Preliminary X-ray crystallographic studies of a tetrameric phospholipase A(2) formed by two isoforms of crotoxin B from Crotalus durissus terrificus venom

Crotoxin B is a basic phospholipase A(2) found in the venom of Crotalus durissus terrificus and is one of the subunits that constitute crotoxin. This heterodimeric toxin, which is the main component of C. d. terrificus venom, is completed by an acidic, nontoxic and non-enzymatic component (crotoxin A) and is involved in important envenomation effects, such as neurological disorders, myotoxicity and renal failure. Although crotoxin was first crystallized in 1938, no crystal structure is currently available for crotoxin, crotoxin A or crotoxin B. In this work, the crystallization, X-ray diffraction data collection to 2.28 angstrom resolution and molecular-replacement solution of a novel tetrameric complex formed by two dimers of crotoxin B isoforms (CB1 and CB2) is presented.

(1-x)PMN-xPT ceramics prepared by conventional and modified columbite route: Effect on electrical properties

This study aims to demonstrate how the chemical homogeneity of B cations affects the microstructure and electrical responses of (1-x) PMN-xPT ceramics. Two methodologies were employed to synthesize three different compositions, with x assuming the values 0.10, 0.28, and 0.35. If compared to conventional method, the Ti-modified columbite route, which is characterized by higher B cation homogeneity, leads to PMN-PT powders and ceramics with lower content of PNT pyrochlore phase and, for 0.65PMN-0.35PT composition, minor amount of tetragonal phase is found. Conclusively, PMN-PT ceramics obtained by modified route favors B cations homogeneity, enhancing the dielectric, ferroelectric and piezoelectric properties.

Correlation of temperature induced conformation change with optimum catalytic activity in the recombinant G/11 xylanase A from Bacillus subtilis strain 168 (1A1)

The 1.7 angstrom resolution crystal structure of recombinant family G/11 beta-1,4-xylanase (rXynA) from Bacillus subtilis 1A1 shows a jellyroll fold in which two curved P-sheets form the active-site and substrate-binding cleft. The onset of thermal denaturation of rXynA occurs at 328 K, in excellent agreement with the optimum catalytic temperature. Molecular dynamics simulations at temperatures of 298-328 K demonstrate that below the optimum temperature the thumb loop and palm domain adopt a closed conformation. However, at 328 K these two domains separate facilitating substrate access to the active-site pocket, thereby accounting for the optimum catalytic temperature of the rXynA. (c) 2005 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

Relationship between oxidative stress, glutathione S-transferase polymorphisms and hydroxyurea treatment in sickle cell anemia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

QCD effective charge and the structure function F-2 at small-x

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Crystal structure of propylthiouracil determined using high-resolution synchrotron X-ray powder diffraction

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade e composição química da carne de bovinos de corte inteiros ou castrados de diferentes grupos genéticos Charolês x Nelore

Seventy beef males of three breeding systems (BS), straightbreds Charolais (Ch) and Nellore (Ne), G1 crossbreds: 1/2 Ch + 1/2 Ne (1/2 Ch) and 1/2 Ne + 1/2 Ch (1/2 Ne) and G2 crossbreds: 3/4 Ch + 1/4 Ne (3/4 Ch) and 3/4 Ne + 1/4 Ch (3/4 Ne) were used. The number of animals by genetic group was, respectively, 15, 12,8, 12,14 and 9. Thirty-five males were castrated (C) at seven months and 35 were kept intact (1). The animals were feedlot finished from 20 to 24 months. The longissimus dorsi muscle was used for the meat evaluation. No significant interaction was observed between genetic composition and sexual condition, for the variables studied. The I males displayed meat with darker color (3.05 vs. 3.78 points) with less amount of marbling (4.26 vs. 5.75 points) and less amount of ether extract (1.73 vs. 2.88%). However they presented larger (66.03 vs. 60.50 cm(2)) longissimus dorsi area and meat with better palatability, juiciness and tenderness. Ch animals had larger longissimus dorsi than the Ne. In the G I group, the 1/2 Ch meat showed larger amount of marbling and ether extract and less cooking losses than the 1/2 Ne meat. Between G2 animals, the 3/4 Ne showed meat with larger thawing losses and larger amount of ether extract. In G1 animals meat, the heterosis level reached 18.54% for longissimus dorsiarea, 28.10% for ether extract and 64.01% for amount of marbling. In G2, the heterosis was -17.30% for lean texture and 10.40% for longissimus dorsi area.

INFLUENCE OF DIETARY-PROTEIN INTAKE AND RECOMBINANT HUMAN SOMATOTROPIN ADMINISTRATION ON GROWTH AND BODY-COMPOSITION OF JUVENILE TAMBACU (A PIARACTUS-MESOPOTAMICUS X COLOSSOMA-MACROPOMUM CROSS)

This experiment was undertaken to study the interaction between level of dietary protein and recombinant human somatotropin (rhGH) administration on performance and body composition of juvenile tambacu (a crossbred Brazilian fish). A total of 72 juvenile tambacu, initially weighing and measuring (mean +/- s.e.m.) 23 +/- 2 g and 9 +/- 0.5 cm, respectively, were randomly divided into 18 groups of 4 fish each. Water temperature was 28 degrees C. Triplicate groups received one of two levels of dietary protein (15 and 30% as fed basis) and one of 3 doses of rhGH (0, 2 and 4 mu g/g) via intraperitoneal injection twice a week for 6 weeks, using a randomized complete block design. Somatotropin was noted to stimulate linear and body weight gain. The higher protein level supported increased growth in weight and length, but there was no interaction between protein level and rhGH dose for either parameter. Protein efficiency ratio and percentage protein deposited showed higher values on diets containing 15% protein. Somatotropin treatment did not significantly affect body composition, but there was a trend towards improved protein retention and reduced carcass lipid. In conclusion, the results of this experiment suggest that rhGH is able to stimulate linear gain in tambacu.

Efeito da ovariectomia em novilhas Nelore x Angus, Bos taurus indicus x Bos taurus taurus sobre os ganhos de peso

This study aimed to evaluate the weight gain in cross breed heifers Nelore X Angus, spayed and nonspayed, kept on pasture and confinement. The animals were allotted in two groups as follows: group I consisted of 30 nonspayed heifers with 18 months old. Group 2 was composed of 30 spayed heifers with 18 months old. The animals were allotted in pasture of Brachiaria decumbens and weighted at 39 and 75 days. Significant difference was observed between the average daily gain of the two groups - G1 and G2 (75(th) day), respectively (0.51 kg and 0.65 kg; P<0.0 1). The following day (761 day), all animals were allotted and kept on confinement during 144 days. Significant difference was observed between the average daily gain of the two groups - G I and G2 (1441 day), respectively (0.73 kg and 0.58 kg; P<0.0 1). The results of this experiment show that spayed heifers presented a higher daily gain on pasture.

Spectroscopic investigation and thermal behavior of new carbonyl complexes [M(CO)(4)(N-N)(CuX)], (M = W, Mo; N-N=2,2 '-bipyridine, 1,10-phenanthroline; X = Cl, SCN)

M(CO)(4)(N-N)] reacts with CuCl to give new heterobimetallic metal carbonyls of the type [M(CO)(4)(N-N)(CuCl)], M = W, Mo; N-N = 2,2'-bipyridine (bipy), 1,10-phenanthroline (phen). Reactions of [M(CO)(4)(N-N)(CuCl)] with NaSCN produced the series of complexes of general formula [M(CO)(4)(N-N)(CuSCN)]. The i.r. spectral of all the bimetallic carbonyls exhibited the general four m ( CO) band patterns of the precursors. The u.v.-vis. spectral data for precursors and products showed bands associated with pi --> pi* (nitrogen ligands), d-->d (intrametal), as well as MLCT d-->pi* (nitrogen ligands) and MLCT d --> pi*(CO) transitions. The [M(CO)(4)(N-N)(CuX)] (X = Cl, SCN) emission spectra showed only one band associated with the MLCT transition. The t.g. curves revealed a stepwise loss of CO groups. The initial decomposition temperatures of the [M(CO)(4)(N-N)(CuX)] series suggest that the bimetallic compounds are indeed thermally less stable than their precursors, and the X- ray data showed the formation of MO3, CuMO4, Cu2O and CuO as final decomposition products, M = W, Mo. The spectroscopic data suggests that the heterobimetallic compounds are polymeric.

Economic design of two-stage (X)over-bar charts: the Markov chain approach

When the (X) over bar chart is in use, samples are regularly taken from the process, and their means are plotted on the chart. In some cases, it is too expensive to obtain the X values, but not the values of a correlated variable Y. This paper presents a model for the economic design of a two-stage control chart, that is. a control chart based on both performance (X) and surrogate (Y) variables. The process is monitored by the surrogate variable until it signals an out-of-control behavior, and then a switch is made to the (X) over bar chart. The (X) over bar chart is built with central, warning. and action regions. If an X sample mean falls in the central region, the process surveillance returns to the (Y) over bar chart. Otherwise. The process remains under the (X) over bar chart's surveillance until an (X) over bar sample mean falls outside the control limits. The search for an assignable cause is undertaken when the performance variable signals an out-of-control behavior. In this way, the two variables, are used in an alternating fashion. The assumption of an exponential distribution to describe the length of time the process remains in control allows the application of the Markov chain approach for developing the cost function. A study is performed to examine the economic advantages of using performance and surrogate variables. (C) 2003 Elsevier B.V. All rights reserved.

Combined TUNEL and TRAP methods suggest that apoptotic bone cells are inside vacuoles of alveolar bone osteoclasts in young rats

Although it is generally accepted that osteoclasts breakdown and resorb bone matrix, the possibility that they may also be able to engulf apoptotic osteoblasts/ lining cells and/or osteocytes remains controversial. Apoptosis of osteoblasts/ lining cells and/or osteocytes and interactions between these cells and osteoclasts are extremely rapid events that are difficult to observe in viva. A suitable in viva model for studying these events is the alveolar bone of young rats because it is continuously. Thus, sections of aldehyde fixed alveolar undergoing intense resorption/remodeling bone of young rats were stained by the combined terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) method and the tartrate-resistant acid phosphatase (TRAP) method for the simultaneous visualization of apoptotic cells and osteoclasts in the same section. The combined TUNEL and TRAP reactions, in the same section, greatly facilitated visualization of relationship between osteoclasts and apoptotic bone cells during alveolar bone remodeling. Our results showed that several TRAP-positive osteoclasts exhibited large vacuoles containing TUNEL positive apoptotic structures, probably derived from osteoblasts/lining cells and/or osteocytes. These results support the idea that alveolar bone osteoclasts are able to internalize dying apoptotic bone cells.

VSSI (X)over-bar charts with sampling at fixed times

A standard (X) over bar chart for controlling the process mean takes samples of size no at specified, equally-spaced, fixed-time points. This article proposes a modification of the standard (X) over bar chart that allows one to take additional samples, bigger than no, between these fixed times. The additional samples are taken from the process when there is evidence that the process mean moved from target. Following the notation proposed by Reynolds (1996a) and Costs (1997) we shortly call the proposed (X) over bar chart as VSSIFT (X) over bar chart: where VSSIFT means variable sample size and sampling intervals with fixed times. The (X) over bar chart with the VSSIFT feature is easier to be administered than a standard VSSI (X) over bar chart that is not constrained to sample at the specified fixed times. The performances of the charts in detecting process mean shifts are comparable.

Electronic structure of Pb1-xLaxTiO3 ferroelectric materials from Ti 2p and O 1s soft x-ray absorption spectroscopy

The electronic structure of Pb1-xLaxTiO3 (PLT) compounds for x ranging from 0 to 30 at. % of La is investigated by means of soft x-ray absorption near edge structure (XANES) at the Ti L-3,L-2 and O K edges. The greatest modification in the structure of the Ti 2p XANES spectra of the PLT compounds is observed in the region of the high energy peak of the L-3 edge (e(g) states), which exhibits a splitting in the undoped sample. As the amount of lanthanum increases, this splitting becomes less pronounced. This modification is interpreted as a decrease in the degree of disorder of titanium atoms, which is correlated to the substitution of Pb by La atoms. The structural changes observed at the low energy peaks of the O K-edge XANES spectra of the PLT compounds may be interpreted in terms of hybridization between O 2p, Ti 3d, and Pb 6p orbitals. A decrease in the degree of hybridization observed as Pb atoms are replaced by La atoms may be related to the differences in the ferroelectric properties observed between x=0.0 and x=0.30 compounds. (c) 2006 American Institute of Physics.

Effects of processing on the structure of zein/oleic acid films investigated by X-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 angstrom, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5.angstrom d-spacing remained stable under processing while the 10 angstrom d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 angstrom) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods.