Conceptualisation, design and development of a primary school based child healthy weight intervention

INTRODUCTION: In common with much of the developed world, Scotland has a severe and well established problem with overweight and obesity in childhood with recent figures demonstrating that 31% of Scottish children aged 2-15 years old were overweight including obese in 2014. This problem is more pronounced in socioeconomically disadvantaged groups and in older children across all economic groups (Scottish Health Survey, 2014). Children who are overweight or obese are at increased risk of a number of adverse health outcomes in the short term and throughout their life course (Lobstein and Jackson-Leach, 2006). The Scottish Government tasked all Scottish Health Boards with developing and delivering child healthy weight interventions to clinically overweight or obese children in an attempt to address this health problem. It is therefore imperative to deliver high quality, affordable, appropriately targeted interventions which can make a sustained impact on children’s lifestyles, setting them up for life as healthy weight adults. This research aimed to inform the design, readiness for application and Health Board suitability of an effective primary school-based curricular child healthy weight intervention. METHODS: the process involved in conceptualising a child healthy weight intervention, developing the intervention, planning for implementation and subsequent evaluation was guided by the PRECEDE-PROCEED Model (Green and Kreuter, 2005) and the Intervention Mapping protocol (Lloyd et al. 2011). RESULTS: The outputs from each stage of the development process were used to formulate a child healthy weight intervention conceptual model then develop plans for delivery and evaluation. DISCUSSION: The Fit for School conceptual model developed through this process has the potential to theoretically modify energy balance related behaviours associated with unhealthy weight gain in childhood. It also has the potential to be delivered at a Health Board scale within current organisational restrictions.

Application of an online-biomass sensor in an optical multisensory platform prototype for growth monitoring of biotechnical relevant microorganism and cell lines in single-use shake flasks

In the context of this work we evaluated a multisensory, noninvasive prototype platform for shake flask cultivations by monitoring three basic parameters (pH, pO2 and biomass). The focus lies on the evaluation of the biomass sensor based on backward light scattering. The application spectrum was expanded to four new organisms in addition to E. coli K12 and S. cerevisiae [1]. It could be shown that the sensor is appropriate for a wide range of standard microorganisms, e.g., L. zeae, K. pastoris, A. niger and CHO-K1. The biomass sensor signal could successfully be correlated and calibrated with well-known measurement methods like OD600, cell dry weight (CDW) and cell concentration. Logarithmic and Bleasdale-Nelder derived functions were adequate for data fitting. Measurements at low cell concentrations proved to be critical in terms of a high signal to noise ratio, but the integration of a custom made light shade in the shake flask improved these measurements significantly. This sensor based measurement method has a high potential to initiate a new generation of online bioprocess monitoring. Metabolic studies will particularly benefit from the multisensory data acquisition. The sensor is already used in labscale experiments for shake flask cultivations.

Os efeitos das reclamações online na lealdade dos consumidores: um estudo experimental

In an environment of constant change, technological developments, market competition and more informed consumers, the search for a lasting relationship through the conquest of loyalty has become the objective of companies. However, several authors suggest that this loyalty can be affected by negative comments available on the internet. Therefore, this dissertation has as objective to examine if the complaints are available on the internet impact the loyalty to a brand of mobile phone. The research used as the basis the Expanded NCSB model suggest by Johnson et al. (2001), studying five prominent drives of loyalty: image/brand reputation, affective commitment, calculative commitment, perceived value and trust, beyond the satisfaction construct as moderator variable. The research method adopted was the experimental design which included 285 undergraduate students, with the trial which included 285 undergraduate students, with the field study of the mobile industry, specifically, the brands of cell phones. The research approach was quantitative and methods were descriptive statistics, factor analysis, cluster analysis, linear regression and non-parametric test of Wilcoxon for data analysis. Of the 16 hypothesis stemmed from the research model proposed, 12 were confirmed. The results showed that the complaint available on the internet, here represented by the available on the site Reclame Aqui, may impact consumer perceptions about brand loyalty, as well as its antecedents, being that these complaints can affect all the consumers, regardless of historical satisfaction with the brand. It also noted the positive relationship between the independent variables trust, image/brand reputation, perceived value, affective commitment and calculative commitment and the dependent variable - loyalty, even when considering the data obtained after exposure to the complaint. However, no unanimous conclusion that the relationship between these variables was strongest in the group with satisfactory experience. At the first moment of the research, the trust was the most important variable for the formation of loyalty. However, after exposure to treatment, the image/brand reputation, was more relevant. Contributions of the study, limitations and recommendations for future researches are approached in the present investigation

Capturing and indexing rehearsals: the design and usage of a digital archive of performing arts

Preserving the cultural heritage of the performing arts raises difficult and sensitive issues, as each performance is unique by nature and the juxtaposition between the performers and the audience cannot be easily recorded. In this paper, we report on an experimental research project to preserve another aspect of the performing arts—the history of their rehearsals. We have specifically designed non-intrusive video recording and on-site documentation techniques to make this process transparent to the creative crew, and have developed a complete workflow to publish the recorded video data and their corresponding meta-data online as Open Data using state-of-the-art audio and video processing to maximize non-linear navigation and hypervideo linking. The resulting open archive is made publicly available to researchers and amateurs alike and offers a unique account of the inner workings of the worlds of theater and opera.

A educação global e o diálogo intercultural em contexto de aprendizagem online : os cursos de educação global

A enorme interdependência entre os povos, que caracteriza o mundo contemporâneo, justifica a importância crucial da aquisição de competências de comunicação intercultural, uma vez que poderão ter um efeito catalisador na resolução de grandes questões globais. O desafio que é colocado à Educação, para colaborar na aquisição de tais competências, é de adaptação aos novos meios de comunicação globais e de reinvenção de novas metodologias e abordagens. Destacam-se neste campo a Educação Global, como um campo interdisciplinar que se concretiza num processo de aprendizagem transformativa, focando-se nas questões e desafios globais, e o Ensino Online, possuidor da capacidade de quebrar barreiras físicas e temporais e juntar num mesmo “espaço” pessoas dos mais variados pontos do planeta. Com o objetivo geral de analisar a importância dos contextos de formação online no desenvolvimento de competências interculturais, esta investigação propõe-se mostrar de que forma cursos online, oferecidos em contexto multicultural, na área de Educação Global, promovem o desenvolvimento de competências de comunicação intercultural. De entre os resultados da investigação destaca-se a aquisição moderada de uma maior consciência intercultural e de aptidões de comunicação intercultural, considerando-se como elementos fundamentais para a promoção de diálogos interculturais ao longo do curso o facto de a turma ser multicultural, a colaboração entre pares e algumas das ferramentas de comunicação existentes na plataforma onde decorreu a formação.

Curso online para a parte pral do Celpe-Bras : contribuições da avaliação de proficiência para o ensino-aprendizagem de PLE

Dissertação (mestrado)—Universidade de Brasília, Departamento de Línguas Estrangeiras e Tradução, Programa de Pós-Graduação em Linguística Aplicada, 2016.

Design of composites for thermal management: Aluminum reinforced with diamond-containing bimodal particle mixtures

A new design route is proposed in order to fabricate aluminum matrix diamond-containing composite materials with optimized values of thermal conductivity (TC) for thermal management applications. The proper size ratio and proportions of particulate diamond–diamond and diamond–SiC bimodal mixtures are selected based on calculations with predictive schemes, which combine two main issues: (i) the volume fraction of the packed particulate mixtures, and (ii) the influence of different types of particulates (with intrinsically different metal/reinforcement interfacial thermal conductances) on the overall thermal conductivity of the composite material. The calculated results are validated by comparison with measurements on composites fabricated by gas pressure infiltration of aluminum into preforms of selected compositions of particle mixtures. Despite the relatively low quality (low price) of the diamond particles used in this work, outstanding values of TC are encountered: a maximum of 770 W/m K for Al/diamond–diamond and values up to 690 W/m K for Al/diamond–SiC.

Design of bicycling suitability maps for hilly cities

Post-print version. Pictures and tables separated from main text and presented at the end.

Design of evacuation plans for densely urbanised city centres

The high population density and tightly packed nature of some city centres make emergency planning for these urban spaces especially important, given the potential for human loss in case of disaster. Historic and recent events have made emergency service planners particularly conscious of the need for preparing evacuation plans in advance. This paper discusses a methodological approach for assisting decision-makers in designing urban evacuation plans. The approach aims at quickly and safely moving the population away from the danger zone into shelters. The plans include determining the number and location of rescue facilities, as well as the paths that people should take from their building to their assigned shelter in case of an occurrence requiring evacuation. The approach is thus of the location–allocation–routing type, through the existing streets network, and takes into account the trade-offs among different aspects of evacuation actions that inevitably come up during the planning stage. All the steps of the procedure are discussed and systematised, along with computational and practical implementation issues, in the context of a case study – the design of evacuation plans for the historical centre of an old European city.

Golf course irrigation and self-sufficiency water in Southern Spain

During the first decade of the 21st century, many golf courses were developed in the Southeast of Spain, which greatly increased the number of these facilities. Almost all of these golf courses have been accompanied by large residential developments composed of thousands of dwelling units. This article seeks to identify the factors that influence golf courses’ water consumption and estimate the number of dwelling units that an associated residential development needs to have to provide the effluent necessary to fully meet the irrigation needs of a golf course. The study indicates that private golf courses achieve greater levels of irrigation efficiency than public golf courses and that the golf courses associated with residential developments subject the irrigation needs of the grassland to the sale requirements of the real estate properties. The study also estimates that a golf course requires approximately 3000 dwelling units with an average annual occupancy of 33% to achieve self-sufficiency for irrigation.

Design, Fabrication, and Mechanical Property Analysis of 3D Nanoarchitected Materials

Recent developments in micro- and nanoscale 3D fabrication techniques have enabled the creation of materials with a controllable nanoarchitecture that can have structural features spanning 5 orders of magnitude from tens of nanometers to millimeters. These fabrication methods in conjunction with nanomaterial processing techniques permit a nearly unbounded design space through which new combinations of nanomaterials and architecture can be realized. In the course of this work, we designed, fabricated, and mechanically analyzed a wide range of nanoarchitected materials in the form of nanolattices made from polymer, composite, and hollow ceramic beams. Using a combination of two-photon lithography and atomic layer deposition, we fabricated samples with periodic and hierarchical architectures spanning densities over 4 orders of magnitude from ρ=0.3-300kg/m³ and with features as small as 5nm. Uniaxial compression and cyclic loading tests performed on different nanolattice topologies revealed a range of novel mechanical properties: the constituent nanoceramics used here have size-enhanced strengths that approach the theoretical limit of materials strength; hollow aluminum oxide (Al₂O₃) nanolattices exhibited ductile-like deformation and recovered nearly completely after compression to 50% strain when their wall thicknesses were reduced below 20nm due to the activation of shell buckling; hierarchical nanolattices exhibited enhanced recoverability and a near linear scaling of strength and stiffness with relative density, with E∝ρ^1.04 and σy∝ρ^1.17 for hollow Al₂O₃ samples; periodic rigid and non-rigid nanolattice topologies were tested and showed a nearly uniform scaling of strength and stiffness with relative density, marking a significant deviation from traditional theories on “bending” and “stretching” dominated cellular solids; and the mechanical behavior across all topologies was highly tunable and was observed to strongly correlate with the slenderness λ and the wall thickness-to-radius ratio t/a of the beams. These results demonstrate the potential of nanoarchitected materials to create new highly tunable mechanical metamaterials with previously unattainable properties.

O marketing das notícias : consumo de informações online, persuasão e confiança

Dissertação (mestrado)—Universidade de Brasília, Instituto de Psicologia, Departamento de Psicologia Social e do Trabalho, Programa de Pós-Graduação em Psicologia Social, do Trabalho e das Organizações, 2016.

The Impact of a Classroom Performance System on Learning Gains in a Biology Course for Science Majors

This study was conducted to determine if the use of the technology known as Classroom Performance System (CPS), specifically referred to as “Clickers”, improves the learning gains of students enrolled in a biology course for science majors. CPS is one of a group of developing technologies adapted for providing feedback in the classroom using a learner-centered approach. It supports and facilitates discussion among students and between them and teachers, and provides for participation by passive students. Advocates, influenced by constructivist theories, claim increased academic achievement. In science teaching, the results have been mixed, but there is some evidence of improvements in conceptual understanding. The study employed a pretest-posttest, non-equivalent groups experimental design. The sample consisted of 226 participants in six sections of a college biology course at a large community college in South Florida with two instructors trained in the use of clickers. Each instructor randomly selected their sections into CPS (treatment) and non-CPS (control) groups. All participants filled out a survey that included demographic data at the beginning of the semester. The treatment group used clicker questions throughout, with discussions as necessary, whereas the control groups answered the same questions as quizzes, similarly engaging in discussion where necessary. The learning gains were assessed on a pre/post-test basis. The average learning gains, defined as the actual gain divided by the possible gain, were slightly better in the treatment group than in the control group, but the difference was statistically non-significant. An Analysis of Covariance (ANCOVA) statistic with pretest scores as the covariate was conducted to test for significant differences between the treatment and control groups on the posttest. A second ANCOVA was used to determine the significance of differences between the treatment and control groups on the posttest scores, after controlling for sex, GPA, academic status, experience with clickers, and instructional style. The results indicated a small increase in learning gains but these were not statistically significant. The data did not support an increase in learning based on the use of the CPS technology. This study adds to the body of research that questions whether CPS technology merits classroom adaptation.

Online impedance spectroscopy estimation of a battery

Electrochemical impedance spectroscopy (EIS) is a helpful tool to understand how a battery is behaving and how it degrades. One of the disadvantages is that it is typically an 'off-line' process. This paper investigates an alternative method of looking at impedance spectroscopy of a battery system while it is on-line and operational by manipulating the switching pattern of the dc-dc converter to generate low frequency harmonics in conjunction with the normal high frequency switching pattern to determine impedance in real time. However, this adds extra ripple on the inductor which needs to be included in the design calculations. The paper describes the methodology and presents some experimental results in conjunction with EIS results to illustrate the concept.

The Academic-enterprise experiences framework as a guide for design education

The establishment of support platforms for the development of a new culture in design education, in order to achieve both research exploitation and its results, as an approach to the industrial community, challenges higher education institutions to rethink their functioning, divided between investigation on their own initiative or on demand, and its usefulness / practical application. At the same time, through design education, how can they be the engine that aggregates all these frequently antagonistic interests? Polytechnic institutes are predisposed to collaboration and interdisciplinarity. In our course of Technology and Design of Furniture, the availability of a production unit, testing laboratories, and expertise in engineering, design and marketing, encourage the development of a holistic project. In order to develop such knowledge, we adapt three important ways of thinking in designing interactions influenced by the traditional approach, namely, 1) identifying and understanding a design problem, i.e. a market need, 2) defining the design process and knowing what can be used for design education, i.e. opportunities for design education, and 3) sustainability of this framework and design projects' alignment with education in the same field. We explain our approach by arguing from the academicenterprise experiences perspective. This concept is proposed as a way to achieve those three ways of thinking in design education. Then, a set of interaction attributes is defined to explain how engineering and product design education can enhance meaningful relations with manufacturers, stakeholders and society in general. A final discussion is presented with the implications and benefits of this approach. The results suggest that through academic-enterprise partnerships in design, several goals such as students' motivation, product design innovation and potential for knowledge transfer to industries can be achieved.