China's regional economies and value chains : an interregional input-output analysis

Attempts to understand China’s role in global value chains have often noted the case of Apple's iPhone production, in particular the fact that the value added during the Chinese portion of the iPhone’s supply chain is no more than 4%. However, when we examine the Chinese economy as a whole in global production networks, China’s share in total induced value added by China’s exports of final products to the USA is about 75% in 2005. This leads us to investigate how Chinese value added is created and distributed not only internationally but also domestically. To elucidate the increasing complexity of China’s domestic production networks, this paper focuses on the measure of Domestic Value Chains (DVCs) across regions and their linkages with global markets. By using China’s 1997 and 2007 interregional input-output tables, we can understand in detail the structural changes in domestic trade in terms of value added, as well as the position and degree of participation of different regions within the DVCs.

Tracing CO2 emissions in global value chains

This paper integrates two lines of research into a unified conceptual framework: trade in global value chains and embodied emissions. This allows both value added and emissions to be systematically traced at the country, sector, and bilateral levels through various production network routes. By combining value-added and emissions accounting in a consistent way, the potential environmental cost (amount of emissions per unit of value added) along global value chains can be estimated. Using this unified accounting method, we trace CO2 emissions in the global production and trade network among 41 economies in 35 sectors from 1995 to 2009, basing our calculations on the World Input–Output Database, and show how they help us to better understand the impact of cross-country production sharing on the environment.

Input-output-based genuine value added and genuine productivity in China's industrial sectors (1995-2010)

The rapid growth of China's economy has brought about huge losses of natural capital in the form of natural resource depletion and damages from carbon emissions. This paper recalculates value added, capital formation, capital stock, and related multifactor productivity in China's industrial sectors by further developing the genuine savings method of the World Bank. The sector-level natural capital loss was calculated using China's official input–output table and their extensions for tracing final consumers. The capital output elasticity in the productivity estimation was adjusted based on these tables. The results show that although the loss of natural capital in China's industrial sectors in terms of value added has slowed, the impacts on their productivity during the past decades is still quite clear.

Production fragmentation, upstreamness, and value-added : evidence from factory Asia 1990-2005

We exploit the recent release of the 2005 Asian Input-Output Matrix to dress a picture of the geographic fragmentation of value added in Factory Asia from 1990 to 2005. We document 3 stylized facts. The first is that the average share of foreign value added embedded in production rose by about 7 percentage points between 1990 and 2005, from 9% to 16%. The second is that, contrary to popular belief, China's production embeds a smaller share of foreign value added than other Factory Asia countries'. Between 1990 and 2005 among Factory Asia countries China grew most after Japan as a source of value added to other countries' production. Third, country-industries at the upstream and downstream extremities of the supply chain embed a smaller share of foreign value added than those with intermediate levels of upstreamness.

Using the input-output approach to measure participation in GVCs : the case of Costa Rica

In order to illustrate how the input-output approach can be used to explore various aspects of a country's participation in GVCs, this paper applies indicators derived from the concept of trade in value-added (TiVA) to the case of Costa Rica. We intend to provide developing countries that seek to foster GVC-driven structural transformation with an example that demonstrates an effective way to measure progress. The analysis presented in this paper makes use of an International Input-Output Table (IIOT) that was constructed by including Costa Rica's first Input-Output Table (IOT) into an existing IIOT. The TiVA indicator has been used to compare and contrast import flows, export flows and bilateral trade balances in terms of gross trade and trade in value-added. The country's comparative advantage is discussed based on a TiVA-related indicator of revealed comparative advantage. The paper also decomposes the domestic content of value added in each sector and measures the degree of fragmentation in the value chains in which Costa Rica participates, highlighting the partner countries that add the most value.

Technical Challenges in the Construction of Gothic Vaults: The Gothic Theory of Structural Design

The construction of a Gothic vault implied the solution of several technical challenges. The literature on Gothic vault construction is quite large and its growth continues steadily. The main challenge of any structure is that, during and after construction, it must be "safe", that is, it must not collapse. Indeed, it must be amply safe, able to support different loads for long periods of time. Masonry architecture has shown its structural safety for centuries or millennia. The Pantheon of Rome stands today after almost 2,000 years without having needed any structural reinforcement (of course, the survival of any building implies continuous maintenance) . Hagia Sophia in Istanbul, finished in the 6th century AD, has withstood not only the dead loads but also many severe earthquakes . Finally, the Gothic cathedrals, with their appearance of weakness, are• more than a half millennium old. The question arises of what the source of this amazing strength is and how the illiterate master masons were able to design such daring and safe structures . This question is usually evaded in manuals of Gothic architecture. This is quite surprising, the structure being a fundamental part of Gothic buildings. The present article aims to give such an explanation, which has been studied in detail elsewhere. In the first part, the Gothic design methods "V ill be discussed. In the second part, the validity of these methods wi11 be verified within the frame of the modern theory of masonry structures . References have been reduced to a minimum to make the text simpler and more direct.

Monte Carlo simulation of circular grain growth

Monte Carlo simulations have been carried out to study the effect of temperature on the growth kinetics of a circular grain. This work demonstrates the importance of roughening fluctuations on the growth dynamics. Since the effect of thermal fluctuations is stronger in d =2 than in d =3, as predicted by d =3 theories of domain kinetics, the circular domain shrinks linearly with time as A (t)=A(0)-αt, where A (0) and A(t) are the initial and instantaneous areas, respectively. However, in contrast to d =3, the slope α is strongly temperature dependent for T≥0.6TC. An analytical theory which considers the thermal fluctuations agrees with the T dependence of the Monte Carlo data in this regime, and this model show that these fluctuations are responsible for the strong temperature dependence of the growth rate for d =2. Our results are particularly relevant to the problem of domain growth in surface science

Diseño de una Metodología de Política Pública de I+D+i para el Desarrollo de la Capacidad de la Innovación en el Sector PYMIS del estado Bolívar, Venezuela

El estado Bolívar con una superficie de 238.000 Km2 se encuentra ubicado al SE de Venezuela y su capital es Ciudad Bolívar. Ocupa el 26,24% de la superficie del territorio nacional. Ciudad Guayana es la principal región del desarrollo económico del estado siendo sede de las empresas básicas de los sectores siderúrgicos y del aluminio que se encargan de la extracción, procesamiento y transformación del mineral de hierro y de la transformación de la bauxita en aluminio primario. Además, cuenta con un gran potencial hidroeléctrico, garantizando el suministro de energía eléctrica para el funcionamiento de las empresas básicas, para el parque industrial de la región, así como para el desarrollo industrial, económico y social de la nación. Con relación al sector de la industria del mineral de hierro y del aluminio, las empresas destinan más del 60 por ciento de su producción al mercado internacional. A pesar de que el sector de las Pequeñas y Medianas Industrias (PYMIS) del estado Bolívar cuenta con un mercado cercano y seguro, no se le ha propiciado un desarrollo integral en términos de orientar sus esfuerzos en innovar en nuevos productos o mejoras de procesos. Debido a la falta del personal de investigación calificado, la escasa vinculación con centros de investigación, la baja inversión en investigación, desarrollo tecnológico e innovación (I+D+i), la ausencia de la aplicación de una política pública de I+D+i y la desarticulación de los miembros del Sistema Regional de Innovación (SRI), constituyen los principales obstáculos para generar bienes y servicios con un alto valor agregado. Esta situación desequilibra y hace ineficiente el funcionamiento del SRI. La baja capacidad de las PYMIS del estado Bolívar en I+D+i, es una situación que impide generar por si sola nuevos productos o procesos para satisfacer las demandas del mercado regional. Por lo tanto, se requiere de la intervención y participación activa de la institución gubernamental responsable del diseño y aplicación de una política pública de I+D+i para dinamizar la capacidad de innovación en las PYMIS, en su articulación y vinculación con los miembros del SRI. xiii El presente proyecto se planteó como objetivo diseñar una metodología de política pública de I+D+i para liderar, coordinar y direccionar el SRI del estado Bolívar, para el desarrollo de la capacidad de innovación en el sector industrial y específicamente en las PYMIS. La presente tesis representa una investigación no experimental de tipo proyectivo que analiza la situación actual del Sistema Regional de Innovación del estado Bolívar. El análisis de los resultados se ha dividido en tres fases. En la primera se realizan diagnósticos por medio de encuestas de las PYMIS en materia de I+D+i, de los centros y laboratorios de investigación pertenecientes a las universidades de la región en el área de Materiales y de los sectores financieros público y privado. En dichas encuestas se evalúa el nivel de integración con los entes gubernamentales que definen y administran la política pública de I+D+i. En la segunda fase, con el diagnóstico y procesamiento de los resultados de la primera fase, se procede a desarrollar un análisis de las fortalezas, oportunidades, debilidades y amenazas (FODA) del Sistema Regional de Innovación, permitiendo comprender la situación actual de la relación y vinculación de las PYMIS con los centros de investigación, instituciones financieras y entes gubernamentales. Con la problemática detectada, resultó necesario el diseño de estrategias y un modelo de gestión de política pública de I+D+i para la articulación de los miembros del SRI, para el apoyo de las PYMIS. En la tercera fase se diseña la metodología de política pública de I+D+i para fortalecer la innovación en las PYMIS. La metodología se representa a través de un modelo propuesto que se relaciona con las teorías de los procesos de innovación, con los modelos de sistemas de innovación y con las reflexiones y recomendaciones hechas por diferentes investigadores e instituciones de cooperación internacional referentes a la aplicación de políticas públicas de I+D+i para dinamizar la capacidad de innovación en el sector industrial. La metodología diseñada es comparada con diferentes modelos de aplicación de política pública de I+D+i. Cada modelo se representa en una figura y se analiza su xiv situación presente y la función que desempeña el ente gubernamental en la aplicación del enfoque de política pública de I+D+i. El diseño de la metodología de política pública de I+D+i propuesta aportará nuevos conocimientos y podrá ser aplicado para apoyar el progreso de la I+D+i en las PYMIS de la región, como caso de estudio, con el fin de impulsar una economía más competitiva y reducir el grado de dependencia tecnológica. La metodología una vez evaluada podrá ser empleada en el contexto de la gran industria y en otras regiones de Venezuela y además, puede aplicarse en otros países con características similares en su tejido industrial. En la tesis doctoral se concluye que el desarrollo de la capacidad de innovación en las PYMIS depende del diseño y aplicación de la política pública de I+D+i como elemento dinamizador y articulador del SRI del estado Bolívar. xv ABSTRACT The Bolivar state with an area of 238,000 km2 is located in the SE of Venezuela and its capital is Ciudad Bolivar. It occupies a surface which is 26.24% of the national territory. Ciudad Guayana is the main area of the state's economic development and the location of the corporate headquarters of the basic steel and aluminum sectors that are responsible for the extraction, processing and transformation of iron ore and bauxite processing for primary aluminum. It also has a great hydroelectric potential, ensuring the supply of electricity for the operation of enterprises, for the regional industrial park as well as for the industrial, economic and social development of the nation. With regard to the iron ore and aluminum industry, companies allocate more than 60 percent of their production to the international market. Although the sector of Small and Medium Industries (SMIs) of the Bolivar state has a secure market, it has not been led to an integral development in terms of targeting its efforts on innovating new products or improving processes. Due to the lack of qualified research staff, poor links with research centers, low investment in research, technological development and innovation (R & D & I), the absence of the implementation of a public policy for R & D & I and the dismantling of the members of the Regional Innovation System (RIS), are the main obstacles to generate goods and services with high added value. This situation makes the RIS unbalanced and inefficient. The low capacity of Bolivar state’s SMIs in R & D & I, is a situation that cannot generate by itself new products or processes to meet regional market demands. Therefore, it requires the active involvement and participation of the government institution responsible for the design and implementation of R & D & I public policy to boost the innovation capacity in SMIs, through the connection and integration with members of the RIS. This project is intended to design a methodology aimed at public policy for R & D & I to lead, coordinate and direct the RIS of Bolivar state, for the development of innovation capacity in the industrial sector and specifically in the SMIs. xvi This thesis is an experimental investigation of projective type which analyzes the current situation of the Regional Innovation System of the Bolivar state. The analysis of the results is divided into three phases. In the first one, a diagnosis is performed through surveys of SMIs in R & D & I centers and research laboratories belonging to the universities of the region in the area of materials and public and private financial sectors. In such surveys the level of integration with government agencies that define and manage the public policy of R & D & I is assessed. In the second phase, with the diagnosis and processing of the results of the first phase, we proceed to develop an analysis of the strengths, weaknesses, opportunities and threats (SWOT) of the Regional Innovation System, allowing the comprehension of the current status of the relationship of SMIs with research centers, financial institutions and government agencies. With the problems identified it was necessary to design strategies and a model of public policy management of R & D & I for the articulation of the members of the RIS, to support the SMIs. In the third phase a public policy methodology for R & D & I is designed in order to strengthen innovation in SMIs. The methodology is shown through a proposed model that relates to the theories of the innovation process, with models of innovation systems and with the discussions and recommendations made by different researchers and institutions of international cooperation concerning the implementation of policies public for R & D & I to boost innovation capacity in the industrial sector. The methodology designed is compared with different models of public policy implementation for R & D & I. Each model is represented in a figure and its current situation and the role of the government agency in the implementation of the public policy approach to R & D & I is analyzed. The design of the proposed public policy methodology for R & D & I will provide new knowledge and can be applied to support the progress of R & D & I in the region’s SMIs, as a case study, in order to boost a more competitive economy and reduce the degree of technological dependence. After being evaluated the methodology can be used in the context of big industry and in other regions of Venezuela and can also be applied in other countries with similar characteristics in their industrial structure. xvii The thesis concludes that the development of the innovation capacity in SMIs depends on the design and implementation of the public policy for R & D & I as a catalyst and coordination mechanism of the Regional Innovation System of the Bolivar state.

Analysis of service-oriented computing systems

La computación basada en servicios (Service-Oriented Computing, SOC) se estableció como un paradigma ampliamente aceptado para el desarollo de sistemas de software flexibles, distribuidos y adaptables, donde las composiciones de los servicios realizan las tareas más complejas o de nivel más alto, frecuentemente tareas inter-organizativas usando los servicios atómicos u otras composiciones de servicios. En tales sistemas, las propriedades de la calidad de servicio (Quality of Service, QoS), como la rapídez de procesamiento, coste, disponibilidad o seguridad, son críticas para la usabilidad de los servicios o sus composiciones en cualquier aplicación concreta. El análisis de estas propriedades se puede realizarse de una forma más precisa y rica en información si se utilizan las técnicas de análisis de programas, como el análisis de complejidad o de compartición de datos, que son capables de analizar simultáneamente tanto las estructuras de control como las de datos, dependencias y operaciones en una composición. El análisis de coste computacional para la composicion de servicios puede ayudar a una monitorización predictiva así como a una adaptación proactiva a través de una inferencia automática de coste computacional, usando los limites altos y bajos como funciones del valor o del tamaño de los mensajes de entrada. Tales funciones de coste se pueden usar para adaptación en la forma de selección de los candidatos entre los servicios que minimizan el coste total de la composición, basado en los datos reales que se pasan al servicio. Las funciones de coste también pueden ser combinadas con los parámetros extraídos empíricamente desde la infraestructura, para producir las funciones de los límites de QoS sobre los datos de entrada, cuales se pueden usar para previsar, en el momento de invocación, las violaciones de los compromisos al nivel de servicios (Service Level Agreements, SLA) potenciales or inminentes. En las composiciones críticas, una previsión continua de QoS bastante eficaz y precisa se puede basar en el modelado con restricciones de QoS desde la estructura de la composition, datos empiricos en tiempo de ejecución y (cuando estén disponibles) los resultados del análisis de complejidad. Este enfoque se puede aplicar a las orquestaciones de servicios con un control centralizado del flujo, así como a las coreografías con participantes multiples, siguiendo unas interacciones complejas que modifican su estado. El análisis del compartición de datos puede servir de apoyo para acciones de adaptación, como la paralelización, fragmentación y selección de los componentes, las cuales son basadas en dependencias funcionales y en el contenido de información en los mensajes, datos internos y las actividades de la composición, cuando se usan construcciones de control complejas, como bucles, bifurcaciones y flujos anidados. Tanto las dependencias funcionales como el contenido de información (descrito a través de algunos atributos definidos por el usuario) se pueden expresar usando una representación basada en la lógica de primer orden (claúsulas de Horn), y los resultados del análisis se pueden interpretar como modelos conceptuales basados en retículos. ABSTRACT Service-Oriented Computing (SOC) is a widely accepted paradigm for development of flexible, distributed and adaptable software systems, in which service compositions perform more complex, higher-level, often cross-organizational tasks using atomic services or other service compositions. In such systems, Quality of Service (QoS) properties, such as the performance, cost, availability or security, are critical for the usability of services and their compositions in concrete applications. Analysis of these properties can become more precise and richer in information, if it employs program analysis techniques, such as the complexity and sharing analyses, which are able to simultaneously take into account both the control and the data structures, dependencies, and operations in a composition. Computation cost analysis for service composition can support predictive monitoring and proactive adaptation by automatically inferring computation cost using the upper and lower bound functions of value or size of input messages. These cost functions can be used for adaptation by selecting service candidates that minimize total cost of the composition, based on the actual data that is passed to them. The cost functions can also be combined with the empirically collected infrastructural parameters to produce QoS bounds functions of input data that can be used to predict potential or imminent Service Level Agreement (SLA) violations at the moment of invocation. In mission-critical applications, an effective and accurate continuous QoS prediction, based on continuations, can be achieved by constraint modeling of composition QoS based on its structure, known data at runtime, and (when available) the results of complexity analysis. This approach can be applied to service orchestrations with centralized flow control, and choreographies with multiple participants with complex stateful interactions. Sharing analysis can support adaptation actions, such as parallelization, fragmentation, and component selection, which are based on functional dependencies and information content of the composition messages, internal data, and activities, in presence of complex control constructs, such as loops, branches, and sub-workflows. Both the functional dependencies and the information content (described using user-defined attributes) can be expressed using a first-order logic (Horn clause) representation, and the analysis results can be interpreted as a lattice-based conceptual models.

Recursos intangibles como factores clave en la gestión estratégica de instituciones de educación superior y su impacto en los procesos de innovación

La presente investigación, tiene como objetivo analizar las influencias que ejercen los recursos intangibles (Gestión del Conocimiento, Marca, Reputación Organizacional y Responsabilidad Social) en la gestión estratégica de las instituciones de educación superior (IES) y el impacto de los mismos en los procesos de innovación a través del valor añadido que se transfiere al entorno. Se considera importante realizar un estudio sobre este tema dado que son las IES las encargadas de proporcionar los conocimientos y los nuevos hallazgos en innovaciones tecnológicas, que son transferidas al tejido productivo de las regiones, lo que proporciona crecimiento económico y mejoras en la calidad de vida. El estudio se enmarca dentro de los postulados de la teoría de los recursos y las capacidades (TRC) y de los intangibles, los cuales sirven de base a la investigación. Se planteó un sistema de hipótesis subdividido en dos vías de influencias. La primera, donde se analizan las influencias directas que ejercen los recursos intangibles sobre los resultados de las IES. La otra vía es la indirecta, que estudia las influencias que ejercen los recursos intangibles gestionados estratégicamente sobre los resultados de las IES. Esta investigación se ha concebido como no experimental, de tipo exploratorio, basada en el paradigma que busca explicar un fenómeno (variable dependiente) a través del comportamiento de las variables independientes. Es un estudio transversal, cuantitativo, que intenta describir las causas del fenómeno. Con el objeto de determinar las influencias o relaciones de causalidad que subyacen entre las variables, se utilizó la técnica del modelo de ecuaciones estructurales (SEM). La población objeto de estudio estuvo constituida por los 857 individuos pertenecientes a los consejos directivos de las IES, que forman parte de las base de datos que gestiona el Consorcio de Escuelas de Ingeniería de Latinoamérica y del Caribe y la Universidad Politécnica de Madrid, con un tamaño de muestra significativa de 250 directivos, lo que representa el 29,42% de la población. Como fuentes de recolección de información se utilizaron fuentes primarias y secundarias. Para recabar la información primaria se diseñó un cuestionario (ad hoc), el cual fue validado por expertos. La información de fuentes secundarias se extrajo de la bases de datos de la Red Iberoamericana de Ciencia y Tecnología (RICYT). Los resultados obtenidos indican que las influencias directas que pueden ejercer los recursos intangibles (Gestión del Conocimiento, Marca, Reputación Organizacional y Responsabilidad Social) no son significativas, por ello se rechazaron todas las hipótesis de la vía de influencia directa. Asimismo, de acuerdo con el contraste realizado al submodelo que representa la vía de influencia indirecta, resultaron significativas las influencias que ejercen los intangibles Gestión del Conocimiento y Reputación Organizacional, gestionadas estratégicamente sobre los resultados con valor añadido generado por las IES y transferidos al entorno. Sin embargo, no se apoyan todas las hipótesis del modelo, debido a que los constructos Marca y Responsabilidad Social resultaron no significativos. Las teorías sobre intangibles enmarcadas en la TRC no son del todo robustas y requieren de mayores esfuerzos por parte de los investigadores para lograr definir los constructos a utilizar. De igual forma, se sigue corroborando el desfase que existe entre las teorías que sustentan la investigación y las comprobaciones empíricas de las mismas. Además, se evidencia que las IES enfocan su actuación hacia la academia, por encima de las otras funciones, otorgando a la enseñanza e investigación y a la reputación organizacional una mayor importancia. Sin embargo, debido a su naturaleza no empresarial, las IES siguen manteniendo una filosofía de gestión enfocada a la generación y transmisión de conocimientos que crean reputación. Se excluyen los intangibles Marca y Responsabilidad Social, por considerar que no aportan valor a sus procesos internos o que están inmersos dentro de otros recursos intangibles. En conclusión, se corrobora el atraso de la gestión estratégica que presentan las IES en Latinoamérica. Se comprueba la no aplicación de postulados básicos de la gerencia moderna que contribuyan al manejo eficiente de todos sus recursos y al logro de sus objetivos. Esto deriva en la necesidad de modernizar la visión estratégica de las IES y en crear mejores mecanismos para lograr reconocer, mantener, proteger y desarrollar los Recursos Intangibles que poseen, realizando combinaciones de recursos óptimas, que maximicen la creación de valor para sí mismas y para la sociedad a la que pertenecen. ABSTRACT This research aims to analyze the influences exerted by intangible resources (Knowledge Management, Brand, Organizational Reputation and Social Responsibility) in the strategic management of higher education institutions (HEIs) and their impact in the innovation processes through the added value that is transferred to the environment. It is considered important to conduct a study on this issue since HEIs are responsible for providing knowledge and new findings on technological innovations, which are then, transferred to the productive fabric of these regions, providing economic growth and improvements in quality of life. The study is framed within the tenets of the Theory of Resources and Capabilities (TRC) and of intangibles which underlie this research. A system of hypotheses was raised which was subdivided into two pathways of influences. In the first system the direct influences exerted by intangible resources on the results of the IES are analyzed. The other system focuses on the indirect influences exerted by the strategically managed intangible resources on the HEIs results. This research is designed as experimental, exploratory and based on the paradigm that seeks to explain a phenomenon (the dependent variable) through the behavior of the independent variables. It is a crosssectional, quantitative study, which attempts to describe the causes of the phenomenon. In order to determine the influences or causal relationships among variables the structural equation modeling technique (SEM) was used. The population under study consisted of 857 individuals from the boards of HEIs, which are part of the database managed by the Consortium of Engineering Schools in Latin America and the Caribbean and the Technical University of Madrid, with a significant sample size of 250 managers which represents 29.42% of the population. As sources of information gathering primary and secondary sources were used. To collect primary information an ad-hoc questionnaire which was validated by experts was designed. The secondary information was extracted from the database of the Latin American Network of Science and Technology (RICYT). The results obtained indicate that the direct influences that intangible resources (Knowledge Management, Brand, Organizational Reputation and Social Responsibility) can exert are not significant. Therefore, all hypotheses related to direct influence were rejected. Also, according to the test made with the system which represents the indirect channel of influence, significant influences were exerted on the results with added value generated by the HEIs by the intangibles Knowledge Management and Organizational Reputation when they were managed strategically. However, all model hypotheses are not supported, because the constructs Brand and Social Responsibility were not significant. Theories of intangibles within the framework of the Theory of Resources and Capabilities are not entirely robust and require greater efforts by researchers to define the constructs to be used. Similarly the existing gap between the theories underpinning research and the empirical tests continues to be corroborated. In addition, there is evidence that HEIs focus their action on the academy neglecting the other functions, giving more importance to teaching, research and organizational reputation. However, due to their non-business nature, HEIs still maintain a management philosophy focused on the generation and transmission of knowledge which leads to reputation. The intangibles Brand and Social Responsibility are excluded, considering that they do not add value to their internal processes or are embedded within other intangible resources. In conclusion, the backwardness of HEIs’ strategic management in Latin America is confirmed. The lack of application of the basic principles of modern management that contribute to the efficient administration of all the resources and the achievement of objectives is proven. This leads to the need to modernize the strategic vision of HEIs and the need for better mechanisms to recognize, maintain, protect and develop the intangible resources they possess, achieving optimal combinations of resources in order to maximize the creation of value for them and for the society to which they belong.

NEMAWASHI: Attaining Value Stream alignment within Complex Organizational Networks

In the process of value creation, organizations perform an intense intra-organizational dialog through which internal VS alignment is achieved towards certain strategic objectives. Within the context of complex organizational networks, were goal conflicts are preprogrammed through incentive structures, VS alignment as legitimation of action towards strategic goals has special interest. On the one hand it facilitates the access to necessary resources for goal achievement and on the other it increases the sustainability and supports commonly agreed upon decisions leading to success. This paper provides a winnerless process (WLP) differential equations model for quantifying intra-organizational value stream (VS) alignment dynamics that can help design sustainable lean management solutions. This paper presents ongoing research results that show how the model was implemented in one industrial facility.

A Physicalist View Of The Passion Of Christ

My project in this paper is to provide a plausible idea of Christ’s suffering and death in terms of a theory of the human person. More specifically, I want to contrast two major theories of the person-body relation. One is dualism. Dualism is the view that a human person is composed of two substances, that is, a soul and a body, and he (strictly speaking) is identical with the soul. On the other hand, physicalism is the view that a human person is numerically identical with his biological body. I will argue that dualism is not successful in explaining Christ’s passion for some reasons. Rather, physicalism, as I shall argue, provides a better explanation of how Christ’s physical suffering and death are real just like everyone else’s, so it is philosophically and theologically more plausible than dualism.

ANÁLISE DAS MUDANÇAS DOS FATORES DETERMINANTES DA ESTRUTURA DE CAPITAL EM FUNÇÃO DO CICLO DE VIDA DAS EMPRESAS BRASILEIRAS

As várias teorias acerca da estrutura de capital despertam interesse motivando diversos estudos sobre o assunto sem, no entanto, ter um consenso. Outro tema aparentemente pouco explorado refere-se ao ciclo de vida das empresas e como ele pode influenciar a estrutura de capital. Este estudo teve como objetivo verificar quais determinantes possuem maior relevância no endividamento das empresas e se estes determinantes alteram-se dependendo do ciclo de vida da empresa apoiada pelas teorias Trade Off, Pecking Order e Teoria da Agência. Para alcançar o objetivo deste trabalho foi utilizado análise em painel de efeito fixo sendo a amostra composta por empresas brasileiras de capital aberto, com dados secundários disponíveis na Economática® no período de 2005 a 2013, utilizando-se os setores da BM&FBOVESPA. Como resultado principal destaca-se o mesmo comportamento entre a amostra geral, alto e baixo crescimento pelo endividamento contábil para o determinante Lucratividade apresentando uma relação negativa, e para os determinantes Oportunidade de Crescimento e Tamanho, estes com uma relação positiva. Para os grupos de alto e baixo crescimento alguns determinantes apresentaram resultados diferentes, como a singularidade que resultou significância nestes dois grupos, sendo positiva no baixo crescimento e negativa no alto crescimento, para o valor colateral dos ativos e benefício fiscal não dívida apresentaram significância apenas no grupo de baixo crescimento. Para o endividamento a valor de mercado foi observado significância para o Benefício fiscal não dívida e Singularidade. Este resultado reforça o argumento de que o ciclo de vida influência a estrutura de capital.

The load dependence of kinesin’s mechanical cycle

Kinesin is a dimeric motor protein that transports organelles in a stepwise manner toward the plus-end of microtubules by converting the energy of ATP hydrolysis into mechanical work. External forces can influence the behavior of kinesin, and force-velocity curves have shown that the motor will slow down and eventually stall under opposing loads of ≈5 pN. Using an in vitro motility assay in conjunction with a high-resolution optical trapping microscope, we have examined the behavior of individual kinesin molecules under two previously unexplored loading regimes: super-stall loads (>5 pN) and forward (plus-end directed) loads. Whereas some theories of kinesin function predict a reversal of directionality under high loads, we found that kinesin does not walk backwards under loads of up to 13 pN, probably because of an irreversible transition in the mechanical cycle. We also found that this cycle can be significantly accelerated by forward loads under a wide range of ATP concentrations. Finally, we noted an increase in kinesin’s rate of dissociation from the microtubule with increasing load, which is consistent with a load dependent partitioning between two recently described kinetic pathways: a coordinated-head pathway (which leads to stepping) and an independent-head pathway (which is static).

Experience-dependent, asymmetric expansion of hippocampal place fields

Theories of sequence learning based on temporally asymmetric, Hebbian long-term potentiation predict that during route learning the spatial firing distributions of hippocampal neurons should enlarge in a direction opposite to the animal’s movement. On a route AB, increased synaptic drive from cells representing A would cause cells representing B to fire earlier and more robustly. These effects appeared within a few laps in rats running on closed tracks. This provides indirect evidence for Hebbian synaptic plasticity and a functional explanation for why place cells become directionally selective during route following, namely, to preserve the synaptic asymmetry necessary to encode the sequence direction.