Biomass production and chemical composition of Lippia alba (Mill.) NEBr. ex Britt & Wilson in leaves on different plant parts in different seasons

Lippia alba, family Verbenaceae, is widely spread in Central and South American. It's a shurb with a quadrangular branch reaching 1,7m tall. The leaves are membranaceous, petiolate, pubescent with a strong flavor. It's limbs have variable forms with pointed apex, cuneiform or decumbent base, and serrated or crenated hordes. It was determined the best harvest season to biomass production, essential oil content and chemical composition, on different plant parts (apical, medium, basal). It has been observed that, both apical and medium parts represented around 80 % of the fresh leaf mass. The foliar biomass yields are about 5 ton/ha in four harvests during an year. The average yield of essential oil considering the three plant parts were 0.15%, 0.47%, 0.46%, 0.55% and 0.61% for summer/98, autumn/98, winter/98, spring/98 and summer/99, respectively. Essential oils showed similar chemical composition either in relation to seasonality, neral, geranial and t-cariofilene were the majority compounds.

Microstructural, dielectric and ferroelectric properties of calcium-modified lead titanate thin films derived by chemical processes

Ferroelectric Pb1-xCaxTiO3 (x = 0.24) thin films were formed on a Pt/Ti/SiO2/Si substrate by the polymeric precursor method using the dip-coating technique for their deposition. Characterization of the films bq X-ray diffraction showed a perovskite single phase with a tetragonal structure after annealing at 700 degreesC. Atomic force microscopy (AFM) analyses showed that the film had a smooth and crack-free surface with low surface roughness. In addition, the PCT thin film had a granular structure with an 80 nm grain size. The thickness of the films observed by the scanning electron microscopy (SEM) is 550 nm and there is a good adhesion between the film and substrate. For the electrical measurements metal-ferroelectric-metal of the type capacitors were obtained, where the thin films showed good dielectric and ferroelectric properties. The dielectric constant and dissipation factor at 1 kHz and measured at room temperature were found to be 457 and 0.03. respectively. The remanent polarization and coercive field for the: deposited films were P-r = 17 muC/cm(2) and E-c = 75 kV/cm, respectively. Moreover. The 550-nm-thick film showed a current density in the order of 10(-8) A/cm(2) at the applied voltage of 2 V. The high values of the thin film's dielectric properties are attributed to its excellent microstructural quality and the chemical homogeneity obtained by the polymeric precursor method. (C) 2001 Elsevier science Ltd. All rights reserved.

High dielectric constant of SrTiO3 thin films prepared by chemical process

SrTiO3 thin films were prepared by the polymeric precursor method and deposited by spin-coating onto Pt/Ti/SiO2/Si(100) substrates. The spin-coated films heat treated at 700 degrees C were crack-free, dense, and homogeneous. Microstructural and morphological evaluations were followed by grazing incident X-ray, scanning electron microscopy and atomic force microscopy. Dielectric studies indicated a dielectric constant of about 475, which is higher than that of ceramic SrTiO3, and a factor dissipation of about 0.050 at 100 kHz. SrTiO3 thin films were found to have paraelectric properties with C-V characteristics. (C) 2000 Kluwer Academic Publishers.

Chemical vapor deposition of multi-walled carbon nanotubes from nickel/yttria-stabilized zirconia catalysts

Multi-walled carbon nanotubes (MWNT) were produced by chemical vapor deposition using yttria-stabilized zirconia/nickel (YSZ/Ni) catalysts. The catalysts were obtained by a liquid mixture technique that resulted in fine dispersed nanoparticles of NiO supported in the YSZ matrix. High quality MWNT having smooth walls, few defects, and low amounts of by-products such as amorphous carbon were obtained, even from catalysts with large Ni concentrations (> 50 wt.%). By adjusting the experimental parameters, such as flux of the carbon precursor (ethylene) and Ni concentration, both the MWNT morphology and the process yield could be controlled. The resulting YSZ/Ni/MWNT composites can be interesting due to their mixed ionic-electronic transport properties, which could be useful in electrochemical applications.

Influence of biosolids rate on chemical properties of an oxisol in São Paulo, Brazil

Organic residues may cause major health and environmental problems. This is the case in our study area, where more than 10 billion L per year of residential and industrial waste are produced. Land application of biosolids can be an economical solution by recycling waste and can provide valuable fertilizer if used correctly. The aim of this work was to study the effect of biosolids on the chemical properties of an Oxisol. The experiment was located at Ilha Solteira northwest of São Paulo State, Brazil. The soil was cropped to Sorghum bicolor.The field experimental design consisted of random blocks with six treatments and four replications of each treatment. Biosolids were surface applied to four treatments at rates of 5, 10, 20, and 40 Mg ha(-1) on a dry matter basis; in addition, a treatment with mineral fertilizer and a control were included. One year after biosolids application, soil samples were taken at 0-10, 10-20, and 20-40 cm. Organic matter content (Walkley-Black) and pH (CaCl2) were routinely determined. Cation exchange capacity, exchangeable bases (Ca, Mg, K), and P were determined by exchange resin extraction. No significant differences in any of the analyzed properties were found below the 20 cm depth. Extractable phosphorus (P) and potassium (K) increased with increasing biosolids rate in the top 20 cm, whereas calcium (Ca) and (Ma) magnesium content were not significantly influenced by biosolids. Soil pH decreased with increasing biosolids application. The sewage sludge application did not influence the sorghum production in the first year of culture, under unfavorable soil moisture conditions, but it influenced the dry matter.

Can the chemical composition of the whole body of a goat be estimated from parts of its body?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemical composition and tenderness of longissimus dorsi muscle from non- castrated Murrah buffaloes slaughtered at different weights

Buffalo meat production has been arising interest breeder and emerges as alternative to consumer, more and more demanding of the quality products. Thus, this research was conducted to study the chemical composition and tenderness of Longissimus dorsi muscle from 10 non-castrated Murrah buffaloes slaughtered at different weights. The research was carried in feedlot of School of Veterinary Medicine and Animal Science of the São Paulo State University, Botucatu, São Paulo, Brazil. Animals were divided in two groups, received diet ad libitum and slaughtered when reached 450 and 500 kg of live weight. The experiment design was completely randomized, with five repetitions to each treatment. Meat sample from Longissimus dorsi muscle, taken between 12(th) and 13(th) ribs, were carried analysis of moisture, crude protein, fat, ash, Longissimus muscle area (LMA), fat thickness (FT), marbling, calorie and tenderness. It did not have significant difference between the groups. Average values at of 76.0; 20.7; 2.1 and 1.2 of moisture, crude protein, fat and ash respectively, were obtained. Calorie, tenderness, LMA, FT and marbling were obtained at average values of 132 kca1/100g; 3.94 kgf; 34.2 cm(2); 5.9 mm and 2 points, respectively. Values obtained for tenderness are similar in the literature and has been proving that buffalo meat is tender (< 5kgf). Positive correlation was observed between the protein percentage and the shear force of the meat. The buffalo meat is excellent alternative source of red protein of high biological value to feeding of Brazilian consumers.

Insecticidal activity of chemical constituents from Aristolochia pubescens against Anticarsia gemmatalis larvae

Acetone and ethanol extracts of the tubercula and several compounds isolated from Aristolochia pubescens (Willd) were bioassayed on velvebean caterpillars, Anticarsia gemmatalis (Hubner), for evaluation of the insecticidal activities. of the extracts subjected to bioassay, the acetone extract showed the highest activity. (-)-Cubebin did not show activity against soybean caterpillars, whereas aristolochic acid and ent-kaur-15-en-17-ol increased the larval period. These compounds, and (+)-eudesmin and (+)-sesamin, reduced the viability of this period, giving rise to malformed adults. These extracts and compounds are therefore potential botanical insecticide agents for the control of velvetbean caterpillars in soybean crops. (C) 2003 Society of Chemical Industry.

Physico-chemical parameter correlations in the [RuCl2(CO)(L)(PPh3)2] complexes (L = N-heterocycles)

Fourteen complexes in the series [RuCl2(CO)(L)(PPh3)2] (where L = N-heterocycles) have been prepared and characterized by IR and NMR spectroscopies, and cyclic voltammetry. A good correlation is found between observed and calculated electrochemical potentials; E1/2 vs pKa or (Gp, σm for a series of similar ligands. It is now reported that the carbonyl stretching frequency, νCO, and the 13C and 31P NMR signals do not correlate well with any of the physico-chemical parameters used (E1/2, Taft's and Hammett's parameters). This behaviour is probably due to the characteristics of the Ru(II) species, which does not transmit the steric and electron donor/acceptor properties of the ligands to the carbonyl group, or because the measurements are not able to detect the effect induced by the changes in the ligand L. Indeed, good correlations are obtained when the measurements directly involve the metal centre, as is the case in the E1/2 measurements. Crystals of o[RuCl2(CO)(4-pic)(PPh3)2] are monoclinic, space group P21/n, a = 12.019(2), b = 13.825(3) and c = 22.253(3) . The structure was solved by the Patterson method and was refined by full-matrix least-squares procedure to R = 0.054 and Rw = 0.055, for 2114 reflections with I > 3σ(I). For L = 2-acetylpyridine and 2-methylimidazole, complexes with formulae [RuCl2(CO)(L)(PPh3)] · L and [RuCl2(CO)(L)2 (PPh3)], respectively, were obtained. © 1998 Elsevier Science Ltd. All rights reserved.

Early rooting in Rosemary's (Rosmarinus officinalis L.) cuttings under the influence of chemical treatments and collecting time

The present work aimed to verify the early rooting development and the root production in rosemary's (Rosmarinus officinalis L.) cuttings under the influence of treatments with sythetics auxins, boric acid and collecting time. The branches were collected at the end of the season and the stakes were prepared and placed into solutions containing NAA or IBA (25, 50, 75 and 100 pppm) without and with boric acid and then removed to a chamber of nebulization (all experimental work). In all the experimentes, the branches were collected after 30 days, the mean number of rooted cuttings was calculated, along with the mean number of roots per stakes and the dry weight of roots. The end of winter outstood as the best season for all analysed parameters.

Comparison between different conditions of the chemical polymerization of polyaniline on top of PET films

Composites produced during the in situ chemical polymerization of aniline on top of a poly(ethylene terephthalate) (PET) film, in different conditions, were studied by open-circuit potential (Voc), ultraviolet-visible, and infrared spectroscopy, electrical conductivity measurements, scanning electron microscopy, and atomic force microscopy. The polymerization monitoring by Voc showed a maximum associated with the intermediate pernigraniline oxidation state and a final formation of polyaniline (PANI) in the doped emeraldine salt (ES) form. Furthermore, high electrical conductivity values were obtained for the PANI-ES coating prepared under selected conditions. A globular formation was observed for the doped PANI-ES coating with globules of sizes of the same order and same shape of the PET, demonstrating the influence of the substrate on the coating morphology.

Physical and chemical characterization of dovyalis fruits

The objective of this work was to establish physical and chemical characterizations of dovyalis hybrid fruits (Dovyalis abyssinica and D. hebecarpa). Samples of 25 fruits were characterized by evaluation of length and width, weight, percentage and number of seeds per fruit, peel percentage, pulp percentage, total soluble solids (TSS), titratable acidity (TA), vitamin C and TSS/TA ratio. Dovyalis fruit has good physical quality for market with an average of 75% pulp. Vitamin C content averaged 120.3 mg/100 g of fresh fruit, characterizing dovyalis as a good source of vitamin C. © 2005 by The Haworth Press, Inc. All rights reserved.