Interspecific interactions between Coptotermes gestroi and Heterotermes tenuis (Isoptera: Rhinotermitidae) under laboratory conditions

Coptotermes gestroi and Heterotermes tenuis are termite pests. Both species have cryptic habits, and are known as subterranean termites. The aim of this study was to verify if food availability and alterations in the proportion of soldiers interfere in the interactions between these termites, since the introduced species C. gestroi occupies the same niche as the native species H. tenuis. Different bioassays were conducted in order to evaluate these interspecific interactions. The results showed that C. gestroi presented advantages in the occupation of territory in all bioassays and suggest a higher efficiency of this species in the search for alternative food sources, especially when the number of soldiers was higher than that of H. tenuis. Additionally, it is possible to conclude that food availability and the different proportion of soldiers involved in the interspecific confrontations interfere in the occupation of territory and in the agonistic behavior between these two species of termites.

Brood care and male behavior in queenless Acromyrmex subterraneus brunneus (Hymenoptera: Formicidae) colonies under laboratory conditions

In this study we describe and quantify the brood care performed by workers in queenless colonies of the leaf-cutting ant Acromyrmex subterraneus brunneus. Fifteen behavioral acts were recorded in the three colonies studied. The behavioral repertoire of males was more limited, with only four behavioral acts being observed: feeding through workers, collecting staphylae and self-feeding, mutual grooming between adults (worker-males), and self-grooming. Males were also found to be able to collect food (staphylae or fungal hyphae) from the fungus garden and to feed themselves, not requiring workers for this activity. This study contributes to a better understanding of the basic biology of leaf-cutting ant colonies, with the description and quantification of the activities performed by the members of a colony in a situation of the loss of the fertile caste.

Thermocycling effect on microhardness of laboratory composite resins

Tha aim of this study was to evaluate the thermocycling effect on microhardness of laboratory composite resins, 30 disks were fabricated, 5mm of diameter and 2mm of width, using 3 laboratory resins: G1 (n=10) - RESILAB MASTER (Wilcos-Brasil), G2 (n=10) - Vita VMLC (VITA Zahnfabrik-Germany), and G3 (n=10) - Vita Zeta (VITA Zahnfabrik-Germany). Vickers microhardness (HV) of all specimens was evaluated using a microhardness tester FM-700 (Future Tech- 50 g/10s). The specimens were measured before and after the thermocycling (3,000 times and 12,000 times - 5°/55°C±1). The microhardness values before cycling were (mean±SD): G1: 55.50±4.6; G2: 35.54±2.5; G3: 27.97±1.6; after 3,000 thermocycles: G1: 55.54±3.9; G2: 29.92±2.73; G3:21.01±1.4 and after 12,000 cycles G1: 54.27±3.2; G2: 30.91±1.6; G3: 23.81±0.9. Variance analysis (ANOVA) and Tukey's test was accomplished (p<0.05), the highest microhardness values were observed in G1: G2 and G3 showed reduction of microhardness values. It was concluded that, after thermocycling, the tested laboratory composites resins are susceptible to the decrease of surface microhardness.

Vibration and wear particles analysis in a test stand

Purpose - This paper aims to provide information on wear debris on oil and vibration analysis as predictive maintenance techniques. Design/methodology/ approach - The estate of a reducer is verified by analyzing the vibration and oil conditions of a test rig under some variables. Findings - According to the vibration and oil analysis it was found what was happening in the reducer without disassembling it. Originality/value - This paper gives information about two predictive maintenance techniques with a test rig. © Emerald Group Publishing Limited.

Population dynamics of Ectatomma planidens (Hymenoptera: Formicidae) under laboratory conditions

The ant Ectatomma planidens belongs to the subfamily Ectatomminae and it is abundantly found in the Neotropical region. Five colonies of such species were studied regarding their population dynamics in the laboratory, aiming to generate life tables and determine the entropy. The life expectancy curve of the workers indicated that in the first age interval, the value of e x = 142.55 approached the mean longevity of such workers (188.23 ± 110.99 days). Upon reaching this mean longevity, there was a greater decline in the life expectancy, which tends to decrease gradually with the time. The value found for entropy was H = 0.739 (between 0.5 and 1.0), and the survival pattern of these individuals was characterized by high mortality in the first intervals and growing life expectancy as time went by.

Experimental envenomation with Crotalus durissus terrificus venom in dogs treated with antiophidic serum - Part II: Laboratory aspects, electrocardiogram and histopathology

The present work shows laboratory aspects, electrocardiogram and histopathology results during experimental envenomation by Crotalus durissus terrificus in dogs treated with antiophidic serum. Twenty-one dogs were divided into three groups of seven animals each. Group I received 1mg/kg venom (sc); Group II received 1mg/kg venom (sc), 50mg antiophidic serum (iv) and fluid therapy including 0.9% NaCl solution (iv); and Group III received 1mg/kg venom (sc), 50mg antiophidic serum (iv) and fluid therapy including 0.9% NaCl solution containing sodium bicarbonate diluted to the dose of 4mEq/kg. Urinalysis showed brown urine, proteinuria, occult blood and myoglobinuria. Respiratory acidosis and hypotension were also observed. At the venom inoculation site, there was discreet edema, popliteal lymph node response, musculature presenting whitish areas and necrotic myositis with myoregenerative activity. There was not evidence of electrocardiographical and biochemical alterations.

Biological aspects of Amblyomma brasiliense (Acari: Ixodidae) under laboratory conditions

Although Amblyomma brasiliense Aragão 1908 has been reported as one of the most aggressive ticks to humans in Brazil, information about the biology of this tick species is virtually inexistent. This work reports data on the life cycle of A. brasiliense fed on rabbits and pigs and maintained in an incubator at 20°C, 90% RH and 12 h of light for off-host development. Tick yield of adult females fed on pigs and rabbits was 81.2% and 58.3%, respectively. Females fed on pigs had mean engorgement weight of 862.3 mg and egg mass of 208 mg, while females fed on rabbits had mean engorgement weight of 606.1 mg and egg mass of 160 mg; these values did not differ statistically between host species. Feeding period of female ticks fed on pigs (10 days) was significantly shorter than that on rabbits (17 days). Mean preoviposition period was slightly longer (35.9 days) for ticks fed on pigs than on rabbits (30 days). The minimum incubation period of eggs of ticks from both host species was similar and over 100 days. Egg production efficiency was low for females fed on both hosts (less than 30% and 20% for ticks from pigs and rabbits, respectively). More than 55% of larvae and 79% of nymphs fed on rabbits, set free inside the feeding chambers, engorged successfully. These ticks attained an engorgement weight of 1.3 and 18.2 mg, respectively, and fed for approximately 5 days. The minimum pre-molt period was 30 days for engorged larvae and over 44 days for nymphs. Molting success was low, less than 50% in the case of larvae and less than 20% for nymphs. Further studies are required to better determine the off-host requirements of this tick species. © 2008 Springer Science+Business Media B.V.

Biometria e qualidade fisiológica de sementes de diferentes matrizes de Tabebuia chrysotricha (Mart. Ex A. DC.) Stand I.

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Laboratory assessment of two active ingredients for control of coptotemes gestroi (Isoptera: Rhinotermitidae)

The subterranean termite Coptotermes gestroi Wasmann (Isoptera: Rhinotermitidae) is a pest of major economic importance in urban environments of southeastern Brazil. Compared to using pesticides for termite control, termite bait products target termites more specifically and also address environmental contamination issues. In this point of view, we performed two different bioassays in order to evaluate the efficacy of boric acid and fipronil against different populations of C. gestroi. The results showed that concentrations between 2000 and 3000 ppm of boric acid caused approximately 100 percent mortality in termites. Concentrations between 0.01 and 0.0001 ppm of fipronil resulted in 100% termite mortality after 2 wk exposure. The data displayed a fast mortality of termites contaminated with fipronil, even with small concentrations, and therefore it is not a suitable product to be used in baits against C. gestroi. The present study showed a delayed toxicity of boric acid against the subterranean termite C. gestroi which suggests a need for further field tests.

Single stage converters for low power stand-alone and grid-connected PV systems

This work presents the evaluation of different power electronic integrated converters suitable for photovoltaic applications, in order to reduce complexity and improve reliability. The rated voltages available in Photovoltaic (PV) modules have usually low values for applications such as regulated output voltages in stand-alone or grid-connected configurations. In these cases, a boost stage or a transformer will be necessary. Transformers have low efficiencies, heavy weights and have been used only when galvanic isolation is mandatory. Furthermore, high-frequency transformers increase the converter complexity. Therefore, the most usual topologies use a boost stage and one inverter stage cascaded. However, the complexity, size, weight, cost and lifetime might be improved considering the integration of both stages. In this context, some integrated converters are analyzed and compared in this paper in order to support future evaluations and trends for low power single-phase inverters for PV systems. Power decoupling, MPPT and Tri-State modulations are also considered. Finally, simulation and experimental results are presented and compared for the analyzed topologies. © 2011 IEEE.

Action of dwarf mucuna, pigeon pea and stylos anthes on weed under field and laboratory conditions

The quality and allelopathy properties of dwarf mucuna, dwarf pigeon pea and stylosanthes as cover crops on corn and weed species were evaluated. Seeds were sown in October 2007, with a control treatment, in 20 plots of 4×5m, with five replicates. Weed population was determined 30 and 60 days after sowing. At 90 days, plants were mowed and the residues left to remain on the plot. Fresh and dry mass of the cover crops were determined and the allelopathic potential of aqueous extract of their aerial part was tested. The extract was chemically characterized and applied on seeds of weeds and corn. The experimental design was completely randomized and averages compared by the Scott-Knott test at 5% significance. The cover crops showed to be effective in the control of weeds. The highest values in fresh and dry mass were obtained for dwarf pigeon pea, followed by dwarf mucuna; fresh mass increased 72 and 34%, respectively, compared to the control. The extract with dwarf mucuna affected arrowleaf sida germination. The use of green manure in the summer or between harvests ensures that crop rotation is carried out properly and warrants its benefits.

Remote laboratory experiment access via an RFID interface

In this paper, remote laboratory experiment access is considered through the use of radio frequency identification (RFID) technology. Contactless smart cards are used widely in many applications from travel cards through to building access control and inventory tracking. However, their use is considered here for access to electronic engineering experimentation in a remote laboratory setting by providing the ability to interface experiments through this contactless (wireless) connection means. A case study design is implemented to demonstrate such a means by incorporating experiment data onto a contactless smart card and accessing this via a card reader and web server arrangement. © 2012 IEEE.

Biosolid soil application: Toxicity tests under laboratory conditions

A large volume of generated sewage sludge makes its disposal a problem. The usage of sludge in agriculture is highlighted by a number of advantages. However, heavy metals and other toxic compounds may exercise harmful effects to soil organisms. This study evaluated the possible toxic effects of a biosolid sample, under laboratory conditions, for 30 days, using diplopods Rhinocricus padbergi and plants Allium cepa (onion) as test organisms. The data obtained demonstrated that the biosolid raw sample had genotoxic potential for Allium cepa root tip cells. In the diplopods exposed to biosolid sample, epithelium disorganization in the midgut and a reduction of the volume of the hepatic cells were observed after 7 days of exposure. After 30 days, the animals still showed a reduction of the volume of the hepatic cells, but in minor intensity. Allium cepa analysis showed genotoxicity, but this effect was reduced after 30 days of bioprocessing by diplopods. This study was important to know the effects as well as to determine how this waste could be applied concerning the soil living organisms and plants. © 2012 Cintya Ap. Christofoletti et al.

Pre-harvest sugarcane burning: Determination of emission factors through laboratory measurements

Sugarcane is an important crop for the Brazilian economy and roughly 50% of its production is used to produce ethanol. However, the common practice of pre-harvest burning of sugarcane straw emits particulate material, greenhouse gases, and tropospheric ozone precursors to the atmosphere. Even with policies to eliminate the practice of pre-harvest sugarcane burning in the near future, there is still significant environmental damage. Thus, the generation of reliable inventories of emissions due to this activity is crucial in order to assess their environmental impact. Nevertheless, the official Brazilian emissions inventory does not presently include the contribution from pre-harvest sugarcane burning. In this context, this work aims to determine sugarcane straw burning emission factors for some trace gases and particulate material smaller than 2.5μm in the laboratory. Excess mixing ratios for CO2, CO, NOX, UHC (unburned hydrocarbons), and PM2.5 were measured, allowing the estimation of their respective emission factors. Average estimated values for emission factors (g kg-1 of burned dry biomass) were 1,303 ± 218 for CO2, 65 ± 14 for CO, 1.5 ± 0.4 for NOX, 16 ± 6 for UHC, and 2.6 ± 1.6 for PM2.5. These emission factors can be used to generate more realistic emission inventories and therefore improve the results of air quality models. © 2012 by the authors; licensee MDPI, Basel, Switzerland.