Levantamentos epidemiológicos em saúde bucal: análise da metodologia proposta pela Organização Mundial da Saúde

Epidemiological surveys are important for obtaining information on the prevalence and etiology of mouth diseases, since the data collected permit health actions to be planned, performed, and assessed. Methodological uniformity is necessary, however, to maintain reproductibility, validity, and reliability, and to allow national and international comparisons. The initiative of the World Health Organization (WHO) as an advisor in ongoing surveys has been extremely useful, stimulating standardization in all countries. In 1991, a Portuguese version of the 1987 third edition of Oral Health Surveys - basic methods, an instruction manual for performing epidemiological surveys, was published and became a reference for many parts of Brazil and the World. The present analysis found conflicting points in relation to the sample size, calibration of the examiners, and criteria for evaluating oral health and treatment needs. In conclusion, due to the dynamic characteristics of scientific knowledge and, considering the regional differences in relation to the development of oral diseases, we recommend that proposals for standardizing surveys be checked periodically. Other important issues may have not been detected in this analysis, urging a thorough discussion within the dentistry community as a whole.

Construção e validação do instrumento de investigação do conhecimento de gestantes sobre sua saúde bucal e a do seu bebê: perspectiva do cuidado em saúde

INTRODUCTION: Humanized and quality prenatal and post-partum care is critical to maternal and newborn health, as well as oral health care. Currently, the National Oral Health Policy is aiming at expanding dental care for pregnant women. Thus, the promotion of oral health and attention to prenatal care policies should be integrated; however, there is still limited participation of pregnant women. Thus, it is necessary to verify the knowledge of pregnant women related to oral health, seeking to estimate the quality of dental care provided during prenatal care, being essential for the Family Health strategy to organize personnel, plan costs and to ensure the quality standard of care. OBJECTIVE: To develop and validate a research instrument on the knowledge of pregnant women about their oral health and of their baby. METHOD: This is a construction and validation study with 93 pregnant women in Family Health Units and specialized private clinics in Obstetrics, in the city of Natal / RN. It was authorized by the Onofre Lopes University Hospital Ethics Committee of the Universidade Federal do Rio Grande do Norte (UFRN) under the registration number 421.163/13. The construction of the instrument followed steps so that it was valid, reliable and sensitive: creation and reduction of the items (drafting of the instrument), content validity and testing of the instrument, and hypotheses validation. Once constructed, the instrument was evaluated by experts who suggested modifications. There was consultation with the target population about the new version of the created instrument, which had the instrument validation verified by internal consistency through intra and inter-calibration and test-retest. Next, the hypotheses were validated. A database was built in the Statistical Package for Social Sciences (SPSS), version 22.0. After creating the hypotheses, an association was found for validating the criteria between each of the specific issues for each established criteria, considering a 5% significance level. Data analysis was carried out by describing the absolute and relative frequencies of the variables pertaining to issues relating to their pregnancy knowledge about their oral health and their baby. The Kappa coefficient was used for the calibration process (Inter and Intra-examiner calibration) and Cronbach's alpha coefficient was used to analyze instrument reproducibility (test-retest). In addition, the chi-square test was used to cross the dependent variable with the (dichotomized) independent variables. RESULTS: The intra and inter agreement analysis presented a Kappa coefficient between 0.400 and 1.000. Internal consistency through the analysis showed that 90% of the instrument's questions showed great reliability in the answers (Cronbach α ˃ 0.7). In the investigation of the relationship between the dependent variable (knowledge about oral health) and the independent variables (trimester of pregnancy, education, income and multiparous), it was found that none of these independent variables were significantly associated. All hypotheses had their Ho confirmed. CONCLUSION: The constructed instrument was validated, considering that it showed to be sensitive with good reliability and good accuracy, and therefore can be used to assess pregnant women’s knowledge about their oral health and the oral health of their baby.

Construção e validação do instrumento de investigação do conhecimento de gestantes sobre sua saúde bucal e a do seu bebê: perspectiva do cuidado em saúde

INTRODUCTION: Humanized and quality prenatal and post-partum care is critical to maternal and newborn health, as well as oral health care. Currently, the National Oral Health Policy is aiming at expanding dental care for pregnant women. Thus, the promotion of oral health and attention to prenatal care policies should be integrated; however, there is still limited participation of pregnant women. Thus, it is necessary to verify the knowledge of pregnant women related to oral health, seeking to estimate the quality of dental care provided during prenatal care, being essential for the Family Health strategy to organize personnel, plan costs and to ensure the quality standard of care. OBJECTIVE: To develop and validate a research instrument on the knowledge of pregnant women about their oral health and of their baby. METHOD: This is a construction and validation study with 93 pregnant women in Family Health Units and specialized private clinics in Obstetrics, in the city of Natal / RN. It was authorized by the Onofre Lopes University Hospital Ethics Committee of the Universidade Federal do Rio Grande do Norte (UFRN) under the registration number 421.163/13. The construction of the instrument followed steps so that it was valid, reliable and sensitive: creation and reduction of the items (drafting of the instrument), content validity and testing of the instrument, and hypotheses validation. Once constructed, the instrument was evaluated by experts who suggested modifications. There was consultation with the target population about the new version of the created instrument, which had the instrument validation verified by internal consistency through intra and inter-calibration and test-retest. Next, the hypotheses were validated. A database was built in the Statistical Package for Social Sciences (SPSS), version 22.0. After creating the hypotheses, an association was found for validating the criteria between each of the specific issues for each established criteria, considering a 5% significance level. Data analysis was carried out by describing the absolute and relative frequencies of the variables pertaining to issues relating to their pregnancy knowledge about their oral health and their baby. The Kappa coefficient was used for the calibration process (Inter and Intra-examiner calibration) and Cronbach's alpha coefficient was used to analyze instrument reproducibility (test-retest). In addition, the chi-square test was used to cross the dependent variable with the (dichotomized) independent variables. RESULTS: The intra and inter agreement analysis presented a Kappa coefficient between 0.400 and 1.000. Internal consistency through the analysis showed that 90% of the instrument's questions showed great reliability in the answers (Cronbach α ˃ 0.7). In the investigation of the relationship between the dependent variable (knowledge about oral health) and the independent variables (trimester of pregnancy, education, income and multiparous), it was found that none of these independent variables were significantly associated. All hypotheses had their Ho confirmed. CONCLUSION: The constructed instrument was validated, considering that it showed to be sensitive with good reliability and good accuracy, and therefore can be used to assess pregnant women’s knowledge about their oral health and the oral health of their baby.

Avaliação imunoistoquímica de CD34 e triptase em cistos odontogênicos radiculares e cistos dentígeros inflamados

Conselho Nacional de Desenvolvimento Científico e Tecnológico - CNPq

Avaliação imunoistoquímica de CD34 e triptase em cistos odontogênicos radiculares e cistos dentígeros inflamados

Conselho Nacional de Desenvolvimento Científico e Tecnológico - CNPq

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Educação ambiental como estratégia para inserção da sustentabilidade na formação em odontologia

This thesis proposes environmental education as a strategy for the inclusion of sustainability in the academic education of higher level. The dentistry course has been the object of study, which is justified by the recognition of the need for reflection on environmental issues in the dental academia, initially based on professional experience of the author as a dental surgeon. The aim of this study is to investigate the scientific production of dentistry and its content related to environmental issues, in addition to expanding discussions and reflections on the need to insert environmental education as academic content. With the specific purpose of verifying the amount and analyze the content of scientific articles involving issues related to sustainability in dentistry, Chapter 01 presents research in leading journals portals available on the internet. Works were surveyed where sustainability and related issues were present and placed in a theoretical framework that analyzes the dental service inclusion in the dominant economic model. These procedures are intended to prove the hypothesis that the dental profession does not produce significant scientific content that relates the profession to the environment and sustainability. A literature review was conducted with the statement of dentistry changes from its origins to the front position to the dominant development model and exemplification of the deleterious effects of this model on the environment. In addition, there was a scientific research in journals portals available on the internet and investigated the amount and content of scientific articles involving issues related to sustainability in dentistry. Chapter 02 has the specific purpose of providing content to expand discussions and reflections on the need to insert environmental education in undergraduate courses in dentistry, such as insertion strategy into a new development model guided by sustainability. In this, students questionnaires were given the 8th dentistry course of the period the Federal University of Rio Grande do Norte (UFRN), to be understood environmental perception of learners and were obtained grants for proof of the thesis that environmental education applied dentistry has the potential to make people aware and willing to act practicing and propagating sustainability in their conduct. The overall results indicate little scientific production, as the research and work that relates to dentistry to sustainability and the issues related to the environment have not significantly been present in the syllabus of the undergraduate courses in dentistry, despite the interest shown by survey respondents When such issues are addressed. In this context, it is proposed fostering actions to environmental education, so that dental professionals are engaged in the construction of a new development model based on sustainability, as despite the environmental theme seems to be little explored in the academic and scientific world of dentistry, there interest from students and great potential multiplier for appropriate environmental behavior. After proving the hypothesis that the environment-related content are poorly explored in the academic and scientific world of dentistry, the main conclusions were recognizing the importance of environmental education as an interdisciplinary tool for environmental thematic approach in undergraduate courses dentistry, in addition to implementing this new pedagogical proposal in the professional practice of dentists, given their potential multiplier for environmental knowledge.

Avaliação da adaptação marginal de diferentes tipos de restaurações obtidas por CAD/CAM e métodos convencionais

The past few decades have brought many changes to the dental practice and the technology has become ready available. The result of a satisfactory rehabilitation treatment basically depends on the balance between biological and mechanical factors. The marginal adaptation of crowns and prosthetic structures is vital factor for long-term success. The development of CAD / CAM technology in the manufacture of dental prostheses revolutionized dentistry, this technology is capable of generating a virtual model from the direct digital scanning from the mouth, casts or impressions. It allows the planning and design of the structure in a computered software. The virtual projects are obtained with high precision and a significant reduction in clinical and laboratory time. Thus, the present study (Chapters 1, 2 and 3) computed microtomography was used to evaluate, different materials, different CAD/CAM systems, different ways of obtaining virtual model (with direct or indirect scanning), and in addition, also aims to evaluate the influence of cementing agent in the final adaptation of crowns and copings obtained by CAD / CAM. Furthermore, this study (Chapter 4, 5 and 6) also aims to evaluate significant differences in vertical and horizontal misfits in abutment-free frameworks on external hexagon implants (HE) using full castable UCLAs, castable UCLAs with cobalt-chromium pre-machined bases and obtained by CAD / CAM with CoCr or Zirconia by different scanning and milling systems. For this, the scanning electron microscopy and interferometry were used. It was concluded that the CAD / CAM technology is capable to produce restorations, copings and screw-retained implant-supported frameworks in different materials and systems offering satisfactory results of marginal accuracy, with significative reduction in clinical and laboratory time.

Metal transfer mapping for FCAW process by using near-infrared filming

In the Flux Cored Arc Welding (FCAW) process, the transfer of filler metal (metal transfer modes) to the base material to accomplish the weld bead determines the weld quality and therefore studies of such phenomena is demanded. Thus, in this work, the metal transfer through the FCAW process is investigated by filming the phenomena with the assist of near infrared visualization. During the literature survey, it was found that this technic has not been used so far for analyzing the FCAW process. It must be pointed out that the radiation emitted from the weld arc, fumes and particles (spattering) in this process represent a barrier for these studies based in the process visualization. The monitoring of metal transfer for FCAW process was carried out within the operational envelope of voltage and wire feed speed with the electrode E71T-1 (1.2 mm diameter) and Ar+25%CO2 as a shielding gas. A local developed near infrared filming with frame rate of 300 Hz was employed for metal transfer visualization in order to contribute to a better understanding of this process and evaluating characteristics of metal transfer, unlike previous studies, which used shadowgraph technique. It can clearly be seen how the droplet is created and transferred in this process and also identify the different modes of metal transfer by changing the parameters of voltage and wire feed speed in metal transfer maps. The final result of this study is the metal transfer mode maps, which establish suitable conditions and provide the basis for developing arc control strategies for the FCAW process.

Apicectomías de dientes premolares y molares mandibulares en el conejo de raza neo zelandesa: estudio histológico usando distintos materiales de obturación apical

La apicectomía es una técnica de cirugía odontológica humana y veterinaria, que consiste en la amputación o resección de la porción más apical de la raíz dentaria y la retrobturación del ápice con algún material, con el objetivo de conservar el diente afectado de alguna patología apical. Se han usado gran variedad de materiales para la obturación, como amalgama, gutapercha, ionómero de vidrio, composite, MTA e hidróxido de calcio. En este estudio pretendemos comprobar la viabilidad de la técnica de la realización de la apicectomías en premolares y molares mandibulares, usando distintos materiales de retrobturación como son el iónomero de vidrio Ketac Cem μ® y el composite Tetric EvoFlow® en el conejo de experimentación de raza Neozelandesa. Realizamos las apicectomías de los dientes 407, 408 y 409 (3º premolar, 4º premolar y 1º molar inferior derecho), en una sola fase a diez animales. En el primer diente (407) solo se aplica un sellado del diente apicectomizado con hidróxido de calcio en polvo® y pasta Dycal® Dentin y no se coloca ningún material de obturación. En el segundo diente (408), se aplica un sellado con hidróxido de calcio en polvo® y pasta Dycal® Dentin y encima una retrobturación con ionómero de vidrio Ketac Cem μ® y en el tercer diente (409), se aplica un sellado con hidróxido de calcio en polvo® y pasta Dycal® Dentin y encima una retroturación con el composite Tetric EvoFlow®. A las 4 y 8 semanas se sacrificaron los animales y se realizó la toma de muestras. Estas fueron radiografiadas y posteriormente se realizaron cortes histológicos de los dientes apicectomizados y del tejido alrededor. Los cortes fueron teñidos con la tinción Levai-Laczkó y se realizó el estudio histológico cuantitativo y semicuantitativo, según la norma UNE-EN ISO 10993-6:2007, para medir la presencia de inflamación, fibrosis, infiltrados adiposos y cierre óseo del defecto...

Impacto da Estratégia Saúde da Família com equipe de saúde bucal sobre a utilização de serviços odontológicos

PEREIRA, C. R. S. et al. Impacto da estratégia saúde da família com equipe de saúde bucal sobre a utilização de serviços odontológicos. Cad. Saúde Pública, v. 25, n. 5, p.985-996. Maio, 2009. ISSN 0102-311X.

Impacto da Estratégia Saúde da Família com equipe de saúde bucal sobre a utilização de serviços odontológicos

PEREIRA, Carmen Regina dos Santos et al. Impacto da Estratégia Saúde da Família com equipe de saúde bucal sobre a utilização de serviços odontológicos. Cadernos de Saúde Pública, Rio de Janeiro, v. 25, n. 5, p. 985-996, maio 2009.

Prevalence and severity of dental fluorosis among students from João Pessoa, PB, Brazil

The aim of this study was to determine the prevalence and severity of dental fluorosis among 12-15-year-old students from João Pessoa, PB, Brazil before starting a program of artificial fluoridation of drinking water. The use of fluoridated dentifrice was also surveyed. A sample of 1,402 students was randomly selected. However, 31 students refused to participate and 257 were not permanent residents in João Pessoa, thus leaving a final sample of 1,114 students. Clinical exams were carried out by two calibrated dentists (Kappa = 0.78) under natural indirect light. Upper and lower front teeth were cleaned with gauze and dried, and then examined using the TF index for fluorosis. A questionnaire on dentifrice ingestion and oral hygiene habits was applied to the students. The results revealed that fluorosis prevalence in this age group was higher than expected (29.2%). Most fluorosis cases were TF = 1 (66.8%), and the most severe cases were TF = 4 (2.2%). The majority of the students reported that they had been using fluoridated dentifrices since childhood; 95% of the participants preferred brands with a 1,500 ppm F concentration, and 40% remembered that they usually ingested or still ingest dentifrice during brushing. It was concluded that dental fluorosis prevalence among students in João Pessoa is higher than expected for an area with non-fluoridated water. However, although most students use fluoridated dentifrices, and almost half ingest slurry while brushing, the majority of cases had little aesthetic relevance from the professionals' point of view, thus suggesting that fluorosis is not a public health problem in the locality.