Rapid design of biorthogonal wavelet transforms

A rapid design methodology for biorthogonal wavelet transform cores has been developed based on a generic, scaleable architecture for wavelet filters. The architecture offers efficient hardware utilisation by combining the linear phase property of biorthogonal filters with decimation in a MAC-based implementation. The design has been captured in VHDL and parameterised in terms of wavelet type, data word length and coefficient word length. The control circuit is embedded within the cores and allows them to be cascaded without any interface glue logic for any desired level of decomposition. The design time to produce silicon layout of a biorthogonal wavelet system is typically less than a day. The silicon cores produced are comparable in area and performance to hand-crafted designs, The designs are portable across a range of foundries and are also applicable to FPGA and PLD implementations.

Linear QR architecture for a single chip adaptive beamformer

This paper presents the design of a novel single chip adaptive beamformer capable of performing 50 Gflops, (Giga-floating-point operations/second). The core processor is a QR array implemented on a fully efficient linear systolic architecture, derived using a mapping that allows individual processors for boundary and internal cell operations. In addition, the paper highlights a number of rapid design techniques that have been used to realise this system. These include an architecture synthesis tool for quickly developing the circuit architecture and the utilisation of a library of parameterisable silicon intellectual property (IP) cores, to rapidly develop detailed silicon designs.

Sustainable bridge construction through innovative advances

Sustainability is now recognised as a key issue that must be addressed in the design, construction and lifelong maintenance of civil engineering structures. This paper briefly discusses the generic aspects of sustainability, but the main focus is its application to bridges. Motorway bridges built in the 1960s and 1970s had design lives of 120 years; many, however, were showing signs of deterioration after only 20–40 years. This led to much (ongoing) debate on the issue of initial versus full life-cycle costing. In order to address the highly complex issue of the sustainability of bridges, this paper considers the following specific areas that impinge on this important subject: the impact on sustainability of different forms of bridge construction and maintenance/repair/replacement strategies; the utilisation of innovative in situ testing equipment for assessing the long-term durability of concrete; the development of innovative structural designs for bridges that inherently have greatly extended lives at minimal, if any, additional cost.

Radiocarbon wiggle-match dating of proglacial lake sediments - Implications for the 8.2 ka event

The problem of insufficient age-control limits the utilisation of the 8.2 ka BP event for modelling freshwater forcing in climate change studies. High-resolution radiocarbon dates, magnetic susceptibility and lithostratigraphic evidence from a lake sediment core from Nedre Hervavatnet located at Sygnefjell in western Norway provide a record of the early Holocene. We use the method of radiocarbon wiggle-match dating of the lake sediments using the non-linear relationship between the C-14 calibration curve and the consecutive accumulation order of the sample series in order to build a high-resolution age-model. The timing and duration of Holocene environmental changes is estimated using 38 AMS radiocarbon dates on terrestrial macrofossils, insects and chironomids covering the time period from 9750 to 1180 cal BP. Chironomids, Salix and Betula leaves produce the most consistent results. Sedimentological and physical properties of the core suggest that three meltwater events with high sedimentation rates are superimposed on a long-term trend with glacier retreat between 9750 and 8000 cal BP. The lake sediment sequence of Nedre Hervavatnet demonstrates the following: only a reliable high-resolution geochronology based on carefully selected terrestrial macrofossils allows the reconstruction of a more refined and complex environmental change history before and during the 8.2 ka event. (C) 2009 Elsevier Ltd. All rights reserved.

The Impact of Admissions for the Management of End-stage renal disease on hospital bed occupancy

BACKGROUND:

End-stage renal disease (ESRD) is increasingly prevalent but the inpatient costs associated with this condition are poorly defined due to limitations with data extraction and failure to differentiate between hospitalisation for renal and non-renal disease reasons. The impact of admissions primarily for the management of ESRD on hospital bed utilisation was assessed over a 5-year period in a large teaching hospital.

METHODS:

All admission episodes were reviewed and the ESRD group was identified by a primary International Classification of Diseases code for ESRD or a non-specific primary renal failure code with a secondary code for ESRD. The frequency and duration of hospitalisation and contribution to bed day occupancy of this group with ESRD was determined.

RESULTS:

There were 70,808 patients responsible for a total of 116,915 admissions and 919,212 bed days over the study period. Of these, 988 (1.4%) patients were admitted for the management of ESRD, accounting for 2,387 (2.0%) of admissions and utilisation of 23,011 (2.5%) bed days. After adjustment for age and gender, those admitted for ESRD management were significantly more likely to have a prolonged admission exceeding 30 days (odds ratio 1.46, 95% confidence interval 1.23-1.72, p < 0.001). When the admission was an emergency rather than an elective event, the patient was 4.6 times more likely to be hospitalised for over 30 days.

CONCLUSIONS:

Persons admitted for ESRD management are hospitalised more frequently and for longer than the overall inpatient population, occupying a substantial number of bed days.

Evaluation of the Q-method as a method of public participation in the selection of sustainable development indicators

The complexity of sustainable development means that it is often difficult to evaluate and communicate the concept effectively. One standard method to reduce complexity and improve Communication, while maintaining scientific objectivity, is to use selected indicators. The aim of this paper is to describe and evaluate a process Of public participation in the selection of sustainable development indicators that utilised the Q-method for discourse analysis. The Q-method was Utilised to combine public opinion with technical expertise to create a list of technically robust indicators that would be relevant to the public, The method comprises statement collection, statement analysis, Q-sorts and Q-sort analysis. The results of the Q-method generated a list of statements for which a preliminary list of indicators was then developed by a team of experts from the fields of environmental science, sustainable development and Psychology. Subsequently members of the public evaluated the preliminary list of indicators, to select a final list of indicators that were both technically sound and incorporated the views of the public. The Utilisation of the Q-method in this process was evaluated using previously published criteria. The application of the Q-method in this context needs to be considered not only by the quality of the indicators developed, but also from the perspective of the benefit of the process to the participants. it was concluded that the Q-method provided an effective framework for public participation in the selection of indicators as it allowed the public to discuss Sustainable development in familiar language and in the context of their daily lives. By combining this information with expert input, a list of technically robust indicators that resonate with the public was developed. The results demonstrated that many citizens are not aware Of Sustainable development, and if it is to be successfully communicated to them, then indicators and policy need to be couched in terms familiar and relevant to citizen and communities. (C) 2009 Elsevier Ltd. All rights reserved.

Through-thickness control of polymer bioresorption via electron beam irradiation

Predicable and controlled degradation is not only central to the accurate delivery of bioactive agents and drugs, it also plays a vital role in key aspects of bone tissue engineering. The work addressed in this paper investigates the utilisation of e-beam irradiation in order to achieve a controlled (surface) degradation profile. This study focuses on the modification of commercially and clinically relevant materials, namely poly(L-lactic acid) (PLLA), poly(L-lactide-hydroxyapatite) (PLLA-HA), poly(L-lactide-glycolide) co-polymer (PLG) and poly(L-lactide-DL-lactide) co-polymer (PLDL). Samples were subjected to irradiation treatments using a 0.5 MeV electron beam with delivered surface doses of 150 and 500 kGy. In addition, an acrylic attenuation shield was used for selected samples to control the penetration of the e-beam. E-beam irradiation induced chain scission in all polymers, as characterized by reduced molecular weights and glass transition temperatures (T-g). Irradiation not only produced changes in the physical properties of the polymers but also had associated effects on surface erosion of the materials during hydrolytic degradation. Moreover, the extent to which both mechanical and hydrolytic degradation was observed is synonymous with the estimated penetration of the beam (as controlled by the employment of an attenuation shield). (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Refractory asthma in the UK: cross-sectional findings from a UK multicentre registry

Introduction: Refractory asthma represents a significant unmet clinical need where the evidence base for the assessment and therapeutic management is limited. The British Thoracic Society (BTS) Difficult Asthma Network has established an online National Registry to standardise specialist UK difficult asthma services and to facilitate research into the assessment and clinical management of difficult asthma.
Methods: Data from 382 well characterised patients, who fulfilled the American Thoracic Society definition for refractory asthma attending four specialist UK centres—Royal Brompton Hospital, London, Glenfield Hospital, Leicester, University Hospital of South Manchester and Belfast City Hospital—were used to compare patient demographics, disease characteristics and healthcare utilisation.
Results: Many demographic variables including gender, ethnicity and smoking prevalence were similar in UK centres and consistent with other published cohorts of refractory asthma. However, multiple demographic factors such as employment, family history, atopy prevalence, lung function, rates of hospital admission/unscheduled healthcare visits and medication usage were different from published data and significantly different between UK centres. General linear modelling with unscheduled healthcare visits, rescue oral steroids and hospital admissions as dependent variables all identified a significant association with clinical centre; different associations were identified when centre was not included as a factor.
Conclusion: Whilst there are similarities in UK patients with refractory asthma consistent with other comparable published cohorts, there are also differences, which may reflect different patient populations. These differences in important population characteristics were also identified within different UK specialist centres. Pooling multicentre data on subjects with refractory asthma may miss important differences and potentially confound attempts to phenotype this population.

Diving behaviour during the internesting interval for loggerhead turtles Caretta caretta nesting in Cyprus

Time depth recorders were used to assess the patterns of depth utilisation by 2 loggerhead turtles Caretta caretta in Cyprus, eastern Mediterranean. Dives to the seabed accounted for 59 % (171 h) and 75 % (215 h) of the internesting interval, respectively, with most dives being shallow (

Des droits civils au carnaval : anthropologie de l’espace public à Belfast

This paper explores one of the defining aspects of politics and identity in Northern Ireland : the control and utilisation of public space, particularly urban public space. I will examine evidence of some changes in the way public space is being used in central Belfast that potentially reflects changing identities in the city. The paper concludes by speculating on whether a new civic identity that spans the political and ethnic divisions has started to develop in Belfast and that this might evolve even with increased residential division throughout the Belfast urban area.

Effects of seawater-neutralised bauxite refinery residue on properties of concrete

Various industrial by-products, such as fly ash, ground granulated blast-furnace slag and silica fume, have been used in concrete to improve its properties. This also enables any environmental issues associated with their disposal. Another material that is available in large quantities and requiring alternative methods of disposal is the Bauxite Refinery Reside (BRR) from the Bayer process used to extract alumina from bauxite. As this is highly caustic and causes many health hazards, Virotec International Ltd. developed a patented technology to convert this into a material that can be used commercially, known as Bauxsol™, for various environmental remediation applications. This use is limited to small quantities of seawater-neutralised BRR and hence an investigation was carried out to establish its potential utilisation as a sand replacement material in concrete. In addition to fresh properties of concrete containing seawater-neutralised BRR up to 20% by mass of Portland cement, mechanical and durability properties were determined. These properties indicated that seawater-neutralised BRR can be used to replace natural sand up to 10% by mass of cement to improve the durability properties of concrete without detrimentally affecting their physical properties. Combining these beneficial effects with environmental remediation applications, it can be concluded that there are specific applications where concretes containing seawater-neutralised BRR could be used.

TRARESA: a tissue microarray-based hospital system for biomarker validation and discovery

Formalin fixed and paraffin embedded tissue (FFPE) collections in pathology departments are the largest resource for retrospective biomedical research studies. Based on the literature analysis of FFPE related research, as well as our own technical validation, we present the Translational Research Arrays (TRARESA), a tissue microarray centred, hospital based, translational research conceptual framework for both validation and/or discovery of novel biomarkers. TRARESA incorporates the analysis of protein, DNA and RNA in the same samples, correlating with clinical and pathological parameters from each case, and allowing (a) the confirmation of new biomarkers, disease hypotheses and drug targets, and (b) the postulation of novel hypotheses on disease mechanisms and drug targets based on known biomarkers. While presenting TRARESA, we illustrate the use of such a comprehensive approach. The conceptualisation of the role of FFPE-based studies in translational research allows the utilisation of this commodity, and adds to the hypothesis-generating armamentarium of existing high-throughput technologies.

Electron-beam treatment of poly(lactic acid) to control degradation profiles

Bioresorbable polymers such as polylactide (PIA) and polylactide-co-glycolide (PLGA) have been used successfully as biomaterials in a wide range of medical applications. However, their slow degradation rates and propensity to lose strength before mass have caused problems. A central challenge for the development of these materials is the assurance of consistent and predictable in vivo degradation. Previous work has illustrated the potential to influence polymer degradation using electron beam (e-beam) radiation. The work addressed in this paper investigates further the utilisation of e-beam radiation in order to achieve a more surface specific effect. Variation of e-beam energy was studied as a means to control the effective penetrative depth in poly-L-lactide (PLEA). PLEA samples were exposed to e-beam radiation at individual energies of 0.5 MeV, 0.75 MeV and 1.5 MeV. The near-surface region of the PLEA samples was shown to be affected by e-beam irradiation with induced changes in molecular weight, morphology, flexural strength and degradation profile. Moreover, the depth to which the physical properties of the polymer were affected is dependent on the beam energy used. Computer modelling of the transmission of each e-beam energy level used corresponded well with these findings. (C) 2010 Elsevier Ltd. All rights reserved.

Patterns of hospitalisation before and following initiation of haemodialysis: a 5 year single centre study

Background: The utilisation of healthcare resources by prevalent haemodialysis patients has been robustly evaluated with regard to the provision of outpatient haemodialysis; however, the impact of hospitalisation among such patients is poorly defined. Minimal information is available in the UK to estimate the health and economic burden associated with the inpatient management of prevalent haemodialysis patients. The aim of this study was to assess the pattern of hospitalisation among a cohort of haemodialysis patients, before and following their initiation of haemodialysis. In addition the study sought to assess the impact of their admissions on bed occupancy in a large tertiary referral hospital in a single region in the UK.

Methods: All admission episodes were reviewed and those receiving dialysis with the Belfast City Hospital Programme were identified over a 5 year period from January 2001 to December 2005. This tertiary referral centre provides dialysis services for a population of approximately 700?000 and additional specialist renal services for the remainder of Northern Ireland. The frequency and duration of hospitalisation, and contribution to bed day occupancy of haemodialysis patients, was determined and compared to other common conditions which are known to be associated with high bed occupancy. In addition, the pattern and timing of admissions in dialysis patients in relation to their dialysis initiation date was assessed.

Results: Over the 5 year study period, 798 haemodialysis patients were admitted a total of 2882 times. These accounted for 2.5% of all admissions episodes; the median number of admissions for these patients was 3 (2–5) which compared with 1 (1–2) for non-dialysis patients. The majority of first hospitalisations (54%) were within 100 days before or after commencement of maintenance dialysis therapy. In all clinical specialties the median length of stay for haemodialysis patients was significantly longer than for patients not on haemodialysis (p=0.004). In multivariate analysis with adjustment for age, gender, and other clinically relevant diagnostic codes, maintenance haemodialysis patients stayed on average 3.75 times longer than other patient groups (ratio of geometric means 3.75, IQR 3.46–4.06).

Conclusions: Maintenance haemodialysis therapy is an important risk factor for prolonged hospitalisation regardless of the primary reason for admission. Such patients require admission more frequently than the general hospital population, particularly within 100 days before and after initiation of their first dialysis treatment.

Threshold effects in the Teaching Space Allocation Problem with Splitting

Universities aim for good “Space Management” so as to use the teaching space efficiently. Part of this task is to assign rooms and time-slots to teaching activities with limited numbers and capacities of lecture theaters, seminar rooms, etc. It is also common that some teaching activities require splitting into multiple events. For example, lectures can be too large to fit in one room or good teaching practice requires that seminars/tutorials are taught in small groups. Then, space management involves decisions on splitting as well as the assignments to rooms and time-slots. These decisions must be made whilst satisfying the pedagogic requirements of the institution and constraints on space resources. The efficiency of such management can be measured by the “utilisation”: the percentage of available seat-hours actually used. In many institutions, the observed utilisation is unacceptably low, and this provides our underlying motivation: to study the factors that affect teaching space utilisation, with the goal of improving it. We give a brief introduction to our work in this area, and then introduce a specific model for splitting. We present experimental results that show threshold phenomena and associated easy-hard-easy patterns of computational difficulty. We discuss why such behaviour is of importance for space management.