Contribución al estudio de propiedades ópticas en medios heterogéneos

Como contribución del estudio de medios heterogéneos, esta tesis recoge el trabajo llevado a cabo sobre modelado teórico y simulación del estudio de las propiedades ópticas de la piel y del agua del mar, como ejemplos paradigmáticos de medios heterogéneos. Se ha tomado como punto de partida el estudio de la propagación de la radiación óptica, más concretamente de la radiación láser, en un tejido biológico. La importancia de la caracterización óptica de un tejido es fundamental para manejar la interacción radiación-tejido que permite tanto el diagnóstico como la terapéutica de enfermedades y/o de disfunciones en las Ciencias de la Salud. Sin olvidar el objetivo de ofrecer una metodología de estudio, con un «enfoque ingenieril», de las propiedades ópticas en un medio heterogéneo, que no tiene por qué ser exclusivamente el tejido biológico. Como consecuencia de lo anterior y de la importancia que tiene el agua dentro de los tejidos biológicos se decide estudiar en otro capítulo las propiedades ópticas del agua dentro de un entorno heterogéneo como es el agua del mar. La selección del agua del mar, como objeto de estudio adicional, es motivada, principalmente, porque se trata de un sistema heterogéneo fácilmente descriptible en cada uno de sus elementos y permite evaluar una amplia bibliografía. Además se considera que los avances que han tenido lugar en los últimos años en las tecnologías fotónicas van a permitir su uso en los métodos experimentales de análisis de las aguas. El conocimiento de sus propiedades ópticas permite caracterizar los diferentes tipos de aguas de acuerdo con sus compuestos, así como poder identificar su presencia. Todo ello abre un amplio abanico de aplicaciones. En esta tesis doctoral, se ha conseguido de manera general: • Realizar un estudio del estado del arte del conocimiento de las propiedades ópticas de la piel y la identificación de sus elementos dispersores de la luz. • Establecer una metodología de estudio que nos permita obtener datos sobre posibles efectos de la radiación en los tejidos biológicos. •Usar distintas herramientas informáticas para simular el transporte de la radiación laser en tejidos biológicos. • Realizar experimentos mediante simulación de láser, tejidos biológicos y detectores. • Comparar los resultados conocidos experimentalmente con los simulados. • Estudiar los instrumentos de medida de la respuesta a la propagación de radiación laser en tejidos anisotrópicos. • Obtener resultados originales para el diagnóstico y tratamiento de pieles, considerando diferente razas y como alteración posible en la piel, se ha estudiado la presencia del basalioma. • Aplicación de la metodología de estudio realizada en la piel a la simulación de agua de mar. • Obtener resultados originales de simulación y análisis de cantidad de fitoplancton en agua; con el objetivo de facilitar la caracterización de diferentes tipos de aguas. La tesis doctoral se articula en 6 capítulos y 3 anexos perfectamente diferenciados con su propia bibliografía en cada uno de ellos. El primer capítulo está centrado en la problemática del difícil estudio y caracterización de los medios heterogéneos debidos a su comportamiento no homogéneo y anisotrópico ante las radiaciones ópticas. Así pues, presentaremos una breve introducción al comportamiento tanto de los tejidos como del océano ante radiaciones ópticas y definiremos sus principales propiedades: la absorción, el scattering, la anisotropía y los coeficientes de reflexión. Como continuación, un segundo capítulo trata de acercarnos a la resolución del problema de cómo caracterizar las propiedades ópticas descritas en el primer capítulo. Para ello, primero se introducen los modelos teóricos, en segundo lugar los métodos de simulación más empleados y, por último, enumerar las principales técnicas de medida de la propagación de la luz en los tejidos vivos. El tercer capítulo, centrado en la piel y sus propiedades, intenta realizar una síntesis de lo que se conoce sobre el comportamiento de la piel frente a la propagación de las radiaciones ópticas. Se estudian sus elementos constituyentes y los distintos tipos de pieles. Por último se describe un ejemplo de aplicación más inmediata que se beneficia de este conocimiento. Sabemos que el porcentaje de agua en el cuerpo humano es muy elevado, en concreto en la piel se considera de aproximadamente un 70%. Es obvio, por tanto, que conocer cómo afecta el agua en la propagación de una radiación óptica facilitaría el disponer de patrones de referencia; para ello, se realiza el estudio del agua del mar. En el cuarto capítulo se estudian las propiedades del agua del mar como medio heterogéneo de partículas. En este capítulo presentamos una síntesis de los elementos más significativos de dispersores en el océano, un estudio de su comportamiento individual frente a radiaciones ópticas y su contribución al océano en su conjunto. Finalmente, en el quinto capítulo se describen los resultados obtenidos en los distintos tipos de simulaciones realizadas. Las herramientas de simulación empleadas han sido las mismas tanto para el caso del estudio de la piel como para el agua del mar, por ello ambos resultados son expuestos en el mismo capítulo. En el primer caso se analizan diferentes tipos de agua oceánica, mediante la variación de las concentraciones de fitoplancton. El método empleado permite comprobar las diferencias que pueden encontrarse en la caracterización y diagnóstico de aguas. El segundo caso analizado es el de la piel; donde se estudia el comportamiento de distintos tipos de piel, se analizan para validar el método y se comprueba cómo el resultado es compatible con aplicaciones, actualmente comerciales, como la de la depilación con láser. Como resultado significativo se muestra la posible metodología a aplicar para el diagnóstico del cáncer de piel conocido como basalioma. Finalmente presentamos un capítulo dedicado a los trabajos futuros basados en experimentación real y el coste asociado que implicaría el llevarlo a cabo. Los anexos que concluyen la tesis doctoral versan por un lado sobre el funcionamiento del vector común de toda la tesis: el láser, sus aplicaciones y su control en la seguridad y por otro presentamos los coeficientes de absorción y scattering que hemos utilizado en nuestras simulaciones. El primero condensa las principales características de una radiación láser desde el punto de vista de su generación, el segundo presenta la seguridad en su uso y el tercero son tablas propias, cuyos parámetros son los utilizados en el apartado de experimentación. Aunque por el tipo de tesis que defiendo no se ajusta a los modelos canónicos de tesis doctoral, el lector podrá encontrar en esta tesis de forma imbricada, el modelo común a todas las tesis o proyectos de investigación con una sección dedicada al estado del arte con ejemplos pedagógicos para facilitar la compresión y se plantean unos objetivos (capítulos 1-4), y un capítulo que se subdivide en materiales y métodos y resultados y discusiones (capítulo 5 con sus subsecciones), para finalizar con una vista al futuro y los trabajos futuros que se desprenden de la tesis (capítulo 6). ABSTRACT As contribution to the study of heterogeneous media, this thesis covers the work carried out on theoretical modelling and simulation study of the optical properties of the skin and seawater, as paradigmatic examples of heterogeneous media. It is taken as a starting point the study of the propagation of optical radiation, in particular laser radiation in a biological tissue. The importance of optical characterization of a tissue is critical for managing the interaction between radiation and tissues that allows both diagnosis and therapy of diseases and / or dysfunctions in Health Sciences. Without forgetting the aim of providing a methodology of study, with "engineering approach" of the optical properties in a heterogeneous environment, which does not have to be exclusively biological tissue. As a result of this and the importance of water in biological tissues, we have decided to study the optical properties of water in a heterogeneous environment such as seawater in another chapter. The selection of sea water as an object of further study is motivated mainly because it is considered that the advances that have taken place in recent years in photonic technologies will allow its use in experimental methods of water analysis. Knowledge of the optical properties to characterize the different types of waters according to their compounds, as well as to identify its presence. All of this opens a wide range of applications. In this thesis, it has been generally achieved: • Conduct a study of the state of the art knowledge of the optical properties of the skin and identifying its light scattering elements. • Establish a study methodology that allows us to obtain data on possible effects of radiation on biological tissues. • Use different computer tools to simulate the transport of laser radiation in biological tissues. • Conduct experiments by simulating: laser, detectors, and biological tissues. • Compare the known results with our experimentally simulation. • Study the measuring instruments and its response to the propagation of laser radiation in anisotropic tissues. • Get innovative results for diagnosis and treatment of skin, considering different races and a possible alteration in the skin that we studied: the presence of basal cell carcinoma. • Application of the methodology of the study conducted in the skin to simulate seawater. • Get innovative results of simulation and analysis of amount of phytoplankton in water; in order to facilitate the characterization of different types of water. The dissertation is divided into six chapters and three annexes clearly distinguished by their own literature in each of them. The first chapter is focused on the problem of difficult study and characterization of heterogeneous media due to their inhomogeneous and anisotropic behaviour of optical radiation. So we present a brief introduction to the behaviour of both tissues at the cellular level as the ocean, to optical radiation and define the main optical properties: absorption, scattering, anisotropy and reflection coefficients. Following from this, a second chapter is an approach to solving the problem of how to characterize the optical properties described in the first chapter. For this, first the theoretical models are introduced, secondly simulation methods more used and, finally, the main techniques for measuring the propagation of light in living tissue. The third chapter is focused on the skin and its properties, tries to make a synthesis of what is known about the behaviour of the skin and its constituents tackle the spread of optical radiation. Different skin types are studied and an example of immediate application of this knowledge benefits described. We know that the percentage of water in the human body is very high, particularly in the skin is considered about 70%. It is obvious, therefore, that knowing how the water is affected by the propagation of an optical radiation facilitate to get reference patterns; For this, the study of seawater is performed. In the fourth chapter the properties of seawater as a heterogeneous component particles are studied. This chapter presents a summary of the scattering elements in the ocean, its individual response to optical radiation and its contribution to the ocean as a whole. In the fifth chapter the results of the different types of simulations are described. Simulation tools used were the same for the study of skin and seawater, so both results are presented in the chapter. In the first case different types of ocean water is analysed by varying the concentrations of phytoplankton. The method allows to check the differences that can be found in the characterization and diagnosis of water. The second case analysed is the skin; where the behaviour of different skin types are studied and checked how the result is compatible with applications currently trade, such as laser hair removal. As a significant result of the possible methodology to be applied for the diagnosis of skin cancer known as basal cell carcinoma is shown. Finally we present a chapter on future work based on actual experimentation and the associated cost which it would involve carrying out. The annexes conclude the thesis deal with one hand on the functioning of the common vector of the whole thesis: laser, control applications and safety and secondly we present the absorption and scattering coefficients we used in our simulations. The first condenses the main characteristics of laser radiation from the point of view of their generation, the second presents the safety in use and the third are own tables, whose parameters are used in the experimental section. Although the kind of view which I advocate does not meet the standard models doctoral thesis, the reader will find in this thesis so interwoven, the common model to all theses or research projects with a section on the state of the art pedagogical examples to facilitate the understanding and objectives (Chapters 1-4), and a chapter is divided into materials and methods and results and discussions (Chapter 5 subsections) arise, finishing with a view to the future and work future arising from the thesis (Chapter 6).

Query Rewriting Optimisation Techniques for Ontology-Based Data Access

Ontology-Based Data Access (OBDA) permite el acceso a diferentes tipos de fuentes de datos (tradicionalmente bases de datos) usando un modelo más abstracto proporcionado por una ontología. La reescritura de consultas (query rewriting) usa una ontología para reescribir una consulta en una consulta reescrita que puede ser evaluada en la fuente de datos. Las consultas reescritas recuperan las respuestas que están implicadas por la combinación de los datos explicitamente almacenados en la fuente de datos, la consulta original y la ontología. Al trabajar sólo sobre las queries, la reescritura de consultas permite OBDA sobre cualquier fuente de datos que puede ser consultada, independientemente de las posibilidades para modificarla. Sin embargo, producir y evaluar las consultas reescritas son procesos costosos que suelen volverse más complejos conforme la expresividad y tamaño de la ontología y las consultas aumentan. En esta tesis exploramos distintas optimizaciones que peuden ser realizadas tanto en el proceso de reescritura como en las consultas reescritas para mejorar la aplicabilidad de OBDA en contextos realistas. Nuestra contribución técnica principal es un sistema de reescritura de consultas que implementa las optimizaciones presentadas en esta tesis. Estas optimizaciones son las contribuciones principales de la tesis y se pueden agrupar en tres grupos diferentes: -optimizaciones que se pueden aplicar al considerar los predicados en la ontología que no están realmente mapeados con las fuentes de datos. -optimizaciones en ingeniería que se pueden aplicar al manejar el proceso de reescritura de consultas en una forma que permite reducir la carga computacional del proceso de generación de consultas reescritas. -optimizaciones que se pueden aplicar al considerar metainformación adicional acerca de las características de la ABox. En esta tesis proporcionamos demostraciones formales acerca de la corrección y completitud de las optimizaciones propuestas, y una evaluación empírica acerca del impacto de estas optimizaciones. Como contribución adicional, parte de este enfoque empírico, proponemos un banco de pruebas (benchmark) para la evaluación de los sistemas de reescritura de consultas. Adicionalmente, proporcionamos algunas directrices para la creación y expansión de esta clase de bancos de pruebas. ABSTRACT Ontology-Based Data Access (OBDA) allows accessing different kinds of data sources (traditionally databases) using a more abstract model provided by an ontology. Query rewriting uses such ontology to rewrite a query into a rewritten query that can be evaluated on the data source. The rewritten queries retrieve the answers that are entailed by the combination of the data explicitly stored in the data source, the original query and the ontology. However, producing and evaluating the rewritten queries are both costly processes that become generally more complex as the expressiveness and size of the ontology and queries increase. In this thesis we explore several optimisations that can be performed both in the rewriting process and in the rewritten queries to improve the applicability of OBDA in real contexts. Our main technical contribution is a query rewriting system that implements the optimisations presented in this thesis. These optimisations are the core contributions of the thesis and can be grouped into three different groups: -optimisations that can be applied when considering the predicates in the ontology that are actually mapped to the data sources. -engineering optimisations that can be applied by handling the process of query rewriting in a way that permits to reduce the computational load of the query generation process. -optimisations that can be applied when considering additional metainformation about the characteristics of the ABox. In this thesis we provide formal proofs for the correctness of the proposed optimisations, and an empirical evaluation about the impact of the optimisations. As an additional contribution, part of this empirical approach, we propose a benchmark for the evaluation of query rewriting systems. We also provide some guidelines for the creation and expansion of this kind of benchmarks.

Multiscale analysis of the mechanical behavior of needle-punched nonwoven fabrics

Los fieltros son una familia de materiales textiles constituidos por una red desordenada de fibras conectadas por medio de enlaces térmicos, químicos o mecánicos. Presentan menor rigidez y resistencia (al igual que un menor coste de procesado) que sus homólogos tejidos, pero mayor deformabilidad y capacidad de absorción de energía. Los fieltros se emplean en diversas aplicaciones en ingeniería tales como aislamiento térmico, geotextiles, láminas ignífugas, filtración y absorción de agua, impacto balístico, etc. En particular, los fieltros punzonados fabricados con fibras de alta resistencia presentan una excelente resistencia frente a impacto balístico, ofreciendo las mismas prestaciones que los materiales tejidos con un tercio de la densidad areal. Sin embargo, se sabe muy poco acerca de los mecanismos de deformación y fallo a nivel microscópico, ni sobre como influyen en las propiedades mecánicas del material. Esta carencia de conocimiento dificulta la optimización del comportamiento mecánico de estos materiales y también limita el desarrollo de modelos constitutivos basados en mecanismos físicos, que puedan ser útiles en el diseño de componentes estructurales. En esta tesis doctoral se ha llevado a cabo un estudio minucioso con el fin de determinar los mecanismos de deformación y las propiedades mecánicas de fieltros punzonados fabricados con fibras de polietileno de ultra alto peso molecular. Los procesos de deformación y disipación de energía se han caracterizado en detalle por medio de una combinación de técnicas experimentales (ensayos mecánicos macroscópicos a velocidades de deformación cuasi-estáticas y dinámicas, impacto balístico, ensayos de extracción de una o múltiples fibras, microscopía óptica, tomografía computarizada de rayos X y difracción de rayos X de gran ángulo) que proporcionan información de los mecanismos dominantes a distintas escalas. Los ensayos mecánicos macroscópicos muestran que el fieltro presenta una resistencia y ductilidad excepcionales. El estado inicial de las fibras es curvado, y la carga se transmite por el fieltro a través de una red aleatoria e isótropa de nudos creada por el proceso de punzonamiento, resultando en la formación de una red activa de fibra. La rotación y el estirado de las fibras activas es seguido por el deslizamiento y extracción de la fibra de los puntos de anclaje mecánico. La mayor parte de la resistencia y la energía disipada es proporcionada por la extracción de las fibras activas de los nudos, y la fractura final tiene lugar como consecuencia del desenredo total de la red en una sección dada donde la deformación macroscópica se localiza. No obstante, aunque la distribución inicial de la orientación de las fibras es isótropa, las propiedades mecánicas resultantes (en términos de rigidez, resistencia y energía absorbida) son muy anisótropas. Los ensayos de extracción de múltiples fibras en diferentes orientaciones muestran que la estructura de los nudos conecta más fibras en la dirección transversal en comparación con la dirección de la máquina. La mejor interconectividad de las fibras a lo largo de la dirección transversal da lugar a una esqueleto activo de fibras más denso, mejorando las propiedades mecánicas. En términos de afinidad, los fieltros deformados a lo largo de la dirección transversal exhiben deformación afín (la deformación macroscópica transfiere directamente a las fibras por el material circundante), mientras que el fieltro deformado a lo largo de la dirección de la máquina presenta deformación no afín, y la mayor parte de la deformación macroscópica no es transmitida a las fibras. A partir de estas observaciones experimentales, se ha desarrollado un modelo constitutivo para fieltros punzonados confinados por enlaces mecánicos. El modelo considera los efectos de la deformación no afín, la conectividad anisótropa inducida durante el punzonamiento, la curvatura y re-orientación de la fibra, así como el desenredo y extracción de la fibra de los nudos. El modelo proporciona la respuesta de un mesodominio del material correspondiente al volumen asociado a un elemento finito, y se divide en dos bloques. El primer bloque representa el comportamiento de la red y establece la relación entre el gradiente de deformación macroscópico y la respuesta microscópica, obtenido a partir de la integración de la respuesta de las fibras en el mesodominio. El segundo bloque describe el comportamiento de la fibra, teniendo en cuenta las características de la deformación de cada familia de fibras en el mesodominio, incluyendo deformación no afín, estiramiento, deslizamiento y extracción. En la medida de lo posible, se ha asignado un significado físico claro a los parámetros del modelo, por lo que se pueden identificar por medio de ensayos independientes. Las simulaciones numéricas basadas en el modelo se adecúan a los resultados experimentales de ensayos cuasi-estáticos y balísticos desde el punto de vista de la respuesta mecánica macroscópica y de los micromecanismos de deformación. Además, suministran información adicional sobre la influencia de las características microstructurales (orientación de la fibra, conectividad de la fibra anisótropa, afinidad, etc) en el comportamiento mecánico de los fieltros punzonados. Nonwoven fabrics are a class of textile material made up of a disordered fiber network linked by either thermal, chemical or mechanical bonds. They present lower stiffness and strength (as well as processing cost) than the woven counterparts but much higher deformability and energy absorption capability and are used in many different engineering applications (including thermal insulation, geotextiles, fireproof layers, filtration and water absorption, ballistic impact, etc). In particular, needle-punched nonwoven fabrics manufactured with high strength fibers present an excellent performance for ballistic protection, providing the same ballistic protection with one third of the areal weight as compared to dry woven fabrics. Nevertheless, very little is known about their deformation and fracture micromechanisms at the microscopic level and how they contribute to the macroscopic mechanical properties. This lack of knowledge hinders the optimization of their mechanical performance and also limits the development of physically-based models of the mechanical behavior that can be used in the design of structural components with these materials. In this thesis, a thorough study was carried out to ascertain the micromechanisms of deformation and the mechanical properties of a needle-punched nonwoven fabric made up by ultra high molecular weight polyethylene fibers. The deformation and energy dissipation processes were characterized in detail by a combination of experimental techniques (macroscopic mechanical tests at quasi-static and high strain rates, ballistic impact, single fiber and multi fiber pull-out tests, optical microscopy, X-ray computed tomography and wide angle X-ray diffraction) that provided information of the dominant mechanisms at different length scales. The macroscopic mechanical tests showed that the nonwoven fabric presented an outstanding strength and energy absorption capacity. It was found that fibers were initially curved and the load was transferred within the fabric through the random and isotropic network of knots created by needlepunching, leading to the formation of an active fiber network. Uncurling and stretching of the active fibers was followed by fiber sliding and pull-out from the entanglement points. Most of the strength and energy dissipation was provided by the extraction of the active fibers from the knots and final fracture occurred by the total disentanglement of the fiber network in a given section at which the macroscopic deformation was localized. However, although the initial fiber orientation distribution was isotropic, the mechanical properties (in terms of stiffness, strength and energy absorption) were highly anisotropic. Pull-out tests of multiple fibers at different orientations showed that structure of the knots connected more fibers in the transverse direction as compared with the machine direction. The better fiber interconnection along the transverse direction led to a denser active fiber skeleton, enhancing the mechanical response. In terms of affinity, fabrics deformed along the transverse direction essentially displayed affine deformation {i.e. the macroscopic strain was directly transferred to the fibers by the surrounding fabric, while fabrics deformed along the machine direction underwent non-affine deformation, and most of the macroscopic strain was not transferred to the fibers. Based on these experimental observations, a constitutive model for the mechanical behavior of the mechanically-entangled nonwoven fiber network was developed. The model accounted for the effects of non-affine deformation, anisotropic connectivity induced by the entanglement points, fiber uncurling and re-orientation as well as fiber disentanglement and pull-out from the knots. The model provided the constitutive response for a mesodomain of the fabric corresponding to the volume associated to a finite element and is divided in two blocks. The first one was the network model which established the relationship between the macroscopic deformation gradient and the microscopic response obtained by integrating the response of the fibers in the mesodomain. The second one was the fiber model, which took into account the deformation features of each set of fibers in the mesodomain, including non-affinity, uncurling, pull-out and disentanglement. As far as possible, a clear physical meaning is given to the model parameters, so they can be identified by means of independent tests. The numerical simulations based on the model were in very good agreement with the experimental results of in-plane and ballistic mechanical response of the fabrics in terms of the macroscopic mechanical response and of the micromechanisms of deformation. In addition, it provided additional information about the influence of the microstructural features (fiber orientation, anisotropic fiber connectivity, affinity) on the mechanical performance of mechanically-entangled nonwoven fabrics.

Estudio microestructural de pastas de cemento expuestas a medios simulados de agresividad moderada frecuentes en ambientes rurales

Los materiales base cemento (pastas, morteros, hormigones y otros tipos de mezclas) son materiales ampliamente utilizados en la sociedad actual y son uno de los pilares de la ingeniería civil debido a sus buenas propiedades estructurales, facilidad de fabricación y bajo coste. Sus propiedades permiten su uso en ambientes industriales y naturales, siendo materiales muy versátiles siempre y cuando, se tenga en cuenta que sus propiedades durables son limitadas en ambientes donde se producen fenómenos de lixiviación y ataque por diversos iones agresivos. El presente proyecto de investigación se desarrolló motivado por la necesidad de profundizar en el conocimiento del comportamiento de los materiales base cemento en situaciones concretas de exposición a cierto tipo de degradaciones que se producen frecuentemente en explotaciones agropecuarias ubicadas en ambientes naturales. Se diseñó un procedimiento experimental que nos permitiese evaluar el efecto que tienen los ácidos orgánicos sobre la matriz cementicia, así como la acción que presentan los sulfatos y las aguas naturales en los mismos. Teniendo muy presente siempre las características de las disoluciones a las cuales se ha expuesto el material. En último término, se trata de conocer los mecanismos de los procesos de ataque para poder definir el comportamiento del material en estos medios. Los procedimientos de ensayo, así como las técnicas de caracterización son las herramientas fundamentales con las que profundizar en el conocimiento del material, por lo que resulta de vital importancia conocer a fondo las posibilidades que su empleo nos ofrece. En el presente trabajo se ha desarrollado un profundo estudio del uso del termoanálisis en la caracterización de pastas de cemento. Además se han optimizado los procedimientos de caracterización de las muestras con otro tipo de técnicas. La caracterización de las probetas nos ha permitido comprobar el comportamiento del material en situaciones de exposición en ensayos acelerados de laboratorio. Los resultados obtenidos han permitido determinar que el pH del medio agresivo es una variable fundamental cuando se trata de evaluar la agresividad del mismo. La presencia de ciertos iones desarrollaría efectos de sinergia con respecto al pH y condicionaría los valores de las constantes termodinámicas que rigen los equilibrios. La posibilidad de formación de sales de ácidos orgánicos y la diferente solubilidad de las mismas derivaría en cambios en los comportamientos mecánicos. La proporción de compuestos de aluminio o la presencia de puzolanas capaces de fijar el calcio son también factores evidenciados como determinantes en el comportamiento del material. Además se podría afirmar que la disolución de la portlandita es un efecto determinante en el proceso de degradación. Nowadays, cement based materials (pastes, mortars, concrete and other mixtures) are widely used. These kinds of material are one of the pillars of Civil Engineering due to their structural properties, easy manufacturing and low cost. Their properties allow the use in industrial and natural environments. They are very versatile materials for use in this type of environment. But it is necessary to to keep in mind that they have a durability limited when they are exposed to aggressives environments where leaching process occur and various aggressive ions can damage the materials. This research work was developed motivated by the need to go in dept in the knoledge of the behavior of cement based materials. These kinds of materials frecuently are exposed to some types of damage that occur on farms located in natural environments. An experimental procedure that would allow us to evaluate the effect of organic acids on the cement matrix and the action presented by sulfates and natural waters in the same was designed. Always bearing in mind the characteristics of the solutions to which the material is exposed. Ultimately it comes to understanding the mechanisms of the processes leading to define the material behavior in this type of environment. Test procedures and characterization techniques are fundamental tools which to deepen the knowledge of the material, so it is important to know in its potential uses. In this work we have developed a deep study of the use of thermal analysis in the characterization of cement pastes. Furthermore, we have optimized characterization procedures of samples with other techniques. The characterization of the samples has allowed us to check the behavior of the material on exposure to accelerated laboratory tests. The results have established that the pH of the corrosive media is a fundamental variable when it comes to assessing the aggressiveness of it. The presences of certain ions develop synergies with respect to pH and would determine the values of the constants governing thermodynamic equilibria. The possible formation of salts of organic acids and the different solubility of the same would lead to changes in mechanical behavior. The proportion of aluminum compounds or the presence of pozzolans capable of binding calcium is also evidenced as determining factors in the material behavior. Besides we could assert that the dissolution of the portlandite is a determining effect on the degradation process.

Higher education in industrial engineering in Peru: towards a new model based on skills

This article analyzes the progress of Industrial Engineering in Peru, the relationship to major trends in Europe and North America, and the projected outlook for the future. It is determined that the need for this engineering specialty includes a significant degree of resource management, and the formation of engineers through education requires not only the acquisition and strengthening of technical knowledge, but also the development of the competences that are required by both employers and the recipients of the benefits of engineering: society. Conclusions have been drawn based on state-of-the-art analyses from Europe and North America, and definitions of trends for engineering.

Education Planning Evolution for Forest Engineering in Spain

Forest engineering in Spain has a long tradition and active presence in the engineering field. It is also one of the first educational institutions that shaped the Spanish technological panorama in the mid nineteenth century. The actual situation of the forest systems in Spain is the result of 166 years of observation, research, education and the application of specific techniques and principles that forest engineers acquired with the successive study plans that were implanted in educational institutions. In this paper, the planning historical process of education in Forest engineer is analyzed, differentiating between four historical periods. The analysis of the stages focuses on the contents of the study plans, the orientation towards educational objectives, the duration of the studies and the causes for the modifications that had an impact on the evolution through time within the framework of the acquired experience and the technological advances

Application of the homogenization techniques to the determination of the effective flexure constants of plate structural systems

A Mindlin plate with periodically distributed ribs patterns is analyzed by using homogenization techniques based on asymptotic expansion methods. The stiffness matrix of the homogenized plate is found to be dependent on the geometrical characteristics of the periodical cell, i.e. its skewness, plan shape, thickness variation etc. and on the plate material elastic constants. The computation of this plate stiffness matrix is carried out by averaging over the cell domain some solutions of different periodical boundary value problems. These boundary value problems are defined in variational form by linear first order differential operators on the cell domain and the boundary conditions of the variational equation correspond to a periodic structural problem. The elements of the stiffness matrix of homogenized plate are obtained by linear combinations of the averaged solution functions of the above mentioned boundary value problems. Finally, an illustrative example of application of this homogenization technique to hollowed plates and plate structures with ribs patterns regularly arranged over its area is shown. The possibility of using in the profesional practice the present procedure to the actual analysis of floors of typical buildings is also emphasized.

Discourses and values underpin public debate on fracking in Spain: a case study at the crossroad

In the EU context extraction of shale and oil gas by hydraulic fracturing (fracking) differs from country to country in terms of legislation and implementation. While fossil fuel extraction using this technology is currently taking place in the UK, Germany and France have adopted respective moratoria. In between is the Spanish case, where hydrocarbon extraction projects through fracking have to undergo mandatory and routine environmental assessment in accordance with the last changes to environmental regulations. Nowadays Spain is at the crossroad with respect to the future of this technology. We presume a social conflictt in our country since the position and strategy of the involved and confronted social actors -national, regional and local authorities, energy companies, scientists, NGO and other social organization- are going to play key and likely divergent roles in its industrial implementation and public acceptance. In order to improve knowledge on how to address these controverted situations from the own engineering context, the affiliated units from the Higher Technical School of Mines and Energy Engineering at UPM have been working on a transversal program to teach values and ethics. Over the past seven years, this pioneering experience has shown the usefulness of applying a consequentialist ethics, based on a case-by-case approach and costs-benefits analysis both for action and inaction. As a result of this initiative a theoretical concept has arisen and crystallized in this field: it is named Inter-ethics. This theoretical perspective can be very helpful in complex situations, with multi-stakeholders and plurality of interests, when ethical management requires the interaction between the respective ethics of each group; professional ethics of a single group is not enough. Under this inter-ethics theoretical framework and applying content analysis techniques, this paper explores the articulation of the discourse in favour and against fracking technology and its underlying values as manifested in the Spanish traditional mass media and emerging social media such as Youtube. Results show that Spanish public discourse on fracking technology includes the costs-benefits analysis to communicate how natural resources from local communities may be affected by these facilities due to environmental, health and economic consequences. Furthermore, this technology is represented as a solution to the "demand of energy" according to the optimistic discourse while, from a pessimistic view, fracking is often framed as a source "environmental problems" and even natural disasters as possible earthquakes. In this latter case, this negative representation could have been influenced by the closure of a macro project to store injected natural gas in the Mediterranean Sea using the old facilities of an oil exploitation in Amposta (Proyecto Cástor). The closure of this project was due to the occurrence of earthquakes whose intensity was higher than the originally expected by the experts in the assessment stage of the project.

Protein engineering of Bacillus thuringiensis δ-endotoxin: Mutations at domain II of CryIAb enhance receptor affinity and toxicity toward gypsy moth larvae

Substitutions or deletions of domain II loop residues of Bacillus thuringiensis δ-endotoxin CryIAb were constructed using site-directed mutagenesis techniques to investigate their functional roles in receptor binding and toxicity toward gypsy moth (Lymantria dispar). Substitution of loop 2 residue N372 with Ala or Gly (N372A, N372G) increased the toxicity against gypsy moth larvae 8-fold and enhanced binding affinity to gypsy moth midgut brush border membrane vesicles (BBMV) ≈4-fold. Deletion of N372 (D3), however, substantially reduced toxicity (>21 times) as well as binding affinity, suggesting that residue N372 is involved in receptor binding. Interestingly, a triple mutant, DF-1 (N372A, A282G and L283S), has a 36-fold increase in toxicity to gypsy moth neonates compared with wild-type toxin. The enhanced activity of DF-1 was correlated with higher binding affinity (18-fold) and binding site concentrations. Dissociation binding assays suggested that the off-rate of the BBMV-bound mutant toxins was similar to that of the wild type. However, DF-1 toxin bound 4 times more than the wild-type and N372A toxins, and it was directly correlated with binding affinity and potency. Protein blots of gypsy moth BBMV probed with labeled N372A, DF-1, and CryIAb toxins recognized a common 210-kDa protein, indicating that the increased activity of the mutants was not caused by binding to additional receptor(s). The improved binding affinity of N372A and DF-1 suggest that a shorter side chain at these loops may fit the toxin more efficiently to the binding pockets. These results offer an excellent model system for engineering δ-endotoxins with higher potency and wider spectra of target pests by improving receptor binding interactions.

Tipologia e freqüência de métodos de ensino em disciplinas de formação profissionalizante em engenharia de produção

A globalização dos mercados trouxe, para o cenário brasileiro, impactos políticos, socioecônomicos e culturais enfatizando a figura de um homem, denominado cidadão do mundo. Devido às próprias limitações humanas, em um mundo em que as mudanças são constantes, esse cidadão tem como característica ser um eterno aprendiz. A universidade, locus de produção de identidade do país e cuja função social é formar indivíduos neste novo contexto global, se encontra em um dilema existencial: pesquisa e ensino; a superação dessa dicotomia poderá derivar de novas relações humanas na formação do sujeito-coletivo que constrói sua identidade através das possibilidades de diversidades do mundo que o circunda. Estando na aprendizagem, para a aquisição de conhecimentos ou o desenvolvimento de habilidades e atitudes pelas experiências educativas, o papel do docente como mediador em organizar estratégias (métodos e técnicas de ensino) para que o discente conheça e crie a cultura. O objetivo desta pesquisa é mapear a tipologia e freqüência de métodos de ensino em disciplinas de formação profissionalizante em engenharia de produção. Identificar, através de um estudo teórico e revisão bibliográfica, os tipos e métodos mais utilizados no ensino superior do curso de engenharia de produção, bem como as vantagens, limitações e habilidades desenvolvidas segundo a utilização adequada dessas técnicas. No estudo de caso, se analisam os métodos de ensino e as competências necessárias nas disciplinas profissionalizantes do curso de engenharia de produção mecânica da escola de engenharia de São Carlos cujos métodos de coleta foram através de questionário para os discentes e entrevistas junto aos docentes. Embora haja uma variedade de técnicas socializantes que deveriam atender aos objetivos específicos de cada disciplina, os avanços tornam-se despercebidos pela descrição da técnica. Ao menosprezar a conduta e observação docente (dimensão técnica/ética/política), durante o processo, o docente abdica de sua autoridade no processo de ensino/aprendizagem; as limitações, como a aula expositiva tradicional (centrando o conhecimento no professor), têm se tornado fonte de estagnação, desfavorecendo a amplitude do desenvolvimento do potencial humano e fazendo com que o discente não se torne co-autor de seu processo de aprender a aprender, pois limita sua fonte de investigação, criatividade e anseio de desafio.

Towards a model-driven engineering approach of data mining

Nowadays, data mining is based on low-level specications of the employed techniques typically bounded to a specic analysis platform. Therefore, data mining lacks a modelling architecture that allows analysts to consider it as a truly software-engineering process. Here, we propose a model-driven approach based on (i) a conceptual modelling framework for data mining, and (ii) a set of model transformations to automatically generate both the data under analysis (via data-warehousing technology) and the analysis models for data mining (tailored to a specic platform). Thus, analysts can concentrate on the analysis problem via conceptual data-mining models instead of low-level programming tasks related to the underlying-platform technical details. These tasks are now entrusted to the model-transformations scaffolding.

A model driven framework for geographic knowledge discovery

Geographic knowledge discovery (GKD) is the process of extracting information and knowledge from massive georeferenced databases. Usually the process is accomplished by two different systems, the Geographic Information Systems (GIS) and the data mining engines. However, the development of those systems is a complex task due to it does not follow a systematic, integrated and standard methodology. To overcome these pitfalls, in this paper, we propose a modeling framework that addresses the development of the different parts of a multilayer GKD process. The main advantages of our framework are that: (i) it reduces the design effort, (ii) it improves quality systems obtained, (iii) it is independent of platforms, (iv) it facilitates the use of data mining techniques on geo-referenced data, and finally, (v) it ameliorates the communication between different users.

Use of subpixel techniques in pocket cameras to measure vibrations and displacements

Presentación oral SPIE Photonics Europe, Brussels, 16-19 April 2012.

Measurement of wide frequency range structural microvibrations with a pocket digital camera and sub-pixel techniques

Analysis of vibrations and displacements is a hot topic in structural engineering. Although there is a wide variety of methods for vibration analysis, direct measurement of displacements in the mid and high frequency range is not well solved and accurate devices tend to be very expensive. Low-cost systems can be achieved by applying adequate image processing algorithms. In this paper, we propose the use of a commercial pocket digital camera, which is able to register more than 420 frames per second (fps) at low resolution, for accurate measuring of small vibrations and displacements. The method is based on tracking elliptical targets with sub-pixel accuracy. Our proposal is demonstrated at a 10 m distance with a spatial resolution of 0.15 mm. A practical application over a simple structure is given, and the main parameters of an attenuated movement of a steel column after an impulsive impact are determined with a spatial accuracy of 4 µm.

Reverse engineering as a teaching tool: the corneal topographer

Póster presentado en EDULEARN12, International Conference on Education and New Learning Technologies, Barcelona, 2nd-4th July 2012.