Time Dependent Operator-split and Unsplit Schemes for One Dimensional Premixed Flames

This paper is concerned with a study of an operator split scheme and unsplit scheme for the computation of adiabatic freely propagating one-dimensional premixed flames. The study uses unsteady method for both split and unsplit schemes employing implicit chemistry and explicit diffusion, a combination which is stable and convergent. Solution scheme is not sensitive to the initial starting estimate and provides steady state even with straight line profiles (far from steady state) in small number of time steps. Two systems H2-Air and H2-NO (involving complex nitrogen chemistry) are considered in presentinvestigation. Careful comparison shows that the operator split approach is slightly superior than the unsplit when chemistry becomes complex. Comparison of computational times with those of existing steady and unsteady methods seems to suggest that the method employing implicit-explicit algorithm is very efficient and robust.

Unsteady mixed convection over two-dimensional and axisymmetric bodies

The unsteady laminar incompressible mixed convection flow over a two-dimensional body (cylinder) and an axisymmetric body (sphere) has been studied when the buboyancy forces arise from both thermal and mass diffusion and the unsteadiness in the flow field is introduced by the time dependent free stream velocity. The nonlinear partial differential equations with three independent variables governing the flow have been solved numerically using an implicit finite-difference scheme in combination with the quasilinearization technique. The results indicate that for the thermally assisting flow the local skin friction, heat transfer and mass diffusion are enhanced when the buoyancy force from mass diffusion assists the thermal buoyancy force. But this trend is opposite for the thermally opposing flow. The point of zero skin friction moves upstream due to unsteadiness. No singularity is observed at the point of zero skin friction for unsteady flow unlike steady flow. The flow reversal is observed after a certain instant of time. The velocity overshoot occurs for assisting flows.

Polarization Caging in Diffusion-Controlled Electron Transfer Reactions in Solution

In some bimolecular diffusion-controlled electron transfer (ET) reactions such as ion recombination (IR), both solvent polarization relaxation and the mutual diffusion of the reacting ion pair may determine the rate and even the yield of the reaction. However, a full treatment with these two reaction coordinates is a challenging task and has been left mostly unsolved. In this work, we address this problem by developing a dynamic theory by combining the ideas from ET reaction literature and barrierless chemical reactions. Two-dimensional coupled Smoluchowski equations are employed to compute the time evolution of joint probability distribution for the reactant (P-(1)(X,R,t)) and the product (p((2))(X,R,t)), where X, as is usual in ET reactions, describes the solvent polarization coordinate and R is the distance between the reacting ion pair. The reaction is described by a reaction line (sink) which is a function of X and R obtained by imposing a condition of equal energy on the initial and final states of a reacting ion pair. The resulting two-dimensional coupled equations of motion have been solved numerically using an alternate direction implicit (ADI) scheme (Peaceman and Rachford, J. Soc. Ind. Appl. Math. 1955, 3, 28). The results reveal interesting interplay between polarization relaxation and translational dynamics. The following new results have been obtained. (i) For solvents with slow longitudinal polarization relaxation, the escape probability decreases drastically as the polarization relaxation time increases. We attribute this to caging by polarization of the surrounding solvent, As expected, for the solvents having fast polarization relaxation, the escape probability is independent of the polarization relaxation time. (ii) In the slow relaxation limit, there is a significant dependence of escape probability and average rate on the initial solvent polarization, again displaying the effects of polarization caging. Escape probability increases, and the average rate decreases on increasing the initial polarization. Again, in the fast polarization relaxation limit, there is no effect of initial polarization on the escape probability and the average rate of IR. (iii) For normal and barrierless regions the dependence of escape probability and the rate of IR on initial polarization is stronger than in the inverted region. (iv) Because of the involvement of dynamics along R coordinate, the asymmetrical parabolic (that is, non-Marcus) energy gap dependence of the rate is observed.

Classification of Protein Kinases on the Basis of Both Kinase and Non-Kinase Regions

Background: Protein phosphorylation is a generic way to regulate signal transduction pathways in all kingdoms of life. In many organisms, it is achieved by the large family of Ser/Thr/Tyr protein kinases which are traditionally classified into groups and subfamilies on the basis of the amino acid sequence of their catalytic domains. Many protein kinases are multidomain in nature but the diversity of the accessory domains and their organization are usually not taken into account while classifying kinases into groups or subfamilies. Methodology: Here, we present an approach which considers amino acid sequences of complete gene products, in order to suggest refinements in sets of pre-classified sequences. The strategy is based on alignment-free similarity scores and iterative Area Under the Curve (AUC) computation. Similarity scores are computed by detecting common patterns between two sequences and scoring them using a substitution matrix, with a consistent normalization scheme. This allows us to handle full-length sequences, and implicitly takes into account domain diversity and domain shuffling. We quantitatively validate our approach on a subset of 212 human protein kinases. We then employ it on the complete repertoire of human protein kinases and suggest few qualitative refinements in the subfamily assignment stored in the KinG database, which is based on catalytic domains only. Based on our new measure, we delineate 37 cases of potential hybrid kinases: sequences for which classical classification based entirely on catalytic domains is inconsistent with the full-length similarity scores computed here, which implicitly consider multi-domain nature and regions outside the catalytic kinase domain. We also provide some examples of hybrid kinases of the protozoan parasite Entamoeba histolytica. Conclusions: The implicit consideration of multi-domain architectures is a valuable inclusion to complement other classification schemes. The proposed algorithm may also be employed to classify other families of enzymes with multidomain architecture.

Unsteady boundary layer flow on a cylinder in a channel

The unsteady laminar incompressible nonsimilar boundary layer flow over a circular cylinder placed symmetrically inside a channel has been studied when the unsteadiness and nonsimilarity are due to the free stream velocity. The nonlinear partial differential equations with three independent variables have been solved numerically using an implicit finite-difference in combination with the quasilinearization technique. It is found that the channel blockage parameter controls the transfer of heat from the cylinder and delays separation. The skin friction and heat transfer are significantly affected by the free stream velocity distributions.

Iäkkäiden lääkehoitoihin liittyvien riskien kartoittaminen – Arviointityökalun kehittäminen Delfoi-menetelmällä

Tutkimuksen taustalla on väestön ikääntyminen ja iäkkäiden lisääntynyt lääkkeiden käyttö. Ikääntyminen aiheuttaa elimistössä useita muutoksia, jotka voivat muuttaa lääkevastetta ja altistaa potilaan haittavaikutuksille. Iäkkäillä riski joutua sairaalaan lääkkeen haittavaikutuksen vuoksi on arvioitu olevan neljä kertaa suurempi kuin nuoremmilla. Monet lääkkeiden yhteis- ja haittavaikutukset olisivat ehkäistävissä välttämällä iäkkäillä tiettyjä lääkeaineita. Iäkkäiden lääkehoitojen seurantaa ja arviointia varten on kehitetty erilaisia suosituksia sekä Suomessa että kansainvälisesti. Tutkimuksen tavoitteena oli luoda Suomen oloihin soveltuva, hoitajien koulutettuina käytettävissä oleva, avohoidon yli 65-vuotiaiden iäkkäiden lääkitykseen liittyviä riskejä arvioiva työkalu. Työkalun avulla voitaisiin löytää ne potilaat, joiden lääkitykseen liittyy paljon riskejä. Tutkimuksen aineistona olivat laaja kansainvälinen kirjallisuuskatsaus iäkkäiden lääkehoitoihin liittyvistä tekijöistä sekä asiantuntijakommentoinnit, joiden perusteella luotiin alustava arviointityökalu. Alustava arviointityökalu validoitiin kolmikierroksisella Delfoi-menetelmällä. Delfoi-menetelmä on laadullinen konsensusmenetelmä, joka perustuu asiantuntijoiden arvioihin tutkittavasta asiasta. Kaksi ensimmäistä Delfoi-kierrosta mittasivat alustavan arviointityökalun kohtien soveltuvuutta ja kolmas kierros kohtien tärkeyttä arvioitaessa iäkkään lääkityksiin liittyviä riskejä. Tutkimuksen Delfoi-kierroksien vastaajiksi pyydettiin 33 geriatrian asiantuntijaa, joista vastaajiksi lupautui 11 lääkäriä, 3 proviisoria ja 4 sairaanhoitajaa. Delfoi-kierrosten tuloksia analysoitiin sekä kvantitatiivisesti että kvalitatiivisesti. Tutkimuksen tuloksena saatu arviointityökalu käsittää 19 iäkkäiden lääkehoitoa arvioivaa kohtaa. Asiantuntijapaneelin mukaan kaikki arviointityökalun lääkitykseen liittyviä riskejä mittaavat kohdat ovat tärkeitä tai jokseenkin tärkeitä, joten työkalun voidaan olettaa olevan validi mitattaessa lääkitykseen liittyviä riskejä. Jatkotutkimuksissa työkalun käytettävyyttä sekä riskien mittaamiskykyä tulee testata sekä arviointityökalun käyttäjien että potilaiden keskuudessa. Kehitettyä työkalua voidaan jatkossa hyödyntää esimerkiksi koulutustarkoituksissa sen varsinaisen käyttötarkoituksen lisäksi. Työkalun avulla iäkkäiden lääkehoitoa voidaan tulevaisuudessa toteuttaa entistä turvallisemmin ja tarkoituksenmukaisemmin.

Unsteady laminar compressible boundary-layer flow at a three-dimensional stagnation point

Unsteady laminar compressible boundary-layer flow with variable properties at a three-dimensional stagnation point for both cold and hot walls has been studied for the case when the velocity of the incident stream varies arbitrarily with time. The partial differential equations governing the flow have been solved numerically using an implicit finite-difference scheme. Computations have been carried out for two particular unsteady free-stream velocity distributions: (i) an accelerating stream and (ii) a fluctuating stream. The results indicate that the variation of the density-viscosity product across the boundary layer, the wall temperature and the nature of stagnation point significantly affect the skin friction and heat transfer.

Miniature Compliant Grippers With Vision-Based Force Sensing

This paper is concerned with grasping biological cells in aqueous medium with miniature grippers that can also help estimate forces using vision-based displacement measurement and computation. We present the design, fabrication, and testing of three single-piece, compliant miniature grippers with parallel and angular jaw motions. Two grippers were designed using experience and intuition, while the third one was designed using topology optimization with implicit manufacturing constraints. These grippers were fabricated using different manufacturing techniques using spring steel and polydimethylsiloxane ( PDMS). The grippers also serve the purpose of a force sensor. Toward this, we present a vision-based force-sensing technique by solving Cauchy's problem in elasticity using an improved algorithm. We validated this technique at the macroscale, where there was an independent method to estimate the force. In this study, the gripper was used to hold a yeast ball and a zebrafish egg cell of less than 1 mm in diameter. The forces involved were estimated to be about 30 and 10 mN for the yeast ball and the zebrafish egg cell, respectively.

After interpretation.

Using 58 audio recorded sessions of psychoanalysis (coming from two analysts and three patients) as data and conversation analysis as method, this paper shows how psychoanalysts deal with patients’ responses to interpretations. After the analyst offers an interpretation, the patient responds: at that point (in the “third position”), the analysts recurrently modify the tenor of the description from what it was in the patients’ responses. They intensify the emotional valence of the description, or they reveal layers of the patients’ experience other than those that the patient reported. Both are usually accomplished in an implicit, non-marked way, and they discreetly index possible opportunities for the patients to modify their understandings of the initial interpretation. Although the patients usually do not fully endorse these modifications, the data available suggests that during the sessions that follow, the participants do work with the aspects of patients’ experience that the analyst highlighted. In discussion, it is suggested that actions that the psychoanalysts produce in therapy, such as choices of turn design in third position, may be informed by working understanding of the minds and mental conflicts of individual patients, alongside the more general therapeutic model of mind they hold to.

Effect of process variables on die-billet temperature history in a slow speed hot coining type process

A computer code is developed as a part of an ongoing project on computer aided process modelling of forging operation, to simulate heat transfer in a die-billet system. The code developed on a stage-by-stage technique is based on an Alternating Direction Implicit scheme. The experimentally validated code is used to study the effect of process specifics such as preheat die temperature, machine ascent time, rate of deformation, and dwell time on the thermal characteristics in a batch coining operation where deformation is restricted to surface level only.

Numerical estimation of hotspot temperatures in electrodes subjected to pulsed electron beam heating in vacuum

A numerical solution for the transient temperature distribution in a cylindrical disc heated on its top surface by a circular source is presented. A finite difference form of the governing equations is solved by the Alternating Direction Implicit (ADI) time marching scheme. This solution has direct applications in analyzing transient electron beam heating of target materials as encountered in the prebreakdown current enhancement and consequent breakdown in high voltage vacuum gaps stressed by alternating and pulsed voltages. The solution provides an estimate of the temperature for pulsed electron beam heating and the size of thermally activated microparticles originating from anode hot spots. The calculated results for a typical 45kV (a.c.) electron beam of radius 2.5 micron indicate that the temperature of such spots can reach melting point and could give rise to microparticles which could initiate breakdown.

Hypersonic stagnation‐point boundary layers with massive blowing in the presence of a magnetic field

The effect of massive blowing rates on the steady laminar hypersonic boundary‐layer flow of an electrically conducting fluid in the stagnation region of an axisymmetric body with an applied magnetic field has been studied. The governing equations have been solved numerically by combining the implicit finite‐difference scheme with the quasi‐linearization technique. It is observed that the effect of massive blowing rates is to remove the viscous layer away from the boundary, whereas the effect of the magnetic field is just the opposite. It is also found that the velocity overshoot increases with blowing rates and also with magnetic field. The effect of the variation of the density‐viscosity product across the boundary layer is strong only when the blowing rate is small, but for the massive blowing rate the effect is negligible.

Boundary layer swirling flow through a conical hydrocyclone

The paper deals with the flow and heat-transfer problem of a steady axisymmetric laminar incompressible boundary layer swirling flow of a fluid through a conical hydrocyclone. The implicit finitedifference scheme is used to solve the partial differential equations governing the flow. The effect of swirl is found to be more pronounced on the longitudinal skin friction than on the tangential skin friction and heat transfer. The skin friction and heat transfer increase with swirl or with longitudinal distance. Swirl also gives rise to velocity overshoot in the longitudinal velocity profiles and the magnitude of the velocity overshoot increases as the swirl parameter increases. The results are found to be in good agreement with those of the local nonsimilarity and momentum integral methods but they differ appreciably from those of the local similarity method except for the longitudinal skin friction which is fairly in good agreement with that of the local similarity method.Die Arbeit beschäftigt sich mit der Strömung und dem Wärmeübergang in einem konischen Zyklon unter der Voraussetzung stationärer, achsensymmetrischer, laminarer, inkompressibler Grenzschichtströmung. Ein implizites Differenzenverfahren wird benutzt, um die partiellen Differentialgleichungen zu lösen. Der Einfluß des Dralls ist besonders ausgeprägt auf die longitudinale Komponente der Oberflächenreibung, weniger dagegen bei der tangentialen Komponente und beim Wärmeübergang. Die Oberflächenreibung und der Wärmeübergang nehmen zu mit dem Drall, sowie mit dem longitudinalen Abstand. Der Drall erzeugt ein Überschießen der Geschwindigkeit in der longitudinalen Abstand. Der Drall erzeugt ein Überschießen der Geschwindigkeit in der Längsrichtung. Die Größe des Überschusses nimmt mit wachsendem Drallparameter zu. Die Resultate stimmen gut mit den Ergebnissen der Theorie der lokalen Nichtähnlichkeit und der Impulsintegralmethode überein. Dagegen weichen sie mit Ausnahme der longitudinalen Komponente der Oberflächenreibung beträchtlich von den Resultaten der Theorie der lokalen Ähnlichkeit ab.

Operationalizing Supply Chain vs. Supply Chain Competion

Competition is an immensely important area of study in economic theory, business and strategy. It is known to be vital in meeting consumers’ growing expectations, stimulating increase in the size of the market, pushing innovation, reducing cost and consequently generating better value for end users, among other things. Having said that, it is important to recognize that supply chains, as we know it, has changed the way companies deal with each other both in confrontational or conciliatory terms. As such, with the rise of global markets and outsourcing destinations, increased technological development in transportation, communication and telecommunications has meant that geographical barriers of distance with regards to competition are a thing of the past in an increasingly flat world. Even though the dominant articulation of competition within management and business literature rests mostly within economic competition theory, this thesis draws attention to the implicit shift in the recognition of other forms of competition in today’s business environment, especially those involving supply chain structures. Thus, there is popular agreement within a broad business arena that competition between companies is set to take place along their supply chains. Hence, management’s attention has been focused on how supply chains could become more aggressive making each firm in its supply chain more efficient. However, there is much disagreement on the mechanism through which such competition pitching supply chain against supply chain will take place. The purpose of this thesis therefore, is to develop and conceptualize the notion of supply chain vs. supply chain competition, within the discipline of supply chain management. The thesis proposes that competition between supply chains may be carried forward via the use of competition theories that emphasize interaction and dimensionality, hence, encountering friction from a number of sources in their search for critical resources and services. The thesis demonstrates how supply chain vs. supply chain competition may be carried out theoretically, using generated data for illustration, and practically using logistics centers as a way to provide a link between theory and corresponding practice of this evolving competition mode. The thesis concludes that supply chain vs. supply chain competition, no matter the conceptualization taken, is complex, novel and can be very easily distorted and abused. It therefore calls for the joint development of regulatory measures by practitioners and policymakers alike, to guide this developing mode of competition.

Sanomattakin selvää? : "Ja", "mutta" ja "että" puheenvuoron lopussa

This study describes the use of utterances ending in the conjunctions "ja" (‘and’), "mutta" (‘but’) or "että" (‘that’/‘so’) in Finnish conversation. It argues that in spoken interaction, these conjunctions are not only used as linking elements but also as final elements in interactional and linguistic units. In contrast to more traditional views, the study shows that final conjunctions do not always indicate incompleteness or project continuation, but that they can also form recognizable points for turn-transition. In these contexts they can be reanalyzed as final particles that leave some aspect of the turn implicit. The data for the study consist of audio-taped telephone conversations and videotaped service encounters. Situated within the framework of conversation analysis and interactional linguistics, the study discusses the interactional uses of conjunction-final turns and their recognizability as possibly complete units in talk-in-interaction. The analysis of conjunction-final utterances focuses on 1) participant orientation, and 2) their recurrent contexts of use. The results show that the recipients of conjunction-final utterances often treat them as sufficient and complete in their contexts by displaying understanding or agreement. When the same speaker continues after a pause, it is not always clear that the continuation was "planned" in advance; it can also be reactive to lack of expected uptake. In these cases, a turn can be analyzed as potentially complete even if the same speaker decides to continue after a pause. In the light of these observations, the study confirms the incremental nature of spoken language. All the final conjunctions under examination have recurrent and recognizable contexts of use. Most typically, a conjunction-final utterance is produced in the service of some earlier claim by the same speaker. The conjunction-final utterance may 1) specify the earlier claim with a detailing list ("ja"), 2) legitimize it by presenting grounds ("että") or 3) partly back down from it by making a concession ("mutta"). Together with the earlier claim, conjunction-final utterances form recognizable discourse patterns that are used for argumentative purposes. In these contexts, conjunctions are used to relinquish the floor instead of functioning as turn-holding devices. In conclusion, the study discusses the emergence of conjunctions as final particles – how their development can be explained. Conjunction-type final particles emerge from recurring situations in which the future course of the conjunction-final turn-so-far is clear enough to remain unsaid, to be left to inference. More specifically, this ability to leave something to inference often lies in the fixed discourse patterns that are conventionalized and predictable and thus reducible.