature review focuses on instruments assessing the Quality of Life of patients under Palliative Care through a journal search in electronic databases. The study consisted of 49 papers identified in Medline/PubMed, of which 18 met the inclusion criteria previously defined. Information concerning the selected studies is presented and later categorized, with a greater emphasis on the analysis of the psychometric properties of validations of the Palliative Outcome Scale, conducted in three countries. This review enabled the identification of instruments already developed and validated for different cultures, increasing the possibility of knowledge in the field.

Perioperative latex hypersensitivity reactions: an integrative literature review

This article characterizes hypersensitivity reactions during anesthetic-surgical procedures. This integrative literature review was conducted in the LILACS, CINAHL, COCHRANE and MEDLINE databases including papers published from 1966 to September 2011. A total of 17 case reports, two prevalence studies and one cohort study were identified. Latex reactions were mainly type III and the primary source of intraoperative reaction was latex gloves. The average time for clinical manifestation was 59.8 minutes after anesthetic induction; 44.4% of patients reported a reaction to latex at the pre-anesthetic evaluation. It was determined that the history of allergic reactions to latex obtained in the pre-anesthetic evaluation does not ensure the safety of patients if the staff is inattentive to the severity of the issue. There is also a tendency to initially attribute the anaphylactic event to the anesthetic drugs.

A new species of Cheiriphotis (Amphipoda, Corophiidae) from the southwestern Atlantic Ocean

A new species, Cheiriphotis petronioi sp. nov., is described from the Brazilian coast. This species is recognizable amongst its congeners by the carpus of adult male gnathopod 2 not fused with propodus and the palm acute and uropod 1 of adult males without a group of apical setae between rami. Specimens studied herein were collected between 23º and 34ºS (Brazil - São Paulo and Rio Grande do Sul) from 16 to 38 m depth. An updated key to all species of the genus is provided.

First record of the genus Ruffojassa Vader & Myers, 1996 (Amphipoda, Corophiidea) from Brazilian waters, with description of a new species

A new species, Ruffojassa petronioi sp. nov., is described from southern Brazilian coast. The new species was collected at 56 m depth at the coordinates 21º42'S / 40º15'W with a mini biological trawl aboard of R.V. Prof.W.Besnard. In this paper we recorded the genus for the first time from Brazilian waters.

Range extensions along western Atlantic for Epialtidae crabs (Brachyura, Majoidea) genera Acanthonyx Latreille, 1828 and Epialtus H. Milne Edwards, 1834

The present study provided information extending the known geographical distribution of three species of majoid crabs, the epialtids Acanthonyx dissimulatus Coelho, 1993, Epialtus bituberculatus H. Milne Edwards, 1834, and E. brasiliensis Dana, 1852. Specimens of both genera from different carcinological collections were studied by comparing morphological characters. We provide new data that extends the geographical distributions of E. bituberculatus to the coast of the states of Paraná and Santa Catarina (Brazil), and offer new records from Belize and Costa Rica. Epialtus brasiliensis is recorded for the first time in the state of Rio Grande do Sul (Brazil), and A. dissimulatus is reported from Quintana Roo, Mexico. The distribution of A. dissimulatus, previously known as endemic to Brazil, has a gap between the states of Espírito Santo and Rio de Janeiro. However, this restricted southern distribution is herein amplified by the Mexican specimens.

Análise tomográfica dos parâmetros anatômicos do áxis de crianças

OBJETIVO: Estudo anatômico do áxis através de tomografia computadorizada (TC) em crianças de dois a dez anos de idade, mensurando a angulação das lâminas, espessura e comprimento de lâminas e pedículos e espessura da massa lateral. MÉTODOS: Estudou-se 64 TCs da coluna cervical de indivíduos com idades entre 24 e 120 meses, de ambos os sexos e sem deformidades cervicais. Correlacionaram-se as variáveis estudadas com os grupos etários e sexo dos pacientes. A análise estatística foi realizada por meio do teste t. RESULTADOS: Verificou-se que na faixa etária entre 24-48 meses, 5,5% das lâminas e 8,3% dos pedículos possuem espessura menores do que 3,5mm, espessura necessária para colocação de um parafuso. Entre 49-120 meses não há lâminas com espessuras menores do que 3,5mm e 1,2% dos pedículos possuem espessura menor do que 3,5mm. Em ambos os grupos etários não há comprimento de lâminas e pedículos menores do que 12 mm e massas laterais maiores do que 12 mm. CONCLUSÃO: A análise das dimensões obtidas no estudo permite, na maioria dos casos, a colocação de parafusos de 3,5mm nas lâminas e pedículos do áxis de crianças. Nível de Evidência II, Desenvolvimento de critérios diagnósticos em pacientes consecutivos.