Examining mindfulness and its relation to self-differentiation and alexithymia

Published online first in 10 July 2013

Postoperative self-efficacy and psychological morbidity in radical prostatectomy

Objective: evaluate the general and perceived self-efficacy, psychological morbidity, and knowledge about postoperative care of patients submitted to radical prostatectomy. Identify the relationships between the variables and know the predictors of self-efficacy. Method: descriptive, cross-sectional study, conducted with 76 hospitalized men. The scales used were the General and Perceived Self-efficacy Scale and the Hospital Anxiety and Depression Scale, in addition to sociodemographic, clinical and knowledge questionnaires. Results: a negative relationship was found for self-efficacy in relation to anxiety and depression. Psychological morbidity was a significant predictor variable for self-efficacy. An active professional situation and the waiting time for surgery also proved to be relevant variables for anxiety and knowledge, respectively. Conclusion: participants had a good level of general and perceived self-efficacy and small percentage of depression. With these findings, it is possible to produce the profile of patients about their psychological needs after radical prostatectomy and, thus, allow the nursing professionals to act holistically, considering not only the need for care of physical nature, but also of psychosocial nature.

Development of a methodology to incorporate risk and uncertainty in electricity power planning

Dissertação de mestrado em Engenharia Industrial

Desenvolvimento de um Módulo Habitacional “embrionário” “Plug-in” de habitação unifamiliar

Dissertação de mestrado integrado em Arquitectura

Concrete with triphasic conductive materials for self-monitoring of cracking development subjected to flexure

In this study, the macro steel fiber (SF), carbon fiber (CF) and nano carbon black (NCB) as triphasic conductive materials were added into concrete, in order to improve the conductivity and ductility of concrete. The influence of NCB, SF and CF on the post crack behavior and conductivity of concrete was explored. The effect of the triphasic conductive materials on the self-diagnosing ability to the load–deflection property and crack widening of conductive concrete member subjected to bending were investigated. The relationship between the fractional change in surface impedance (FCR) and the crack opening displacement (COD) of concrete beams with conductive materials has been established. The results illustrated that there is a linear relationship between COD and FCR.

Influence of casting condition on the anisotropy of the fracture properties of Steel Fibre Reinforced Self-Compacting Concrete (SFRSCC)

Identification of the tensile constitutive behaviour of Fibre Reinforced Concrete (FRC) represents an important aspect of the design of structural elements using this material. Although an important step has been made with the introduction of guidance for the design with regular FRC in the recently published fib Model Code 2010, a better understanding of the behaviour of this material is still necessary, mainly for that with self-compacting properties. This work presents an experimental investigation employing Steel Fibre Self-Compacting Concrete (SFRSCC) to cast thin structural elements. A new test method is proposed for assessing the post-cracking behaviour and the results obtained with the proposed test method are compared with the ones resulted from the standard three-point bending tests (3PBT). Specimens extracted from a sandwich panel consisting of SFRSCC layers are also tested. The mechanical properties of SFRSCC are correlated to the fibre distribution by analysing the results obtained with the different tests. Finally, the stress-crack width constitutive law proposed by the fib Model Code 2010 is analysed in light of the experimental results.

Lithium-doped silk fibroin films for application in electrochromic devices

Silk fibroin (SF) is a commonly available natural biopolymer produced in specialized glands of arthropods, with a long history of use in textile production and also in health cares. The exceptional intrinsic properties of these fibers, such as self-assembly, machinability, biocompatibility, biodegradation or non-toxicity, offer a wide range of exciting opportunities [1]. It has long been recognized that silk can be a rich source of inspiration for designing new materials with tailored properties, enhanced performance and high added value for targeted applications, opening exciting new prospects in the domain of materials science and related technological fields, including bio-friendly integration, miniaturization and multifunctionalization. In recent years it has been demonstrated that fibroin is an excellent material for active components in optics and photonics devices. Progress in new technological fields such as optics, photonics and electronics are emerging [2,3]. The incorporation of polymer electrolytes as components of various devices (advanced batteries, smart windows, displays and supercapacitors) offers significant advantages with respect to traditional electrolytes, including enhanced reliability and improved safety. SF films are particularly attractive in this context. They have near-perfect transparency across the VIS range, surface flatness (together with outstanding mechanical robustness), ability to replicate patterned substrates and their thickness may be easily tailored from a few nanometers to hundreds of micrometers through spin-casting of a silk solution into subtract. Moreover, fibroin can be added to other biocomponents or salts in order to modify the biomaterial properties leading to optimized and total different functions. Preliminary tests performed with a prototype electrochromic device (ECD) incorporating SF films doped with lithium triflate and lithium tetrafluoroborate (LiTFSI and LiBF4, respectively) as electrolyte and WO3 as cathodic electrochromic layer, are extremely encouraging. Aiming to evaluate the performance of the ion conducting SF membranes doped with LiTFSI and LiBF4 (SF-Li), small ECDs with glass/ITO/WO3/SF-Li/CeO2-TiO2/ITO/glass configuration were assembled and characterized. The device exhibited, after 4500 cycles, the insertion of charge at -3.0 V reached –1.1 mC.cm-2 in 15 s. After 4500 cycles the window glass-staining, glass/ITO/WO3/Fibrin-Li salts electrolyte/CeO2-TiO2/ITO/glass configuration was reversible and featured a T  8 % at λ = 686 nm

Development of auxetic structures from braided composites produced from basalt fiber

In this work, novel auxetic structure has been developed from braided composites produced from basalt fiber. The paper reported the auxetic and tensile behavior of the structures produced from basalt fiber and also compared with structures developed from braided composites having glass fiber as core. The basic design is modified with straight rod to improve the strengthening behavior of structure with structural elements. The Poisson’s ratio of the modified structure are studied. The Poisson’s ratio of the structure made from basalt and glass reinforced BCRs are almost similar but the tensile behavior of basalt based structure is good than glass fiber.

Structure dependent resistivity and dielectric characteristics of tantalum oxynitride thin films produced by magnetron sputtering

tThe main purpose of this work is to present and to interpret the change of electrical properties of TaxNyOzthin films, produced by DC reactive magnetron sputtering. Some parameters were varied during deposi-tion: the flow of the reactive gases mixture (N2and O2, with a constant concentration ratio of 17:3); thesubstrate voltage bias (grounded, −50 V or −100 V) and the substrate (glass, (1 0 0) Si or high speed steel).The obtained films exhibit significant differences. The variation of the deposition parameters inducesvariations of the composition, microstructure and morphology. These differences cause variation of theelectrical resistivity essentially correlated with the composition and structural changes. The gradualdecrease of the Ta concentration in the films induces amorphization and causes a raise of the resistivity.The dielectric characteristics of some of the high resistance TaxNyOzfilms were obtained in the sampleswith a capacitor-like design (deposited onto high speed steel, with gold pads deposited on the dielectricTaxNyOzfilms). Some of these films exhibited dielectric constant values higher than those reported forother tantalum based dielectric films.

An algorithmic approach to estimating the minimal number of periodic points for smooth self-maps of simply-connected manifolds

For a given self-map f of M, a closed smooth connected and simply-connected manifold of dimension m ≥ 4, we provide an algorithm for estimating the values of the topological invariant Dm r [f], which equals the minimal number of r-periodic points in the smooth homotopy class of f. Our results are based on the combinatorial scheme for computing Dm r [f] introduced by G. Graff and J. Jezierski [J. Fixed Point Theory Appl. 13 (2013), 63–84]. An open-source implementation of the algorithm programmed in C++ is publicly available at http://www.pawelpilarczyk.com/combtop/.

New self-assembled supramolecular hydrogels based on dehydropeptides

Supramolecular hydrogels rely on small molecules that self-assemble in water as a result of the cooperative effect of several relatively weak intermolecular interactions. Peptide-based low molecular weight hydrogelators have attracted enormous interest owing to the simplicity of small molecules combined with the versatility and biocompatibility of peptides. In this work, naproxen, a well known non-steroidal anti-inflammatory drug, was N-conjugated with various dehydrodipeptides to give aromatic peptide amphiphiles that resist proteolysis. Molecular dynamics simulations were used to obtain insight into the underlying molecular mechanism of self-assembly and to rationalize the design of this type of hydrogelators. The results obtained were in excellent agreement with the experimental observations. Only dehydrodipeptides having at least one aromatic amino acid gave hydrogels. The characterization of the hydrogels was carried out using transmission electron microscopy (TEM), circular dichroism (CD), fluorescence spectroscopy and also rheological assays.

A supervisão pedagógica como prática de transformação: o lugar das narrativas profissionais

Este texto tem como objetivo discutir o lugar das narrativas profissionais, de natureza autobiográfica, produzidas por professores em contexto de formação pós-graduada em supervisão pedagógica. Começando pela discussão do conceito de qualidade em educação, e que radica numa concepção de educação para o desenvolvimento sustentável e para a transformação de pessoas e de contextos, a autora passa para uma análise do papel dos professores no desenvolvimento de práticas pedagógicas de qualidade. Embora os contextos de educação e de formação tenham um papel determinante, os professores, principalmente através das expectativas que detêm face aos seus alunos, têm um papel crucial no combate a formas de discriminação e de exclusão nas escolas. O conceito de supervisão que informa este texto também se coloca ao serviço da qualidade em educação enunciada, ao ser tomado enquanto teoria e prática de regulação crítica e colaborativa da pedagogia e do desenvolvimento profissional, numa visão da educação para a transformação e para a sustentabilidade. O texto finaliza com a ilustração do modo como as narrativas profissionais se constituem enquanto estratégias de autossupervisão do trabalho docente num contexto de formação pós-graduada. Desenvolvidas em contextos profissionais, e estabelecendo pontes entre o conhecimento acadêmico e experiencial, elas incidem na análise dos modos como o trabalho docente se coloca (ou não) ao serviço de uma pedagogia e de um desenvolvimento profissional docente assente em valores de sustentabilidade e de transformação, identificando os constrangimentos estruturais e apontando rumos de ação.

Self-evaluated burden in adults with attention-deficit hyperactivity disorder (ADHD): a pilot study

OBJECTIVES: To investigate feasibility and easiness of administration of a brief and simple instrument addressing impairment associated with adult attention deficit hyperactivity disorder (ADHD) and if ADHD subtypes were correlated to specific profiles of self-reported impairment. METHODS: Thirty-five adults (19 men and 16 women; mean age of 31.74 years) diagnosed with ADHD according to DSM-IV with a semi-structured interview (K-SADS PL) were asked to fill out a Likert scale covering six different functional areas (academic, professional, marital, familiar, social and daily activities). Clinicians questioned patients about their understanding of the questionnaire and investigated their answers in more details to check consistency of their answers. RESULTS: No patient reported difficulties in understanding the questionnaire. Further questioning of patients' answers confirmed their choices in the six areas. Academic burden had the highest average score in the whole sample, followed by professional burden. Social area had the lowest average score in this sample.

Self-compacting concrete and conventional concrete in the arena Pernambuco: comparative study of durability indicators and economic feasibility

This study addressed the application, strength and durability of self-compacting concrete (SCC) in a large-scale construction site, comparing its performance with vibrated conventional concrete (CC) with similar characteristics, assessing its economic feasibility. The studies were undertaken in the Arena Pernambuco project and involved the concreting during May, June and July 2012, for data collection, accompanying the routine concrete control tests and performing specific strength and durability tests. The SCC compressive strength was on average 4.5% higher than the CC one, and its formwork reinforced to withstand greater lateral pressure of the fresh concrete. The durability indicators results were in favour of SCC, which cost was 13.5% higher than CC.