O papel dos stakeholders na adoção de práticas de green supply chain management: estudo de caso em uma cadeia de suprimentos do setor de baterias automotivas

Pós-graduação em Engenharia de Produção - FEB

A comparative analysis of caries and fluorosis among cities with and without public water supply fluoridation in São Paulo State, Brazil

Purpose: This population-based, cross-sectional study aimed to record the DMFT index for 12 year-old children with dental caries and fluorosis levels in cities with and without public water supply fluoridation. Methods: From the 101 municipalities belonging to the Health Regional Department XV (DRSXV-SJRP) of the São Paulo state in the Southeast region of Brazil, 85 cities were selected after exclusion of those with incomplete data and less than ten years of fluoridation treatment in 2004. The criteria adopted for the assessment of dental caries and fluorosis levels were based on the guidelines published in the WHO Manual 4th edition. The data were analyzed using Fisher’s exact tests at a significance level of 5%. Results: The prevalence of caries in 12 year-old children had no significant association with fluoridated water, and was considered “moderate” and “high” in cities without fluoridation and “low” and “moderate” in cities with fluoridation. A significant association was found between water fluoridation and fluorosis (P=0.001), but not between water fluoridation and the DMFT index (P=0.119). Conclusion: The prevalence of fluorosis was related to water fluoridation in this study. However, fluorosis was also observed in non-fluoridated cities, which may result from fluoride intake through other sources.

Relationships between company size, types of production system and supply chain management: evidence from electro-electronics sector in Brazil

Purpose – The purpose of this paper is to investigate how company size and the type of production system affect the adoption of supply chain management (SCM) practices in companies in the electro‐electronics sector in Brazil. Design/methodology/approach – An e‐mail survey of 107 companies associated with the Brazilian Electrical and Electronics Industry Association (ABINEE) was conducted. Statistical techniques were employed to verify the adoption of SCM practices according to the size of the company and its production system. Findings – The major results indicate that the larger the size of the company, the higher the level of adoption of SCM practices, and that the choice of SCM practices depends upon the type of production system implemented. Practical implications – The implications of this study are useful to top management leaders of small and medium‐sized enterprises since the findings enable them to identify the most common practices adopted by either large‐, medium‐ or small‐sized companies in order to benchmark the level of adoption of SCM practices. Production managers can also benefit from this study by identifying the SCM practices that may support certain production systems.

Evidências da relação entre evolução da gestão ambiental e a adoção de práticas de Green Supply Chain Management no setor eletroeletrônico brasileiro

The objective of this research is to examine if the environmental management evolution is positively related towards the adoption of green supply chain management practices (GSCM) by companies in the electronics sector in Brazil. To reach this objective, a quantitative research was conducted by survey with 100 companies in the electronics sector in Brazil. The collected data were processed using descriptive statistics, Exploratory Factor Analysis and Structural Equation Modeling. The most important results are: in the sample, GSCM practices to the recovery of investment, as the resale of scrap and other waste materials, and the adequacy with legislation and auditing, obtained high scores; and research hypothesis (H1) was confirmed and considered statistically valid, indicating that, in fact, the evolution of environmental management influences the adoption of GSCM practices.

Supply chain strategies in the context of an ecommerce chain (E-Chain)

This paper purpose to explore the relationships between supply chain strategies and product performance in retail e-commerce. In this case, we concern that in current, in order to bear up under competition, organizations have to manage their supply chains so that they meet the needs of their final customers. With this concept in mind, the research presented in this study focuses on establishing the right strategy for supply chains according to their product segment. Thus, after a Literature Review, the paper explain a methodology based in different authors studies. Finally the article focuses on a pratical case in e-commerce retail that describes its application in this field. The research shows that it is possible to use a methodology for classifying supply chains using chain strategies and product features. The use of the right strategy for supply chains will improve the competitive advantage of businesses. One limitation is that the methodology study focuses on only two e-commerce segment; future studies may go further in refining the proposed framework for other segments. The aim of this research is to offer businesses a model for evaluating supply chains, allowing them to improve the performance of their products and services by using the right strategy for supply chains. The classification proposal of this paper presents an original model for classification of supply chains based on different studies on the theme.

On nonlinear dynamics behavior and control of a new model of a magnetically levitated vibrating system, excited by an unbalanced DC motor of limited power supply

We analyze new results on a magnetically levitated body (a block including a magnet whose bottom pole is set in such a way as to repel the upper pole of a magnetic base) excited by a non-ideal energy source (an unbalanced electric motor of limited power supply). These new results are related to the jump phenomena and increase of power required of such sources near resonance are manifestations of a non-ideal system and they are referred as the Sommerfeld effect, which emulates an energy sink. In this work, we also discuss control strategies to be applied to this system, in resonance conditions, in order to decrease its vibration amplitude and avoiding this apparent energy sink.

Extending lean manufacturing in supply chains: a successful case in Brazil

Purpose – The purpose of this paper is to present the results of a success story involving the extending of lean manufacturing practices between a focal firm and its supplier, both located in Brazil, thereby configuring a case of excellence. Design/methodology/approach – An in-depth case study was conducted involving two companies: Company A, focal, leader in its segment, located in Brazil; and Company B, Company A's supplier, also located in Brazil. Findings – Results indicate there are several mechanisms for extending lean manufacturing practices in the supply chain, such as workshops, training, and integrated teams. These mechanisms are shown and guidelines are also introduced for companies seeking to successfully extend lean manufacturing practices. Originality/value – An original use of define, measure, analyze, improve, control for structuring the extending of lean manufacturing practices to suppliers and, consequently, the importance of the lean six-sigma relationship in this context. Furthermore, the guidelines introduced serve as a benchmark for other companies interested in the topic.

Green supply chain management em uma indústria de bens do consumo do Vale do Paraíba - SP

The Green Supply Chain Management (GSCM) is gaining prominence in the academy and business, as an approach that aims to promote economic and environmental gains. The GSCM is operated through the Environmental Management System Tools and treated as an Environmental Management System (EMS), involving Reverse Logistics, Green Purchasing, Green Sourcing, Green Design, Green Packaging, Green Operation, Green Manufacturing, Green Innovation and Customer Awareness. The objective of this study is to map the GSCM tools and identify their practice in a consumer goods industry in the Vale do Paraiba. The approach and data collection were made in the company's database chosen as the object of study, as well as through on site visits and interviews. The results showed that the tools Green Operation, Green Manufacturing, Green Innovation and Green Sourcing are applied in the company and just Costumer Awareness tool showed no practice at all. To other tools was identified ideology or interest of the company in applying them

RB32-270 A Seven Year Study of a Milk Supply

The amount of butter produced by the grain-belt states is evidence that a great many cows are milked by the midwestern farmer. Most of this milk is separated on the farm, the cream is sold, and the skimmilk is fed to hogs and other livestock. As the market for fluid milk has developed, many farmers near the cities have turned to the sale of milk, because it affords a better return for the butterfat sold. Much of the milk produced for sale as fluid milk is produced under practically the same conditions as milk which is produced primarily for the same of cream. The Department of Dairy Husbandry of the University of Nebraska, in conducting its instructional and investigational work, comes in contact with the milk producer. An effort has been made, therefore, to study the relation of milk quality to farm conditions as found among the milk producers or patrons who have delivered milk to the department. The study was carried on in an effort to find possible ways of bettering the conditions without upsetting the economic balance existing between the production of cream and fluid milk.

RB30-245 Water Supply and Sewage Disposal Systems for Farm Homes

When the well "goes dry" or when the windmill or pump breaks down, every one in the household immediately appreciates the value fo plenty of water. In other words, "You never miss the water until the well runs dry." Fortunately, in most sections of this state, plenty of pure water may be obtained by sinking wells of moderate depth, yet surprisingly few farm homes are supplied with running water in the kitchen even though the barn yards are equipped with hydrants and tanks. It is the purpose of this bulletin to present a number of water supply and sewage disposal systems which have been used in Nebraska and surrounding states and which add greatly to the comfort and convenience of the farm home.

Hydrogeology, Chemical Characteristics, and Transport Processes in the Zone of Contribution of a Public-Supply Well in York, Nebraska

In 2001, the U.S. Geological Survey, as part of the National Water Quality Assessment (NAWQA) Program, initiated a topical study of Transport of Anthropogenic and Natural Contaminants (TANC) to PSW (public-supply wells). Local-scale and regional-scale TANC study areas were delineated within selected NAWQA study units for intensive study of processes effecting transport of contaminants to PSWs. This report describes results from a local-scale TANC study area at York, Nebraska, within the High Plains aquifer, including the hydrogeology and geochemistry of a 108-square-kilometer study area that contains the zone of contribution to a PSW selected for study (study PSW), and describes factors controlling the transport of selected anthropogenic and natural contaminants to PSWs.

Simulations of Ground-Water Flow, Transport, Age, and Particle Tracking near York, Nebraska, for a Study of Transport of Anthropogenic and Natural Contaminants (TANC) to Public-Supply Wells

The U.S. Geological Survey (USGS) is committed to providing the Nation with credible scientific information that helps to enhance and protect the overall quality of life and that facilitates effective management of water, biological, energy, and mineral resources (http://www.usgs.gov/). Information on the Nation’s water resources is critical to ensuring long-term availability of water that is safe for drinking and recreation and is suitable for industry, irrigation, and fish and wildlife. Population growth and increasing demands for water make the availability of that water, now measured in terms of quantity and quality, even more essential to the long-term sustainability of our communities and ecosystems. The USGS implemented the National Water-Quality Assessment (NAWQA) Program in 1991 to support national, regional, State, and local information needs and decisions related to water-quality management and policy (http://water.usgs.gov/nawqa). The NAWQA Program is designed to answer: What is the condition of our Nation’s streams and ground water? How are conditions changing over time? How do natural features and human activities affect the quality of streams and ground water, and where are those effects most pronounced? By combining information on water chemistry, physical characteristics, stream habitat, and aquatic life, the NAWQA Program aims to provide science-based insights for current and emerging water issues and priorities. From 1991-2001, the NAWQA Program completed interdisciplinary assessments and established a baseline understanding of water-quality conditions in 51 of the Nation’s river basins and aquifers, referred to as Study Units (http://water.usgs.gov/nawqa/studyu.html).

The Impact of Green Supply Chain Practices on Supply Chain Performance

Supply Chain Management (SCM) has become a critical factor to sustain organization’s competitive advantages. In this regard, many firms and researchers have attempted to find out factors that affect either positively or negatively on SCM. Recently, Green Supply Chain Management (GSCM) has been receiving the spotlight in many studies. Social and political concerns about the environment in Korea emerged in the early 1990s when Korean government established new environmental regulations in order to implement environmental management throughout the entire supply chain. The Korean government established national GSCM strategies. However, there has been minimal research on measuring GSCM performance among Korean enterprises. It is critical to conduct the research on the relationship between GSCM practices and supply chain performance among Korean firms. In this research, the relationship among Korean enterprises will be empirically tested. The supply chain performance measurement system includes three dimensions: resource, output, and flexibility.

Interplay of Late Cenozoic Siliciclastic Supply and Carbonate Response on the Southeast Florida Platform

High-resolution seismic-reflection data collected along the length of the Caloosahatchee River in southwestern Florida have been correlated to nannofossil biostratigraphy and strontium-isotope chemostratigraphy at six continuously cored boreholes. These data are interpreted to show a major Late Miocene(?) to Early Pliocene fluvial– deltaic depositional system that prograded southward across the carbonate Florida Platform, interrupting nearly continuous carbonate deposition since early in the Cretaceous. Connection of the platform top to a continental source of siliciclastics and significant paleotopography combined to focus accumulation of an immense supply of siliciclastics on the southeastern part of the Florida Platform. The remarkably thick (> 100 m), sand-rich depositional system, which is characterized by clinoformal progradation, filled in deep accommodation, while antecedent paleotopography directed deltaic progradation southward within the middle of the present-day Florida Peninsula. The deltaic depositional system may have prograded about 200 km southward to the middle and upper Florida Keys, where Late Miocene to Pliocene siliciclastics form the foundation of the Quaternary carbonate shelf and shelf margin of the Florida Keys. These far-traveled siliciclastic deposits filled accommodation on the southeastern part of the Florida Platform so that paleobathymetry was sufficiently shallow to allow Quaternary recovery of carbonate sedimentation in the area of southern peninsular Florida and the Florida Keys.

Green supply chain management em uma indústria de bens do consumo do Vale do Paraíba - SP

The Green Supply Chain Management (GSCM) is gaining prominence in the academy and business, as an approach that aims to promote economic and environmental gains. The GSCM is operated through the Environmental Management System Tools and treated as an Environmental Management System (EMS), involving Reverse Logistics, Green Purchasing, Green Sourcing, Green Design, Green Packaging, Green Operation, Green Manufacturing, Green Innovation and Customer Awareness. The objective of this study is to map the GSCM tools and identify their practice in a consumer goods industry in the Vale do Paraiba. The approach and data collection were made in the company's database chosen as the object of study, as well as through on site visits and interviews. The results showed that the tools Green Operation, Green Manufacturing, Green Innovation and Green Sourcing are applied in the company and just Costumer Awareness tool showed no practice at all. To other tools was identified ideology or interest of the company in applying them