Potassium-doped Ni-MgO-ZrO catalysts for dry reforming of methane to synthesis gas

Ni/K-MgO-ZrO catalysts for dry reforming of methane, with a range of Mg/Zr ratios and each containing about 10 wt% Ni, were prepared via Ni nitrate impregnation on MgO-ZrO supports synthesized by co-precipitation using KCO. It was found that a proportion of the potassium of the precipitant remained in the samples and improved the stability of the catalysts in the reaction. It was also shown that reduction of the catalysts at 1,023 K without calcination in air is necessary for stable and high activity; calcination in air at 1,073 K gives a deterioration of the catalytic properties, leading to rapid deactivation during the reaction. The order of the CH conversions of the reduced catalysts after 14 h on stream was as follows: Ni/K-MgZr ~ Ni/K-Mg ≥ Ni/K-MgZr Ni/K-Zr. A catalyst with 0.95 wt% K on MgO-ZrO with a Mg:Zr mole ratio of 5:2 showed the best resistance to deactivation. Experiments in a microbalance system showed that there was only negligible coke deposition on the surface of this sample. This behaviour was attributed to the presence of Ni nanoparticles with a diameter of less than 10 nm located on a MgO/NiO solid solution shell doped by K ions; this in turn covers a core of tetragonal ZrO and/or a MgO/ZrO solid solution. This conclusion was supported by EDS/TEM, XPS, XRD and H chemisorption measurements. © 2013 Springer Science+Business Media New York.

Polycythaemia-inducing mutations in the erythropoietin receptor (EPOR):mechanism and function as elucidated by epidermal growth factor receptor-EPOR chimeras

Primary familial and congenital polycythaemia (PFCP) is a disease characterized by increased red blood cell mass, and can be associated with mutations in the intracellular region of the erythropoietin (EPO) receptor (EPOR). Here we explore the mechanisms by which EPOR mutations induce PFCP, using an experimental system based on chimeric receptors between epidermal growth factor receptor (EGFR) and EPOR. The design of the chimeras enabled EPOR signalling to be triggered by EGF binding. Using this system we analysed three novel EPOR mutations discovered in PFCP patients: a deletion mutation (Del1377-1411), a nonsense mutation (C1370A) and a missense mutation (G1445A). Three different chimeras, bearing these mutations in the cytosolic, EPOR region were generated; Hence, the differences in the chimera-related effects are specifically attributed to the mutations. The results show that the different mutations affect various aspects related to the signalling and metabolism of the chimeric receptors. These include slower degradation rate, higher levels of glycan-mature chimeric receptors, increased sensitivity to low levels of EGF (replacing EPO in this system) and extended signalling cascades. This study provides a novel experimental system to study polycythaemia-inducing mutations in the EPOR, and sheds new light on underlying mechanisms of EPOR over-activation in PFCP patients.

Reduced phospholipase A2 activity is not accompanied by reduced arachidonic acid release

Arachidonic acid release in cells highly over expressing cytosolic phospholipase A2 has been attributed to mitogen-activated protein kinase phosphorylation of cytosolic phospholipase A2 on serine-505. To investigate the role of cytosolic phospholipase A2 in cellular physiology, we attempted to inhibit cytosolic phospholipase A2 in the intact cell employing an antisense RNA strategy. Swiss 3T3 cells were stably transfected with an antisense cytosolic phospholipase A2 expression vector. A clone of cells with reduced immunodetectable cytosolic phospholipase A2, compared to a vector transfected cell line, was identified by Western blotting and a corresponding decrease in phospholipase A2 activity was confirmed by enzymatic assay in cell free extracts. However, arachidonic acid release from intact cells in response to agonists was not different between antisense and control cell lines. Thus, arachidonic acid release in intact cells with decreased cytosolic phospholipase A2 activity is likely to be modulated by rate limiting factors that are extrinsic to cytosolic phospholipase A2.

Re-challenge chemotherapy with gemcitabine plus carboplatin in patients with non-small cell lung cancer

Despite recent improvements to current therapies and the emergence of novel agents to manage advanced non-small cell lung cancer (NSCLC), the patients' overall survival remains poor. Re-challenging with first-line chemotherapy upon relapse is common in the management of small cell lung cancer but is not well reported for advanced NSCLC. NSCLC relapse has been attributed to acquired drug resistance, but the repopulation of sensitive clones may also play a role, in which case re-challenge may be appropriate. Here, we report the results of re-challenge with gemcitabine plus carboplatin in 22 patients from a single institution who had previously received gemcitabine plus platinum in the first-line setting and had either partial response or a progression-free interval of longer than 6 months. In this retrospective study, the charts of patients who underwent second-line chemotherapy for NSCLC in our cancer center between January 2005 and April 2010 were reviewed. All the patients who received a combination of gemcitabine and carboplatin for re-challenge were included in the study. These patients were offered second-line treatment on confirmation of clear radiological disease progression. The overall response rate was 15% and disease control rate was 75%. The median survival time was 10.4 months, with 46% of patients alive at 1 year. These results suggest that re-challenge chemotherapy should be considered in selected patients with radiological partial response or a progression-free survival of longer than 6 months to the initial therapy.

Effect of Post-weld Heat-treatment on the Stress Corrosion Cracking Behaviour of Laser-welded Shape Memory NiTi Wires in Hanks’ Solution

In this study, the stress-corrosion cracking (SCC) behaviour of laser-welded NiTi wires before and after post-weld heat-treatment (PWHT) was investigated. The samples were subjected to slow strain rate testing (SSRT) under tensile loading in Hanks’ solution at 37.5 °C (or 310.5 K) at a constant anodic potential (200 mVSCE). The current density of the samples during the SSRT was captured by a potentiostat, and used as an indicator to determine the susceptibility to SCC. Fractography was analyzed using scanning-electron microscopy (SEM). The experimental results showed that the laser-welded sample after PWHT was immune to the SCC as evidenced by the stable current density throughout the SSRT. This is attributed to the precipitation of fine and coherent nano-sized Ni4Ti3 precipitates in the welded regions (weld zone, WZ and heat-affected zone, HAZ) after PWHT, resulting in (i) enrichment of TiO2 content in the passive film and (ii) higher resistance against the local plastic deformation in the welded regions.

Integrated Earth Resistivity Tomography (ERT) and Multilevel Gas Sampling: A Tool to Map Geogenic and Anthropogenic Methane Accumulation on Brownfield Sites

Soil gas emissions of methane and carbon dioxide on brownfield sites are usually attributed to anthropogenic activities; however geogenic sources of soil gas are often not considered during site investigation and risk management strategies. This paper presents a field study at a redeveloped brownfield site on a flood plain to identify accumulations of methane biogas trapped in underlying sediments. The investigation is based on a multidisciplinary approach using direct multi-level sampling measurements and Earth resistivity tomography . Resistivity imaging was applied to evaluate the feasibility of identifying the size and spatial continuity of soil gas accumulations in anthropogenic and naturally occurring deposits. As a result, biogas accumulations are described within both anthropogenic deposits and pristine organic sediments. This result is important to identify the correct approaches to identify and manage risks associated with soil gas emissions on brownfield and pristine sites. The organic-rich sediments in Quaternary fluvial environments of São Paulo Basin in particular the Tietê River, biogas reservoirs can be generated and trapped beneath geogenic and anthropogenic layers, potentially requiring the management of brownfield developments across this region.

Factors influencing European consumer uptake of personalised nutrition. Results of a qualitative analysis.

The aim of this research was to explore consumer perceptions of personalised nutrition and to compare these across three different levels of "medicalization": lifestyle assessment (no blood sampling); phenotypic assessment (blood sampling); genomic assessment (blood and buccal sampling). The protocol was developed from two pilot focus groups conducted in the UK. Two focus groups (one comprising only "older" individuals between 30 and 60 years old, the other of adults 18-65 yrs of age) were run in the UK, Spain, the Netherlands, Poland, Portugal, Ireland, Greece and Germany (N = 16). The analysis (guided using grounded theory) suggested that personalised nutrition was perceived in terms of benefit to health and fitness and that convenience was an important driver of uptake. Negative attitudes were associated with internet delivery but not with personalised nutrition per se. Barriers to uptake were linked to broader technological issues associated with data protection, trust in regulator and service providers. Services that required a fee were expected to be of better quality and more secure. An efficacious, transparent and trustworthy regulatory framework for personalised nutrition is required to alleviate consumer concern. In addition, developing trust in service providers is important if such services to be successful. (C) 2013 Elsevier Ltd. All rights reserved.

Low cycle fatigue properties of CLAM steel at 823 K

China Low Activation Martensitic (CLAM) steel is considered to be the main candidate material for the first wall components of future fusion reactors in China. In this paper, the low cycle fatigue (LCF) behavior of CLAM steel is studied under fully reversed tension–compression loading at 823 K in air. Total strain amplitude was controlled from 0.14% to 1.8% with a constant strain rate of 2.4×10−3 s−1. The corresponding plastic strain amplitude ranged from 0.023% to 1.613%. The CLAM steel displayed continuous softening to failure at 823 K. The relationship between strain, stress and fatigue life was obtained using the parameters obtained from fatigue tests. The LCF properties of CLAM steel at 823 K followed Coffin–Manson relationship. Furthermore, irregular serration was observed on the stress–strain hysteresis loops of CLAM steel tested with the total strain amplitude of 0.45–1.8%, which was attributed to the dynamic strain aging (DSA) effect. During continuous cyclic deformation, the microstructure and precipitate distribution of CLAM steel changed gradually. Many tempered martensitic laths were decomposed into subgrains, and the size and number of M23C6 carbide and MX carbonitride precipitates decreased with the increase of total strain amplitude. The response cyclic stress promoted the recovery of martensitic lath, while the thermal activation mainly played an important role on the growth of precipitates in CLAM steel at 823 K. In order to have a better understanding of high-temperature LCF behavior, the potential mechanisms controlling stress–strain response, DSA phenomenon and microstructure changes have also been evaluated.

The Impact of Extension and Ecosystem Services on Smallholders’ Credit Constraint.

On formal credit markets, access to formal credit and reasonable credit terms of smallholder farmers
in rural sub-Saharan Africa is limited due to adverse selection. Financial institutions operating in
rural areas often cannot distinguish between borrowers (farmers) that are creditworthy and those that
are not, thus, allocate limited resource to agriculture to reduce credit risk. In the presence of limited business quality signaling by smallholder farmers, financial institutions shall demand for collateral and/or offer unfavorable contract terms. Moreover, agricultural productivity of rural sub-Saharan
Africa, dominated by subsistence or small-scale farmers, is also negatively impacted by the adverse
effect of climate change. A strategy that may make the farming practices of smallholder farmer’s
climate resilient and profitable may also improve smallholder farmer's access to formal credit. This
study investigates to what extent participating in ecosystem and extension services (EES) programs
signals business quality of smallholders, thus granting them credit accessibility. We collected data
on 210 smallholder farmers in 2013, comprising farmers that receive payments for ecosystem
services (PES) and farm management training from the International Small Group Tree Planting
Program (TIST) Kenya to test the aforementioned theory empirically. We use game theory,
particularly a screening and sorting model, to illustrate the prospects for farmers with EES to access
formal credit and to improve their credit terms given that they receive PES and banking services
training. Furthermore, the PES’ long term duration (10 – 30 years) generates stable cash-flow which
may be perceived as collateral substitute. Results suggest that smallholder farmers in the TIST
program were less likely to be credit constraint compared to non-TIST farmers. Distance to market,
education, livestock and farm income are factors that determine access to credit from microfinance
institutions in rural Kenya. Amongst farmers that have obtained loans, those keeping business records
enjoy more favorable formal credit conditions. These farmers were observed to pay ca. 5 percent less
interest rate in microfinance charges. For TIST farmers, this type of farm management practices may
be attributed to the banking services and other training they receive within the program. While the
availability of classical collateral (farmlands) and PES may reduce interest rate, the latter was found
to be statistically insignificant. This research underlines the importance of an effective extension
services in rural areas of developing countries and the need to improve gains from conservation
agriculture and ensuing PES. The benefits associated with EES and PES may encompass agricultural
financing.

Effects of baited crab pots on cultivated mussel (Mytilus edulis) survival rates

The shore crab, Carcinus maenas, is recognized as a voracious predator of blue mussels, Mytilus edulis, having the potential to greatly reduce stocks in the benthic cultivation industry. As a consequence, baited crab pots are often deployed on and around cultivated benthic mussel beds to trap and remove crabs, in an attempt to reduce predatory pressure. Little is known about how C. maenas behaves around crab pots, but for many other crustacean fisheries, the trapping efficiency of pots is often low. Crabs may be attracted towards but not enter pots, instead feeding on cultivated mussels outside pots on the surrounding substratum. We tested whether the rate of loss of mussels attached to plates differed in areas next to baited pots compared with unbaited pots and to areas without any pots, at two sea loughs (60 km apart) in Northern Ireland. In Strangford Lough, more mussels were lost from plates next to baited pots than the other treatments. In Carlingford Lough, however, we found no difference in the number of mussels lost from plates in any treatment. This difference could be attributed to the different assemblages of mobile benthic predators at the two loughs. The presence of the starfish Asterias rubens, which was absent from experimental sites in Carlingford Lough, was thought to be responsible for increased predation rates near baited pots in Strangford. It is, therefore, important to consider local predator communities when deploying crab pots as a predator mitigation technique to ensure predation rates are in fact reduced and not enhanced. This study is of relevance not only to attempts to limit predation on commercial stocks of benthic cultivated mussels but also in situations where baited traps are deployed close to species vulnerable to mobile benthic predators.

A combined transient and computational study of the dissociation of N(2)O on platinum catalysts

The energetics of the low-temperature adsorption and decomposition of nitrous oxide, N(2)O, on flat and stepped platinum surfaces were calculated using density-functional theory (DFT). The results show that the preferred adsorption site for N(2)O is an atop site, bound upright via the terminal nitrogen. The molecule is only weakly chemisorbed to the platinum surface. The decomposition barriers on flat (I 11) surfaces and stepped (211) surfaces are similar. While the barrier for N(2)O dissociation is relatively small, the surface rapidly becomes poisoned by adsorbed oxygen. These findings are supported by experimental results of pulsed N(2)O decomposition with 5% Pt/SiO(2) and bismuth-modified Pt/C catalysts. At low temperature, decomposition occurs but self-poisoning by O((ads)) prevents further decomposition. At higher temperatures some desorption Of O(2) is observed, allowing continued catalytic activity. The study with bismuth-modified Pt/C catalysts showed that, although the activation barriers calculated for both terraces and steps were similar, the actual rate was different for the two surfaces. Steps were found experimentally to be more active than terraces and this is attributed to differences in the preexponential term. (C) 2004 Elsevier Inc. All rights reserved.

Characterisation of melt processed nanocomposites of Polyamide 6 subjected to uniaxial-drawing

In this paper, the processing and characterization of Polyamide 6 (PA6) nanocomposites containing graphite nanoplatelets (GNPs) is reported. PA6 nanocomposites were prepared by melt-mixing using an industrial, co-rotating, intermeshing, twin-screw extruder. A bespoke screw configuration was used that was designed in-house to enhance nanoparticle dispersion into a polymer matrix. The effects of nano-filler type (xGnPTM M-5 and xGnPTM C-500), nano-filler content, and extruder screw speed on the bulk properties of the PA6 nanocomposites were investigated. The crystalline structures of PA6 nanocomposites are related to thermal treatment, stress history and the presence of moisture and nanofillers. DSC, Raman and XRD studies show an increase in crystallinity with increasing GNP content and a phase transformation between α-form to γ-form crystals as a result of the heterophase nucleation effect. The effect of uniaxial stretching on PA6 nanocomposites was investigated by drawing specimens heated at temperatures below the melting temperature. DSC and Raman studies on the drawn samples show an increase in yield stress as the GNP content increases due to the strain induced crystallization and γ—β transition during stretching. The rheological response of the nanocomposites resemble that of a ‘pseudo-solid’, rather than a molten liquid, and analysis of the rheological data indicates that a percolation threshold was reached at GNP contents of between 10–15wt%. An increase in tensile modulus of as much as 412% was observed for PA6/C-500 xGnPTM composites, at a filler content of 20wt%. The enhancement of Young’s modulus and yield stress can be attributed to the reinforcing effect of GNPs and their uniform dispersion in the PA6 matrix. The electrical conductivity of the composite also increased with increasing GNP content, with an addition of 15wt% GNP resulting in a 6 order-of-magnitude increase in conductivity. The effects of uniaxial-drawing and the inclusion of multiple nano-filler varieties on the electrical and mechanical properties are currently under investigation.

Selective hydrogenation of fatty acids to alcohols over highly dispersed ReOx/TiO2 catalyst

Production of fatty alcohols through selective hydrogenation of fatty acids was studied over a 4% ReOx/TiO2 catalyst. Stearic acid was hydrogenated to octadecanol at temperatures and pressures between 180-200 degrees C and 2-4 MPa, with selectivity reaching 93%. A high yield of octadecanol was attributed to a strong adsorption of the acid compared to alcohol on the catalyst, which inhibits further alcohol transformation to alkanes. Low amounts (<7%) of alkanes (mainly octadecane) were formed during the conversion of stearic acid. However, it was found that the catalyst could be tuned for the production of alkanes. The reaction intermediates were octadecanal and stearyl stearate. Based on the reaction products analysis and catalyst characterization, a reaction mechanism and possible pathways were proposed.

Heterozygous ATM mutations do not contribute to early onset of breast cancer

Ataxia telangiectasia (AT) is a recessive syndrome, including cerebellar degeneration, immunologic defects and cancer predisposition, attributed to mutations in the recently isolated ATM (ataxia telangiectasia, mutated) gene. AT is diagnosed in 1/40,000 to 1/100,000 live births, with carriers calculated to comprise approximately 1% of the population. Studies of AT families have suggested that female relatives presumed to be carriers have a 5 to 8-fold increased risk for developing breast cancer, raising the possibility that germline ATM mutations may account for approximately 5% of all breast cancer cases. The increased risk for breast cancer reported for AT family members has been most evident among younger women, leading to an age-specific relative risk model predicting that 8% of breast cancer in women under age 40 arises in AT carriers, compared with 2% of cases between 40-59 years. To test this hypothesis, we undertook a germ-line mutational analysis of the ATM gene in a population of women with early onset of breast cancer, using a protein truncation (PTT) assay to detect chain-terminating mutations, which account for 90% of mutations identified in children with AT. We detected a heterozygous ATM mutation in 2/202 (1%) controls, consistent with the frequency of AT carriers predicted from epidemiologic studies. ATM mutations were present in only 2/401 (0.5%) women with early onset of breast cancer (P = 0.6). We conclude that heterozygous ATM mutations do not confer genetic predisposition to early onset of breast cancer.

Moving from Batch to Continuous Operation for the Liquid Phase Dehydrogenation of Tetrahydrocarbazole

Despite the numerous advantages of continuous processing, high-value chemical production is still dominated by batch techniques. In this paper, we investigate options for the continuous dehydrogenation of 1,2,3,4- tetrahydrocarbazole using a trickle bed reactor operating under realistic liquid velocities with and without the addition of a hydrogen acceptor. Here, a commercial 5 wt % Pd/Al₂O₃ catalyst was observed to slowly deactivate, hence proving unsuitable for continuous use. This deactivation was attributed to the strong adsorption of a byproduct on the surface of the support. Application of a base washing technique resolved this issue and a stable continuous reaction has been demonstrated. As was previously shown for the batch reaction, the addition of a hydrogen acceptor gas (propene) can increase the overall catalytic activity of the system.