Results of the Austrian-Ceylonese hydrobiological mission 1970 of the 1st Zoological Institute of the University of Vienna (Austria) and the Department of Zoology of the Vidyalankara University of Ceylon, Kelaniya. Pt. 5. Decapoda Caridea

The first comprehensive study on the freshwater Caridea of Sri Lanka was by Arudpragrasm and Costa in 1961. Although it was the intention of these authors to continue this study no opportunity was available to them. The present faunal survey however has afforded the present writer to make a detailed study of the distribution of these shrimps especially in the mountain streams of the south-west of Sri Lanka. Two species and two sub-species of Caridina, one species of Atya and four species of Macrobrachium were collected by the hydrobiological mission from the hill streams of Sri Lanka.

Rotifera from Sri Lanka (Ceylon) 2. Further studies on the Eurotatoria including new records

In the first paper of this series, Chengalath and Fernando (1973) dealt with the genus Lecane from Sri Lanka. In all, twenty five species were recorded, of which seventeen species were new records. Two new species were also described. On the present paper the authors deal with the rest of the Eurotatoria. Again they have found many new records. In all 79 species are described in the present paper of which 47 are new records. The present study is based on the examination of over 300 samples from 135 localities including large and small tanks, ponds of various sizes, rice fields, streams and marshes. The collections cover the whole area of Sri Lanka and were taken during different seasons of the year mainly from 1968-1972.

Results of the Austrian-Ceylonese hydrobiological mission 1970 of the 1st Zoological Institute of the University of Vienna (Austria) and the Department of Zoology of the Vidyalankara University of Ceylon, Kelaniya. Pt. 10. Freshwater triclads (Turbellaria, Tricladida) from Ceylon

The collection of Triclads from the Austrian-Ceylonese hydrobiological mission originates from 23 streams in the mountains of the south of Sri Lanka. All collected animals are of the Dugesia gonocephala (Dug.) type. Unfortunately the determinable mature animals were very rare in the samples but it seems certain that all the Triclads, found by the mission, belong to Dugesia nannophallus, described by Ball in 1970 after two individuals from Dunhinda, Badulla (Prov. Uva, Sri Lanka).

National Agricultural Research Organisation. Fisheries Resources Research Institute Annual Report 2002/2003

One of the avenues through which the Government objective of poverty eradication in Uganda can be achieved is Fisheries development and management. Up to 20% of Uganda’s surface area is covered by aquatic systems i.e. lakes, rivers, streams and swamps and to a large extent, all these are interconnected. The large lakes: Victoria, Albert, Kyoga, George and Edward are sites of the more important commercial fisheries, but even the smaller water bodies, rivers (e.g. the Rivers Nile and Kagera) and the surrounding swamps provide sources of livelihood to rural areas. Fish is an important source of high quality food, employment revenue and is currently the second most important export commodity next to coffee generating approximately US $ 80 million annually. Fish exports to regional markets are worth at least US $ 20 million annually. Fish flesh is rich in proteins, which are superior to those of beef and poultry. Fish flesh contains an anticholesterol which assists in reducing heart diseases. Some fishes are of medicinal value e.g. haplochromines (Nkejje) are used to treat measles. Most of the fish in Uganda is got from lakes Victoria, Kyoga, Albert and Albert Nile, Edward and George production systems as well as from the 160 minor lakes and rivers and the associated wetland systems. Capture fisheries based in these systems contribute up to 99% of the fish production in Uganda but aquaculture is also picking up. The fishing industry employs up to one million Ugandans

Selected trace metal concentration in bottom water and sediments of Kyoga basin lakes, and its potential to aquatic pollution

Although other research studies on areas such as the physical-chemical, nutrients and phytoplankton status of Lake Kyoga systems have been given a lot of attention (e.g. Mungoma 1988 and NaFIRRI 2006), efforts to determine the pollution status of this system, especially by heavy metals as one of the worldwide emerging environmental problems, is still limited. Many trace metals are regarded as serious pollutants of aquatic ecosystems because of their persistence, toxicity and ability to be incorporated into food chains (Mwamburi J., and Nathan O.F., 1997). Given the rapid human population growth and the associated economic activities both within the rural and urban areas in Uganda, such fish production systems are becoming very prone to various kinds of pollution including that by heavy metals. Anthropogenic factors such deforestation, use of chemicals and dumping of metallic products, spillages of fuels from outboard engines and many others and or natural processes involving atmospheric deposition by wind or rain, surface run-offs and streams flows from the catchment introduces heavy metals into the lake environment,.

The changing face and role of CACSD

Computer Aided Control Engineering involves three parallel streams: Simulation and modelling, Control system design (off-line), and Controller implementation. In industry the bottleneck problem has always been modelling, and this remains the case - that is where control (and other) engineers put most of their technical effort. Although great advances in software tools have been made, the cost of modelling remains very high - too high for some sectors. Object-oriented modelling, enabling truly re-usable models, seems to be the key enabling technology here. Software tools to support control systems design have two aspects to them: aiding and managing the work-flow in particular projects (whether of a single engineer or of a team), and provision of numerical algorithms to support control-theoretic and systems-theoretic analysis and design. The numerical problems associated with linear systems have been largely overcome, so that most problems can be tackled routinely without difficulty - though problems remain with (some) systems of extremely large dimensions. Recent emphasis on control of hybrid and/or constrained systems is leading to the emerging importance of geometric algorithms (ellipsoidal approximation, polytope projection, etc). Constantly increasing computational power is leading to renewed interest in design by optimisation, an example of which is MPC. The explosion of embedded control systems has highlighted the importance of autocode generation, directly from modelling/simulation products to target processors. This is the 'new kid on the block', and again much of the focus of commercial tools is on this part of the control engineer's job. Here the control engineer can no longer ignore computer science (at least, for the time being). © 2006 IEEE.

The changing face and role of CACSD

Computer Aided Control Engineering involves three parallel streams: Simulation and modelling, Control system design (off-line), and Controller implementation. In industry the bottleneck problem has always been modelling, and this remains the case - that is where control (and other) engineers put most of their technical effort. Although great advances in software tools have been made, the cost of modelling remains very high - too high for some sectors. Object-oriented modelling, enabling truly re-usable models, seems to be the key enabling technology here. Software tools to support control systems design have two aspects to them: aiding and managing the work-flow in particular projects (whether of a single engineer or of a team), and provision of numerical algorithms to support control-theoretic and systems-theoretic analysis and design. The numerical problems associated with linear systems have been largely overcome, so that most problems can be tackled routinely without difficulty - though problems remain with (some) systems of extremely large dimensions. Recent emphasis on control of hybrid and/or constrained systems is leading to the emerging importance of geometric algorithms (ellipsoidal approximation, polytope projection, etc). Constantly increasing computational power is leading to renewed interest in design by optimisation, an example of which is MPC. The explosion of embedded control systems has highlighted the importance of autocode generation, directly from modelling/simulation products to target processors. This is the 'new kid on the block', and again much of the focus of commercial tools is on this part of the control engineer's job. Here the control engineer can no longer ignore computer science (at least, for the time being). ©2006 IEEE.

Value roadmapping: A structured approach for early stage technology investment decisions

Deciding to invest in early stage technologies is one of the most important tasks of technology management and arguably also the most uncertain. It assumes a particular significance in the rise of technology companies in emerging economies, which have to make appropriate investment decisions. Technology managers already have a wide range of methods and tools at their disposal, but these are mostly focussed on quantitative measures such as discounted cash flow and real options techniques. However, in the early stages of technology development there seems to be a lot of dissatisfaction with these techniques as there appears to be a lack of accuracy with respect to the underlying assumptions that these models require. In order to complement these models this paper will discuss an alternative approach that we call value road-mapping. By adapting roadmapping techniques the potential value streams of early stages technologies can be plotted and hence a clearer consensus based picture of the future potential of new technologies emerges. Roadmapping is a workshop-based process bringing together multifunctional perspectives, and supporting communication in particular between technical and commercial groups. The study is work in progress and is based on a growing number of cases. (c) 2006 PICMET.

Supersonic laser deposition of Ti and Ti64 alloys

The importance of metal coating technologies drives the continuous improvement of metal deposition techniques for application in a wide range of industrial sectors. This work presents the foundations of a new process technology for the deposition of Ti and Ti64 coatings on various substrates using supersonic powder streams and impact site laser heating. Full density metallic deposits are obtained under appropriate impact conditions without the need for transiting the melting point of the deposited material or substrate leading to large energy savings. Details of the experimental approach will be presented along with the general characteristics of the titanium coatings produced using this novel coatings method.

High speed titanium coatings by supersonic laser deposition

The importance of metal coating technologies drives the continuous improvement of metal deposition techniques for application in a wide range of industrial sectors. This work presents the foundations of a new process technology for the deposition of titanium coatings on steel tube substrates using supersonic powder streams and impact site laser heating, known as Supersonic Laser Deposition (SLD). Metallic deposits are obtained under appropriate impact conditions without the need for exceeding the melting point of the deposited material or substrate leading to improved coating quality. Details of the experimental approach are presented along with the general characteristics of the titanium coating produced using this novel coatings method. © 2011 Elsevier B.V. All rights reserved.

Policy entrepreneurship in the development of public sector strategy: the case of London health reform

The development of health policy is recognized as complex; however, there has been little development of the role of agency in this process. Kingdon developed the concept of policy entrepreneur (PE) within his ‘windows’ model. He argued inter-related ‘policy streams' must coincide for important issues to become addressed. The conjoining of these streams may be aided by a policy entrepreneur. We contribute by clarifying the role of the policy entrepreneur and highlighting the translational processes of key actors in creating and aligning policy windows. We analyse the work in London of Professor Sir Ara Darzi as a policy entrepreneur. An important aspect of Darzi's approach was to align a number of important institutional networks to conjoin related problems. Our findings highlight how a policy entrepreneur not only opens policy windows but also yokes together a network to make policy agendas happen. Our contribution reveals the role of clinical leadership in health reform.

Molecular phylogeography and population structure of a mid-elevation montane frog Leptobrachium ailaonicum in a fragmented habitat of southwest China

Leptobrachium ailaonicum is a vulnerable anuran restricted to a patchy distribution associated with small mountain streams surrounded by forested slopes at mid-elevations (approximately 2000-2600 m) in the subtropical Mount Wuliang and Mount Ailao ranges in southwest China (Yunnan Province) and northern Vietnam. Given high habitat specificity and lack of suitable habitat in lower elevations between these ranges, we hypothesized limited gene flow between populations throughout its range. We used two mitochondrial genes to construct a phylogeographic pattern within this species in order to test our hypothesis. We also examined whether this phylogeographic pattern is a response to past geological events and/or climatic oscillations. A total of 1989 base pairs were obtained from 81 individuals of nine populations yielding 51 unique haplotypes. Both Bayesian and maximum parsimony phylogenetic analyses revealed four deeply divergent and reciprocally monophyletic mtDNA lineages that approximately correspond to four geographical regions separated by deep river valleys. These results suggest a long history of allopatric separation by vicariance. The distinct geographic distributions of four major clades and the estimated divergence time suggest spatial and temporal separations that coincide with climatic and paleogeographic changes following the orogeny and uplift of Mount Ailao during the late Miocene to mid Pliocene in southwest China. At the southern distribution, the presence of two sympatric yet differentiated clades in two areas are interpreted as a result of secondary contact between previously allopatric populations during cooler Pleistocene glacial cycles. Analysis of molecular variance indicates that most of the observed genetic variation occurs among the four regions implying long-term interruption of maternal gene flow, suggesting that L ailaonicum may represent more than one distinct species and should at least be separated into four management units corresponding to these four geographic lineages for conservation. (C) 2009 Elsevier Inc. All rights reserved.

Cestodes in fish from a pond at Ile-Ife, Nigeria

The Farm Pond, University of Ife, was impounded by the construction of a dam, below the confluence of two small streams, between March and July, 1967. The pond is located at an altitude of 122.4 m. 0.D., its outline is an indented trapezium occupying 445 dkrn' at maximum fill. Natural food is fed into the pond by its two inlets, and the pond is often coloured a darkish brown due to the abundance of plankton. In 1969, on the recommendation by the Fishery Division, Ministry of Agriculture and Natural Resources, Ibadan, about four standard head-pans of poultry droppings per 40 dkm2 per month were spread uniformly over the pond during 1969 and 1970. Also four pounds of triple superphosphate per acre per month were spread for a period of six months. The pond was drained a number of times in 1970. However, the lowest average level of 1.37 m was recorded in April, 1970, before drainage began; and the maximum depth of 5.7 m was recorded in September and October, 1970.

Observations on the biology of Nothobranchius guentheri (Pfeffer) (Cyprinodontidae), an annual fish from the coastal region of East Africa

Nothobranchius guntheri is found in seasonal pools and streams in the coastal region of Tanzania. A population recurring annually in a pond near Kilosa has been studied. Growth in length was rapid and maximum mean lengths were attained within 11-12 and 7-8 weeks of hatching by males and females respectively. Males grew larger and exhibited wider variation in length than females. N. guentheri shows clear sexual dichromatism. No significant inequality in the sex ratio was found. Females with ripe eggs were found 7-8 weeks after hatching. Spawning continued throughout adult life and fecundity increased markedly with increasing length. In laboratory aquaria, aggressiveness between adult males was noted and females were actively driven on to the substratum preparatory to spawning. The diet of the fish pond consisted chiefly of aquatic and terrestrial insects, of which midge larvae and pupae were the most common. N. guentheri is exploited by man in the aquarist trade and for the biological control of mosquitoes. An extended redescription of the species is appended which includes N. melanospilus (Pfeffer) as a synonym.

Deliberation in the motor system: reflex gains track evolving evidence leading to a decision.

Both decision making and sensorimotor control require real-time processing of noisy information streams. Historically these processes were thought to operate sequentially: cognitive processing leads to a decision, and the outcome is passed to the motor system to be converted into action. Recently, it has been suggested that the decision process may provide a continuous flow of information to the motor system, allowing it to prepare in a graded fashion for the probable outcome. Such continuous flow is supported by electrophysiology in nonhuman primates. Here we provide direct evidence for the continuous flow of an evolving decision variable to the motor system in humans. Subjects viewed a dynamic random dot display and were asked to indicate their decision about direction by moving a handle to one of two targets. We probed the state of the motor system by perturbing the arm at random times during decision formation. Reflex gains were modulated by the strength and duration of motion, reflecting the accumulated evidence in support of the evolving decision. The magnitude and variance of these gains tracked a decision variable that explained the subject's decision accuracy. The findings support a continuous process linking the evolving computations associated with decision making and sensorimotor control.