Multi-strand narrative structures: a filmic game of multiple players

Session 7: Playing with Roles, images and improvising New States of Awareness, 3rd Global Conference, 1st November – 3rd November, 2014, Prague, Czech Republic.

Distributed controllers modeling through Petri nets with multi-asynchronous-channels

This paper proposes the concept of multi-asynchronous-channel for Petri nets. Petri nets extended with multi-asynchronous-channels and time-domains support the specification of distributed controllers, where each controller has a synchronous execution but the global system is asynchronous (globally-asynchronous locally-synchronous systems). Each multi-asynchronous-channel specify the interaction between two or more distributed controllers. These channels, together with the time-domain concept, ensure the creation of network-independent models to support implementations using heterogeneous communication networks. The created models support not only the systems documentation but also their validation and implementation through simulation tools, verification tools, and automatic code generators. An application example illustrates the use of a Petri net class extended with the proposed channels. © 2015 IEEE.

PV systems linked to the grid: parameter identification with a heuristic procedure

This paper focuses on a PV system linked to the electric grid by power electronic converters, identification of the five parameters modeling for photovoltaic systems and the assessment of the shading effect. Normally, the technical information for photovoltaic panels is too restricted to identify the five parameters. An undemanding heuristic method is used to find the five parameters for photovoltaic systems, requiring only the open circuit, maximum power, and short circuit data. The I- V and the P- V curves for a monocrystalline, polycrystalline and amorphous photovoltaic systems are computed from the parameters identification and validated by comparison with experimental ones. Also, the I- V and the P- V curves under the effect of partial shading are obtained from those parameters. The modeling for the converters emulates the association of a DC-DC boost with a two-level power inverter in order to follow the performance of a testing commercial inverter employed on an experimental system. © 2015 Elsevier Ltd.

Optimization of cruciform specimens for biaxial fatigue loading with direct multi search

In order to correctly assess the biaxial fatigue material properties one must experimentally test different load conditions and stress levels. With the rise of new in-plane biaxial fatigue testing machines, using smaller and more efficient electrical motors, instead of the conventional hydraulic machines, it is necessary to reduce the specimen size and to ensure that the specimen geometry is appropriate for the load capacity installed. At the present time there are no standard specimen's geometries and the indications on literature how to design an efficient test specimen are insufficient. The main goal of this paper is to present the methodology on how to obtain an optimal cruciform specimen geometry, with thickness reduction in the gauge area, appropriate for fatigue crack initiation, as a function of the base material sheet thickness used to build the specimen. The geometry is optimized for maximum stress using several parameters, ensuring that in the gauge area the stress distributions on the loading directions are uniform and maximum with two limit phase shift loading conditions (delta = 0 degrees and (delta = 180 degrees). Therefore the fatigue damage will always initiate on the center of the specimen, avoiding failure outside this region. Using the Renard Series of preferred numbers for the base material sheet thickness as a reference, the reaming geometry parameters are optimized using a derivative-free methodology, called direct multi search (DMS) method. The final optimal geometry as a function of the base material sheet thickness is proposed, as a guide line for cruciform specimens design, and as a possible contribution for a future standard on in-plane biaxial fatigue tests

Mediterranean spotted fever and identification of new agents of rickettsioses in Portugal : epidemiological determinants, host and microbial features in portuguese patients

Resumo: a febre botonosa, também conhecida por febre escaro-nodular (FEN) é uma doença endémica nos Países da bacia do Mediterrâneo, África, Médio Oriente, Índia e Paquistão. O agente etiológico responsável por esta patologia é a bactéria Rickettsia conorii. Contudo, em alguns países, como Portugal e Itália, esta patologia é causada por duas estirpes diferentes: R conorii Malish e R conorii Israeli spotted fever strain. O principal vector e reservatório é o ixodídeo Rhipicephalus sanguineus. Mesmo com uma elevada taxa de subnotificação detectada no nosso País, a taxa incidência da FEN é de 8.4/105 habitantes (1989-2005), uma das mais altas quando comparada coom a de outros países da bacia do Mediterrâneo. De todos os distritos portugueses, Bragança e Beja são aqueles que apresentam as taxas de incidência mais elevadas, 56,8/105 habitantes e 47,4 / 105 habitantes respectivamente. Em Portugal, as alterações climáticas verificadas na última década, nomeadamente a subida das temperaturas médias anuais, parecem ter influenciado o ciclo de vida do vector e a sua dinâmica sazonal, permitindo ao R. sanguineus completar mais de um ciclo de vida por ano. Este facto, e a possibilidade deste vector se manter activo noutros meses do ano, nomeadamente nos meses de inverno, tem influenciado consequentemente o padrão de distribuição anual dos casos de FEN. A febre escaro-nodular caracteriza-se clinicamente como uma doença exantemática, com um processo de vasculite generalizado. Apesar de na generalidade ser considerada uma doença benigna (quando tratada atempadamente e com terapêutica adequada e específica)e de estarem descritos casos graves em cerca de 5-6% dos doentes, em Portugal essa percentagem aumentou e consequentemente levou a um aumento de casos fatais. Este facto tornou-se mais evidente em 1997, no Hospital Distrital de Beja e no Hospital Garcia de Orta, onde a taxa de letalidade atingiu os 32% e 18% respectivamente.Para além dos factores de co-morbilidade encontrados nos doentes mais graves, como diabetes mellitus, ou o atraso na instituição da terapêutica específica, foi colocada de que a estirpe R. conorii Israel spotted fever strain pudesse ser mais virulenta ou então estivesse associada a diferentes manifestações clínicas que dificultassem o diagnóstico clínico e a instituição atempada da terapêutica. Houve ainda a necessidade de avaliar alguns parâmetros imunológicos dos doentes e tentar identificar que factores, nomeadamente que citoquinas, poderiam estar envolvidos na resposta a uma infecção por R.conorii.Face a estas questões foi avaliada e comparada a epidemiologia, manifestações clínicas e laboratoriais de 140 doentes (71 infectados com R. conorii Malish e 69 infectados com R. conorii Israel spotted fever strain). Concluiu-se que existe uma sobreposição de manifestações clinicas entre os dois grupos de doentes, mas que a percentagem da escara de inoculação é significativamente inferior em doentes infectados com R. conorii Israel spotted fever strain. Dos resultados mais importantes encontrados neste estudo concluiu-se que a estirpe R. conorii Malish e é demonstrado, pela primeira vez, estatisticamente que o alcoolismo é um factor de risco para a morte de doentes com FEN. Associadas a factores de um mau prognósitco da doença, estão as manifestações gastrointestinais, que poderão ser ou não reflexo de alterações do sistema nervoso central, e ainda a alteração de parâmetros laboratoriais como a presença de hiperbilirubinemia e aumento dos valores da ureia.A maior parte dos estudos realizados sobre os mecanismos da resposta imunitária à infecção por R. conorii e as interacções hospedeiro - agente etiológico têm sido elucidados com base em modelos animais. Poucos estudos têm sido efectuados em doentes e nenhum estudo prévio tinha sido realizado no sentido de avaliar localmente (escara/pele) quais os mediadores ou outras moléculas envolvidas na resposta imunitária às rickettsioses. Foi avaliado o nível de expressão génica de RNA mensageiro (RNAm)de diferentes citoquinas em amostras de pele de doentes com FEN pela técnica de PCR em tempo real.Os resultados deste estudo mostraram que, quando comparado com o grupo controlo, os 23 doentes analisados apresentavam níveis estatisticamente significativos, mais elevados de expressão génica de interferão (IFN-γ, Tumor necrosis factor (TFN-α, interleucina 10 (IL-10, RANTES (regulated by activation, normal T-cell-expressed and secreted chemokine)e indolamina 2-3 desoxigenase (IDO),uma enzima envolvida no controlo e limitação do crescimento intracelular das rickettsias, através da degradação do triptofano. Seis dos 23 doentes apresentaram ainda niveis de expressão elevados de óxido nítrico indutível (iNOS)que actua como microbicida. Encontrou-se uma correlação positiva entre a expressão de RNAm de TNF-α, γ, iNOS e IDO e os casos menos graves de FEN sugerindo um tipo de resposta imunitária tipo Th1, i.e. com papel protector na resposta à infecção.Verificou-se também que os valores de expressão genética do RNAm de IL-10, estavam inversamente correlacionados com a expressão do RNAm de TNF-α e IFN-γ. Os casos menos graves de FEN parecem assim envolver um balanço entre a resposta pró-inflamatória e anti-inflamatória. Já os níveis de expressão génica do RNAm de IL-10 estavam inversamente correlacionados com a expressão RNAm de TNF-α e IFN-γ. Os casos menos graves de FEN parecem assim envolver um balanço entre uma resposta pró-inflamatória e anti-inflamatória. Já os níveis de expressão RNAm da quimoquina RANTES foram estatisticamente mais elevados em doentes graves.Nesta dissertação é ainda descrita uma nova rickettsiose presente em Portugal, causada pela bactéria R. sibirica mongolitimonae, que foi identificada laboratorialmente por isolamento do agente, e por detecção do DNA em biopsia de pele. A presença deste agente foi ainda corroborada pela detecção em paralelo do mesmo agente no ixodídeos como R. africae like e em pulgas como R. felis e R.typhi alertam para a possibilidade de existência de outras rickettsioses que possam estar diagnosticadas em Portugal. Abstract: Mediterranean spotted fever (MSF), a tick-borne disease caused by Rickettsia conorii, is widley distributed in the Old World, being endemic in the southern Europe, Africa, Middle East, India and Pakistan. In Portugal two strains cause disease: R.conorii Malish and R.conorii Israeli spotted fever.Rhipicephalus sanguineus, the brown dog tick, is considered the main vector and reservoir. MSF is characterized by seasonality, and most of cases are encountered in late spring and summer, peaking in July and August. However, CEVDI/INSA laboratory has observed that the incidence of MSF cases has changed during winter season.The increasing annual averages of air temperatures and warmer and drier winters might have influenced the dynamics of the life cycle and activity of R. sanguineus, and indirectley the number MSF cases during the so called MSF off-season.In the period of 1989-2005, the incidence rate of MSF was 8.4/105 inhabitants, one of the highest rates compared with other endemic countries. In the Portugal during the same period, the highest incidence rates were reported in the districts of Bragança, with 56.8/105 inhabitants, and Beja, with 47.4/105 inhabitants. Severe cases of MSF are reported in 6% of the patients, but it seems that this pattern of disease in Portugal has been changing.This factor became more evident in 1997, with a reported case fatality rate of 32% and 18% in patients with MSF admited at Beja and Garcia Orta Hospitals, respectively. Although it was found that diabetes mellitus and delay in therapy have been implicated as a risk factor for death, the hypothesis was considered, that the new ISF strain isolated from Portugueses patients in the same year (1997)causes different or atypical clinical conorii Malish strain. The local (skin biopsies) immune response to R. conorii infection was also evaluated.A prospective study was performed to characterized epidemiological, clinical, laboratory features and determined risk factors for a fatal outcome. One hundred forty patients (51% patients were infected with Rickettsia conorii Malish stain and 49% with Israeli spotted fever strain)with diagnosis documented with identification of the causative rickettsial strain were admitted to 13 Portugueses Hospitals during 1994-2006.Comparison of the clinical manifestations of MSF caused by Malish and ISF strains revealed tremendous overlap that would not permit clinical recognition of the strain envolved, but an eschar was observed in a significantly higher percentage of patients with Malish than ISF strain.A fatal outcome was significantly more likely for patients with ISF strain infection meaning that ISF strain was more virulent than Malish strain, and also alcoholism was a host risk factor for a fatal outcome.The pathophysiology of a fatal outcome involved significantly greater incidence of petechial rash, gastrointestinal symptoms, confusion/obtundation, dehydration, tachypnea, hepatomegaly, leukocytosis, coagulopathy, azotemia, hyperbilirubinemia, and elevated hepatic enzymes and creatine kinase. Multivariate analysis revealed that acute renal failure and hyperbilirubinemia were most strong associated with a fatal oucome of infections with both strains.The immune response to R. conorii infection determined with both strains. The immune response to R. conorii infection determined by the expression levels of inflammatory and immune mediators in skin biopsies collected from untreated patients with Mediterranean spotted fever reveal that intralesional expression of mRNA of TNF-α, IFN-γ, IL-10, RANTES, and indoleamine-2, 3-dioxygenase (IDO)an enzyme involved in limiting rickettsial growth by tryptophan degradation, were elevated in skin of MSF patients compared to controls. Six patients had elevated levels of inducible nitric oxide synthase (NOS2, a source microbicidal nitric oxide.Positive correlations among TNF-α, IFN-γ, NOS2,IDO and mild-to-moderate disease suggested that type 1 polarization plays a protective role. Significantly high levels of intralesional IL-10 were inversely correlated with IFN-γ and TNF-α. The chemokine RANTES was significantly higher in patients with several MSF. It seems that MSF patients with mild-to-moderate disease have a strong and balanced intralesional pro-inflammatory and anti-inflammatory response, while severe disease is associated with higher chemokine expression.Whether these findings are simply a correlate of mild and severe disease or contribute to anti-rickettsial immunity and pathogenesis remains to be determined.In this dissertation is also described a new rickettsiois present in Portugal caused by R.sibirica mongolitimonae strain, identified based on agent isolation and DNA detection by PCR technique in a skin biopsy.The presence of this agent corroborated by its detection also in Rhipicephalus pusillus tick. Also, pathogenic tick and flea-borne rickettsial agents such as R. africae strain detected in Rhipicephalus bursa tick, and R.felis and R.typhi detected in different fleas species raise the alert for the possible existence of other rickettsioses in Portugal that might be underdiagnosed.

Multi-agent management system for electric vehicle charging

This paper proposes an implementation, based on a multi-agent system, of a management system for automated negotiation of electricity allocation for charging electric vehicles (EVs) and simulates its performance. The widespread existence of charging infrastructures capable of autonomous operation is recognised as a major driver towards the mass adoption of EVs by mobility consumers. Eventually, conflicting requirements from both power grid and EV owners require automated middleman aggregator agents to intermediate all operations, for example, bidding and negotiation, between these parts. Multi-agent systems are designed to provide distributed, modular, coordinated and collaborative management systems; therefore, they seem suitable to address the management of such complex charging infrastructures. Our solution consists in the implementation of virtual agents to be integrated into the management software of a charging infrastructure. We start by modelling the multi-agent architecture using a federated, hierarchical layers setup and as well as the agents' behaviours and interactions. Each of these layers comprises several components, for example, data bases, decision-making and auction mechanisms. The implementation of multi-agent platform and auctions rules, and of models for battery dynamics, is also addressed. Four scenarios were predefined to assess the management system performance under real usage conditions, considering different types of profiles for EVs owners', different infrastructure configurations and usage and different loads on the utility grid (where real data from the concession holder of the Portuguese electricity transmission grid is used). Simulations carried with the four scenarios validate the performance of the modelled system while complying with all the requirements. Although all of these have been performed for one charging station alone, a multi-agent design may in the future be used for the higher level problem of distributing energy among charging stations. Copyright (c) 2014 John Wiley & Sons, Ltd.

Modelação do comportamento dinâmico de sistemas barragem-fundação-albufeira: análise sísmica de uma barragem de abóbadas múltiplas

Trabalho Final de Mestrado elaborado no Laboratório Nacional de Engenharia Civil (LNEC) para a obtenção do grau de Mestre em Engenharia Civil pelo Instituto Superior de Engenharia de Lisboa no âmbito do protocolo de cooperação entre o ISEL e o LNEC

Bacterial enzymes and multi-enzymatic systems for cleaning-up dyes from the environment

Synthetic dyes are xenobiotic compounds that are being increasingly used in several industries, with special emphasis in the paper, textile and leather industries. Over 100,000 commercial dyes exist today and more than 7 × 105 tons of dyestuff is produced annually, of which 1–1.5 × 105 tons is released into the wastewaters (Rai et al in Crit Rev Environ Sci Tecnhol 35:219–238, 2005). Among these, azo dyes, characterized by the presence of one or more azo groups (–N=N–), and anthraquinonic dyes represent the largest and most versatile groups.

GPU implementation of the simplex identification via split augmented Lagrangian

Hyperspectral imaging can be used for object detection and for discriminating between different objects based on their spectral characteristics. One of the main problems of hyperspectral data analysis is the presence of mixed pixels, due to the low spatial resolution of such images. This means that several spectrally pure signatures (endmembers) are combined into the same mixed pixel. Linear spectral unmixing follows an unsupervised approach which aims at inferring pure spectral signatures and their material fractions at each pixel of the scene. The huge data volumes acquired by such sensors put stringent requirements on processing and unmixing methods. This paper proposes an efficient implementation of a unsupervised linear unmixing method on GPUs using CUDA. The method finds the smallest simplex by solving a sequence of nonsmooth convex subproblems using variable splitting to obtain a constraint formulation, and then applying an augmented Lagrangian technique. The parallel implementation of SISAL presented in this work exploits the GPU architecture at low level, using shared memory and coalesced accesses to memory. The results herein presented indicate that the GPU implementation can significantly accelerate the method's execution over big datasets while maintaining the methods accuracy.

Unsupervised hyperspectral signal subspace identification

Hyperspectral imaging sensors provide image data containing both spectral and spatial information from the Earth surface. The huge data volumes produced by these sensors put stringent requirements on communications, storage, and processing. This paper presents a method, termed hyperspectral signal subspace identification by minimum error (HySime), that infer the signal subspace and determines its dimensionality without any prior knowledge. The identification of this subspace enables a correct dimensionality reduction yielding gains in algorithm performance and complexity and in data storage. HySime method is unsupervised and fully-automatic, i.e., it does not depend on any tuning parameters. The effectiveness of the proposed method is illustrated using simulated data based on U.S.G.S. laboratory spectra and real hyperspectral data collected by the AVIRIS sensor over Cuprite, Nevada.

Estimation of rotational frequency response functions

As it is widely known, in structural dynamic applications, ranging from structural coupling to model updating, the incompatibility between measured and simulated data is inevitable, due to the problem of coordinate incompleteness. Usually, the experimental data from conventional vibration testing is collected at a few translational degrees of freedom (DOF) due to applied forces, using hammer or shaker exciters, over a limited frequency range. Hence, one can only measure a portion of the receptance matrix, few columns, related to the forced DOFs, and rows, related to the measured DOFs. In contrast, by finite element modeling, one can obtain a full data set, both in terms of DOFs and identified modes. Over the years, several model reduction techniques have been proposed, as well as data expansion ones. However, the latter are significantly fewer and the demand for efficient techniques is still an issue. In this work, one proposes a technique for expanding measured frequency response functions (FRF) over the entire set of DOFs. This technique is based upon a modified Kidder's method and the principle of reciprocity, and it avoids the need for modal identification, as it uses the measured FRFs directly. In order to illustrate the performance of the proposed technique, a set of simulated experimental translational FRFs is taken as reference to estimate rotational FRFs, including those that are due to applied moments.

Calibração automática para sistema de localização Multi-câmara

Mestrado em Engenharia Electrotécnica e de Computadores - Sistemas Autónomos

Análise numérica e experimental de um modelo dinâmico da ponte ferroviária de Antuã

Mestrado em Engenharia Civil – Ramo Estruturas

Aplicação do multi-layer stream mapping para a gestão da eficiência de recursos e produtividade de um sistema de produção

Mestrado em Engenharia Mecânica – Especialização Gestão Industrial

Schistosoma mansoni: identification of a 46KDa antigen of the schistosomular surface by monoclonal antibody

An IgG2a subclass monoclonal antibody, C6G9, was obtained by immunization of BALB/c mice with Schistosoma mansoni egg antigens. With this monoclonal antibody, it was possible to identify a schistosomular antigen with a molecular weight of 46 kilodaltons (KDa), and its expression being evaluated by means of indirect immunofluorescence. The antigen persisted in the integument of the developing schistosomulum, for at least 96 hours post-transformation. The monoclonal antibody also reacted with the cercaria surface, but not with that of adult worm. The C6G9 was also able to mediate significant levels of cytotoxicity in the presence of complement for newly transformed schistosomula.