On the trend of prawn catches in bottom trawls in inshore waters off Kakinada (Andhra Pradesh)

From the results of fishing operations during 3 years (from August 1963 to July 1966) attempts were made to study the extent of availability of prawns for bottom trawls. It was found that prawns formed 22.5% of the total catch on an average of the catch rate of 12.3 kg per trawling hour. The prawns were found to be abundant during two periods from November to February and again from April to July. The depth range of 11-15 m yielded better catch rate with best frequency of the optimum catch per hour.

On-line topographic analysis in the SEM

A novel method for on-line topographic analysis of rough surfaces in the SEM has been investigated. It utilises a digital minicomputer configured to act as a programmable scan generator and automatic focusing unit. The computer is coupled to the microscope through digital-to-analogue converters which enable it to generate ramp waveforms allowing the beam to be scanned over a small sub-region of the field under program control. A further digital-to-analogue converter regulates the current supply to the objective lens of the microscope. The video signal is sampled by means of an analogue-to-digital converter and the resultant binary code stored in the computer's memory as an array of numbers describing relative image intensity. Computations based on the intensity gradient of the image allow the objective lens current to be found for the in-focus condition, which may be related to the working distance through a previous calibration experiment. The sensitivity of the method for detecting small height changes is theoretically of the order of 1 μm. In practice the operator specifies features of interest by means of a mobile spot cursor injected into the SEM display screen, or he may scan the specimen at sub-regions corresponding to pre-determined points on a regular grid defined by him. The operation then proceeds under program control. | A novel method for on-line topographic analysis of rough surfaces in the SEM has been investigated. It utilizes a digital minicomputer configured to act as a programmable scan generator and automatic focusing unit. A further digital-to-analog converter regulates the current supply to the objective lens of the microscope. The video signal is sampled by means of an analog-to-digital converter and the resultant binary code stored in the computer's memory as an array of numbers describing relative image intensity. The sensitivity of the method for detecting small height changes is theroretically of the order of 1 mu m.

ON-LINE STEREO PROCESSING FOR THE SEM.

A convenient system for the rapid extraction of three dimensional information from pairs of SEM images has been constructed, eliminating the need for time-consuming photography. Results are produced in a digestable form. Distortions inherent in the SEM record display and in the photographic system are not relevant to the system described; only those arising within the column and stage need be considered.

Bottom trawl codend mesh selectivity for Bagrus docmac (Forskahl) from Lake Victoria, with some remarks on the proposed trawl fishery

The methods of estimating codend selectivity for alternate hauls are briefly described and applied to Bagrus docmac (forskahl) data from Lake Victoria. Certain inconsistencies are noted and it is postulated that they may be due to differential escapement of larger Bagrus docmac through the trawl meshes when the different codends were fitted. The calculated 50% selection lengths yielded a fair regression on measured weigh give a fork length selection factor of 2.33, consistent with data from the smallest codend mesh size used. The implications of the findings are briefly discussed in relation to the proposed Haplochromis trawl fishery 1971.

On the domain decomposition and transmission line modelling finite element method for time-domain induction motor analysis

This paper demonstrates how a finite element model which exploits domain decomposition is applied to the analysis of three-phase induction motors. It is shown that a significant gain in cpu time results when compared with standard finite element analysis. Aspects of the application of the method which are particular to induction motors are considered: the means of improving the convergence of the nonlinear finite element equations; the choice of symmetrical sub-domains; the modelling of relative movement; and the inclusion of periodic boundary conditions. © 1999 IEEE.

Application of domain decomposition and transmission line modelling techniques to 2D, time-domain, finite element problems

In this paper a recently published finite element method, which combines domain decomposition with a novel technique for solving nonlinear magnetostatic finite element problems is described. It is then shown how the method can be extended to, and optimised for, the solution of time-domain problems. © 1999 IEEE.

Carbon based bottom gate thin film transistor

This paper describes the fabrication and characterization of a carbon based, bottom gate, thin film transistor (TFT). The active layer is formed from highly sp2 bonded nitrogenated amorphous carbon (a-C:N) which is deposited at room temperature using a filtered cathodic vacuum arc technique. The TFT shows p-channel operation. The device exhibits a threshold voltage of 15 V and a field effect mobility of 10-4 cm2 V-1 s-1 . The valence band tail of a-C:N is observed to be much shallower than that of a-Si:H, but does not appear to severely impede the shift of the Fermi level. This may indicate that a significant proportion of the a-C tail states can still contribute to conduction.

Investigations on the bottom conditions and the possibilities for marine prawn and fish trawling on the north and east coast of Ceylon

The execution of this survey was decided upon by Swedevelop in agreement with the Sri Lanka Fisheries Corporation and was a part of the investigations and studies for a fishery project at Trincomalee which was carried out by Scandia Consult. The main purpose was to investigate the following aspects: bottom conditions, especially prawn trawling conditions; size of the potential prawn trawling catches; size and quality of the potential fish trawling catches; suitable sizes and types of boats and trawling gear; duration of trawl fishing season.

Results of a stratified random bottom trawl survey for scad and mackerel in Mozambican waters, from May to June 1984

The total abundance of small pelagic species in Mozambican waters was estimated to be 100 (plus or minus 45) thousand tonnes of which scad and mackerel constituted 57 (plus or minus 39) thousand tonnes. These abundance estimates must be considered as minimum estimates of biomass as the efficiency of the trawl was assumed to be equal to 1.0.

Results of a random stratified bottom trawl survey for scad and mackerel stocks in Mozambican waters: small pelagic fish December-January 1985

The results obtained during the third phase of Nauka are reported concerning the standing stock estimates, population length structure and gonad development of scad and mackerel stocks and the catch composition in Mozambican waters.

Selected trace metal concentration in bottom water and sediments of Kyoga basin lakes, and its potential to aquatic pollution

Although other research studies on areas such as the physical-chemical, nutrients and phytoplankton status of Lake Kyoga systems have been given a lot of attention (e.g. Mungoma 1988 and NaFIRRI 2006), efforts to determine the pollution status of this system, especially by heavy metals as one of the worldwide emerging environmental problems, is still limited. Many trace metals are regarded as serious pollutants of aquatic ecosystems because of their persistence, toxicity and ability to be incorporated into food chains (Mwamburi J., and Nathan O.F., 1997). Given the rapid human population growth and the associated economic activities both within the rural and urban areas in Uganda, such fish production systems are becoming very prone to various kinds of pollution including that by heavy metals. Anthropogenic factors such deforestation, use of chemicals and dumping of metallic products, spillages of fuels from outboard engines and many others and or natural processes involving atmospheric deposition by wind or rain, surface run-offs and streams flows from the catchment introduces heavy metals into the lake environment,.

An analysis of the experimental pole and line fishery conducted around Sri Lanka by Nichiro Fishing Company of Japan

Under a joint agreement the Government of Sri Lanka and the Nichiro Fishing Company of Japan have undertaken an experimental pole and line fishery around Sri Lanka with a view to determining the feasibility of establishing a joint commercial venture. 3 Japanese vessels conducted trials during the period March 1973-October 1974. Details of the vessels and cruises are given. A variety of fish were tried as bait, and the selection of appropriate bait is discussed. Catches and catch and effort statistics are presented, with tables showing distribution of the tuna. The results of the trials were below expectations, and are in part attributed to bait availability, and unfavorable weather conditions. Seasonal variation of the type of fishery is suggested in order to take account of this, and it is concluded that a fishery based on 45/50 ft combined pole and line and drift net fishing vessels might prove feasible.

Simplifying mooring analysis for deepwater systems using truncation

Over recent years academia and industry have engaged with the challenge of model testing deepwater structures at conventional scales. One approach to the limited depth problem has been to truncate the lines. This concept will be introduced, highlighting the need to better understand line dynamic processes. The type of line truncation developed here models the upper sections of each line in detail, capturing wave action and all coupling effects with the vessel, terminating to an approximate analytical model that aims to simulate the remainder of the line. A rationale for this is that in deep water transverse elastic waves of a line are likely to decay before they are reflected at the seabed because of nonlinear hydrodynamic drag forces. The first part of this paper is centered on verification of this rationale. A simplified model of a mooring line that describes the transverse dynamics in wave frequency is used, adopting the equation of motion of an inextensible taut string. The line is submerged in still water, one end fixed at the bottom the other assumed to follow the vessel response, which can be harmonic or random. A dimensional analysis, supported by exact benchmark numerical solutions, has shown that it is possible to produce a universal curve for the decay of transverse vibrations along the line, which is suitable for any kind of line with any top motion. This has a significant engineering benefit, allowing for a rapid assessment of line dynamics - it can be useful in deciding whether a truncated line model is appropriate, and if so, at which point truncation might be applied. This is followed by developing a truncation mechanism, formulating an end approximation that can reproduce the correct impedance, had the line been continuous to full depth. It has been found that below a certain length criterion, which is also universal, the transverse vibrational characteristics for each line are inertia driven. As such the truncated model can assume a linear damper whose coefficient depends on the line properties and frequency of vibration. Copyright © 2011 by the International Society of Offshore and Polar Engineers (ISOPE).