Feasibility of the Reintroduction of Wolves in Maine: a GIS Study

The eastern timber wolf (Canis lupus lycaon) once inhabited Maine, as well as the rest of the eastern United States and southern Canada. As a result of human land use and widespread extermination campaigns, wolf numbers dramatically decreased, and by the early twentieth century, no wolves remained in Maine. As large carnivorous and territorial mammals, wolves require contiguous undeveloped areas with abundant prey. This project is a feasibility study that identifies the areas in Maine that are suitable for the reintroduction of wolves. We used GIS modeling to identify contiguous forested areas over 1,000 km2, calculate road and population density, and map the presence or absence of prey throughout the state. These variables were combined in a habitat suitability model to determine the location and amount of suitable wolf habitat in Maine. The northwestern part of the state appears most suitable for wolf reintroduction as it is relatively undeveloped with low road and population densities. There is also a smaller isolated area in Washington County that might be suitable, but further investigation is required.

On Real-Time Monitoring And Control For Efficient Management Of Drinking Water Networks: Barcelona Case Study

Drinking water utilities in urban areas are focused on finding smart solutions facing new challenges in their real-time operation because of limited water resources, intensive energy requirements, a growing population, a costly and ageing infrastructure, increasingly stringent regulations, and increased attention towards the environmental impact of water use. Such challenges force water managers to monitor and control not only water supply and distribution, but also consumer demand. This paper presents and discusses novel methodologies and procedures towards an integrated water resource management system based on advanced ICT technologies of automation and telecommunications for largely improving the efficiency of drinking water networks (DWN) in terms of water use, energy consumption, water loss minimization, and water quality guarantees. In particular, the paper addresses the first results of the European project EFFINET (FP7-ICT2011-8-318556) devoted to the monitoring and control of the DWN in Barcelona (Spain). Results are split in two levels according to different management objectives: (i) the monitoring level is concerned with all the aspects involved in the observation of the current state of a system and the detection/diagnosis of abnormal situations. It is achieved through sensors and communications technology, together with mathematical models; (ii) the control level is concerned with computing the best suitable and admissible control strategies for network actuators as to optimize a given set of operational goals related to the performance of the overall system. This level covers the network control (optimal management of water and energy) and the demand management (smart metering, efficient supply). The consideration of the Barcelona DWN as the case study will allow to prove the general applicability of the proposed integrated ICT solutions and their effectiveness in the management of DWN, with considerable savings of electricity costs and reduced water loss while ensuring the high European standards of water quality to citizens.

O project finance no financiamento de empreendimentos em saneamento básico no Brasil

A situação atual dos sistemas de saneamento básico no Brasil, bem como o quadro regulatório e institucional do setor, são o resultado de conturbados antecedentes e de políticas descontínuas, determinadas por aspectos conjunturais e pela alternância entre momentos de maior e menor disponibilidade de recursos. A privatização e a concessão de serviços oferece perspectivas concretas de redefinição da trajetória de evolução do setor, com o estabelecimento de um padrão mais constante e regular de crescimento dos índices de cobertura e de modernização dos sistemas e das técnicas de gestão. A lógica do investimento privado implica na orientação pelo lucro e na configuração de estruturas de menor risco para os recursos comprometidos com o empreendimento. O project finance é uma técnica de financiamento que permite a repartição de riscos entre os participantes, reduzindo parcelas individuais e, conseqüentemente, agregando maior atratividade ao negócio. O presente estudo terá por objetivo analisar o setor de saneamento básico e o project finance, buscando identificar as possibilidades e os impactos presumíveis da introdução e difusão da técnica como alternativa de financiamento para o setor no Brasil.

The human side of project management - an investigation of critical chain concepts in the Argentinean Project Environment

The global marketplace is rapidly intensifying. Longer product sales lives, greater profit margins or simply survival, is dependent on management¿s ability to create and lead change. Project Management has become an important competency, combined with other business practices to adapt to the trend of changing conditions. Critical Chain is a relatively new project methodology, elaborated by Eliyahu Goldratt in order to complete projects faster, make more efficient use of resources and securing the project deliverables. The methodology is based on the assumption that traditional project techniques such as CPM and PERT, do not recognize critical human behavior. The methodology claims that many project failures are a direct result of how safety is built into the task delivery times, and then wasted by human behavior such as Student Syndrome, Parkinson Law and Multitasking. However, there has been little or no previous research regarding this topic in the Argentine marketplace. This study intended to investigate to what extent the human behavior concepts of critical chain project management are present, by performing in-depth interviews with Argentine project stakeholders. It appears that the four human behavior concepts are present in Argentina and that the majority of Argentine companies are yet to apply project management techniques.

Estudos de caso : implantação de sistemas ERP - uma análise crítica à luz da metodologia de Project Management

Este documento constitui-se em uma dissertação de mestrado, requisito parcial para a obtenção do grau de Mestre em Gestão Empresaria e Pública. Este estudo procura mostrar que a adoção dessa nova tecnologia através de projetos de implantação de sistema de ERP não só mudam processos administrativos como também produtos, serviços e estruturas organizacionais e que a sua implantação se constitui em um grande projeto que envolve um número considerável de recursos e tempo das organizações. Este estudo procurar mostrar também que os impactos que tais projetos trazem, são mais fortemente sentidos ou não pela organização de acordo com uma série de fatores, entre eles, a resistência à mudança e o quanto a organização está preparada para enfrentar essas mudanças, o medo da perda do emprego pela adoção de uma nova tecnologia, problemas com a falta de comunicação das mudanças, questões relacionadas à cultura organizacional vigente, a falta de envolvimento da alta administração, entre outras. Para gerenciar todas essas variáveis, as organizações modernas adotam técnicas para garantir o sucesso da implantação dessas novas tecnologias. o estudo aqui proposto tem como objetivo determinar até que ponto a utilização de metodologias e de técnicas de Project Management é o suficiente para que esses projetos alcancem o sucesso esperado pelas organizações. A quantidade de variáveis que influenciam o resultado de um projeto são muitas e cada uma delas possui um papel importante que deve ser avaliado. As conclusões desta pesquisa demonstram que o sucesso de um projeto nem sempre se resume a atingir os objetivos inicialmente propostos, relativos ao cumprimento do prazo, escopo e custo de um projeto, conforme define a metodologia de Project Management. Outros aspectos considerados por essa metodologia, se melhor ou pior aplicados, também contribuem para o sucesso ou fracasso de um projeto de implantação de um sistema de ERP sendo o seu fracasso traduzido ou não, no cumprimento do prazo, do escopo inicialmente previsto ou no custo inicialmente calculado. Outros aspectos que não apenas a aplicação correta da metodologia de Project Management contribuem para os resultados alcançados pelo projeto.

Study of the innovation management process in the development of a discontinuous product case: Motorola RAZR V3

This study will collaborate by bringing some detailed analysis and findings on a special case study of a discontinuous product development process, trying to answer how the discontinuous product development process takes place and the main factors that influence this process. Additionally, it tried to explore some explanations for the difficulties generally faced by the companies to sustain innovation. The case is about the Motorola cell phone RAZR V3, launched in 2004. RAZR V3 was noted by industry experts as game-changing feat of design and engineering, selling more than 110 million units by end of 2008 and recognized as one of the fastest selling products in the industry. The study uses a single case methodology, which is appropriate given the access to a phenomenon that happened inside corporate dominium and it is not easily accessed for academic studies, besides being a rare case of success in the cellular phone industry. In order to magnify the understanding of the phenomenon, the exploration was extended to contrast the RAZR development process and the standard product development process in Motorola. Additionally, it was integrated a longitudinal reflection of the company product development evolution until the next breakthrough product hitting the cellular phone industry. The result of the analysis shows that discontinuous products do not fit well traditional product development process (in this case, stage-gate). This result reinforces the results obtained on previous studies of discontinuous product development conducted by other authors. Therefore, it is clear that the dynamics of discontinuous product development are different from the continuous product development, requiring different treatment to succeed. Moreover, this study highlighted the importance of the management influence in all the phases of the process as one of the most important factors, suggesting a key component to be carefully observed in future researches. Some other findings of the study that were considered very important for a discontinuous product development process: have champions (who believe and protect the project) and not only one champion; create a right atmosphere to make flow the creative process; question paradigms to create discontinuous products; simple guiding light to focus the team; company culture that accepts and knows how to deal with risks; and undoubtedly, have a company strategy that understands the different dynamics of continuous and discontinuous product development processes and treat them accordingly.

Project portfolio management: an analysis from the insurance industry IT area

This paper aims to bring more information related to the critical question "how IT areas of insurance companies are defining and delivering their strategic initiatives Portfolios?" and make conclusions based on the collected data. To reach these interpretations, it is composed of a theoretical investigation on the theme, a strategy delineation for the research methodology and a conclusion presentation based on the findings. In this last part, this study concluded that explored organization does not applied a sufficient number of best practices answering the critical question as "the company is not mature on this subject".

Motivation of german entrepreneurs to seek equity via crowdfunding: an exploratory study

Equity crowdfunding, ou financiamento de um projeto ou empreendimento através de diversos pequenos investimentos ou um grande grupo de investidores, tem recebido uma crescente atenção da mídia e acadêmicos. A discussão questiona se crowdfunding pode de uma forma geral transformar a maneira como as pessoas captam capital para os seus negócios. Enquanto que pesquisas tem até então focado em explorar porque crowdinvestors têm motivação em financiar empreitadas, este estudo foca em revelar o que motiva empreendedores a procurar soluções de crowdfund. Para isso, o estudo investigou a motivação de 11 empreendedores que usaram plataformas alemãs de crowdfunding. Como estudos existentes sobre a motivação de empreendedores são na sua grande maioria superficiais, este estudo utiliza uma nova abordagem de pesquisa na área de financiamento de projetos, a abordagem de means-end. Sob essa abordagem a forma de pensar dos empreendedores em relação ao uso de equity crowdfunding foi estudada de forma holística, revelando todo o processo de raciocínio até a decisão final de optar por uma estratégia de crowdfunding. Uma das descobertas é que empreendedores usam equity crowdfunding para arrecadar fundos de crowdinvestors consideravelmente não-racionais (emocionais) para financiar o crescimento futuro de seus negócios e também sinalizar viabilidade de investimento para futuros investidores. Além disso, empreendedores esperam que crowdinvestors sejam engajados e ajudem tanto a promover o negócio como a dar feedback. Crowdfunding também possibilita que empreendedores mantenham o poder de decisão sobre a empresa mais facilmente se comparado a outras fontes tradicionais de financiamento. As descobertas indicam que crowdfunding atrai empreendedores que não conseguiriam arrecadar investimentos a partir de outras fontes de capital assim como empreendedores que entendem os benefícios adicionais que esta oferece em relação à outras fontes.

Legal enforcement, collateral and heterogeneity of project financing contracts

This paper employs mechanism design to study the effects of imperfect legal enforcement on optimal scale of projects, borrowing interest rates and the probability of default. The analysis departs from an environment that combines asymmetric information about cash flows and limited commitment by borrowers. Incentive for repayment comes from the possibility of liquidation of projects by a court, but courts are costly and may fail to liquidate. The value of liquidated assets can be used as collateral: it is transferred to the lender when courts liquidate. Examples reveal that costly use of courts may be optimal, which contrasts with results from most limited commitment models, where punishments are just threats, never applied in optimal arrangements. I show that when voluntary liquidation is allowed, both asymmetric information and uncertainty about courts are necessary conditions for legal punishments ever to be applied. Numerical solutions for several parametric specifications are presented, allowing for heterogeneity on initial wealth and variability of project returns. In all such solutions, wealthier individuals borrow with lower interest rates and run higher scale enterprises, which is consistent with stylized facts. The reliability of courts has a consistently positive effect on the scale of projects. However its effect on interest rates is subtler and depends essentially on the degree of curvature of the production function. Numerical results also show that the possibility of collateral seizing allows comovements of the interest rates and the probability of repayment.

Effectiveness of high-throughput miniaturized sorbent- and solid phase microextraction techniques combined with gas chromatography–mass spectrometry analysis for a rapid screening of volatile and semi-volatile composition of wines: a comparative study

In this study the feasibility of different extraction procedures was evaluated in order to test their potential for the extraction of the volatile (VOCs) and semi-volatile constituents (SVOCs) from wines. In this sense, and before they could be analysed by gas chromatography–quadrupole first stage masss spectrometry (GC–qMS), three different high-throughput miniaturized (ad)sorptive extraction techniques, based on solid phase extraction (SPE), microextraction by packed sorbents (MEPS) and solid phase microextraction (SPME), were studied for the first time together, for the extraction step. To achieve the most complete volatile and semi-volatile signature, distinct SPE (LiChrolut EN, Poropak Q, Styrene-Divinylbenzene and Amberlite XAD-2) and MEPS (C2, C8, C18, Silica and M1 (mixed C8-SCX)) sorbent materials, and different SPME fibre coatings (PA, PDMS, PEG, DVB/CAR/PDMS, PDMS/DVB, and CAR/PDMS), were tested and compared. All the extraction techniques were followed by GC–qMS analysis, which allowed the identification of up to 103 VOCs and SVOCs, distributed by distinct chemical families: higher alcohols, esters, fatty acids, carbonyl compounds and furan compounds. Mass spectra, standard compounds and retention index were used for identification purposes. SPE technique, using LiChrolut EN as sorbent (SPELiChrolut EN), was the most efficient method allowing for the identification of 78 VOCs and SVOCs, 63 and 19 more than MEPS and SPME techniques, respectively. In MEPS technique the best results in terms of number of extractable/identified compounds and total peak areas of volatile and semi-volatile fraction, were obtained by using C8 resin whereas DVB/CAR/PDMS was revealed the most efficient SPME coating to extract VOCs and SVOCs from Bual wine. Diethyl malate (18.8 ± 3.2%) was the main component found in wine SPELiChrolut EN extracts followed by ethyl succinate (13.5 ± 5.3%), 3-methyl-1-butanol (13.2 ± 1.7%), and 2-phenylethanol (11.2 ± 9.9%), while in SPMEDVB/CAR/PDMS technique 3-methyl-1-butanol (43.3 ± 0.6%) followed by diethyl succinate (18.9 ± 1.6%), and 2-furfural (10.4 ± 0.4%), are the major compounds. The major VOCs and SVOCs isolated by MEPSC8 were 3-methyl-1-butanol (26.8 ± 0.6%, from wine total volatile fraction), diethyl succinate (24.9 ± 0.8%), and diethyl malate (16.3 ± 0.9%). Regardless of the extraction technique, the highest extraction efficiency corresponds to esters and higher alcohols and the lowest to fatty acids. Despite some drawbacks associated with the SPE procedure such as the use of organic solvents, the time-consuming and tedious sampling procedure, it was observed that SPELiChrolut EN, revealed to be the most effective technique allowing the extraction of a higher number of compounds (78) rather than the other extraction techniques studied.

Xylella fastidiosa: An in vivo system to study possible survival strategies within citrus xylem vessels based on global gene expression analysis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The HUman MicroNucleus project on eXfoLiated buccal cells (HUMNXL): The role of life-style, host factors, occupational exposures, health status, and assay protocol

The human buccal micronucleus cytome assay (BMCyt) is one of the most widely used techniques to measure genetic damage in human population studies. Reducing protocol variability, assessing the role of confounders, and estimating a range of reference values are research priorities that will be addressed by the HUMNXL, collaborative study. The HUMNXL, project evaluates the impact of host factors, occupation, life-style, disease status, and protocol features on the occurrence of MN in exfoliated buccal cells. In addition, the study will provide a range of reference values for all cytome endpoints. A database of 5424 subjects with buccal MN values obtained from 30 laboratories worldwide was compiled and analyzed to investigate the influence of several conditions affecting MN frequency. Random effects models were mostly used to investigate MN predictors. The estimated spontaneous MN frequency was 0.74 parts per thousand (95% CI 0.52-1.05). Only staining among technical features influenced MN frequency, with an abnormal increase for non-DNA-specific stains. No effect of gender was evident, while the trend for age was highly significant (p < 0.001). Most occupational exposures and a diagnosis of cancer significantly increased MN and other endpoints frequencies. MN frequency increased in heavy smoking (>= 40 cig/day. FR = 1.37:95% CI 1.03-.82) and decreased with daily fruit consumption (FR = 0.68; 95% CI 0.50-0.91). The results of the HUMNXL, project identified priorities for validation studies, increased the basic knowledge of the assay, and contributed to the creation of a laboratory network which in perspective may allow the evaluation of disease risk associated with MN frequency. (C) 2011 Elsevier B.V. All rights reserved.

Morphological study of the hindgut in larvae of Anticarsia gemmatalis Hübner(Lepidoptera: Noctuidae)

A lagarta da soja (Anticarsia gemmatalis Hübner) tem grande interesse econômico, pois afeta significativamente a cultura da soja em todo o mundo. Este trabalho descreve a morfologia do intestino posterior de larvas de A. gemmatalis, com ênfase nos seus aspectos histológicos. O intestino posterior é constituído por regiões morfologicamente distintas, identificadas como piloro, íleo, cólon e reto. Independente da região, a parede do intestino posterior é constituída por fina cutícula, epitélio simples e camada muscular. A íntima cuticular apresenta espículas no anel intersticial posterior, entre o intestino médio e o posterior, e na região posterior do piloro. A musculatura do reto é formada por camada única de largas fibras circulares, diferindo das demais regiões do intestino posterior que apresentam duas camadas de fibras musculares. As extremidades distais dos túbulos de Malpighi atravessam as paredes do reto, constituindo o sistema criptonefridial característico de Lepidoptera.

Optical modeling of aspherical lenses: a human eye study

We have been developing a computational code to project optical lenses, with low aberration effects. Our main interest is model the human eye, particularly, project special corrective lenses. As the lens shape is the focus of the optimization, we have coupled a ray tracing method with Monte Carlo techniques. The initial results indicated that the algorithm must be improved in terms of resolution and reliability.

DBMODELING - A database applied to the study of protein targets from genome projects

Genome sequencing efforts are providing us with complete genetic blueprints for hundreds of organisms. We are now faced with assigning, understanding, and modifying the functions of proteins encoded by these genomes. DBMODELING is a relational database of annotated comparative protein structure models and their metabolic pathway characterization, when identified. This procedure was applied to complete genomes such as Mycobacteritum tuberculosis and Xylella fastidiosa. The main interest in the study of metabolic pathways is that some of these pathways are not present in humans, which makes them selective targets for drug design, decreasing the impact of drugs in humans. In the database, there are currently 1116 proteins from two genomes. It can be accessed by any researcher at http://www.biocristalografia.df.ibilce.unesp.br/tools/. This project confirms that homology modeling is a useful tool in structural bioinformatics and that it can be very valuable in annotating genome sequence information, contributing to structural and functional genomics, and analyzing protein-ligand docking.