Characterization of a new coagulase-negative Staphylococcus species (Staphylococcus pettenkoferi) isolated from blood cultures from a hospitalized patient in Porto Alegre, Brazil

INTRODUCTION: Staphylococcus pettenkoferi was originally isolated and described by Trülzsch et al (2002). In this study, we characterized two isolates of this newly described species. METHODS: Blood cultures were initially processed using the BacT/ALERT® device, and the isolates were initially characterized using the Vitek2 identification system. RESULTS: The initial characterization revealed slow-growing Gram-positive cocci that formed opaque colonies on sheep blood agar. Other phenotypic/genotypic tests were performed. CONCLUSIONS: We would like to emphasize that this new staphylococcus species is phenotypically similar to other CoNS, especially S. auricularis. This could potentially lead to misidentification of these uncommon species.

eHealth e a adoção da inovação em assisted living technologies : o caso das demências

RESUMO - Assistimos hoje a um contexto marcado (i) pelo progressivo envelhecimento das sociedades ocidentais, (ii) pelo aumento da prevalência das doenças crónicas, de que as demências são um exemplo, (iii) pelo significativo aumento dos custos associados a estas patologias, (iv) por orçamentos públicos fortemente pressionadas pelo controlo da despesa, (v) por uma vida moderna que dificulta o apoio intergeracional, tornando o suporte proporcionado pelos filhos particularmente difícil, (vi) por fortes expectativas relativamente à prestação de cuidados de saúde com qualidade. Teremos assim de ser capazes de conseguir melhorar os serviços de saúde, ao mesmo tempo que recorremos a menos recursos financeiros e humanos, pelo que a inovação parece ser crítica para a sustentabilidade do sistema. Contudo a difusão das Assistive Living Technologies, apesar do seu potencial, tem sido bastante baixa, nomeadamente em Portugal. Porquê? Hamer, Plochg e Moreira (2012), no editorial do International Journal of Healthcare Management, enquadram a Inovação como “podendo ser imprevisível e mesmo dolorosa, pelo que talvez possamos não ficar surpreendidos se surgirem resistências e que, inovações bastante necessárias, capazes de melhorar os indicadores de saúde, tenham sido de adoção lenta ou que tenham mesmo sido insustentáveis”. Em Portugal não há bibliografia que procure caracterizar o modelo de difusão da inovação em eHealth ou das tecnologias de vivência assistida. A bibliografia internacional é igualmente escassa. O presente projeto de investigação, de natureza exploratória, tem como objetivo principal, identificar barreiras e oportunidades para a implementação de tecnologias eHealth, aplicadas ao campo das demências. Como objetivos secundários pretendemse identificar as oportunidades e limitações em Portugal: mapa de competências nacionais, e propor medidas que possa acelerar a inovação em ALT, no contexto nacional. O projeto seguirá o modelo de um estudo qualitativo. Para o efeito foram conduzidas entrevistas em profundidade junto de experts em ALT, procurando obter a visão daqueles que participam do lado da Oferta- a Indústria; do lado da Procura- doentes, cuidadores e profissionais de saúde; bem como dos Reguladores. O instrumento utilizado para a recolha da informação pretendida foi o questionário não estruturado. A análise e interpretação da informação recolhida foram feitas através da técnica de Análise de Conteúdo. Os resultados da Análise de Conteúdo efetuada permitiram expressar a dicotomia barreira/oportunidade, nas seguintes categorias aqui descritas como contextos (i) Contexto Tecnológico, nas subcategorias de Acesso às Infraestruturas; Custo da Tecnologia; Interoperabilidade, (ii) Contexto do Valor Percecionado, nas subcategorias de Utilidade; Eficiência; Divulgação, (iii) Contexto Político, compreendendo a Liderança; Organização; Regulação; Recursos, (iv) Contexto Sociocultural, incluindo nomeadamente Idade; Literacia; Capacidade Económica, (v) Contexto Individual, incluindo como subcategorias, Capacidade de Adaptação a Novas tecnologias; Motivação; Acesso a equipamentos (vi) Contexto Específico da Doença, nomeadamente o Impacto Cognitivo; Tipologia Heterogénea e a Importância do Cuidador. Foi proposto um modelo exploratório, designado de Modelo de Contextos e Forças, que estudos subsequentes poderão validar. Neste modelo o Contexto Tecnológico é um Força Básica ou Fundamental; o Contexto do Valor Percecionado, constitui-se numa Força Crítica para a adoção de inovação, que assenta na sua capacidade para oferecer valor aos diversos stakeholders da cadeia de cuidados. Temos também o Contexto Político, com capacidade de modelar a adoção da inovação e nomeadamente com capacidade para o acelerar, se dele emitir um sinal de urgência para a mudança. O Contexto Sociocultural e Individual expressam uma Força Intrínseca, dado que elas são características internas, próprias e imutáveis no curto-prazo, das sociedade e das pessoas. Por fim há que considerar o Contexto Específico da Doença, nesta caso o das demências. Das conclusões do estudo parece evidente que as condições tecnológicas estão medianamente satisfeitas em Portugal, com evidentes progressos nos últimos anos (exceção para a interoperabilidade aonde há necessidade de maiores progressos), não constituindo portanto barreira à introdução de ALT. Aonde há necessidade de investir é nas áreas do valor percebido. Da análise feita, esta é uma área que constitui uma barreira à introdução e adoção das ALT em Portugal. A falta de perceção do valor que estas tecnologias trazem, por parte dos profissionais de saúde, doentes, cuidadores e decisores políticos, parece ser o principal entrave à sua adoção. São recomendadas estratégias de modelos colaborativos de Investigação e Desenvolvimento e de abordagens de cocriação com a contribuição de todos os intervenientes na cadeia de cuidados. Há também um papel que cabe ao estado no âmbito das prioridades e da mobilização de recursos, sendo-lhe requerida a expressão do sentido de urgência para que esta mudança aconteça. Foram também identificadas oportunidades em diversas áreas, como na prevenção, no diagnóstico, na compliance medicamentosa, na terapêutica, na monitorização, no apoio à vida diária e na integração social. O que é necessário é que as soluções encontradas constituam respostas àquilo que são as verdadeiras necessidades dos intervenientes e não uma imposição tecnológica que só por si nada resolve. Do estudo resultou também a perceção de que há que (i) continuar a trabalhar no sentido de aproximar a comunidade científica, da clínica e do doente, (ii) fomentar a colaboração entre centros, com vista à criação de escala a nível global. Essa colaboração já parece acontecer a nível empresarial, tendo sido identificadas empresas Portuguesas com vocação global. A qualidade individual das instituições de ensino, dos centros de investigação, das empresas, permite criar as condições para que Portugal possa ser país um piloto e um case-study internacional em ALT, desde que para tal pudéssemos contar com um trabalho colaborativo entre instituições e com decisões políticas arrojadas.

Memória do projecto cinco lugares. No exercício da sua função

Esta Memória de Projecto Cinco Lugares – No exercício da sua função funciona como um fluxo de ideias livres e inevitavelmente dispersas, que não são mais que uma consequência do pensamento sobre cada plano, cena e sequência que compõem o filme criado. A tese principal do filme, entre as várias ideias que nele se pretenderam elaborar, encontra reflexos e ressonâncias nas interpretações expressas ao longo dos vários capítulos iniciais. Assim, na Parte I (Caminhos do Tempo), faz-se uma contextualização teórica, com base nos textos de André Bazin, Gilles Deleuze e Marc Augé sobre as concepções de espaço e tempo, e analisam-se algumas das mais radicais obras do cinema contemporâneo (de Yasujirô Ozu, Robert Flaherty, Andy Warhol, Michael Snow a Victor Erice, Wang Bing, Abbas Kiarostami e James Benning). Esta contextualização e análise constituem fundamento à presente Memória, aprofundando-se a possibilidade do Tempo como categoria estrutural principal de um texto fílmico. Na Parte II, dá-se nota do percurso de Cinco Lugares, filme que congrega um conjunto de memórias sobre cinco lugares de uma cidade (Lisboa), ensurdecedora e em crescente movimento, e no qual se procurou registar, plano a plano, essas memórias pela, para usar uma expressão de Tarkovsky, “pressão do tempo no plano”. Iniciado no tempo do silêncio (público) do Pátio da Galé, o filme passou ao espaço privado e interior de uma habitação na Rua Nova do Loureiro, que a arquitectura tão naturalmente separa e resguarda do exterior. Do registo fílmico de um ritual religioso, numa Igreja de convento, transitámos para um dos lugares mais esquecidos da cidade, a Mãe d’Água/ Aqueduto das Águas Livres. Por fim, aportámos num antigo antro de loucura contida, o Pavilhão Panóptico do Hospital Miguel Bombarda, hoje museu de um conjunto de memórias – memórias que também constituem matéria de uma outra memória cinematográfica de João César Monteiro. Em comum, estes cinco lugares têm tudo e não têm nada. São arquitecturas que se estabelecem numa fronteira entre um interior e um exterior. São também matéria própria, constituída por tempos, espaços e identidades totalmente diferentes. São, ainda, cinco tipos de silêncio urbano e momentos de realidade documentados sob uma perspectiva de um mundo em aceleração. Em suma, os capítulos seguintes de ambas as Partes são uma das muitas conversas possíveis e inacabadas, qual coda num trecho musical, a ter sobre o que interessa verdadeiramente neste trabalho de projecto – o filme em si.

Context classification for service robots

This dissertation presents a solution for environment sensing using sensor fusion techniques and a context/environment classification of the surroundings in a service robot, so it could change his behavior according to the different rea-soning outputs. As an example, if a robot knows he is outdoors, in a field environment, there can be a sandy ground, in which it should slow down. Contrariwise in indoor environments, that situation is statistically unlikely to happen (sandy ground). This simple assumption denotes the importance of context-aware in automated guided vehicles.

Liver fibrosis progression in HIV/hepatitis C virus coinfected patients with normal aminotransferases levels

INTRODUCTION: Approximately 30% of hepatitis C virus (HCV) monoinfected patients present persistently normal alanine aminotransferase (ALT) levels. Most of these patients have a slow progression of liver fibrosis. Studies have demonstrated the rate of liver fibrosis progression in hepatitis C virus-human immunodeficiency virus (HCV-HIV) coinfected patients is faster than in patients infected only by HCV. Few studies have evaluated the histological features of chronic hepatitis C in HIV-infected patients with normal ALT levels. METHODS: HCV-HIV coinfected patients (HCV-RNA and anti-HIV positive) with known time of HCV infection (intravenous drugs users) were selected. Patients with hepatitis B surface antigen (HBsAg) positive or hepatitis C treatment before liver biopsy were excluded. Patients were considered to have a normal ALT levels if they had at least 3 normal determinations in the previous 6 months prior to liver biopsy. All patients were submitted to liver biopsy and METAVIR scale was used. RESULTS: Of 50 studied patients 40 (80%) were males. All patients were treated with antiretroviral therapy. The ALT levels were normal in 13 (26%) patients. HCV-HIV co-infected patients with normal ALT levels had presented means of the liver fibrosis stages (0.77±0.44 versus 1.86±1.38; p<0.001) periportal inflammatory activity (0.62±0.77 versus 2.24±1.35; p<0.001) and liver fibrosis progression rate (0.058±0.043 fibrosis unit/year versus 0.118±0.102 fibrosis unit/year) significantly lower as compared to those with elevated ALT. CONCLUSIONS: HCV-HIV coinfected patients with persistently normal ALTs showed slower progression of liver fibrosis. In these patients the development of liver cirrhosis is improbable.

Perceptions of the usefulness of external support to immunization coverage in Guinea-Bissau: a Delphi analysis of the GAVI-Alliance cash-based support

INTRODUCTION: Although many countries have improved vaccination coverage in recent years, some, including Guinea-Bissau, failed to meet expected targets. This paper tries to understand the main barriers to better vaccination coverage in the context of the GAVI-Alliance (The Global Alliance for Vaccines and Immunisation) cash-based support provided to Guinea-Bissau. METHODS: The analysis is based on a document analysis and a three round Delphi study with a final consensus meeting. RESULTS: Consensus attributed about 25% of the failure to perform better to implementation problems; and about 10% to governance and also 10% to scarce resources. The qualitative analysis validates the importance of implementation issues and upgraded the relevance of the human resources crisis as an important drawback. The recommendations were balanced in their upstream-downstream focus but were blind to health information issues and logistical difficulties. CONCLUSIONS: It is commendable that such a fragile state, with all sorts of barriers, manages to sustain a slow steady growth of its vaccination coverage. Not reaching the targets set reflects the inappropriateness of those targets rather than a lack of commitment of the health workforce. In the unstable context of countries such as Guinea-Bissau, the predictability of the funds from global health initiatives like the GAVI-Alliance seem to make all the difference in achieving small consistent health gains even in the presence of other major bottlenecks.

Engineering of metal oxide nanoparticles for application in electrochemical devices

The growing demand for materials and devices with new functionalities led to the increased inter-est in the field of nanomaterials and nanotechnologies. Nanoparticles, not only present a reduced size as well as high reactivity, which allows the development of electronic and electrochemical devices with exclusive properties, when compared with thin films. This dissertation aims to explore the development of several nanostructured metal oxides by sol-vothermal synthesis and its application in different electrochemical devices. Within this broad theme, this study has a specific number of objectives: a) research of the influence of the synthesis parameters to the structure and morphology of the nanoparticles; b) improvement of the perfor-mance of the electrochromic devices with the application of the nanoparticles as electrode; c) application of the nanoparticles as probes to sensing devices; and d) production of solution-pro-cessed transistors with a nanostructured metal oxide semiconductor. Regarding the results, several conclusions can be exposed. Solvothermal synthesis shows to be a very versatile method to control the growth and morphology of the nanoparticles. The electrochromic device performance is influenced by the different structures and morphologies of WO3 nanoparticles, mainly due to the surface area and conductivity of the materials. The dep-osition of the electrochromic layer by inkjet printing allows the patterning of the electrodes without wasting material and without any additional steps. Nanostructured WO3 probes were produced by electrodeposition and drop casting and applied as pH sensor and biosensor, respectively. The good performance and sensitivity of the devices is explained by the high number of electrochemical reactions occurring at the surface of the na-noparticles. GIZO nanoparticles were deposited by spin coating and used in electrolyte-gated transistors, which promotes a good interface between the semiconductor and the dielectric. The produced transistors work at low potential and with improved ON-OFF current ratio, up to 6 orders of mag-nitude. To summarize, the low temperatures used in the production of the devices are compatible with flexible substrates and additionally, the low cost of the techniques involved can be adapted for disposable devices.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

Hydatid cysts in muscles: clinical manifestations, diagnosis, and management of this atypical presentation

ABSTRACTINTRODUCTION: Hydatid cysts are rarely detected in muscle tissue (0.7-0.9%), even in endemic countries. The aim of this study was to present information regarding the clinical manifestations, diagnosis, and management of muscle echinococcosis.METHODS: Twenty-two patients with hydatid cysts in the muscle were followed from January 2006 through December 2014.RESULTS: Twenty-four sites of muscle involvement were observed in the 22 patients. Fifteen (68%) of our patients were women, while seven (32%) were men. The mean age was 28.1 ± 15.4 (6-61) years. The most frequent locations were the thigh (27.2%) and the paravertebral region (13.6%). Most patients reported a painless slow-growing mass with normal overlying skin. Most (90.2%) cases were treated by surgical excision and fine-needle aspiration.CONCLUSIONS: Primary muscle hydatid cyst should be considered in the differential diagnosis in cystic masses of the muscular system without pain and localized enlargement of soft tissue, especially in endemic areas. Hydatid cyst should be investigated using serological tests and imaging modalities. If possible, total surgical excision of hydatid cyst in the muscle should be performed.

The early metallurgy in Southwestern Iberia: metals from the Chalcolithic Settlement of São Pedro (Redondo)

Archaeological excavations carried out in the archaeological site of São Pedro (Southern Portugal) revealed a Chalcolithic settlement occupied in different moments of the 3rd millennium BC. The material culture recovered includes different types of materials, such as ceramics, lithics and metals. The later comprises about 30 artefacts with different typologies such as tools (e.g. awls, chisels and a saw) and weapons (e.g. daggers and arrowheads) mostly belonging to the 2nd and 3rd quarter of the 3rd millennium BC. In the present work the collection of chalcolithic metallic artefacts recovered in São Pedro was characterized. Analytical studies involved micro energy dispersive X-ray fluorescence spectrometry (micro-EDXRF) to determine elemental composition, together with optical microscopy and Vickers microhardness testing for microstructural characterisation and hardness determination. Main results show copper with variable amounts of arsenic and very low content of other impurities, such as iron. Moreover, nearly half of the collection is composed by arsenical copper alloys (As > 2 wt.%) and an association was found between arsenic content and typology since the weapons group (mostly daggers) present higher values than tools (mostly awls). These results suggest some criteria in the selection of arsenic-rich copper ores or smelting products. Furthermore, after casting an artefact would have been hammered, annealed and sometimes, finished with a hammering operation. Additionally, microstructural variations in this collection reveal somewhat different operational conditions during casting, annealing and forging, as expected in such a primitive metallurgy. Moreover the operational sequence seems to be used to achieve the required shape to the object, rather than to intentionally make the alloy harder. Overall, this study suggests that Chalcolithic metallurgists might have a poor control of the addition of arsenic and/or were unable to use this element to increase the hardness of tools and weapons. Finally, the compositions, manufacturing processes and hardness were compared to those from neighbouring regions and different chronological periods.

Pelvic lymphoscintigraphy: contribution to the preoperative staging of rectal cancer

PURPOSE: Preservation of the anal sphincter in surgery for cancer of the distal rectum in an attempt to avoid colostomy has been a main concern of colorectal surgeons. Various proposed procedures contradict oncological principles, especially with respect to pelvic lymphadenectomy. Therefore, prior knowledge of pelvic lymph node involvement is an important factor in choosing the operative technique, i.e., radical or conservative resection. Introduction of ultrasound, computerized tomography, and magnetic resonance have made preoperative study of the area possible. Nevertheless, these resources offer information of an anatomical nature only. Lymphoscintigraphy enables the morphological and functional evaluation of the pelvic area and contributes toward complementing the data obtained with the other imaging techniques. The objective of this prospective study is twofold: to standardize the lymphoscintigraphy technique and to use it to differentiate patients with rectal cancer from those with other coloproctologic diseases. CASUISTIC AND METHODS: Sixty patients with various coloproctologic diseases were studied prospectively. Ages ranged from 21 to 96 years (average, 51 and median, 55 years). Twenty-six patients were male and 34 were female. Thirty patients had carcinoma of the distal rectum as diagnosed by proctologic and anatomic-pathologic examinations, 20 patients had hemorrhoids, 5 had chagasic megacolon, 2 had diverticular disease, 2 had neoplasm of the right colon, and 1 had ulcerative colitis as diagnosed by proctologic exam and/or enema. The lymphoscintigraphy method consisted of injecting 0.25 mL of a dextran solution marked with radioactive technetium-99m into the right and left sides of the perianal region and obtaining images with a gamma camera. The results were analyzed statistically with a confidence level of 95% (P < .05) using the following statistical techniques: arithmetic and medium average, Fisher exact test, chi-square test corrected for continuity according to Yates, and distribution tables for the number of patients. RESULTS: In rectal cancer, the tracer progresses unilaterally or is absent; in other patients, the progress of the tracer is bilateral and symmetrical, although its progress may be slow. Statistical tests showed with high significance that the agreement index between the clinical diagnosis and the result of the lymphoscintigraphic exam was 93%. CONCLUSIONS: Lymphoscintigraphy is a standardized, painless, and harmless test that can be performed in all cases; it differentiates patients with rectal cancer from those with other coloproctological diseases.

The general practitioner and the surgeon: stereotypes and medical specialties

OBJECTIVE: To investigate and characterize the professional stereotypes associated with general medicine and surgery among Brazilian medical residents. METHODS: A randomized sample of residents of the General Medicine and Surgery Residence Programs were interviewed and their perceptions and views of general and surgical doctors were compared. RESULTS: The general practitioner was characterized by the residents in general to be principally a sensitive and concerned doctor with a close relationship with the patient; (45%); calm, tranquil, and balanced (27%); with intellectual skills (25%); meticulous and attentive to details (23%); slow to resolve problems and make decisions (22%); and working more with probabilities and hypotheses (20%). The surgeon was considered to be practical and objective (40%); quickly resolving problems (35%); technical with manual skills (23%); omnipotent, arrogant, and domineering (23%); anxious, stressed, nervous, and temperamental (23%); and more decided, secure, and courageous (20%). Only the residents of general medicine attributed the surgeon with less knowledge of medicine and only the surgeons attributed gender characteristics to their own specialty. CONCLUSION: There was considerable similarity in the description of a typical general practitioner and surgeon among the residents in general, regardless of the specialty they had chosen. It was interesting to observe that these stereotypes persist despite the transformations in the history of medicine, i.e. the first physicians (especially regarding the valorization of knowledge) and the first surgeons, so-called "barber surgeons" in Brazil (associated with less knowledge and the performance of high-risk procedures).

Habitat preferences, diet, feeding strategy and social organization of the black spider monkey [Ateles paniscus paniscus Linnaeus 1758] in Surinam

A Socioecological Field Study.This monograph reports on a 26 month socioecological study of black spider monkeys (Ateles paniscus paniscus)in the Raleigh-vallen — Voltzberg Nature Reserve, Surinam. It recognizes the fundamental importance of food to the behavior and the regulation of population density fox this primate. It clarifies the complex temporal and spatial effects of tropical rain forest food sources on the behavior of a group of spider monkeys, concentrating on food category, food plant identity and phenology, and quantity, density and dispersion of the most important food sources. In addition, the present study describes habitat choice, optimal feeding strategy and sexual behavior of the spider monkey, and discusses implications of diet for social behavior. This study is also fundamental to conservation. Specialized in eating mature fruits, the spider monkey is a very important dispersal agent for many trees and lianes, particularly canopy species. However, the spider monkey is probably the most vulnerable monkey species in Surinam and it is disappearing rapidly throughout the remainder of its range. Unfortunately, it is large and noisy and can be easily tracked and hunted. It is largely restricted to undisturbed high forest, and consequently habitat destruction has more effect on it than on most other species. Together with its slow reproductive rate (a female gives birth only once every four or five years), this means that the species is poorly adapted to recover from exploitation. In order to implement proper measures for conservation, data on forest type preferences, diet and social behavior of the species, or on closely related species, in undisturbed areas, such as the one described in this monograph, are essential tools for assessing the potential of proposed protected areas.

Regeneração natural de pupunha (Bactris gasipaes)

Numerous pejibaye plants were evaluated in 12 year old second growth on an abandoned farm to determine the extent of natural regeneration. Adults plabts with crowns above the canopy produce fruit. Fruits are predated by man and seeds by rodents. Lateral shoots grow weell with enough light or show leaf etiolation and reduced number in shade. Two seedlings were found, with low leaf number, riolated petioles and low leaf area, suggesting extremely slow growth in shade. Reproduction appears to depend upon natural or manmade clearings, the former of insuficient duration to permit natural regeneration. This, combined with other modifications, confirms pejibaye's status as a full domesticate.

Monitoring the early stiffness development in epoxy adhesives for structural strengthening

The present work aimed to assess the early-age evolution of E-modulus of epoxy adhesives used for Fibre-Reinforced Polymer (FRP) strengthening applications. The study involved adapting an existing technique devised for continuous monitoring of concrete stiffness since casting, called EMM-ARM (Elasticity Modulus Measurement through Ambient Response Method) for evaluation of epoxy stiffness. Furthermore, monotonic tensile tests according to ISO standards and cyclic tensile tests were carried out at several ages. A comparison between the obtained results was performed in order to better understand the performance of the several techniques in the assessment of stiffness of epoxy resins. When compared to the other methodologies, the method for calculation of E-modulus recommended by ISO standard led to lower values, since in the considered strain interval, the adhesive had a non-linear stress–strain relationship. The EMM-ARM technique revealed its capability in clearly identifying the hardening kinetics of epoxy adhesives, measuring the material stiffness growth during the entire curing period. At very early ages the values of Young׳s modulus obtained with quasi-static tests were lower than the values collected by EMM-ARM, due to the fact that epoxy resin exhibited a significant visco-elastic behaviour.