Babies, bodies and entitlement: gendered aspects of access to citizenship in the Republic of Ireland

Since the mid-1990s, automatic citizenship for children born in the Republic has been a source of growing debate against a backdrop of increasing immigration and the peace process. In June 2004, the debate culminated in a referendum, opening the way to a constitutional amendment that attaches residence qualifications to the hitherto unfettered entitlement to citizenship available through ius soli. Arguments for the amendment were couched in terms of a threat posed by Third World women having babies in Ireland to obtain residence, and a putative obligation to the EU to harmonise citizenship laws. This article explores how pregnant foreign women’s bodies became a site of perplexity about the borders of the twenty-first century Irish nation. It is therefore suggested that neither the ‘racial state’ theories nor feminist theories of the nation-state account fully for this. On closer inspection, the seemingly sui generis case of the Irish referendum is therefore fruitful in that it demands further reflection in terms of bridging gaps in the existing theory.

Lattice approach to the dynamics of phase-coded soliton trains

We address the collective dynamics of a soliton train propagating in a medium described by the nonlinear Schrödinger equation. Our approach uses the reduction of train dynamics to the discrete complex Toda chain (CTC) model for the evolution of parameters for each train constituent: such a simplification allows one to carry out an approximate analysis of the dynamics of positions and phases of individual interacting pulses. Here, we employ the CTC model to the problem which has relevance to the field of fibre optics communications where each binary digit of transmitted information is encoded via the phase difference between the two adjacent solitons. Our goal is to elucidate different scenarios of the train distortions and the subsequent information garbling caused solely by the intersoliton interactions. First, we examine how the structure of a given phase pattern affects the initial stage of the train dynamics and explain the general mechanisms for the appearance of unstable collective soliton modes. Then we further discuss the nonlinear regime concentrating on the dependence of the Lax scattering matrix on the input phase distribution; this allows one to classify typical features of the train evolution and determine the distance where the soliton escapes from its slot. In both cases, we demonstrate deep mathematical analogies with the classical theory of crystal lattice dynamics.

Productivity change in the water industry in England and Wales:application of the meta-Malmquist Index

This paper uses a meta-Malmquist index for measuring productivity change of the water industry in England and Wales and compares this to the traditional Malmquist index. The meta-Malmquist index computes productivity change with reference to a meta-frontier, it is computationally simpler and it is circular. The analysis covers all 22 UK water companies in existence in 2007, using data over the period 1993–2007. We focus on operating expenditure in line with assessments in this field, which treat operating and capital expenditure as lacking substitutability. We find important improvements in productivity between 1993 and 2005, most of which were due to frontier shifts rather than catch up to the frontier by companies. After 2005, the productivity shows a declining trend. We further use the meta-Malmquist index to compare the productivities of companies at the same and at different points in time. This shows some interesting results relating to the productivity of each company relative to that of other companies over time, and also how the performance of each company relative to itself over 1993–2007 has evolved. The paper is grounded in the broad theory of methods for measuring productivity change, and more specifically on the use of circular Malmquist indices for that purpose. In this context, the contribution of the paper is methodological and applied. From the methodology perspective, the paper demonstrates the use of circular meta-Malmquist indices in a comparative context not only across companies but also within company across time. This type of within-company assessment using Malmquist indices has not been applied extensively and to the authors’ knowledge not to the UK water industry. From the application perspective, the paper throws light on the performance of UK water companies and assesses the potential impact of regulation on their performance. In this context, it updates the relevant literature using more recent data.

The vibrational spectra of rectangular plates

The wire drive pulse-echo system has been extensively used to excite and measure modes of vibration of thin rectangular plates. The frequency spectra of different modes have been investigated as a function of the material elastic moduli and the plate geometry. Most of the work was carried out on isotropic materials. For square plates a wide selection of materials were used. These were made isotropic in their in-plane dimensions where the displacements are taking place. The range of rnaterials enabled the dependence on Poisson's ratio to be investigated. A method of determining the value of Poisson's ratio resulted from this investigation. Certain modes are controlled principally by the shear modulus. Of these the fundamental has two nodal lines across the plate surface. One of them, which has nodes at the corners, (the Lame mode) is uniquely a pure shear mode where the diagonal is a full wave length. One controlled by the Young's modulus has been found. The precise harmonic relationship of the Lame mode series in square and rectangular plates was established. Use of the Rayleigh-Lamb equation has extended the theoretical support. The low order modes were followed over a wide range of sides ratios. Two fundamental types of modes have been recognised; These are the longitudinal modes where the frequency is controlled by the length of the plate only and the 2~f product has an asymptotic value approaching the rod velocity. The other type is the in-plane flexural modes (in effect a flexurally vibrating bar where the -2/w is the geometrical parameter). Where possible the experimental work was related to theory. Other modes controlled by the width dimension of the plate were followed. Anisotropic materials having rolled sheet elastic symmetry were investigated in terms of the appropriate theory. The work has been extended to examine materials from welds in steel plates.

On the robustness of random Boolean formulae

Random Boolean formulae, generated by a growth process of noisy logical gates are analyzed using the generating functional methodology of statistical physics. We study the type of functions generated for different input distributions, their robustness for a given level of gate error and its dependence on the formulae depth and complexity and the gates used. Bounds on their performance, derived in the information theory literature for specific gates, are straightforwardly retrieved, generalized and identified as the corresponding typical-case phase transitions. Results for error-rates, function-depth and sensitivity of the generated functions are obtained for various gate-type and noise models. © 2010 IOP Publishing Ltd.

Transformational-transactional leadership and upward influence:the role of Relative Leader-Member Exchanges (RLMX) and Perceived Organizational Support (POS)

By utilizing the resource theory of social exchange (Foa & Foa, 1974), we attempted to cast light on the dynamics of the relationship between transformational-transactional leadership and employees' upward influence tactics. Using data collected in two time points (N=200, 1. year apart), we found perceptions of transformational leadership (Time 1) to be positively related to the use of soft and rational upward influence tactics (Time 2) whereas transactional leadership (Time 1) was positively related to the use of soft and hard upward influence tactics (Time 2). We also found support for a 3-way interaction between transformational-transactional leadership, relative Leader Member Exchanges (RLMX) and Perceived Organizational Support (POS) on employees' upward influence tactics. Specifically, in resource-constrained conditions (low RLMX and low POS), employees were likely to use soft tactics to influence a manager they perceived as transformational to a greater extent than in resource-munificent conditions. They were also likely to employ higher levels of soft and hard tactics to influence a transactional manager in resource-constrained rather than in resource-munificent conditions. © 2012 Elsevier Inc.

The interaction between master production scheduling and detailed capacity requirements planning : closing the loop in manufacturing resource planning (MRPII) systems

The widespread implementation of Manufacturing Resource Planning (MRPII) systems in this country and abroad and the reported dissatisfaction with their use formed the initial basis of this piece of research which concentrates on the fundamental theory and design of the Closed Loop MRPII system itself. The dissertation concentrates on two key aspects namely; how Master Production Scheduling is carried out in differing business environments and how well the `closing of the loop' operates by checking the capcity requirements of the different levels of plans within an organisation. The main hypothesis which is tested is that in U.K. manufacturing industry, resource checks are either not being carried out satisfactorily or they are not being fed back to the appropriate plan in a timely fashion. The research methodology employed involved initial detailed investigations into Master Scheduling and capacity planning in eight diverse manufacturing companies. This was followed by a nationwide survey of users in 349 companies, a survey of all the major suppliers of Production Management software in the U.K. and an analysis of the facilities offered by current software packages. The main conclusion which is drawn is that the hypothesis is proved in the majority of companies in that only just over 50% of companies are attempting Resource and Capacity Planning and only 20% are successfully feeding back CRP information to `close the loop'. Various causative factors are put forward and remedies are suggested.

Studies of the effects of molecular encounters on N.M.R. spin-lattice relaxation times

This thesis is concerned with investigations of the effects of molecular encounters on nuclear magnetic resonance spin-lattice relaxation times, with particular reference to mesitylene in mixtures with cyclohexane and TMS. The purpose of the work was to establish the best theoretical description of T1 and assess whether a recently identified mechanism (buffeting), that influences n.m.r. chemical shifts, governs Tl also. A set of experimental conditions are presented that allow reliable measurements of Tl and the N. O. E. for 1H and 13C using both C. W. and F.T. n.m.r. spectroscopy. Literature data for benzene, cyclohexane and chlorobenzene diluted by CC14 and CS2 are used to show that the Hill theory affords the best estimation of their correlation times but appears to be mass dependent. Evaluation of the T1 of the mesitylene protons indicates that a combined Hill-Bloembergen-Purcell-Pound model gives an accurate estimation of T1; subsequently this was shown to be due to cancellation of errors in the calculated intra and intemolecular components. Three experimental methods for the separation of the intra and intermolecular relaxation times are described. The relaxation times of the 13C proton satellite of neat bezene, 1,4 dioxane and mesitylene were measured. Theoretical analyses of the data allow the calculation of Tl intra. Studies of intermolecular NOE's were found to afford a general method of separating observed T1's into their intra and intermolecular components. The aryl 1H and corresponding 13C T1 values and the NOE for the ring carbon of mesitylene in CC14 and C6H12-TMS have been used in combination to determine T1intra and T1inter. The Hill and B.P.P. models are shown to predict similarly inaccurate values for T1linter. A buffeting contribution to T1inter is proposed which when applied to the BPP model and to the Gutowsky-Woessner expression for T1inter gives an inaccuracy of 12% and 6% respectively with respect to theexperimentally based T1inter.

Development of a sediment yield model for South East Ghana in the regions around Lake Volta

Soil erosion is one of the most pressing issues facing developing countries. The need for soil erosion assessment is paramount as a successful and productive agricultural base is necessary for economic growth and stability. In Ghana, a country with an expanding population and high potential for economic growth, agriculture is an important resource; however, most of the crop production is restricted to low technology shifting cultivation agriculture. The high intensity seasonal rainfall coincides with the early growing period of many of the crops meaning that plots are very susceptible to erosion, especially on steep sided valleys in the region south of Lake Volta. This research investigated the processes of soil erosion by rainfall with the aim of producing a sediment yield model for a small semi-agricultural catchment in rural Ghana. Various types of modelling techniques were considered to discover those most applicable to the sub-tropical environment of Southern Ghana. Once an appropriate model had been developed and calibrated, the aim was to look at how to enable the scaling up of the model using sub-catchments to calculate sedimentation rates of Lake Volta. An experimental catchment was located in Ghana, south west of Lake Volta, where data on rainstorms and the associated streamflow, sediment loads and soil data (moisture content, classification and particle size distribution) was collected to calibrate the model. Additional data was obtained from the Soil Research Institute in Ghana to explore calibration of the Universal Soil Loss Equation (USLE, Wischmeier and Smith, 1978) for Ghanaian soils and environment. It was shown that the USLE could be successfully converted to provide meaningful soil loss estimates in the Ghanaian environment. However, due to experimental difficulties, the proposed theory and methodology of the sediment yield model could only be tested in principle. Future work may include validation of the model and subsequent scaling up to estimate sedimentation rates in Lake Volta.

The stability of pharmaceutical powders: effect of additives and coating

The decomposition of drugs in the solid state has been studied using aspirin and salsalate as models. The feasibility of using suspension systems for predicting the stability of these drugs in the solid state has been investigated.. It has been found that such systems are inappropriate in defining the effect of excipients on 'the decomposition of the active drug due to chqnges in the degradation pathway. Using a high performance liquid chromatographic method, magnesium stearate was shown to induce the formation of potentlally immunogenic products in aspirin powders. These products which included salicylsalicylic acid .and acetylsalicyclsalicylic acid were not detected in aspirin suspensions which had undergone the same extent of decomposition. By studying the effect of pH and of added excipients on the rate of decomposition of aspirin in suspension systems, it has been shown that excipients such as magnesium stearate containing magnesium oxide, most probably enhance the decomposition of both aspirin and salsalate by alkalinising the aqueous phase. In the solid state, pH effects produced by excipients appear to be relatively unimportant. Evidence is presented to suggest that the critical parameter is a depression in melting point induced by: the added excipient. Microscopical examination in fact showed the formation of clear liquid layers in aspirin samples containing added magnesium stearate but not in control samples. Kinetic equations which take into account both the diffusive barrier presented by the liquid films and the. geometry of the aspirin crystals were developed. Fitting of the .experimental data to these equations showed good agreement. with the postulated theory. Monitorjng of weight issues during the decomposition of aspirin revealed that in the solid systems studied where the bulk of the decomposition product sublimes, it is possible to estimate the extent of degradation from the residual weight, provided the initial weight is known. The corollary is that in such open systems, monitoring of decomposition products is inadequate for assessing the extent of decomposition. In addition to the magnesium stearate-aspirin system, mapyramine maleate-aspirin mixtures were used to model interactive systems. Work carried out in an attempt to stabilise such systems included microencapsulation and film coating. The protection obtained was dependent on the interactive species used. Gelatin for example appeared to stabilise aspirin against the adverse effects of magnesium stearate but increased its decomposition in the presence of mapyramine maleate.

Antecedents and consequences of the social categorization of expatriates in India

Multinational organizations have dramatically increased their operations in Asian countries in recent years. The success of expatriate assignments has therefore become increasingly important for multinationals. Social and cultural psychologists have proposed that host country nationals' (HCN) attitudes toward expatriates are key antecedents of interpersonally supportive behavior related to assignment success. We developed and tested a model of HCN social categorization and helping of expatriates based on the social–psychological theory. Results indicated that perceived values similarity and collectivism are negatively related to social categorization of expatriates, and that social categorization is negatively related to the provision of role information and social support by HCNs. Results are discussed in terms of their implications for theory and for organizations sending expatriates to culturally dissimilar host countries.

The Kinematics of interference mechanisms in certain machining operations

The mechanism of "Helical Interference" in milled slots is examined and a coherent theory for the geometry of such surfaces is presented. An examination of the relevant literature shows a fragmented approach to the problem owing to its normally destructive nature, so a complete analysis is developed for slots of constant lead, thus giving a united and exact theory for many different setting parameters and a range of cutter shapes. For the first time, a theory is developed to explain the "Interference Surface" generated in variable lead slots for cylindrical work and attention is drawn to other practical surfaces, such as cones, where variable leads are encountered. Although generally outside the scope of this work, an introductory analysis of these cases is considered in order to develop the cylindrical theory. Special emphasis is laid upon practical areas where the interference mechanism can be used constructively and its application as the rake face of a cutting tool is discussed. A theory of rake angle for such cutting tools is given for commonly used planes, and relative variations in calculated rake angle between planes is examined. Practical tests are conducted to validate both constant lead and variable lead theories and some design improvements to the conventional dividing head are suggested in order to manufacture variable lead workpieces, by use of a "superposed" rotation. A prototype machine is manufactured and its kinematic principle given for both linear and non-linearly varying superposed rotations. Practical workpieces of the former type are manufactured and compared with analytical predictions,while theoretical curves are generated for non-linear workpieces and then compared with those of linear geometry. Finally suggestions are made for the application of these principles to the manufacture of spiral bevel gears, using the "Interference Surface" along a cone as the tooth form.

The effects of solar radiation pressure on the motion of an artificial satellite

This thesis documents an investigation of the effect of solar radiation pressure on the motion of an artificial satellite. Consideration is given to the methods required for the inclusion of the discontinuous effect of the Earth's shadow. The analysis resulting from the description of a deformed diffusely reflecting balloon satellite and an algorithm describing the effects of Earth reflected solar radiation pressure are developed, culminating in the application of the derived theory to the orbital data of the balloon satellite, Explorer 19.

Kindness is the parent of kindness: reciprocity in the UK call centre workplace

This research developed, proposed and tested an integrated psychological process to performance model. The model utilized the overarching theory of social exchange to incorporate the climate perceptions and affective reactions of 3,012 employees across 88 UK call centres. In the pursuit of parsimony, a review of the applied psychology literature gave rise to a model where the path between global service climate and contextual performance was fully mediated by, first, perceived organizational support, second, job satisfaction and third, affective commitment. The resulting integrated and parsimonious model was tested via SEM and the mediation hypotheses were tested via a series of nested competing models. A moderate fit and partial, rather than full, mediation were reported. Nested Competing Model 4 proved to be the most parsimonious and to have the best fit. It is important to recognise, however, that Nested Competing Model 4 is not intended to be the most comprehensive model (which would include all significant paths), but a more practically useful one (i.e. parsimonious), that focuses on the main relationships.

Disentangle contextual and permanent individual motivations:an application to shopping behavior

Past studies resulted in conflicting definitions of consumer motivation. On the one hand, motivations are seen as the consumer’s characteristics that shape her general behavior (motivational trait). On the other hand, they are seen as contextual variables representing the reason why the individual is behaving specific to today’s context (motivational state). The objective of this research is to stress the difference between these two concepts and to understand the impact of each on consumer behavior. We applied our empirical study to shopping motivations; our results show a strong interaction between motivational trait and motivational state. Problem and Hypothesis On the one hand, Westbrook and Black (1985) consider shopping motivations as individual permanent characteristics. This concept is shared by other researchers (Rohm and Swaminathan 2004), which show that some shoppers are functional (they shop for convenience, information seeking, and time saving) while some others are hedonic (they shop for social interaction, bargain hunting and browsing). On the other hand, Kaltcheva and Weitz (2006) define motivations as a contextual orientation changing over time, depending on the situation, and show that contextual shopping motivations have a strong impact on shopping behavior. From our knowledge, no research specifically examined the respective impact of both these shopping motivation types. To deal with this issue, we used the notions of “traits” and “states” that have been largely used in marketing research to designate respectively a permanent characteristic of the individual and a temporary orientation of the consumer (Mowen 2000). The reversal theory (Apter 2001) suggests that two opposite states exist: the telic and the paratelic states. In the telic state, individuals set goals for themselves, must be disciplined to reach these goals, and do not behave in accordance with their personal trait. In the paratelic state, individuals are seeking arousal and enjoyment, do not set rules, and one could postulate that they act in accordance with their natural tendencies. Based on these considerations, we hypothesize the following process: in situations involving paratelic states, hedonic as well as functional individuals should behave according to their natural traits, whereas in situations involving telic states, hedonic people should inhibit their natural propensity to enjoy shopping and behave similarly to functional people. Hence, we postulate the following: Hypothesis: Compared to shoppers with functional motivational trait, shoppers with hedonic motivational trait will a) significantly display more hedonic shopping behavior intentions in a condition of paratelic motivational state, and b) not display more hedonic shopping behavior intentions in a condition a telic motivational state Empirical Research First, 108 participants were asked to fill a multi-items scale about their shopping habits, which actually measured their shopping motivational traits. This questionnaire allowed us to highlight four different dimensions in shopping motivational traits: social interaction, novelty/utility seeking, bargain hunting, and browsing. According to their scores on different items, participants were classified as functional or as hedonic on each of these four dimensions (a single individual may be hedonic on some dimensions and functional on others). Then, participants were then induced to adopt either a telic or a paratelic shopping motivational state while reading an appropriate scenario. Finally, participants were asked for their shopping behavior intentions in response to the shopping context. Four items were developed, corresponding to the four shopping motivational trait dimensions we found with our factor analysis. Results As we found four dimensions in shopping motivational trait, we set up four quasi-experimental designs to capture the entire phenomenon: for each dimension, a 2 (motivational trait) x 2 (motivational state) design was built, where the dependant variable was the shopping behavior element corresponding to the studied dimension. Four 2 x 2 Anovas were performed to assess the interaction between motivational trait and motivational state. Concerning the three dimensions - browsing, novelty/utility seeking, and bargain hunting- , in the paratelic state scenario participants with hedonic motivational trait displayed significantly more hedonic shopping behavior intentions than participants with a functional motivational trait (resp. F = 9.701, p = .003; F = 4.979, p = .03; F = 5.757, p = .02); and in the telic state scenario, there was no significant difference in behavior intentions between participants with hedonic or functional motivation trait. Each time, the interaction effect between motivational state and motivational trait was significant (resp. F = 4.859, p = .03; F = 3.314, p = .07; F = 2.98, p = .08). Concerning the fourth dimension, social interaction, shopping behavior intentions of participants with hedonic and with functional motivational traits were significantly different in the paratelic state scenario (F = 29.898, p <.000) as well as in the telic state scenario (F = 9.559, p = .003). However, the interaction effect showed that this behavioral difference was significantly stronger in the paratelic scenario. All these results support our research hypothesis. Discussion and Implications Our study provides consistent support for our hypotheses saying that there is an interaction effect between shopping motivational states and shopping motivational traits. The generalization of the results is strengthened by the study of four different shopping traits: social interaction, novelty/utility seeking, bargain hunting and browsing. As we proposed, when shopping in a goal-oriented state (telic state), behaviors of hedonic and functional shoppers do not differ significantly. Conversely, when shopping for a recreational reason (paratelic state), hedonic and functional shoppers behave significantly different. These results could explain why some previous studies concluded that shopping motivational traits had no impact on shopping behavior: they did not take into consideration the interaction between motivational trait and motivational state. Moreover, our study shows that marketing surveys performed by store managers to draw the personal profile of their customers must be crossed with contextual motivations in order to accurately forecast shopper behavior. Future Developments Our results can be explained by the self-control process, which pushes hedonic-trait shoppers to behave in a rather functional way in utilitarian situations. However, to be certain that this is the very process that occurs, we plan to add self-control perception scales to our existing measures. This is obviously the next step of this research.