Effect of bleaching agent on dental ceramics roughness.

The aim of this study was to assess the effect of bleaching agents (10% and 16% carbamide peroxide) on the roughness of two dental ceramics in vitro, and to analyze the surface by scanning electronic microscopy (SEM). Two bleaching agents (10% and 16%/Whiteness, FGM Gel) and two microparticle feldspathic ceramics (Vita VM7 and Vita VM13) were used. Forty disks of Vita VM7 and Vita VM13 ceramic were manufactured, measuring 4 mm in diameter and 4 mm high, in accordance with the manufacturers' recommendations, and were divided into 4 groups (n = 10): (1) VM7 + Whiteness 10%; (2) VM7 + Whiteness 16%; (3) VM13 + Whiteness 10%; (4) VM13 + Whiteness 16%. The bleaching agent was applied for 8 hours a day for 15 days and during the intervals the test specimens were stored in distilled water at 37 degrees C. The roughness (Ra) of the test specimens was evaluated before and after exposure to the bleaching agents using a laser roughness meter and the topographic description was analyzed by SEM. The statistical analysis of roughness data showed significant differences in the VM7 groups, using paired t-test, p = 0.05 (VM7 + Whiteness 10%: p = 0.002; VM7 + Whiteness 16%: p = 0.001) and two-sample t-test (VM7 p = 0.047), and no significant difference was found among VM13 groups. The qualitative SEM analysis showed different degrees of surface changes. The results suggest that the roughness of the tested ceramic surfaces increased after exposure to the bleaching agents.

A multi-agent architecture for intelligent data analysis

The present study introduces a multi-agent architecture designed for doing automation process of data integration and intelligent data analysis. Different from other approaches the multi-agent architecture was designed using a multi-agent based methodology. Tropos, an agent based methodology was used for design. Based on the proposed architecture, we describe a Web based application where the agents are responsible to analyse petroleum well drilling data to identify possible abnormalities occurrence. The intelligent data analysis methods used was the Neural Network.

Annona sp: Plants with multiple applications as alternative medicine - a review

Annona species have been used as a natural remedy for a variety of illnesses with antiparasitic, antispasmodic, antidiarrheal, antiulcer, sedative, analgesic, hypotensive, and vermifugal effects. These properties are due to the presence of a number of bioactive compounds on the leaves, fruit, seeds, and stem. The aim of this review is to show the main species of Annona, their medicinal properties and the chemical constituents that may be related to these effects. In the leaves it is possible to find acetogenins, annopentocins A, B, and C, cis- and trans-annomuricin-D-ones, goniothalamicin, arianacin, and javoricin, related to anticancer properties. Quercetin-3-O-glucoside, also found in the leaves mediates antidiabetic and antioxidative effects. In the fruit are found annonaine, nornuciferine and asimilobine, associated to antidepressive effects. In the seeds are found muricatetrocin A and muricatetrocin B, longifolicin, corossolin, corossolone, uvarigrandin A, bullatacin, squamotatin. These acetogenins are associated with anticancer effects. Cyclosquamosin B, quercetin, and cyclosquamosin from the seeds have respectively vasorelaxant, antithyroidal and, antiinflammatory activity. In the stem parts there are several components as N-trans-feruloyltyramine, N-p-coumaroyltyramine, and N-trans-caffeoyltyramine, lignans, syringaresinol, syringaldehyde, beta-sitosterol and beta-sitosterol-beta-D-glucoside which exhibit antiplatelet aggregation activity. Copaene, patchoulane, 1H-cycloprop (e) azulene and kaur-16-en-19-oic acid found in the barks exhibit significant central as well as peripheral analgesic and antiinflammatory activities. The properties of the biological compounds in Annona species support information that may provide validation for its medicinal uses, but further studies should be performed to establish ideal and safe doses of consumption to ensure the effectiveness of the benefits. © 2012 Bentham Science Publishers.

A multi-agent system with a percolation approach to simulate the driving pattern of Plug-In ELectric Vehicles

A multi-agent system with a percolation approach to simulate the driving pattern of Plug-In Electric Vehicle (PEV), especially suited to simulate the PEVs behavior on any distribution systems, is presented. This tool intends to complement information about the driving patterns database on systems where that kind of information is not available. So, this paper aims to provide a framework that is able to work with any kind of technology and load generated of PEVs. The service zone is divided into several sub-zones, each subzone is considered as an independent agent identified with corresponding load level, and their relationships with the neighboring zones are represented as network probabilities. A percolation approach is used to characterize the autonomy of the battery of the PVEs to move through the city. The methodology is tested with data from a mid-size city real distribution system. The result shows the sub-area where the battery of PEVs will need to be recharge and gives the planners of distribution systems the necessary input for a medium to long term network planning in a smart grid environment. © 2012 IEEE.

Incorporation of dithiooxamide as a complexing agent into cellulose for the removal and pre-concentration of Cu(II) and Cd(II) ions from natural water samples

The present study describes the incorporation of a complexing agent, dithiooxamide, into microcrystalline cellulose for use in the pre-concentration of Cu(II) and Cd(II) ions from aqueous samples. The FTIR spectrum of the adsorbent exhibited an absorption band in the region of 800 cm-1, which confirmed the binding of the silylating agent to the matrix. Elemental analysis indicated the amount of 0.150 mmol g-1 of the complexing agent. The adsorption data were fit to the modified Langmuir equation, and the maximum amount of metal species extracted from the solution, Ns, was determined to be 0.058 and 0.072 mmol g-1 for Cu(II) and Cd(II), respectively. The covering fraction φ, which was 0.39 and 0.48 for Cu(II) and Cd(II), respectively, was used to estimate a 1:2 (metal:ligand) ratio in the formed complex, and a binding model was proposed based on this information. The adsorbent was applied in the pre-concentration of natural water samples and exhibited an enrichment factor of approximately 50-fold for the species studied, which enabled its use in the analysis of trace metals in aqueous samples. The system was validated by the analysis of certified standard (1643e), and the adsorbent was stable for more than 20 cycles, thus enabling its safe reutilization. © 2012 Elsevier B.V. All rights reserved.

Effect of low-level laser therapy on odontoblast-like cells exposed to bleaching agent

The aim of the present study was to evaluate the effect of low-level laser therapy (LLLT) on odontoblast-like MDPC-23 cells exposed to carbamide peroxide (CP 0.01 %-2.21 μg/mL of H2O2). The cells were seeded in sterile 24-well plates for 72 h. Eight groups were established according to the exposure or not to the bleaching agents and the laser energy doses tested (0, 4, 10, and 15 J/cm2). After exposing the cells to 0.01 % CP for 1 h, this bleaching solution was replaced by fresh culture medium. The cells were then irradiated (three sections) with a near-infrared diode laser (InGaAsP-780 ± 3 nm, 40 mW), with intervals of 24 h. The 0.01 % CP solution caused statistically significant reductions in cell metabolism and alkaline phosphate (ALP) activity when compared with those of the groups not exposed to the bleaching agent. The LLLT did not modulate cell metabolism; however, the dose of 4 J/cm2 increased the ALP activity. It was concluded that 0.01 % CP reduces the MDPC-23 cell metabolism and ALP activity. The LLLT in the parameters tested did not influence the cell metabolism of the cultured cells; nevertheless, the laser dose of 4 J/cm2 increases the ALP activity in groups both with and without exposure to the bleaching agent. © 2013 Springer-Verlag London.

Glass foam of macroporosity using glass waste and sodium hydroxide as the foaming agent

Glass foams using float glass waste and sodium hydroxide were produced. The influence of the sodium hydroxide amount in the foam formulation was studied. Titanium dioxide was used as a strengthening agent. The variations of temperature, heating rate and sintering time were investigated during the synthesis process. Open porosity was estimated using mercury porosimetry. The morphology of the glass foams was evaluated using scanning electron microscopy, phase formation was studied using X-ray diffraction, and chemical composition was estimated using X-ray fluorescence. As a result, glass foams with macroporosity were obtained. Since the glass foams used glass waste as reactant, the results suggest the development of an alternative route for glass recycling. © 2012 Elsevier Ltd and Techna Group S.r.l.

Production of a bioherbicide agent in liquid and solid medium and in a biphasic cultivation system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação dos fatores de risco de quedas em mulheres na pós-menopausa inicial

OBJETIVO: Foi avaliar a frequência e os fatores de risco de quedas em mulheres na pós-menopausa. MÉTODOS: Estudo clínico, transversal, envolvendo 358 mulheres (idade entre 45 e 65 anos e amenorreia >12 meses) com tempo de pós-menopausa <10 anos. Os critérios de exclusão foram: doença neurológica ou músculo esquelético, vestibulopatias, hipertensão arterial não controlada, hipotensão postural, déficit visual sem correção, uso de medicamentos (sedativos e hipnóticos). A queda foi definida como mudança de posição inesperada, não intencional, que faz com que o indivíduo permaneça em nível inferior à posição inicial. Foram analisados o histórico de quedas (últimos 24 meses) e as características clínicas, antropométricas (índice de massa corpórea (IMC) e circunferência da cintura (CC)) e densidade mineral óssea. Na comparação segundo grupo de mulheres com e sem histórico de queda, foi empregado o Teste do Qui-quadrado ou Exato de Fisher e regressão logística com cálculo do odds ratio (OR). RESULTADOS: Entre as mulheres incluídas, 48,0% (172/358) referiram queda, com fratura em 17,4% (30/172). A queda ocorreu dentro de casa em 58,7% (101/172). A média de idade foi 55,7±6,5 anos, tempo de menopausa de 5,8±3,5anos, IMC 28,3±4,6 kg/m² e CC 89,0±11,4 cm. Foi observada maior frequência de tabagismo e diabetes entre as mulheres com histórico de quedas quando comparadas àquelas sem queda, de 25,6 versus 16,1% e 12,8 versus 5,9%, respectivamente (p<0,05). Na análise multivariada em função das variáveis clínicas influentes, o risco de queda aumentou com o tabagismo atual (OR 1,93; IC95% 1,01-3,71). Demais variáveis clínicas e antropométricas não influenciaram no risco de queda. CONCLUSÕES: Em mulheres na pós-menopausa inicial houve expressiva frequência de quedas. O tabagismo foi indicador clínico de risco para queda. Com o reconhecimento de fatores determinantes para queda, medidas preventivas são importantes, como a orientação de abolir o tabagismo.

Effects of Light Activation, Agent Concentration, and Tooth Thickness on Dental Sensitivity After Bleaching

Examining three bleaching systems, this in vivo clinical trial evaluated the relationship among tooth sensitivity, light activation, and agent concentration, and it correlated dental sensitivity with tooth thickness.Materials and Methods: Eighty-seven volunteer patients were included. Inclusion criteria were the presence of anterior teeth without restorations as well as the absence of a previous bleaching experience and absence of non-carious cervical lesions or dental pain. Exclusion criteria included pregnancy or breastfeeding, a maximum of TF3 hypoplasia, tetracycline-fluorosis stains, malpositioned teeth, orthodontic treatment, periodontal disease, and/or analgesic/anti-inflammatory intake. Patients were randomly assigned to three bleaching groups: Group A (n=25) was treated with 15% H2O2 and nitrogenous-titanium-dioxide and was light activated (Lase Peroxide Lite, DMC, SaoCarlos, Sao Paulo, Brazil); Group B (n=27) was treated with 35% H2O2 and was light activated (Lase Peroxide Sensy, DMC); and Group C (n=35) was treated with 35% H2O2 (White Gold Office, Dentsply, 38West Clark Ave., Milford, USA) without light activation. Tooth sensitivity (TS) was self-reported by the patients using the visual analog scale (VAS) at baseline (TSO), immediately after treatment (TSI), and at seven days after treatment (TS7). In 46 patients, tooth thickness was determined by computed tomography. TSO, TSI, and TS7 were compared between the A and B groups to determine the effect of concentration and between the B and C groups to determine the effect of light using analysis of covariance. The correlation between tooth thickness and TSI was determined by Spearman Rho test (SPSS 15).Results: Eighty-seven patients were evaluated at baseline, and 61 were evaluated at seven days. Separated by groups, tooth sensitivity, expressed as VAS value at the time points TS0, TS1, and TS7, respectively, were as follows: Group A: 13.76 +/- 13.53, 24.40 +/- 25.24, and 5.94 +/- 5.5; Group B: 15.07 +/- 18.14, 42.4 +/- 31.78, and 8.68 +/- 17.99; and Group C: 10.80 +/- 14.83, 31.51 +/- 29.34, and 7.24 +/- 9.2. Group A showed significantly lower tooth sensitivity than group B at TSI (p=0.032). No differences were observed in the tooth sensitivities between groups B and C. No correlation was encountered between tooth thickness and tooth sensitivity immediately after treatment (Rho=-0.088,p=0.563). The median tooth thickness was 2.78 +/- 0.21 mm.Conclusions: Increases in the concentration of bleaching agents directly affect tooth sensitivity, and LED/laser activation and tooth thickness are not correlated with tooth sensitivity after dental bleaching.

Confidence and the Stock Market: An Agent-Based Approach

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sedative and clinical effects of the pharmacopuncture with xylazine in dogs

PURPOSE: To investigate the sedative and clinical effects of the pharmacopuncture with xylazine, compared to the conventional dose of a intramuscular injection in dogs.METHODS: Twelve dogs were randomly distributed in two groups of six animals and treated as follows: control group (X-IM): 1mg kg(-1) of xylazine given intramuscularly (IM); pharmacopuncture group (X-Yintang): 0.1mg kg(-1) of xylazine diluted to 0.5 mL of saline injected into the Yin Tang acupoint. Heart rate, cardiac rhythm (ECG), systolic arterial blood pressure (SABP), respiratory rate (RR), rectal temperature (RT), blood glucose concentration, degree of sedation and adverse effects were evaluated.RESULTS: Sedative effect was observed in both groups. The degree of sedation was greater in X-IM only at 15 min when compared with X-Yintang group. Cardiovascular established was observed in X-Yintang group, while marked reduction in the HR and increased incidence of ECG abnormalities were detected in X-IM. In both treatment groups, minimal changes were observed in relation to SABP, RR, RT and blood glucose. High incidence (66%) of vomiting was observed in X-IM, while this adverse effect was absent in X-Yintang.CONCLUSION: Pharmacopuncture with xylazine induced clinically relevant sedative effects in dogs, with the advantage of reduction of undesirable side effects associated with alpha(2)-agonists, including bradycardia, cardiac arrhythmias, and emesis.

Influence of Adhesive Restorations on Diffusion of H2O2 Released from a Bleaching Agent and Its Toxic Effects on Pulp Cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Delayed reproductive development in pubertal male rats exposed to the hypolipemiant agent rosuvastatin since prepuberty

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)