Mid-infrared photonic sensors based on metamaterial structures

In this work three different metallic metamaterials (MMs) structures such as asymmetric split ring resonators (A-SRRs), dipole and split H-shaped (ASHs) structures that support plasmonic resonances have been developed. The aim of the work involves the optimization of photonic sensor based on plasmonic resonances and surface enhanced infrared absorption (SEIRA) from the MM structures. The MMs structures were designed to tune their plasmonic resonance peaks in the mid-infrared region. The plasmonic resonance peaks produced are highly dependent on the structural dimension and polarisation of the electromagnetic (EM) source. The ASH structure particularly has the ability to produce the plasmonic resonance peak with dual polarisation of the EM source. The double resonance peaks produced due to the asymmetric nature of the structures were optimized by varying the fundamental parameters of the design. These peaks occur due to hybridization of the individual elements of the MMs structure. The presence of a dip known as a trapped mode in between the double plasmonic peaks helps to narrow the resonances. A periodicity greater than twice the length and diameter of the metallic structure was applied to produce narrow resonances for the designed MMs. A nanoscale gap in each structure that broadens the trapped mode to narrow the plasmonic resonances was also used. A thickness of 100 nm gold was used to experimentally produce a high quality factor of 18 in the mid-infrared region. The optimised plasmonic resonance peaks was used for detection of an analyte, 17β-estradiol. 17β-estradiol is mostly responsible for the development of human sex organs and can be found naturally in the environment through human excreta. SEIRA was the method applied to the analysis of the analyte. The work is important in the monitoring of human biology and in water treatment. Applying this method to the developed nano-engineered structures, enhancement factors of 10^5 and a sensitivity of 2791 nm/RIU was obtained. With this high sensitivity a figure of merit (FOM) of 9 was also achieved from the sensors. The experiments were verified using numerical simulations where the vibrational resonances of the C-H stretch from 17β-estradiol were modelled. Lastly, A-SRRs and ASH on waveguides were also designed and evaluated. These patterns are to be use as basis for future work.

Efficient split eld FDTD analysis of third-order nonlinear materials in two-dimensionally periodic media

In this work the split-field finite-difference time-domain method (SF-FDTD) has been extended for the analysis of two-dimensionally periodic structures with third-order nonlinear media. The accuracy of the method is verified by comparisons with the nonlinear Fourier Modal Method (FMM). Once the formalism has been validated, examples of one- and two-dimensional nonlinear gratings are analysed. Regarding the 2D case, the shifting in resonant waveguides is corroborated. Here, not only the scalar Kerr effect is considered, the tensorial nature of the third-order nonlinear susceptibility is also included. The consideration of nonlinear materials in this kind of devices permits to design tunable devices such as variable band filters. However, the third-order nonlinear susceptibility is usually small and high intensities are needed in order to trigger the nonlinear effect. Here, a one-dimensional CBG is analysed in both linear and nonlinear regime and the shifting of the resonance peaks in both TE and TM are achieved numerically. The application of a numerical method based on the finite- difference time-domain method permits to analyse this issue from the time domain, thus bistability curves are also computed by means of the numerical method. These curves show how the nonlinear effect modifies the properties of the structure as a function of variable input pump field. When taking the nonlinear behaviour into account, the estimation of the electric field components becomes more challenging. In this paper, we present a set of acceleration strategies based on parallel software and hardware solutions.

Chemotaxonomic studies on Schwenckia americana LINN.

This study investigated the chemotaxonomic studies on Schwenckia americana Linn., a member of the family Solanaceae predominantly found mostly in low grass fields, Nigeria. The habit is annual herbaceous weed with slender stem characterized with free branching and growing up to 45cm in height.They are used mainly as medicine. The leaves are simple, entire, elliptic to ovate in shape, smooth, variable, petiolate and larger at the lower region of stem and narrowing to smaller almost sessile and oblanceolate towards the apical regions which are alternately arranged and acrescently structured from the top to the base upto 3.7 ± 1.5cm long and 2.4±0.6cm wide. The inflorescence is a panicle of 15 or more flowers occurring at stem terminal.The flowers are whitish tubular structures measuring up to 1.0±0.2cm in length and 0.1cm in diameter. The petals are whitish up to 0.9 ±0.2cm in length and sepals are greenish up to 0.1cm in length. The berry fruit is greenish when unripe and pale yellowish when ripe up to 0.3±0.1cm in diameter. The seeds are blackish and spherical or triangular shaped with rough edges measuring up to 0.1cm in diameter. The epidermal studies reveal anomocytic stomata whereas the trichomes are simple uniseriate forms wth bulge heads. The anatomy of mid-ribs and petioles showed bicollateral vascular systems. There are three vascular traces and the node is unilacunar. The petioles have 2 rib traces at primary growth phase. At secondary growth phase, the mid-rib and petiole revealed vascular arcs and the stem has a ring of open vascular system. The cytological studies showed a diploid chromosome number of 2n = 24 and n = 12 for the haploids. Alkaloids, saponins, tannins, phlobatannins, flavonoids, combined anthraquinones, free anthraquinones and cardiac glycosides are present.

Aluminum nanoholes for optical biosensing

Sub-wavelength diameter holes in thin metal layers can exhibit remarkable optical features that make them highly suitable for (bio)sensing applications. Either as efficient light scattering centers for surface plasmon excitation or metal-clad optical waveguides, they are able to form strongly localized optical fields that can effectively interact with biomolecules and/or nanoparticles on the nanoscale. As the metal of choice, aluminum exhibits good optical and electrical properties, is easy to manufacture and process and, unlike gold and silver, its low cost makes it very promising for commercial applications. However, aluminum has been scarcely used for biosensing purposes due to corrosion and pitting issues. In this short review, we show our recent achievements on aluminum nanohole platforms for (bio)sensing. These include a method to circumvent aluminum degradation—which has been successfully applied to the demonstration of aluminum nanohole array (NHA) immunosensors based on both, glass and polycarbonate compact discs supports—the use of aluminum nanoholes operating as optical waveguides for synthesizing submicron-sized molecularly imprinted polymers by local photopolymerization, and a technique for fabricating transferable aluminum NHAs onto flexible pressure-sensitive adhesive tapes, which could facilitate the development of a wearable technology based on aluminum NHAs.

Estructuras sub-longutud de onda para el diseño de dispositivos en guía dieléctrica

Sub-wavelength structures are enabling the design of devices based in dielectric waveguides with unprecedented performance in both the near-infrared and mid-infrared wavelength regions. These devices include fiber-to-chip grating couplers with sub-decibel efficiency, waveguide couplers with bandwidths of several hundred nanometers, and low loss suspended waveguides. Here we will report our progress in the electromagnetic modelling and simulation of sub-wavelength structures, providing at the same time an intuitive vision of their fundamental optical properties. Furthermore, we will address design strategies for several integrated optical devices based on these structures, and present the latest experimental results for structures operating both at near and mid-infrared wavelengths.

L'activité tonique diaphragmatique chez les enfants avec et sans support respiratoire

Introduction : Les nourrissons, vu la grande compliance de leur cage thoracique, doivent maintenir activement leur volume pulmonaire de fin d’expiration (VPFE). Ceci se fait par interruption précoce de l’expiration, et par le freinage expiratoire au niveau laryngé et par la persistance de la contraction des muscles inspiratoires. Chez les nourrissons ventilés mécaniquement, notre équipe a montré que le diaphragme est activé jusqu’à la fin de l’expiration (activité tonique). Il n’est pas clair si cette activité tonique diaphragmatique compense pour l’absence de freinage laryngé liée à l’intubation endotrachéale. Objectif : Notre objectif est de déterminer si l’activité tonique diaphragmatique persiste après l’extubation chez les nourrissons et si elle peut être observée chez les enfants plus âgés. Méthode : Ceci est une étude observationnelle longitudinale prospective de patients âgés de 1 semaine à 18 ans admis aux soins intensifs pédiatriques (SIP), ventilés mécaniquement pour >24 heures et avec consentement parental. L’activité électrique du diaphragme (AEdi) a été enregistrée à l’aide d’une sonde nasogastrique spécifique à 4 moments durant le séjour aux SIP : en phase aigüe, pré et post-extubation et au congé. L’AEdi a été analysée de façon semi-automatique. L’AEdi tonique a été définie comme l’AEdi durant le dernier quartile de l’expiration. Résultats : 55 patients avec un âge médian de 10 mois (écart interquartile: 1-48) ont été étudiés. Chez les nourrissons (<1an, n=28), l’AEdi tonique en pourcentage de l’activité inspiratoire était de 48% (30-56) en phase aigüe, 38% (25-44) pré-extubation, 28% (17-42) post-extubation et 33% (22-43) au congé des SIP (p<0.05, ANOVA, avec différence significative entre enregistrements 1 et 3-4). Aucun changement significatif n’a été observé pré et post-extubation. L’AEdi tonique chez les patients plus âgés (>1an, n=27) était négligeable en phases de respiration normale (0.6mcv). Par contre, une AEdi tonique significative (>1mcv et >10%) a été observée à au moins un moment durant le séjour de 10 (37%) patients. La bronchiolite est le seul facteur indépendant associé à l’activité tonique diaphragmatique. Conclusion : Chez les nourrissons, l’AEdi tonique persiste après l’extubation et elle peut être réactivée dans certaines situations pathologiques chez les enfants plus âgés. Elle semble être un indicateur de l’effort du patient pour maintenir son VPFE. D’autres études devraient être menées afin de déterminer si la surveillance de l’AEdi tonique pourrait faciliter la détection de situations de ventilation inappropriée.

NONLINEAR EFFECTS IN MAGNETIC GARNET FILMS AND NONRECIPROCAL OPTICAL BLOCH OSCILLATIONS IN WAVEGUIDE ARRAYS

This dissertation presents detailed experimental and theoretical investigations of nonlinear and nonreciprocal effects in magnetic garnet films. The dissertation thus comprises two major sections. The first section concentrates on the study of a new class of nonlinear magneto-optic thin film materials possessing strong higher order magnetic susceptibility for nonlinear optical applications. The focus was on enlarging the nonlinear performance of ferrite garnet films by strain generation and compositional gradients in the sputter-deposition growth of these films. Under this project several bismuth-substituted yttrium iron garnet (Bi,Y) 3 (Fe,Ga)5 O12(acronym as Bi:YIG) films have been sputter-deposited over gadolinium gallium garnet (Gd 3 Ga5 O12 ) substrates and characterized for their nonlinear optical response. One of the important findings of this work is that lattice mismatch strain drives the second harmonic (SH) signal in the Bi:YIG films, in agreement with theoretical predictions; whereas micro-strain was found not to correlate significantly with SH signal at the micro-strain levels present in these films. This study also elaborates on the role of the film's constitutive elements and their concentration gradients in nonlinear response of the films. Ultrahigh sensitivity delivered by second harmonic generation provides a new exciting tool for studying magnetized surfaces and buried interfaces, making this work important from both a fundamental and application point of view. The second part of the dissertation addresses an important technological need; namely the development of an on-chip optical isolator for use in photonic integrated circuits. It is based on two related novel effects, nonreciprocal and unidirectional optical Bloch oscillations (BOs), recently proposed and developed by Professor Miguel Levy and myself. This dissertation work has established a comprehensive theoretical background for the implementation of these effects in magneto-optic waveguide arrays. The model systems we developed consist of photonic lattices in the form of one-dimensional waveguide arrays where an optical force is introduced into the array through geometrical design turning the beam sideways. Laterally displaced photons are periodically returned to a central guide by photonic crystal action. The effect leads to a novel oscillatory optical phenomenon that can be magnetically controlled and rendered unidirectional. An on-chip optical isolator was designed based on the unidirectionality of the magneto-opticBloch oscillatory motion. The proposed device delivers an isolation ratio as high as 36 dB that remains above 30 dB in a 0.7 nm wavelength bandwidth, at the telecommunication wavelength 1.55 μm. Slight modifications in isolator design allow one to achieve an even more impressive isolation ratio ~ 55 dB, but at the expense of smaller bandwidth. Moreover, the device allows multifunctionality, such as optical switching with a simultaneous isolation function, well suited for photonic integrated circuits.

Study of nanostructured targets for plasma production via laser ablation

Metal nanowires (NWs) - nanostructures 20-100 nm in diameter and up to tens of micrometers long - behave as waveguides when irradiated with light with wavelength much greater than their diameter. This is due to collective excitations of free electrons (plasmons) in the metal which couple to light and travel on the surface of the nanowire. This effect can be used to efficiently absorb laser pulses to produce dense and hot plasma on special nanostructured targets with metal nanowires vertically aligned on the surface. In this thesis work, nanostructured targets with different parameters (length, diameter, metal and fabrication process) have been irradiated with infrared laser light. X-ray flux emitted by the cooling plasma is measured during irradiation, and the depth of craters formed on the target is measured later. This data is used to choose which target parameters are best for plasma production. Different targets are compared with each other and against a control, non-nanostructured (bulk) target. As will be shown, highly significant (> 5 sigma) differences are found between targets with different nanostructures, and between nanostructured and bulk target. This differences are very difficult to explain whithout accounting for the nanostructures in the targets. Therefore, data collected and analized in this thesis work supports the hypotesys that nanostructured targets perform better than bulk targets for laser plasma production purposes, and provides useful indications for optimization of NWS' parameters.

L'activité tonique diaphragmatique chez les enfants avec et sans support respiratoire

Introduction : Les nourrissons, vu la grande compliance de leur cage thoracique, doivent maintenir activement leur volume pulmonaire de fin d’expiration (VPFE). Ceci se fait par interruption précoce de l’expiration, et par le freinage expiratoire au niveau laryngé et par la persistance de la contraction des muscles inspiratoires. Chez les nourrissons ventilés mécaniquement, notre équipe a montré que le diaphragme est activé jusqu’à la fin de l’expiration (activité tonique). Il n’est pas clair si cette activité tonique diaphragmatique compense pour l’absence de freinage laryngé liée à l’intubation endotrachéale. Objectif : Notre objectif est de déterminer si l’activité tonique diaphragmatique persiste après l’extubation chez les nourrissons et si elle peut être observée chez les enfants plus âgés. Méthode : Ceci est une étude observationnelle longitudinale prospective de patients âgés de 1 semaine à 18 ans admis aux soins intensifs pédiatriques (SIP), ventilés mécaniquement pour >24 heures et avec consentement parental. L’activité électrique du diaphragme (AEdi) a été enregistrée à l’aide d’une sonde nasogastrique spécifique à 4 moments durant le séjour aux SIP : en phase aigüe, pré et post-extubation et au congé. L’AEdi a été analysée de façon semi-automatique. L’AEdi tonique a été définie comme l’AEdi durant le dernier quartile de l’expiration. Résultats : 55 patients avec un âge médian de 10 mois (écart interquartile: 1-48) ont été étudiés. Chez les nourrissons (<1an, n=28), l’AEdi tonique en pourcentage de l’activité inspiratoire était de 48% (30-56) en phase aigüe, 38% (25-44) pré-extubation, 28% (17-42) post-extubation et 33% (22-43) au congé des SIP (p<0.05, ANOVA, avec différence significative entre enregistrements 1 et 3-4). Aucun changement significatif n’a été observé pré et post-extubation. L’AEdi tonique chez les patients plus âgés (>1an, n=27) était négligeable en phases de respiration normale (0.6mcv). Par contre, une AEdi tonique significative (>1mcv et >10%) a été observée à au moins un moment durant le séjour de 10 (37%) patients. La bronchiolite est le seul facteur indépendant associé à l’activité tonique diaphragmatique. Conclusion : Chez les nourrissons, l’AEdi tonique persiste après l’extubation et elle peut être réactivée dans certaines situations pathologiques chez les enfants plus âgés. Elle semble être un indicateur de l’effort du patient pour maintenir son VPFE. D’autres études devraient être menées afin de déterminer si la surveillance de l’AEdi tonique pourrait faciliter la détection de situations de ventilation inappropriée.

Chest Breadths to Predict Individuals' Age - A Case Based View

It is well known that rib cage dimensions depend on the gender and vary with the age of the individual. Under this setting it is therefore possible to assume that a computational approach to the problem may be thought out and, consequently, this work will focus on the development of an Artificial Intelligence grounded decision support system to predict individual’s age, based on such measurements. On the one hand, using some basic image processing techniques it were extracted such descriptions from chest X-rays (i.e., its maximum width and height). On the other hand, the computational framework was built on top of a Logic Programming Case Base approach to knowledge representation and reasoning, which caters for the handling of incomplete, unknown, or even contradictory information. Furthermore, clustering methods based on similarity analysis among cases were used to distinguish and aggregate collections of historical data in order to reduce the search space, therefore enhancing the cases retrieval and the overall computational process. The accuracy of the proposed model is satisfactory, close to 90%.

Contributo para a caracterização das raças serpentinas e charnequeira

Esta dissertação retoma um estudo com 49 cabras e 45 cabritos da raça Serpentina, 24 cabras e 28 cabritos da raça Charnequeira, exploradas em regime extensivo. Pretende ser um contributo para a caracterização destas raças. Com este objectivo calculou-se a fertilidade que foi de 92% nas duas raças e a prolificidade foi de 160% (62,5% partos duplos) na Serpentina e de 141% (57,1% partos duplos) na Charnequeira. A mortalidade dos cabritos, do nascimento até ao desmame, foi de 15,7%, na Serpentina e de 6,6%, na Chamequeira. Os pesos das cobrições ao parto, na Serpentina aumentaram 17% e 13,6% na Chamequeira, apresentando variações significativas na raça, mas não entre raças. Os cabritos de partos simples obtiveram maiores ganhos médios diários do nascimento ao desmame. Não houve variações significativas nos pesos entre machos e fêmeas. Analisaram-se 24 carcaças de cabritos, machos inteiros. O Rendimento Corrigido foi de 52% para as duas e a relação Músculo/Osso de 2,13 (Charnequeira) e 2,12 (Serpentina). O Índice Compacidade para a Charnequeira foi de 11,78 e 11,29 para a Serpentina, evidenciando esta melhor conformação. Definiram-se os seguintes cortes nas carcaças: I-Pá; II-Perna; III- Costela+Sela; IV-Aba; V-Pescoço. Analisou-se o músculo quanto à gordura, proteína, cálcio e fósforo. ABSTRACT: This dissertation retrieves a study involving 49 goats and 45 kids of Serpentina breed, 24 goats and 28 kids of Chamequeira breed exploited in an extensive management. It is intended as a contribution to the characterization of these breeds. To this end, various reproductive parameters were calculated. The fertility stood at 92% in both breeds and the prolificacy in the breed Serpentina was 160% (62.5% in twin births) and in the breed of Chamequeira was 141% (57.1% in twin births). We noted a mortality rate in kids from birth to weaning higher in the Serpentina breed (15.7%), while the Chamequeira breed recorded 6.6%. The evolution of the weights during the mating period to childbirth, increasing 17% in the Serpentina breed and 13.6% in Chamequeira breed. We noted significant variations in each breed, but not between each other. The kids resulting of simple birth had higher average daily weight gain from birth to weaning. We did not note significant variations of weight between males and females. We analysed the carcasses of 24 male kids. The corrected yield was 52% for both breeds and the muscle-bone ratio was 2,13 (Chamequeira) and 2,12 (Serpentina). The compactness index for the Chamequeira breed was 11.78 and 11.29 for the Serpentina breed, showing Serpentina breed had better conformation. We proposed the following cuts in the carcass: I-Shovel, II Leg, III- Rib +Sela, IV-Aba and V-Neck. We also analysed the muscle according to their fat, protein, calcium and phosphorus, aiming to show the dietary interest of this muscle.

Genetic parameters for carcass traits and body weight using a Bayesian approach in the Canchim cattle.

Correlation between genetic parameters and factors such as backfat thickness (BFT), rib eye area (REA), and body weight (BW) were estimated for Canchim beef cattle raised in natural pastures of Brazil. Data from 1648 animals were analyzed using multi-trait (BFT, REA, and BW) animal models by the Bayesian approach. This model included the effects of contemporary group, age, and individual heterozygosity as covariates. In addition, direct additive genetic and random residual effects were also analyzed. Heritability estimated for BFT (0.16), REA (0.50), and BW (0.44) indicated their potential for genetic improvements and response to selection processes. Furthermore, genetic correlations between BW and the remaining traits were high (P > 0.50), suggesting that selection for BW could improve REA and BFT. On the other hand, genetic correlation between BFT and REA was low (P = 0.39 ± 0.17), and included considerable variations, suggesting that these traits can be jointly included as selection criteria without influencing each other. We found that REA and BFT responded to the selection processes, as measured by ultrasound. Therefore, selection for yearling weight results in changes in REA and BFT.

Resonant metamaterials for the control of Rayleigh waves

Since their emergence, locally resonant metamaterials have found several applications for the control of surface waves, from micrometer-sized electronic devices to meter-sized seismic barriers. The interaction between Rayleigh-type surface waves and resonant metamaterials has been investigated through the realization of locally resonant metasurfaces, thin elastic interfaces constituted by a cluster of resonant inclusions or oscillators embedded near the surface of an elastic waveguide. When such resonant metasurfaces are embedded in an elastic homogeneous half-space, they can filter out the propagation of Rayleigh waves, creating low-frequency bandgaps at selected frequencies. In the civil engineering context, heavy resonating masses are needed to extend the bandgap frequency width of locally resonant devices, a requirement that limits their practical implementations. In this dissertation, the wave attenuation capabilities of locally resonant metasurfaces have been enriched by proposing (i) tunable metasurfaces to open large frequency bandgaps with small effective inertia, and by developing (ii) an analytical framework aimed at studying the propagation of Rayleigh waves propagation in deep resonant waveguides. In more detail, inertial amplified resonators are exploited to design advanced metasurfaces with a prescribed static and a tunable dynamic response. The modular design of the tunable metasurfaces allows to shift and enlarge low-frequency spectral bandgaps without modifying the total inertia of the metasurface. Besides, an original dispersion law is derived to study the dispersive properties of Rayleigh waves propagating in thick resonant layers made of sub-wavelength resonators. Accordingly, a deep resonant wave barrier of mechanical resonators embedded inside the soil is designed to impede the propagation of seismic surface waves. Numerical models are developed to confirm the analytical dispersion predictions of the tunable metasurface and resonant layer. Finally, a medium-size scale resonant wave barrier is designed according to the soil stratigraphy of a real geophysical scenario to attenuate ground-borne vibration.

L'accuratezza diagnostica dei test clinici per la sindrome dello stretto toracico: una revisione sistematica della letteratura

Obiettivo: indagare l’accuratezza diagnostica dei principali test provocativi per la diagnosi di sindrome dello stretto toracico (TOS) neurogena. Metodi: tra Aprile e Settembre 2022 sono state condotte ricerche su 5 banche dati/motori di ricerca elettronici, utilizzando stringhe di ricerca costituite da parole chiave e termini MeSh (Medical Subject Headings). Sono stati inclusi tutti gli studi che indagassero l’accuratezza diagnostica dei test clinici. La valutazione metodologica degli studi è avvenuta attraverso lo strumento di critical appraisal CASP Checklist per gli studi diagnostici. È stata svolta una sintesi qualitativa degli studi considerati eleggibili. Risultati: sono stati identificati in totale 7784 studi, ma solo 12 sono stati inclusi nella revisione. Gli index test indagati erano diversi nei vari studi, così come i reference standard con cui venivano comparati (quando presenti). La qualità metodologica della maggior parte degli studi si è rivelata bassa. L’assenza di reporting standard crea un’eterogeneità tale non permettere la comparazione e la sintesi dei risultati con strumenti statistici. Gli studi sull’accuratezza diagnostica delle manovre provocative sono tra loro contrastanti in termini di risultati e non è possibile trarre conclusioni sicure. Nemmeno gli esami di imaging sembrano così utili per la diagnosi di TOS, ma devono essere utilizzati solo per escludere altre condizioni che possono mimare quadri di TOS neurogenico. Conclusione: la letteratura disponibile non sembra supportare l’utilizzo dei test clinici per la diagnosi di TOS. Al fine di migliorare la ricerca futura, dovrebbero essere introdotti criteri diagnostici univocamente accettati per aiutare nella diagnosi, oltre a ben definite linee guida per il reporting, al fine di creare omogeneità tra gli studi, come suggerito dal comitato della Società di Chirurgia Vascolare.