Antibacterial Activity of Extracellular Products from Cyanobacteria.

Cyanobacteria are photosynthetic prokaryotes that can be found in freshwater and marine environments as well as in soil. These organisms produce a variety of different biologically active compounds exhibiting anti-bacterial, anti-fungal and anti-cancer properties among others. In this study, cyanobacterial isolates were screened for their ability to produce extracellular antibacterial products. Cyanobacteria were isolated from fresh water and soil samples collected in the Pembroke Pines, FL area. Twenty- seven strains of cyanobacteria were isolated belonging to the following genera: Limnothrix, Nostoc, Fischerella, Anabaena, Pseudoanabaena, Lyngbya, Leptolyngbya, Tychonema, and Calothrix. Individual strains were grown in liquid culture in laboratory conditions. Following 14-day cultivation, the culture liquid was filtered and tested for activity against the following bacteria: Escherichia coli, Bacillus megatarium, Staphylococcus aureus, and Micrococcus luteus. Among all genera of cyanobacterial strains tested, Fischerella exhibited the greatest inhibitory activity. An attempt was made to isolate the active compound from the culture liquid of the active strains. Lipophilic extracts from culture liquid were obtained from three selected Fischerella strains. The extracts proved to have varying levels of activity against the tested bacteria. Inhibitory activity from all three Fischerella strains was detected against B. megatarium and M luteus. The only strain that was active against S. aureus was Fischerella sp. 114-12 while none of the extracts showed activity against E. coli. This kind of screening has potential pharmaceutical and agricultural benefits, including possible discovery of novel antibiotics.

Estudo de um compósito Nb-15%pCu obtidos por moagem de alta energia e sinterizados por fase líquida

There is great difficulty in forming a composite refractory metal niobium with copper. This is due to the fact that Nb-Cu system is almost mutually immiscible and may be neglected solubility between them. These properties hinder or prevent obtaining homogeneous and high-density structures, conventionally prepared. This study aims to analyze the use of high-energy milling process (MAE) to implement these natural difficulties, with regard to the densification of the sintered bodies. The MAE and the press were used in the preparation of powders, to obtain a fine and homogeneous distribution of the grain size. Four loads Nb and Cu powders containing 15% by weight of Cu were then milled for MAE in a planetary type ball mill under various milling times and speeds. The results obtained by MAE were analyzed by scanning electron microscopy (SEM), according to the parameters of time and grinding speed. The samples were compacted under pressure of 200 MPa, were then sintered in liquid phase in a vacuum furnace at temperatures of 1100 ° C / 60 min and 1200 ° C / 60 min. Then it was used to characterize diffraction of X-rays to identify the phases. The microstructures of the sintered samples were observed and evaluated using scanning electron microscopy (SEM). Vickers Microhardness tests were performed, obtaining higher values for the sintered bodies in the largest of the post milling times and the larger grinding speeds. It was found that the liquid phase sintering of the samples that were processed by MAE produced at the end of a homogeneous and densified structure in 77,4% relative to the value of the theoretical density of the composite

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

An experimental and modelling study of the capture of CO2 from gas mixtures with different techniques, with focus on multicomponent effects.

In the present work, the deviations in the solubility of CO2, CH4, and N2 at 30 °c in the mixed gases (CO2/CH4) and (CO2/N2) from the pure gas behavior were studied using the dual-mode model over a wide range of equilibrium composition and pressure values in two glassy polymers. The first of which was PI-DAR which is the polyimide formed by the reaction between 4, 6-diaminoresorcinol dihydrochloride (DAR-Cl) and 2, 2’-bis-(3, 4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA). The other glassy polymer was TR-DAR which is the corresponding thermally rearranged polymer of PI-DAR. Also, mixed gas sorption experiments for the gas mixture (CO2/CH4) in TR-DAR at 30°c took place in order to assess the degree of accuracy of the dual-mode model in predicting the true mixed gas behavior. The experiments were conducted on a pressure decay apparatus coupled with a gas chromatography column. On the other hand, the solubility of CO2 and CH4 in two rubbery polymers at 30⁰c in the mixed gas (CO2/CH4) was modelled using the Lacombe and Sanchez equation of state at various values of equilibrium composition and pressure. These two rubbery polymers were cross-linked poly (ethylene oxide) (XLPEO) and poly (dimethylsiloxane) (PDMS). Moreover, data about the sorption of CO2 and CH4 in liquid methyl dietahnolamine MDEA that was collected from literature65-67 was used to determine the deviations in the sorption behavior in the mixed gas from that in the pure gases. It was observed that the competition effects between the penetrants were prevailing in the glassy polymers while swelling effects were predominant in the rubbery polymers above a certain value of the fugacity of CO2. Also, it was found that the dual-mode model showed a good prediction of the sorption of CH4 in the mixed gas for small pressure values but in general, it failed to predict the actual sorption of the penetrants in the mixed gas.

Age determination of sediment core NP90-52 (Table 1)

Data on glacial erosion have been compiled and synthesised using a wide range of sediment budget and sediment yield studies from the Svalbard-Barents Sea region. The data include studies ranging in timescale from 1 to 10**6 yr, and in size of drainage basin from 101 to 105 km**2. They show a clear dependence of sediment yield on the mode of glacierization. Polar glaciers erode at rates comparable to those found in Arctic fluvial basins, or about 40 t/km**-2/ yr or 0.02 mm/yr. In contrast, rates of erosion by polythermal glaciers are 800-1000 t/km**2/ yr (or ca 0.3-0.4 mm/yr), while rates from fast-flowing glaciers are slightly more than twice this: 2100 t/km**2/yr (or 1 mm/yr). Similar rates are also found for large glacierized basins like those in the southwestern parts of the Barents Sea. In contrast to the situation in fluvial basins, in which sediment yield typically decreases with increasing basin size, the tendency in glacierized basins is for erosion to be independent of basin size. In studies of sediment yield from glaciers it is sometimes difficult to distinguish between material actually dislodged from the bedrock by glaciers and material dislodged by other processes in interglacial times and simply transported to a depocenter by a glacier. Our data suggest that pulses of sediment resulting from advance of a glacier over previously-dislodged material last on the order of 10**3 yr, and result in inferred erosion rates that are approximately 25% higher than long-term average rates of glacial erosion. The maximum sediment fluxes from the large Storfjorden and Bear Island drainage basins occurred in mid-Pleistocene. The onset of this period of high sediment yield coincided with the onset of the 100 kyr glacial cycle. We presume that this was the beginning of a period of increased glacial activity, but one in which glaciers still advanced and retreated frequently. During the last two to four 100 kyr cycles, however, sediment yields appear to have decreased. This decrease may be the result of the submergence of the Barents Sea. Glacier erosion would be much higher for a subaerial Barents Sea setting than it would be for a present day subsea Barents Sea. A classical question in Quaternary Geology is whether glaciers are more erosive than rivers. We surmise that if factors such as the lithology and the available potential energy (mgh) of the precipitation falling at a given altitude, whether in liquid or solid form, are held constant, then glaciers are vastly more effective agents of erosion than rivers.

Caracterização funcional da BaltMTx, uma miotoxina isolada da peçonha de Bothrops alternatus

CHAPTER II: Snake venoms are a complex mixture of organic and inorganic compounds, proteins and peptides such as aminotransferases, acetylcholinesterase, hyaluronidases, L-amino acid oxidase, phospholipase A2, metalloproteases, serine proteases, lectins, disintegrins, and others. Phospholipase A2 directly or indirectly influence the pathophysiological effect on envenomation, as well as their participation in the digestion of the prey. They have several other activities such as hemolytic indirect action, cardiotoxicity, aggregating of platelets, anticoagulant, edema, myotoxic and inflammatory activities. In this work, we describe the functional characterization of BaltMTx, a PLA2 from Bothrops alternatus that inhibits platelet aggregation and present bactericidal effect. The purification of BaltMTx was carried out through three chromatographic steps (ion-exchange on a DEAE-Sephacel column, followed by hydrophobic chromatography on Phenyl–Sepharose and affinity chromatography on HiTrap™ Heparin HP). The protein was purified to homogeneity as judged by its migration profile in SDS–PAGE stained with coomassie blue, and showed a molecular mass of about 15 kDa under reducing conditions and approximately 25 kDa in non-reducing conditions. BaltMTx showed a rather specific inhibitory effect on platelet aggregation induced by epinephrine in human platelet-rich plasma in a dose-dependent manner, whereas it had little or no effect on platelet aggregation induced by collagen or adenosine diphosphate. BaltMTx also showed antibacterial activity against Staphylococcus aureus and Escherichia coli. High concentrations of BatlMTx stimulated the proliferation of Leishmania (Leishmania) infantum and Leishmania (Viania) braziliensis. BaltMTx induced production of inflammatory mediators such as IL-10, IL-12, TNF-α and NO. BaltMTx could be of medical interest as a new tool for the development of novel therapeutic agents for the prevention and treatment of thrombotic disorders as well as bactericidal agent.

First detection of the Sunyaev Zel'dovich effect increment at λ < 650 μm

The Sunyaev-Zel'dovich (SZ) effect is a spectral distortion of the cosmic microwave background as observed through the hot plasma in galaxy clusters. This distortion is a decrement in the CMB intensity for λ > 1.3 mm, an increment at shorter wavelengths, and small again by λ ~ 250 μm. As part of the Herschel Lensing Survey (HLS) we have mapped 1E0657–56 (the Bullet cluster) with SPIRE with bands centered at 250, 350 and 500 μm and have detected the SZ effect at the two longest wavelengths. The measured SZ effect increment central intensities are ΔI_0 = 0.097 ± 0.019 MJy sr^-1 at 350 μm and ΔI_0 = 0.268 ± 0.031 MJy sr^-1 at 500 μm, consistent with the SZ effect spectrum derived from previous measurements at 2 mm. No other diffuse emission is detected. The presence of the finite temperature SZ effect correction is preferred by the SPIRE data at a significance of 2.1σ, opening the possibility that the relativistic SZ effect correction can be constrained by SPIRE in a sample of clusters. The results presented here have important ramifications for both sub-mm measurements of galaxy clusters and blank field surveys with SPIRE.

International Capital Flows and Monetary Policy Spillovers

This dissertation examines the drivers and implications of international capital flows. The overarching motivation is the observation that countries not at the centre of global financial markets are subject to considerable spillovers from centre countries, notably from their monetary policy. I present new empirical evidence on the determinants of the observed patterns of international capital flows and monetary policy spillovers, and study their effect on both financial markets and the real economy. In Chapter 2 I provide evidence on the determinants of a puzzling negative correlation observed between productivity growth and net capital inflows to developing and emerging market economies (EMEs) since 1980. By disaggregating net capital inflows into their gross components, I show that this negative correlation is explained by capital outflows related to purchases of very liquid assets from the fastest growing countries. My results suggest a desire for international portfolio diversification in liquid assets by fast growing countries is driving much of the original puzzle. In the reminder of my dissertation I pivot to study the foreign characteristics that drive international capital flows and monetary policy spillovers, with a particular focus on the role of unconventional monetary policy in the United States (U.S.). In Chapter 3 I show that a significant portion of the heterogeneity in EMEs' asset price adjustment following the quantitative easing operations by the Federal Reserve (the Fed) during 2008-2014 can be explained by the degree of bilateral capital market frictions between these countries and the U.S. This is true even after accounting for capital controls, exchange rate regimes, and domestic monetary policies. Chapter 4, co-authored with Michal Ksawery Popiel, studies unconventional monetary policy in a small open economy, looking specifically at the case of Canada since the global financial crisis. We quantify the effect Canadian unconventional monetary policy shocks had on the real economy, while carefully controlling for and quantifying spillovers from U.S. unconventional monetary policy. Our results indicate that the Bank of Canada's unconventional monetary policy increased Canadian output significantly from 2009-2010, but that spillovers from the Fed's policy were even more important for increasing Canadian output after 2008.

Étude de la toxicité causée par le gène C9orf72 dans la Sclérose Latérale Amyotrophique

La Sclérose Latérale Amyotrophique (SLA) est une maladie neurodégénérative qui affecte les neurones moteurs. 10% des cas sont des cas familiaux et l’étude de ces familles a mené à la découverte de plusieurs gènes pouvant causer la SLA, incluant SOD1, TARDBP et FUS. L’expansion de la répétition GGGGCC dans le gène C9orf72 est, à ce jour, la cause la plus connue de SLA. L’impact de cette expansion est encore méconnu et il reste à déterminer si la toxicité est causée par un gain de fonction, une perte de fonction ou les deux. Plusieurs gènes impliqués dans la SLA sont conservés entre le nématode Caenorhabditis elegans et l’humain. C. elegans est un vers transparent fréquemment utilisé pour des études anatomiques, comportementales et génétiques. Il possède une lignée cellulaire invariable qui inclue 302 neurones. Aussi, les mécanismes de réponse au stress ainsi que les mécanismes de vieillissement sont très bien conservés entre ce nématode et l’humain. Donc, notre groupe, et plusieurs autres, ont utilisé C. elegans pour étudier plusieurs aspects de la SLA. Pour mieux comprendre la toxicité causée par l’expansion GGGGCC de C9orf72, nous avons développé deux modèles de vers pour étudier l’impact d’une perte de fonction ainsi que d’un gain de toxicité de l’ARN. Pour voir les conséquences d’une perte de fonction, nous avons étudié l’orthologue de C9orf72 dans C. elegans, alfa-1 (ALS/FTD associated gene homolog). Les vers mutants alfa-1(ok3062) développent des problèmes moteurs causant une paralysie et une dégénérescence spécifique des neurones moteurs GABAergiques. De plus, les mutants sont sensibles au stress osmotique qui provoque une dégénérescence. D’autre part, l’expression de la séquence d’ARN contenant une répétition pathogénique GGGGCC cause aussi des problèmes moteurs et de la dégénérescence affectant les neurones moteurs. Nos résultats suggèrent donc qu’un gain de toxicité de l’ARN ainsi qu’une perte de fonction de C9orf72 sont donc toxiques pour les neurones. Puisque le mouvement du vers peut être rapidement évalué en cultivant les vers dans un milieu liquide, nous avons développé un criblage de molécules pouvant affecter le mouvement des vers mutants alfa-1 en culture liquide. Plus de 4 000 composés ont été évalués et 80 ameliore la mobilité des vers alfa-1. Onze molécules ont aussi été testées dans les vers exprimant l’expansion GGGGCC et huit diminuent aussi le phénotype moteur de ces vers. Finalement, des huit molécules qui diminent la toxicité causée par la perte de fonction de C9orf72 et la toxicité de l’ARN, deux restaurent aussi l’expression anormale de plusieurs transcrits d’ARN observée dans des cellules dérivées de patient C9orf72. Avec ce projet, nous voulons identifier des molécules pouvant affecter tous les modes de toxicité de C9orf72 et possiblement ouvrir de nouvelles avenues thérapeutiques

Catalizzatori polifunzionali per la sintesi di Metil Isobutil Chetone

In this work, we have examined the activity and selectivity of new catalysts for the single-stage production of methyl isobutyl ketone (MIBK, 4- methyl-2-pentanone) from acetone (both in liquid and gas phase), using a fixed bed reactor operated in the temperature range between 373 and 473 K. The main reaction pathways for the synthesis of MIBK from acetone are given in Fig.1. The first step is the self condensation of acetone to diacetone alcohol (DAA, 4-hydroxy-4-methyl-2-pentanone); the second step is the dehydration of DAA to mesityl oxide (MO, 4-methyl-3-penten-2-one); the final step is the selective hydrogenation of the carbon–carbon double bond of MO to form MIBK. The most commonly observed side reactions are over-condensations and unselective hydrogenations (also shown in Fig.1). Two types of catalysts were studied: i)Pd supported on MgO-SiO2 mixed oxides with ratio of Mg to Si, synthetized using Ohnishi’s method and ii)Pd supported on alumina doped with 5% or 10% of MgO. The different Mg-Si and Mg-Al catalysts were characterized by different techniques (XRD, BET, SEM, NH3-TPD and CO2-TPD) and tested under different conditions in the condensation of acetone to diacetone alcohol and its dehydration to mesityl oxide to enhance the activity. Palladium was chosen as metal component, and its hydrogenation activity was studied. A low hydrogenation activity negatively affects the acetone conversion and promotes the production of mesityl oxide. Hydrogenation conditions being too severe may favor the unwanted hydrogenation of acetone to 2-propanol and of MIBK to methyl isobutyl carbinol (MIBC, 4-methyl-2-pentanol) but this effect is less detrimental to the MIBK selectivity than an unsufficient hydrogenation activity.

Recuperação de componentes de metal duro por projeção térmica

The main objective of this work is the development of a hardmetal components (WC-6%Co) recovery method by thermal deposition process. The thermal deposition technique used was HVOF (high velocity oxygen-fuel). The HVOF enables depositions of thick coatings (100-500 µm) with low porosity levels, high hardness and excellent adhesion. Before deposition, hardmetal samples with different geometries (plates and cylinders) were finished in order to have different roughness. The influence of these parameters in adhesion was studied. After this step, different re-sintering temperatures were used, in order to determine which one allows to obtain the maxima densification, elements distribution and metallurgical bonding. The re-sintering promotes the densification of the coating, with an increase of its hardness and metallurgical bonding formation. The inclusion of an intermetallic layer was tested along with different layer parameters. In liquid phase sintering (1383 and 1455 ºC) a complete densification of the coating occurred, while a bonding between the substrate and the coating only partially happened. The results of SEM/EDS show low levels of porosity and a complete and uniform distribution of the elements of the alloy. The cylindrical samples without intermetallic layer showed the lowest level of porosity and best metallurgical bonding. When the substrate surface was polished (Ra = 0.05 mm) lower levels of porosity and greater metallurgical bonding were found for both geometries. Taking into account the results obtained in this study, we can conclude that the implementation of this process is appropriate for cylindrical components with a polished surface. In these components the intermetallic layer is unnecessary and punctual defects like pores can be repaired with this process.

Enraizamento de mini-estacas de jabuticabeiras, pitangueira, araçazeiro amarelo e sete capoteiro

The most native fruit trees are belonging to Myrtaceae family, which it have as main marketing potential their fruit. Despite the wide acceptance of the fruits of these native fruit cultura, the establishment of commercial orchards is still necessary, because if it prevails extraction in the forest. To start the cultivo in the orchard, the first point is on the mother plant choice, which should provide superior characteristics when compared to other genotypes. Then, it is necessary to choose the method to can produce satisfactory amount of seedlings and preferably without it to lose the mother plant characteristics. For this, it adopts the asexual thechniques, with option for grafting, cuttings and air layering. These techniques when tested with native fruits tree, it proved limiting in theses results, with this, it should to test other it to recommend its use, especially, those fruit native of higher potential as jabuticaba tree, pitanga tree, sete capote tree and araça amarelo tree. The aim of this study was to test the use of asexual propagation through mini-cuttings in these native fruit trees, according to the time of collection, the mini-cutting length and concentration of IBA, as well as, it to relate the results of rooting with tryptophan extracted at certain times. The work was carried out at Universidade Tecnológica Federal do Paraná – Câmpus Dois Vizinhos, Brazil. The samples were collected each two months. The mini-cutting were prepared with 6 or 8 cm, with a pair of leaves reduced to 25% of the original size. The mini-cuttings had their base immersed in liquid solution of indole-butyric acid (IBA) in the concentrations of 0, 3000 and 6000 mg L-1 and then were placed in tubes containing commercial substrate. The experimental design was completely randomized with factorial 2 x 3 x 6 (mini-cutting length x IBA concentration x time of collection), with four replications, it being each plot varied according to the amount of shoots obtained by period time. After 120 days, the rooting and callus formation (%), average number of roots per mini-cutting and the average length of the roots were evaluated. After 60 days of these evaluations, the survival of mini-cuttings rooted after transplant was evaluated. It was evaluated also the production of mini-cuttings of each size in each period time. At the end of the experiment it was evaluated the percentage of survival of mother plantlets. For analysis of tryptophan was used materials branches, leaves and twigs with leaves, taken from the materials used for the production of mini-cutting. It was recommended for hybrid jabuticaba tree the use mini-cutting with eight cm, treated with 6000 mg L-1 of IBA and collected in June. For jabuticaba tree of cabinho and araça amarelo tree the period for propagation by mini-cuttings should be in August, regardless of IBA concentration and length of the mini-cutting. In the jabuticaba tree sabara and sete capote tree is important to obtain more satisfactory results realized the collect in October or December, with the same independence of other levels tested in other factors. However, for sete capote tree should test other techniques to increase the efficiency of propagation. And with pitanga tree recommended to the collection in June, but with 6cm the application of 3000 mg L-1 of IBA and 8 cm with 6000 mg L-1 of IBA.

Recuperação de carotenóides microbianos por diferentes técnicas de ruptura celular

O objetivo deste trabalho foi utilizar diferentes técnicas químicas (dimetilsulfóxido, ácido clorídrico, acético e lático), técnicas mecânicas (banho ultrassônico, abrasão com pérolas de vidro, maceração com terra diatomácea, ruptor ultrassônico e imersão em nitrogênio líquido) e técnica enzimática (preparado enzimático comercial Glucanex®) para a recuperação de carotenoides a partir da ruptura da parede celular das leveduras Sporidiobolus pararoseus e Rhodotorula mucilaginosa isoladas de amostras ambientais. Para isso a obtenção de biomassa foi realizada através de cultivos submersos no meio YM, a 25 °C, 180 rpm por 168 h. Para a ruptura celular, a operação de congelamento da biomassa (-18°C por 48 h) foi estudada. Os métodos de secagem convencional por ar forçado (35°C/48h) e liofilização (-80°C/48h, em ultrafreezer, seguido de liofilizador até alcançar 2% de umidade da amostra) também foram avaliados. Nas técnicas químicas aplicadas, o dimetilsulfóxido apresentou os melhores resultados para as duas leveduras, porém o seu uso é limitado devido a sua toxicidade. Para S. pararoseus, os maiores valores encontrados foram para o ácido clorídrico, seguido do acético e do lático, sendo detectada diferença entre eles quando aplicado o congelamento. Com R. mucilaginosa, os maiores valores foram encontrados para os ácidos acético e lático, seguido do ácido clorídrico, no qual o congelamento da biomassa também não influenciou a recuperação dos carotenoides. Dentre as técnicas mecânicas estudadas, para a levedura S. pararoseus, o banho ultrassônico e a abrasão com pérolas de vidro apresentaram os resultados mais promissores comparados ao DMSO (84,79±2,34 e 76,87±2,06 μg/g respectivamente), onde o processo de congelamento da biomassa não influenciou positivamente no percentual de extratibilidade e na concentração específica dos carotenoides quando utilizada estas técnicas. Com Rhodotorula mucilaginosa, o banho ultrassônico propiciou a recuperação da maior concentração específica de carotenoides (193,5±25,8 μg/g), sendo que o processo de congelamento também não influenciou positivamente no percentual de extratibilidade e na concentração específica dos carotenoides. Através do Delineamento Central Composto Rotacional (DCCR) 23 foi possível avaliar que a levedura S. pararoseus não demonstrou nenhum efeito sob as variáveis pH, temperatura e concentração de enzima. Assim, a melhor condição de trabalho escolhida foi pH 7,4, 30 ºC e concentração de enzima de 1,0 g/gcs, onde apresentou a concentração específica de 42,6 μg/g e volumétrica de 308 μg/L de carotenoides. Para R. mucilaginosa, a condição ótima foi definida como 1,0 g/gcs, pH 5,0 e temperatura de 30 ºC, onde foi encontrado 115,1±8,1 μg/g e 470,1±38,8 μg/L para a concentração específica e volumétrica de carotenoides, respectivamente. A utilização de técnicas combinadas empregando banho ultrassônico e lise enzimática não proporcionou melhorias nos resultados para ambas as leveduras. A liofilização provocou um ganho de 20% e 13,7% na concentração específica dos carotenoides das leveduras S. pararoseus e R. mucilaginosa, respectivamente, onde o congelamento da biomassa não influenciou significativamente (p<0,05) a recuperação de carotenoides provenientes das duas leveduras, podendo ser eliminada do processo. Assim, para S. pararoseus o banho ultrassônico e as pérolas de vidro apresentaram os melhores resultados na recuperação de carotenoides, e para R. mucilaginosa o melhor resultado foi alcançado com o banho ultrassônico.

Valorisation of fish-cannery by-products targeting the recovery of ω3 lipids

Over the past years, ω3 fatty acids, namely EPA and DHA, have been recognized as presenting multiple health benefits. Several studies consider fish oil as the most important source of EPA and DHA. Nowadays, canned fish industry plays a very important role in Portuguese economy. However, expansion of this business brought some environmental concerns due to the high amount of by-products generated. Nevertheless, this problem can be substantially reduced by the recovery of some of the by-product components, diminishing its contamination load and simultaneously obtaining value-added products. This study was born from the growing interest in obtaining new sources of lipids rich in ω3 fatty acids, combined with environmental concerns related to the production of wastes from the fish canning industries, rich in these compounds. It thus intends to evaluate lipid extraction methods in liquid by-products from the fish canning industry, aiming to obtain fractions rich in ω3 fatty acids. Additionally, in a biorefining concept, the protein content of the remaining aqueous fractions was also quantified.