Algunas resoluciones relacionadas con el examen y la eficiencia del funcionamiento administrativo y financiero de las Naciones Unidas = Selected resolutions concerning the review of the efficiency of the administrative and financial functioning of the United Nations = Résolutions portant sur l'examen de l'efficacité du fonctionnement administratif et financier de l'organisation des Nations Unies

Contiene las resoluciones 40/237 y 41/213 de la Asamblea General y la resolución 1987/112 del Consejo Económico y Social, sobre el funcionamiento administrativo y financiero de las Naciones Unidas.

Synthesis, characterization, x-ray structure, DNA cleavage, and cytotoxic activities of palladium(ii) complexes of 4-phenyl-3-thiosemicarbazide and triphenylphosphane

Complexes of the type [PdX(PPh3)(1)]X [1 = 4-phenyl-3- thiosemicarbazide; X = Cl- (2), Br- (3), I- (4), and SCN- (5)] have been synthesized and characterized by elemental analyses and IR, UV/Vis, and 1H and 13C NMR spectroscopy. The molecular structure of complex 4 was determined by single-crystal X-ray diffraction. The binding of the complexes with a purine base (guanosine) was investigated by 1H NMR spectroscopy and mass spectrometry, which showed the complexes to coordinate to guanosine through N7. A gel electrophoresis assay demonstrated the ability of 2-5 to cleave DNA plasmid. All the complexes were tested in vitro by means of the MTT assay for their cytotoxicity against two murine cell lines, LM3 (mammary adenocarcinoma) and LP07 (lung adenocarcinoma), and compared with cisplatin. Complexes 2-5 exhibited good cytotoxicity that surpasses that of cisplatin in the case of LM3. A series of thiosemicarbazide/phosphane palladium(II) complexes have been synthesized and fully characterized. These complexes are able to cleave DNA plasmid and show cytotoxicity against adenocarcinoma (mammary LM3 and lung LP07), surpassing the cytotoxicity of cisplatin in the case of LM3. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synthesis, cytotoxic activity and DNA interaction of Pd(II) complexes bearing N′-methyl-3,5-dimethyl-1-thiocarbamoylpyrazole

A new series of complexes of general formulae [PdX2(tmdmPz)] {X = Cl (1), Br (2), I (3), SCN (4); tmdmPz = N′-methyl-3,5-dimethyl-1- thiocarbamoylpyrazole} have been synthesized and characterized by elemental analysis, molar conductivities, IR, 1H and 13C{ 1H} NMR spectroscopy. In these complexes, the tmdmPz coordinates to Pd(II) center as a neutral N,S-chelating ligand. The geometries of the complexes have been optimized with the DFT method. Cytotoxicity evaluation against LM3 (mammary adenocarcinoma) and LP07 (lung adenocarcinoma) cell lines indicated that complexes 1-4 were more active than cisplatin. The binding of the complexes with a purine base (guanosine) was investigated by 1H NMR and mass spectrometry, showing that the coordination of guanosine occurs through N7. Electrophoretic DNA migration studies showed that all of them modify the DNA tertiary structure. © 2013 Elsevier Ltd. All rights reserved.

Biosorption of cadmium (II) and lead (II) from aqueous solution using exopolysaccharide and biomass produced by Colletotrichum sp.

The biosorption of Cd(II) and Pb(II) ions on biomass and exopolysaccharide (EPS) produced by Colletotrichum sp. fungus has been investigated as a function of contact time, initial pH, initial metal ion concentration, and initial adsorbent concentration in a batch system. Adsorption equilibrium was described by Freundlich and Langmuir isotherms. Adsorption was characterized through granulometry, SEM and EDX analysis. Then, studies were performed to regenerate the adsorbent. Biosorption of metals by biomass and EPS were best described by the Langmuir and Freundlich isotherm, respectively. Results of thermodynamic investigations showed that adsorption reactions were spontaneous (ΔG° < 0), exothermal, and mainly physical. The EPS was able to remove 79 and 98% of cadmium and lead, respectively, and the biomass removed 85 and 84% of cadmium and lead, respectively, in a solution with initial concentration 100 mg L-1, and the four adsorption-desorption cycles of all adsorbents showed up with great regenerative capacity and relative stability after these four cycles, the high potential of these biological materials in sorption has been shown. © 2013 Copyright Balaban Desalination Publications.

Antitumour and anti-inflammatory effects of palladium(II) complexes on Ehrlich tumour

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

El efecto de los subsidios, la reglamentación y las diversas formas de propiedad en la calidad y eficacia operativa de los servicios del transporte urbano en América Latina = The impacts of subsidies, regulation, and different forms of ownership on the service quality and operational efficiency of urban bus systems in Latin America

Incluye Bibliografía

Strategies to improve the efficiency of genomic selection in animal breeding programs

Pós-graduação em Zootecnia - FCAV

Genetic variability and efficiency of DNA microsatellite markers for paternity testing in horse breeds from the Brazilian Marajó archipelago

In this study, 15 microsatellite DNA loci used in comparative tests by the International Society for Animal Genetics were applied to the evaluation of genetic diversity and management, and the efficiency of paternity testing in Marajoara horses and Puruca ponies from the Marajó Archipelago. Based on the genotyping of 93 animals, mean allelic diversity was estimated as 9.14 and 7.00 for the Marajoara and Puruca breeds, respectively. While these values are similar to those recorded in most European breeds, mean levels of heterozygosity were much lower (Marajoara 49%, Puruca 40%), probably as a result of high levels of inbreeding in the Marajó populations. The mean informative polymorphic content of this 15-marker system was over 50% in both breeds, and was slightly higher in the Marajoara horses. The discriminative power and exclusion probabilities derived from this system were over 99% for both populations, emphasizing the efficacy of these markers for paternity testing and genetic management in the two breeds.

Obtenção e caracterização de carvão ativado de caroço de buriti (Mauritia flexuosa L. f.) para avaliar o processo de adsorção de uma solução de Cu (II)

Produziu-se carvão de caroço de buriti (CCB) a partir do rejeito da produção artesanal do fruto, destinado à extração de óleo, à temperatura de 400ºC. O CCB então foi ativado a temperaturas de 800ºC e 900ºC. Ensaios de adsorção foram executados para se avaliar o desempenho dessas temperaturas de ativação na adsorção de uma solução de cobre (II) de concentração inicial conhecida de 50 mg/L. Após a análise dos resultados, decidiu-se pela ativação do carvão a 900ºC. Caracterizou-se o carvão ativado do caroço de buriti (CACB) a 900ºC de acordo com as propriedades comerciais, tais como: área específica, porosimetria, densidades aparente e real, porosidade de um leito fixo, microscopia eletrônica de varredura, conteúdo de cinzas, pH, umidade, carbono fixo e grupos funcionais de superfície ácida presentes no CACB. Realizaram-se ensaios de equilíbrio de adsorção para se determinar a influência do diâmetro das partículas de CACB (D < 0,595 mm; 0,595 < D < 1,19 mm e D > 1,19 mm); a influência do tempo de contato adsorvente/adsorvato (15, 30, 60, 120, 180, 240 e 300 minutos); a influência do pH (3,00; 4,01; 5,18 e 6,00) e a influência da concentração inicial da solução de cobre (II) (5, 10, 30, 50, 80, 100 e 200 mg/L) para se avaliar a eficiência de remoção. Os resultados mostraram uma maior eficiência de remoção de cobre (II) para o diâmetro D < 0,595 mm; para o tempo de contato de 300 minutos; para o pH de 4,01 e para as concentrações iniciais de cobre (II) de 50 e 80 mg/L. Os modelos matemáticos de Langmuir e Freundlich foram aplicados para os dados de equilíbrio de adsorção. O modelo matemático de Langmuir foi o que melhor se ajustou aos dados de equilíbrio. De acordo com os dados da cinética de equilíbrio, observa-se que a partir do tempo de contato de 15 minutos todas as concentrações de equilíbrio ficaram abaixo do máximo permitido de 1,0 mg/L previsto pela legislação CONAMA nº 357/2005 para lançamento de efluentes em corpos receptores. Os resultados experimentais encontrados são indicativos de que é possível a remoção de cobre (II) de efluentes industriais utilizando CACB ativado fisicamente a 900ºC por um período de 60 minutos.

Obtenção e caracterização de carvão ativado de caroço de buriti (Mauritia flexuosa L. f.) para a avaliação do processo de adsorção de cobre (II)

Na região amazônica, algumas indústrias despejam cobre nos corpos receptores que, em elevadas concentrações, é tóxico para os seres vivos. A remoção de cobre de efluentes industriais é realizada por diversos processos como a adsorção. Neste trabalho mostrou-se o resultado da adsorção de cobre (II) em carvão ativado de caroço de buriti carbonizado a 400 °C e ativado a 900 °C. O carvão ativado foi caracterizado em termos de área específica, tamanho dos poros, densidades aparente e real, porosidade, microscopia eletrônica de varredura, conteúdo de cinzas, pH, umidade, carbono fixo e grupos funcionais de superfície. O estudo de equilíbrio de adsorção avaliou a influência do diâmetro das partículas do carvão, do tempo de contato adsorvente/adsorbato, do pH e da concentração inicial da solução de cobre (II) sobre a remoção de cobre (II). Com base nos resultados, concluiu-se que há uma maior eficiência de remoção de cobre (II) para diâmetro < 0,595 mm, tempo de contato de 300 minutos, pH 4,0 e concentrações iniciais de cobre (II) de 50 e 80 mg L^-1. O modelo matemático de Langmuir foi o que melhor se ajustou aos dados de equilíbrio de adsorção. A partir do tempo de contato de 15 minutos todas as concentrações de equilíbrio ficaram abaixo do máximo permitido de 1,0 mg L^-1 previsto pela legislação vigente para lançamento de efluentes em corpos receptores.

Cytotoxic study of organometallic compounds of palladium (II) in mice peritoneal macrophages

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Energetic efficiency of an agricultural tractor in function of tire inflation pressure

The tire inflation pressure, among other factors, determines the efficiency in which a tractor can exert traction. It was studied the effect of using two tire inflation pressures, 110.4 kPa in the front and rear wheels, 124.2 kPa in the front wheel and 138 kPa in the rear wheels, the energetic efficiency of an agricultural tractor of 147 kW of engine power, in the displacement speed of 6.0 km.h-1, on track with firm surface, with the tractor engine speed of 2000 rpm. For each condition of the tire pressure, the tested tractor was subjected to constant forces in the drawbar of 45 kN and 50 kN, covering 30 meters. It was used a randomized complete block with a 2x2 factorial arrangement (tire pressure and drawbar power) with four replications, totaling 16 experimental units. Data were subjected to analysis of variance, using the Tukey test at 5% probability for comparison averages. The lowest hourly and specific fuel consumption, the lowest slippage of the wheelsets and the highest efficiency in the drawbar was obtained with the tire inflation pressure of 110.4 kPa in the front and rear tires of the tractor, highlighting that lower pressures improve energetic and operational performance of the tractor.

Mandibular growth and dentoalveolar development in the treatment of Class II, division 1, malocclusion using Balters Bionator according to the skeletal maturation

OBJECTIVE: The purpose of the study was to evaluate the influence of the skeletal maturation in the mandibular and dentoalveolar growth and development during the Class II, division 1, malocclusion correction with Balters bionator. METHODS: Three groups of children with Class II, division 1, malocclusion were evaluated. Two of them were treated for one year with the bionator of Balters appliance in different skeletal ages (Group 1: 6 children, 7 to 8 years old and Group 2: 10 children, 9 to 10 years old) and the other one was followed without treatment (Control Group: 7 children, 8 to 9 years old). Lateral 45 degree cephalometric radiographs were used for the evaluation of the mandibular growth and dentoalveolar development. Tantalum metallic implants were used as fixed and stable references for radiograph superimposition and data acquisition. Student's t test was used in the statistical analysis of the displacement of the points in the condyle, ramus, mandibular base and dental points. Analysis of variance one-fixed criteria was used to evaluate group differences (95% of level of significance). RESULTS: The intragroup evaluation showed that all groups present significant skeletal growth for all points analyzed (1.2 to 3.7 mm), but in an intergroup comparison, the increment of the mandibular growth in the condyle, ramus and mandibular base were not statically different. For the dentoalveolar modifications, the less mature children showed greater labial inclination of the lower incisors (1.86 mm) and the most mature children showed greater first permanent molar extrusion (4.8 mm).