Conservation Reserve Program to Row Crop Demonstration

The demonstration project was designed to examine one way of preparing Conservation Reserve Program (CRP) land for row crop production. Many producers have successfully converted CRP land for this purpose; additionally, there was an opportunity for the research farm to gain experience in this area. The goal of the project was to document one way of going through the process.

Tab. 2: Gravity measurements of the Inntal underground at Thaur

A cross-section of the Inn-valley has been surveyed by refraction- and refiection-seismic and gravimetrie methods. The thickness of the Inn-va.!ley sediments is 340- 390 m. At the northern edge of the valley an intermediate layer between sediments and basement has been detected, which is up to 300 ITl thick. This zone seems to mark the boundary of the northern calcareous alps.

137Cs and 90Sr depositions, and 137Cs/90Sr ratios of samples from the Kraton-3 underground nuclear explosion site, Russia

Strontium-90 activity concentrations in surface soils and areal deposition densities have been studied at a site contaminated by an accidental release to atmosphere from the underground nuclear explosion 'Kraton-3' conducted near the Polar Circle (65.9°N, 112.3°E) within the territory of the former USSR in 1978. In 2001-2002, the ground surface contamination at 14 plots studied ranged from 20 to 15000 kBq/m**2, which significantly exceeds the value of 0.44 kBq/m**2 deduced for three background plots. The zone with substantial radiostrontium contamination extends, at least, 2.5 km in a north-easterly direction from the borehole. The average 137Cs/90Sr ratio in the ground contamination originated from the 'Kraton-3' fallout was estimated to be 0.55, which is significantly different from the ratio of 2.05 evaluated for background plots contaminated mostly from global fallout. Although vertical migration of 90Sr in all undisturbed soil profiles studied is more rapid than that for 137Cs, the depth of percolation of both radionuclides into the ground is mostly limited to the top 10-20 cm, which may be explained, primarily, by permafrost conditions. The horizontal migration rate of radiostrontium in the aqueous phase exceeds the radiocaesium migration rate by many times. This phenomenon seems to be a reason for the significant enrichment of the soil surface layers by radiostrontium at some sites, with variations occurring in accordance with small-scale irregularities of landscape.

(Table 1) Isotopic and geochemical parameters of gas phase from underground fluids of the Baikal rift and its framing

Results of studying isotopic composition of helium in underground fluids of the Baikal-Mongolian region during the last quarter of XX century are summarized. Determinations of 3He/4He ratio in 139 samples of gas phase from fluids, collected at 104 points of the Baikal rift zone and adjacent structures are given. 3He/4He values lie within the range from 1x10**-8 (typical for crustal radiogenic helium) to 1.1x10**-5 (close to typical MORB reservoir). Repeated sampling in some points during more than 20 years showed stability of helium isotopic composition in time in each of them at any level of 3He/4He values. There is no systematic differences of 3He/4He in samples from surface water sources and deeper intervals of boreholes in the same areas. Universal relationship between isotopic composition of helium and general composition of gas phase is absent either, but the minimum 3He/4He values occurred in methane gas of hydrocarbon deposits, whereas in nitrogen and carbon dioxide gases of helium composition varied (in the latter maximum 3He/4He values have been measured). According to N2/Ar_atm ratio nitrogen gases are atmospheric. In carbonic gas fN2/fNe ratio indicates presence of excessive (non-atmogenic) nitrogen, but the attitude CO2/3He differs from one in MORB. Comparison of helium isotopic composition with its concentration and composition of the main components of gas phase from fluids shows that it is formed under influence of fractionation of components with different solubility in the gas-water system and generation/consumption of reactive gases in the crust. Structural and tectonic elements of the region differ from the spectrum of 3He/4He values. At the pre-Riphean Siberian Platform the mean 3He/4He = (3.6+/-0.9)x10**- 8 is very close to radiogenic one. In the Paleozoic crust of Khangay 3He/4He = (16.3+/-4.6)x10**-8, and the most probable estimate is (12.3+/-2.9)x10**-8. In structures of the eastern flank of the Baikal rift zone (Khentei, Dauria) affected by the Mz-Kz activization 3He/4He values range from 4.4x10**-8 to 2.14x10**-6 (average 0.94x10**-6). Distribution of 3He/4He values across the strike of the Baikal rift zone indicates advective heat transfer from the mantle not only in the rift zone, but also much further to the east. In fluids of the Baikal rift zone range of 3He/4He values is the widest: from 4x10**-8 to 1.1x10**-5. Their variations along the strike of the rift zone are clearly patterned, namely, decrease of 3He/4He values in both directions from the Tunka depression. Accompanied by decrease in density of conductive heat flow and in size of rift basins, this trend indicates decrease in intensity of advective heat transfer from the mantle to peripheral segments of the rift zone. Comparing this trend with data on other continental rift zones and mid-ocean ridges leads to the conclusion about fundamental differences in mechanisms of interaction between the crust and the mantle in these environments.

Bones collection of Lena Delta reserve Tiksi, Appendix 4-6

Remains of large Pleistocene mammals always attract attention. Scientists and local people who work and live in the Laptev Sea Region find and collect various bones and fragments of large mammals. Some of them are brought to the Lena Delta Reserve. Mammal remains of the "Mammoth fauna" are the most common artifacts in the paleontological collection of the Lena Delta Reserve museum. The collection includes single bones, fragments of skeletons, bones with soft tissues and hair of Late Pleistocene and Holocene specimens. It consists of nearly 300 samples. The museum was created thanks to the enthusiasm of Dr. A. Gukov, the present director of the reserve. Employees of the reserve, school teachers, pupils and other interested people also contribute. The first specimens were collected in 1985. They were bison bones collected by Yarlykov Yu. A. on Makar Island (Yana Delta Region) near the Makar polar station; Efimov S. N. found horse and reindeer bones on the Myostakh Cape, Bykovsky Peninsula (Lena Delta Region). Mammoth and reindeer bones were collected by Gukov A. Yu. during the same year on Kurungnakh-Sise Island. Over more than 20 years many people have presented their finds to the reserve. These are samples from different islands of the Lena Delta Region, from the New Siberian Islands, from the Yana Delta Region, and from the southern coasts of the Laptev and East Siberian Seas. Most of the collection consists of bones from the Bykovsky Peninsula (about 100 samples) as well as from the islands of the Lena Delta Region. Unfortunately not all samples have exact information about their origins or is geological information available for all finds. It is typical for this exhibition that the finds were collected by amateurs (not during geological or paleontological expeditions). A considerable portion of the collection consists of finds of Dr. A. Gukov from different locations within the Lena Delta Reserve. In 2001 Dr. A. Sher delivered about 40 samples from the Bykovsky Peninsula (Mamontovy Khayata) to the museum.

Fulminant hepatic and multiple organ failure following acute viral tonsillitis: a case report.

BACKGROUND Pyogenic tonsillitis may often be observed in the general Western population. In severe cases, it may require antibiotic treatment or even hospitalization and often a prompt clinical response will be noted. Here we present an unusual case of progressive multiple organ failure including fulminant liver failure following acute tonsillitis initially mistaken for "classic" pyogenic (that is bacterial) tonsillitis. CASE PRESENTATION A 68-year-old previously healthy white man was referred with suspicion of pyogenic angina. After tonsillectomy, he developed acute liver failure and consecutive multiple organ failure including acute hemodynamic, pulmonary and dialysis-dependent renal failure. Immunohistopathological analysis of his tonsils and liver as well as serum polymerase chain reaction analyses revealed herpes simplex virus-2 to be the causative pathogen. Treatment included high-dose acyclovir and multiorgan supportive intensive care therapy. His final outcome was favorable. CONCLUSIONS Fulminant herpes simplex virus-2-induced multiple organ failure is rarely observed in the Western hemisphere and should be considered a potential diagnosis in patients with tonsillitis and multiple organ failure including acute liver failure. From a clinical perspective, it seems important to note that fulminant herpes simplex virus-2 infection may masquerade as "routine" bacterial severe sepsis/septic shock. This persevering condition should be diagnosed early and treated goal-oriented in order to gain control of this life-threatening condition.

Safety assessment of underground vehicles passing over highly resilient straight tracks in the presence of a broken rail

In this paper, vehicle-track interaction for a new slab track design, conceived to reduce noise and vibration levels has been analyzed, assessing the derailment risk for trains running on curved track when encountering a broken rail. Two different types of rail fastening systems with different elasticities have been analysed and compared. Numerical methods were used in order to simulate the dynamic behaviour of the train-track interaction. Multibody system (MBS) modelling techniques were combined with techniques based on the finite element method (FEM). MBS modelling was used for modelling the vehicle and FEM for simulating the elastic track. The simulation model was validated by comparing simulated results to experimental data obtained in field testing. During the simulations various safety indices, characteristic of derailment risk, were analysed. The simulations realised at the maximum running velocity of 110 km/h showed a similar behaviour for several track types. When reducing the running speed, the safety indices worsened for both cases. Although the worst behaviour was observed for the track with a greater elasticity, in none of the simulations did a derailment occur when running over the broken rail.

Safety assessment of underground vehicles passing over highly resilient curved tracks in the presence of a broken rail

Vehicle–track interaction for a new resilient slab track designed to reduce noise and vibration levels was analysed, in order to assess the derailment risk on a curved track when encountering a broken rail. Sensitivity of the rail support spacing of the relative position of the rail breakage between two adjacent rail supports and of running speed were analysed for two different elasticities of the rail fastening system. In none of the cases analysed was observed an appreciable difference between either of the elastic systems. As was expected, the most unfavourable situations were those with greater rail support spacing and those with greater distance from the breakage to the nearest rail support, although in none of the simulations performed did a derailment occur when running over the broken rail. When varying the running speed, the most favourable condition was obtained for an intermediate speed, due to the superposition of two antagonistic effects.

Improved design of an overhead rail current conductor for application in underground lines

Overhead rail current collector systems for railway traction offer certain features, such as low installation height and reduced maintenance, which make them predominantly suitable for use in underground train infrastructures. Due to the increased demands of modern catenary systems and higher running speeds of new vehicles, a more capable design of the conductor rail is needed. A new overhead conductor rail has been developed and its design has been patented [13]. Modern simulation and modelling techniques were used in the development approach. The new conductor rail profile has a dynamic behaviour superior to that of the system currently in use. Its innovative design permits either an increase of catenary support spacing or a higher vehicle running speed. Both options ensure savings in installation or operating costs. The simulation model used to optimise the existing conductor rail profile included both a finite element model of the catenary and a three-dimensional multi-body system model of the pantograph. The contact force that appears between pantograph and catenary was obtained in simulation. A sensitivity analysis of the key parameters that influence in catenary dynamics was carried out, finally leading to the improved design.

Comparison of vibration and rolling noise emission of resilient and solid monobloc railway wheels in underground lines

Flat or worn wheels rolling on rough or corrugated tracks can provoke airborne noise and ground-borne vibration, which can be a serious concern for nearby neighbours of urban rail transit lines. Among the various treatments used to reduce vibration and noise, resilient wheels play an important role. In conventional resilient wheels, a slightly prestressed V­shaped rubber ring is mounted between the steel wheel centre and tyre. The elastic layer enhances rolling noise and vibration suppression, as well as impact reduction on the track. In this paper the effectiveness of resilient wheels in underground lines, in comparison to monobloc ones, is assessed. The analysed resilient wheel is able to carry greater loads than standard resilient wheels used for light vehicles. It also presents a greater radial resiliency and a higher axial stiffness than conventional V­wheels. The finite element method was used in this study. A quarter car model was defined, in which the wheelset was modelled as an elastic body. Several simulations were performed in order to assess the vibrational behaviour of elastic wheels, including modal, harmonic and random vibration analysis, the latter allowing the introduction of realistic vertical track irregularities, as well as the influence of the running speed. Due to numerical problems some simplifications were needed. Parametric variations were also performed, in which the sensitivity of the whole system to variations of rubber prestress and Poisson’s ratio of the elastic material was assessed.Results are presented in the frequency domain, showing a better performance of the resilient wheels for frequencies over 200 Hz. This result reveals the ability of the analyzed design to mitigate rolling noise, but not structural vibrations, which are primarily found in the lower frequency range.

Caracterización molecular del mutante riso 1508 de cebada : modificaciones transcripcionales y posttranscripcionales en el desarrollo de la semilla

La semilla es el principal órgano reproductivo de las plantas espermatofitas, permitiendo la dispersión de las poblaciones y asegurando su supervivencia gracias a su tolerancia a la desecación y a su capacidad para germinar bajo condiciones ambientales óptimas. El rendimiento y valor económico de los cereales, que constituyen la primera cosecha mundial, depende, en buena medida, de la eficacia con que se acumulan en la semilla sustancias de reserva: proteínas, carbohidratos y lípidos. El principal carbohidrato acumulado en la semilla de cebada es el almidón y la fracción mayoritaria de proteínas es la de las prolaminas (solubles en etanol al 70%); estas proteínas tienen muy bajo contenido en lisina, un aminoácido esencial en la dieta de animales monogástricos. Con el fin de mejorar el valor nutricional de la semilla de cebada, se han obtenido diferentes mutantes con un mayor contenido en este aminoácido. Riso 1508 es un mutante de cebada rico en lisina cuya mutación lys3a, de efectos pleiotrópicos, segrega como un único gen mendeliano. Entre otros, presenta una reducción drástica de la expresión de algunos genes que codifican proteínas de reserva de tipo prolamina, en concreto, presenta reducida la expresión de los genes que codifican B-, C- y ϒ-Hordeínas y del inhibidor de tripsina CMe, pero no tiene alterada la expresión del gen que codifica las D-Hordeínas. Este último gen carece en su promotor del motivo GLM (5’‐(G/A)TGA(G/C)TCA(T/C)‐3’), que es reconocido por factores transcripcionales bZIP. En este trabajo, el mutante de cebada Riso 1508 se ha utilizado como herramienta para profundizar en el conocimiento de la regulación génica en semillas durante las fases de la maduración y la germinación. Para ello, en una primera aproximación, se llevó a cabo un análisis transcriptómico comparando el genotipo mutante con el silvestre durante la maduración de la semilla. Además de confirmar variaciones en los genes que codifican proteínas de reserva, este análisis indicó que también estaban afectados los genes relacionados con metabolismo de carbohidratos. Por ello se decidió caracterizar la familia multigénica de sacarosas sintasa (SUSy) en cebada. Se anotaron dos nuevos genes, HvSs3 y HvSs4, cuya expresión se comparó con la de los genes HvSs1 y HvSs2, previamente descritos en el laboratorio. La expresión de los cuatro genes en tejidos diferentes y su respuesta a estreses abióticos se analizó mediante RT-qPCR. HvSs1 y HvSs2 se expresaron preferencialmente durante el desarrollo del endospermo, y HvSs1 también fue un tránscrito abundante durante la germinación. HvSs1 se indujo en hojas en condiciones de anoxia y HvSs3 por estrés hídrico, y ambos genes se indujeron por tratamientos de frío. La localización subcelular de las cuatro isoformas no fue sólo citoplásmica, sino que también se localizaron en zonas próximas a retículo endoplásmico y en la cara interna de la membrana plasmática; además, se observó una co-localización de HvSS1 con el marcador de mitocondrias. Estos datos sugieren un papel distinto aunque parcialmente solapante de las cuatro Sacarosa Sintasas de cebada, descritas hasta la fecha. Las cinéticas de expresión de los genes que codifican los TFs más importantes implicados en la regulación génica durante el desarrollo del endospermo de cebada, se analizaron por RT-qPCR en ambos genotipos, demostrando que los TFs de la clase DOF aparecieron desregulados durante todo el proceso en Riso 1508 comparado con el cv. Bomi, aunque también se observaron diferencias significativas en algunos de los que codifican bZIPs. Estudios previos indicaban que el ortólogo de BLZ2 en maíz, O2, se regula post-traduccionalmente mediante un mecanismo de fosforilación/defosforilación reversible, y que la forma defosforilada es la fisiológicamente activa. En este trabajo se demostró que BLZ2 está sujeto a este tipo de regulación y que la proteín-fosfatasa HvPP2C2 está implicada en el proceso. La interacción de HvPP2C2 y BLZ2 tiene lugar en el núcleo celular únicamente en presencia de 100 μM ABA. En el mutante Riso 1508, BLZ2 se encuentra en un estado hiperfosforilado tanto durante la maduración como durante la germinación de la semilla, lo que dificultaría la unión de BLZ2 a las secuencias GLM en los promotores de los genes que codifican B-, C-,y ϒ- Hordeínas y CMe. Summary The seed is the main reproductive organ of spermatophyte plants allowing the spread of populations and ensuring their survival through its desiccation tolerance and because of their ability to germinate under optimum environmental conditions. Yield and economic value of cereal crops, that constitute the first world crop, depend largely on the efficiency with which they accumulate in the seed reserve substances: proteins, carbohydrates and lipids. The main carbohydrate accumulated in the barley seed is starch and the major protein fraction is that of prolamins (soluble in 70% ethanol); these proteins have a very low lysine content, an essential amino-acid for the diet of monogastric animals. In order to improve the nutritional value of the barley seed, different mutants have been obtained with a higher content of this amino-acid. Riso 1508 is one lysine-rich mutant whose mutation (lys3a) segregates as a single Mendelian gene with pleiotropic effects, such as a drastic reduction of genes encoding the trypsin inhibitor CMe and the B-, C-and ϒ-hordeins, but has not altered the expression of the gene encoding the D-hordeins. This latter gene lacks in its promotor the GLM motif (5’‐(G/A)TGA(G/C)TCA(T/C)‐3’), that is recognised by bZIP transcription factors In this work we have used the barley mutant Riso 1508 as a tool for better understanding gene regulation in seeds during the maturation and germination phases. To this aim, a transcriptomic analysis was performed comparing wild and mutant genotypes during seed maturation. Besides confirming variations in the expression of genes encoding reserve proteins, this analysis indicated that some genes related with carbohydrate metabolism were also affected. It was therefore decided to characterize the multigene family of sucrose synthases (SUSy) in barley. Two new genes were annotated, HvSs3 and HvSs4, and its expression was compared with that of genes HvSs1 and HvSs2, previously described in our laboratory. The expression of the four genes in different tissues and in response to abiotic stresses was analyzed by RTqPCR. HvSs1 and HvSs2 were preferentially expressed during the development of the endosperm, and the HvSs1 transcript was also abundant upon germination. HvSs1 was induced in leaves by anoxic conditions, HvSs3 by water stress, and both genes were induced by cold treatments. The subcellular localization of all four isoforms was not only cytoplasmic, but they could be found along the endoplasmic reticulum and at the inner side of the cell membrane; HvSS1, was also associated with the mitochondrial marker. These data suggest a distinct but partially overlapping roles for the barley sucrose synthases, described so far. The expression kinetics of the genes encoding the most important TFs involved in gene regulation during barley endosperm development was analyzed by RT-qPCR in both genotypes. These data show that the genes encoding DOF TFs were mis-regulated throughout the process in Riso 1508, although significant differences were also found among some of those encoding bZIPs. Previous studies indicated that the BLZ2 orthologue in maize, O2, was post-translationally regulated by reversible phosphorylation/dephosphorylation and that the dephosphorylated protein is the physiologically active form. In this work we demostrate that BLZ2 is under a similar regulation and that the proteinphosphatase HvPP2C2 is implicated in the process. The interaction between HvPP2C2 and BLZ2 takes place in the cell nucleus only in the presence of 100 μM ABA. In the Riso 1508 mutant, BLZ2 is found in a hyperphosphorylated state in the maturation phase and upon seed germination; because of this, the BLZ2 binding to the GLM promoter sequences of genes encoding B-, C- y ϒ- Hordeins and CMe would be decreased in the mutant.

Underground parking structure built with deep foundations and vault precast elements in Spain

In many cases the only places available for the construction of a new car park are the existing streets or roads. These streets may also have important or historic buildings very close to the structure, which means that they cannot be disturbed in any way during the construction of the parking structure. In many cases the only places available for the construction of a new car park are the existing streets or roads. These streets may also have important or historic buildings very close to the structure, which means that they cannot be disturbed in any way during the construction of the parking structure.

Application of protection means against explosions in underground mines

Underground coal mines explosions generally arise from the inflammation of a methane/air mixture. This explosion can also generate a subsequent coal dust explosion. Traditionally such explosions have being fought eliminating one or several of the factors needed by the explosion to take place. Although several preventive measures are taken to prevent explosions, other measures should be considered to reduce the effects or even to extinguish the flame front. Unlike other protection methods that remove one or two of the explosion triangle elements, namely; the ignition source, the oxidizing agent and the fuel, explosion barriers removes all of them: reduces the quantity of coal in suspension, cools the flame front and the steam generated by vaporization removes the oxygen present in the flame. The present paper is essentially based on the comprehensive state-of–the-art of Protective Systems in underground coal mines, and particularly on the application of Explosion Barriers to improve safety level in Spanish coal mining industry. After an exhaustive study of series EN 14591 standards covering explosion prevention and protection in underground mines, authors have proven explosion barriers effectiveness in underground galleries by Full Scale Tests performed in Polish Barbara experimental mine, showing that the barriers can reduce the effects of methane and/or flammable coal dust explosions to a satisfactory safety level.