A Real-Time Sliding Mode Control for a Wind Energy System Based on a Doubly Fed Induction Generator

In this paper, a real time sliding mode control scheme for a variable speed wind turbine that incorporates a doubly feed induction generator is described. In this design, the so-called vector control theory is applied, in order to simplify the system electrical equations. The proposed control scheme involves a low computational cost and therefore can be implemented in real-time applications using a low cost Digital Signal Processor (DSP). The stability analysis of the proposed sliding mode controller under disturbances and parameter uncertainties is provided using the Lyapunov stability theory. A new experimental platform has been designed and constructed in order to analyze the real-time performance of the proposed controller in a real system. Finally, the experimental validation carried out in the experimental platform shows; on the one hand that the proposed controller provides high-performance dynamic characteristics, and on the other hand that this scheme is robust with respect to the uncertainties that usually appear in the real systems.

A Novel Micro- and Nano-Scale Positioning Sensor Based on Radio Frequency Resonant Cavities

In many micro- and nano-scale technological applications high sensitivity displacement sensors are needed, especially in ultraprecision metrology and manufacturing. In this work a new way of sensing displacement based on radio frequency resonant cavities is presented and experimentally demonstrated using a first laboratory prototype. The principle of operation of the new transducer is summarized and tested. Furthermore, an electronic interface that can be used together with the displacement transducer is designed and proved. It has been experimentally demonstrated that very high and linear sensitivity characteristic curves, in the range of some kHz/nm; are easily obtainable using this kind of transducer when it is combined with a laboratory network analyzer. In order to replace a network analyzer and provide a more affordable, self-contained, compact solution, an electronic interface has been designed, preserving as much as possible the excellent performance of the transducer, and turning it into a true standalone positioning sensor. The results obtained using the transducer together with a first prototype of the electronic interface built with cheap discrete elements show that positioning accuracies in the micrometer range are obtainable using this cost-effective solution. Better accuracies would also be attainable but using more involved and costly electronics interfaces.

Image-Based Delineation and Classification of Built Heritage Masonry

Fundacion Zain is developing new built heritage assessment protocols. The goal is to objectivize and standardize the analysis and decision process that leads to determining the degree of protection of built heritage in the Basque Country. The ultimate step in this objectivization and standardization effort will be the development of an information and communication technology (ICT) tool for the assessment of built heritage. This paper presents the ground work carried out to make this tool possible: the automatic, image-based delineation of stone masonry. This is a necessary first step in the development of the tool, as the built heritage that will be assessed consists of stone masonry construction, and many of the features analyzed can be characterized according to the geometry and arrangement of the stones. Much of the assessment is carried out through visual inspection. Thus, this process will be automated by applying image processing on digital images of the elements under inspection. The principal contribution of this paper is the automatic delineation the framework proposed. The other contribution is the performance evaluation of this delineation as the input to a classifier for a geometrically characterized feature of a built heritage object. The element chosen to perform this evaluation is the stone arrangement of masonry walls. The validity of the proposed framework is assessed on real images of masonry walls.

Dietary Phytase: an ideal approach for a cost effective and low-polluting aquafeed

Global fishmeal production from wild-catch sources cannot continue to increase indefinitely; suitable alternatives have to be found for sustainable aquaculture. Plant-based aquafeed seems to be the ideal alternative to this, but has its own limitations. Plant ingredients are rich in phytic acid, which reduces the bioavailability of nutrients like minerals and protein to the fish, thereby causing aquaculture pollution. Dietary phytase treatment reduces the aquaculture pollution by improving the bioavailability of nutrients, and reduces the feed cost as evident from poultry and piggery. Phytase activity is highly dependent upon the pH of the gut. Unlike mammals, fish are either gastric or agastric, and hence, the action of dietary phytase varies from species to species. In this article, the authors attempt to summarise various effects of phytase on nutrient utilization, growth of fish and aquatic pollution.

Pen fish culture in reservoirs: an alternative to land based nurseries

An experiment to rear carp seed was conducted in Tamil Nadu, India during October 2001 to April 2002 as a part of an ambitious programme aimed at standardization of pen fish rearing technology for production of stocking material of desired size at a lower cost. The experiment used six pens erected using locally available materials in the exposed marginal area of an existing reservoir. The high survival rate of carps (67.2-94.7%) and reasonable returns on investment (26.2%) obtained in the experiment indicated that fish seed rearing in pens erected in suitable areas of existing reservoirs could serve as a cheaper alternative to the expensive land-based nursery ponds.

Management of waterlogged areas, island and coastal saline soils using fish based mixed farming system

Problems in India regarding the management of various coastal saline soil and waterlogged environments are discussed in detail, considering in particular the potential application of mixed fish farming systems. Various operational and cost requirements of such systems are examined.

Evaluation of two-phase induction motor drives for low-cost applications

An experimental evaluation of small two-phase induction motor drives operating with different inverter topologies is described. Results show that a PWM-based four-switch inverter, having only low-side switches is attractive for high-speed low-cost applications where speeds greater than those that can be obtained using single phase induction motors are required.

Using Discrete Event Simulation (DES) to manage theatre operations in healthcare: An audit-based case study

This paper discusses the application of Discrete Event Simulation (DES) in modelling the complex relationship between patient types, case-mix and operating theatre allocation in a large National Health Service (NHS) Trust in London. The simulation model that was constructed described the main features of nine theatres, focusing on operational processes and patient throughput times. The model was used to test three scenarios of case-mix and to demonstrate the potential of using simulation modelling as a cost effective method for understanding the issues of healthcare operations management and the role of simulation techniques in problem solving. The results indicated that removing all day cases will reduce patient throughput by 23.3% and the utilization of the orthopaedic theatre in particular by 6.5%. This represents a case example of how DES can be used by healthcare managers to inform decision making. © 2008 IEEE.

Carbon nanotube based photocathodes for high frequency amplifiers

The combination of high frequency, high power, high efficiency capabilities is a feature of vacuum tube technology. For most of applications, large bandwidths are required, and therefore the modulation method should also allow large bandwidth operation. Optically modulated cold cathodes, avoiding the use of resonant cavities, should satisfy this requirement. This is the reason why we have developed carbon nanotube based photocathode.© 2009 IEEE.

ZnO thin film surface acoustic wave based lab-on-a-chip

Lab-on-a-chip (LOC) is one of the most important microsystem applications with promise for use in microanalysis, drug development, diagnosis of illness and diseases etc. LOC typically consists of two main components: microfluidics and sensors. Integration of microfluidics and sensors on a single chip can greatly enhance the efficiency of biochemical reactions and the sensitivity of detection, increase the reaction/detection speed, and reduce the potential cross-contamination, fabrication time and cost etc. However, the mechanisms generally used for microfluidics and sensors are different, making the integration of the two main components complicated and increases the cost of the systems. A lab-on-a-chip system based on a single surface acoustic wave (SAW) actuation mechanism is proposed. SAW devices were fabricated on nanocrystalline ZnO thin films deposited on Si substrates using sputtering. Coupling of acoustic waves into a liquid induces acoustic streaming and motion of droplets. A streaming velocity up to ∼ 5cm/s and droplet pumping speeds of ∼lcm/s were obtained. It was also found that a higher order mode wave, the Sezawa wave is more effective in streaming and transportation of microdroplets. The ZnO SAW sensor has been used for prostate antigen/antibody biorecognition systems, demonstrated the feasibility of using a single actuation mechanism for lab-on-a-chip applications. © 2010 Materials Research Society.

SBLOCK: A framework for efficient stencil-based PDE solvers on multi-core platforms

We present a new software framework for the implementation of applications that use stencil computations on block-structured grids to solve partial differential equations. A key feature of the framework is the extensive use of automatic source code generation which is used to achieve high performance on a range of leading multi-core processors. Results are presented for a simple model stencil running on Intel and AMD CPUs as well as the NVIDIA GT200 GPU. The generality of the framework is demonstrated through the implementation of a complete application consisting of many different stencil computations, taken from the field of computational fluid dynamics. © 2010 IEEE.

Effective handling of dialogue state in the hidden information state POMDP-based dialogue manager

Effective dialogue management is critically dependent on the information that is encoded in the dialogue state. In order to deploy reinforcement learning for policy optimization, dialogue must be modeled as a Markov Decision Process. This requires that the dialogue statemust encode all relevent information obtained during the dialogue prior to that state. This can be achieved by combining the user goal, the dialogue history, and the last user action to form the dialogue state. In addition, to gain robustness to input errors, dialogue must be modeled as a Partially Observable Markov Decision Process (POMDP) and hence, a distribution over all possible states must be maintained at every dialogue turn. This poses a potential computational limitation since there can be a very large number of dialogue states. The Hidden Information State model provides a principled way of ensuring tractability in a POMDP-based dialogue model. The key feature of this model is the grouping of user goals into partitions that are dynamically built during the dialogue. In this article, we extend this model further to incorporate the notion of complements. This allows for a more complex user goal to be represented, and it enables an effective pruning technique to be implemented that preserves the overall system performance within a limited computational resource more effectively than existing approaches. © 2011 ACM.

Economic analysis of carp based culture technologies in selected areas of Bangladesh

Six carp based culture technologies such as, carp-pangas, carp polyculture, carp-golda, pangas monoculture, golda monoculture and nursery have been selected to determine the cost and returns of respective technologies in Bangladesh. The sample farmers selected for these technologies were 55, 100, 65, 50, 51 and 55 respectively and thus the total sample size stood at 376. The study covered 7 districts of Bangladesh, namely, Mymensingh, Bogra, Noakhali, Comilla, Jessore, Khulna and Bagerhat. Both primary and secondary data were used for this study. It was found that farmers used a good number of feeds for the selected technologies and they maintained no standard doses for them. Remarkable differences were found among the prices of different feeds and other inputs used for different technologies in different locations. Prices of all inputs were found to be increasing and this increase was more in recent years compared to previous years. Though all the technologies were found to be profitable, the feed situation was not satisfactory. Except rice polish all the local feeds showed deficit in supply to meet the national demand for the country. If this situation persists and no proper measures are taken to secure the local feed supply, the present development of supplementary feed-based aquaculture would be fully dependent on imported feeds and would not be sustainable in future. This study strongly suggests the corresponding authority to handle the matter with proper attention considering its significant livelihood impact on the economy of the country.

HACCP based management system for improving quality of freshwater giant prawn, Macrobrachium rosenbergii

The study was conducted on the present status of HACCP based quality management system of golda, Macrobrachium rosenbergii farms in Fulpur region of Mymensingh. Information was collected on general condition of farms, culture systems and post-harvest quality management. In almost all farms, there is no or inadequate infrastructure facilities such as, road access, electric supply, telecommunications, ice, feed storage facility, vehicle for golda transportation, washing and toilet facilities. The problems associated with sanitation and hygiene was: widespread use of cow dung, poultry manure and construction of open toilet within the vicinity of prawn culture pond. Different grades of commercially available and locally prepared feeds were used for golda culture in the pond. Golda post-larvae (PL) of 40-50 days old were stocked with carp species. The price of golda PL ranged from Tk. 1.00 to Tk. 1.25/piece. The pond size varied from 50 decimal (0.2 ha) to 2.5 acre (1.0 ha) with an average depth of 2-2.5 m. The culture period of golda varied from April-May to November-December and survival rate ranged between 75 and 80%. Production of golda varied from 250-500 kg/acre (625-1,250 kg/ha). Harvested golda were transported to city market within 4 h. Two size grading were generally followed during pricing, e.g. Tk. 500 to 550/kg for >100 g size and Tk. 300/kg for <100 g size. The cost-benefit ratio was found to remain around 1:1.25 depending on availability of PL. Water quality parameters such as, water temperature, pH, dissolved oxygen, total alkalinity and chlorophyll a in five golda farms in Fulpur region were monitored. Water temperature ranged from 29°C to 33°C, dissolved oxygen from 2.28 to 4.13 mg/l, pH between 6.65 and 7.94, alkalinity from 44 to 70 mg/l and chlorophyll a concentration from 61.88 to 102.34 µg/l in the five investigated ponds. The Aerobic Plate Count (APC) of the water sample was within the range of 2.0x10^6 - 2.96x10^7 CFU/ml and of soil samples within the range of 6.9x10^6 - 7.73x10^6 CFU/g. Streptococcus sp., Bacillus sp., Escherichia coli, Staphylococcus sp., Pseudomonas sp. and Salmonella sp. were isolated from pond water and sediment. Different feed samples used for golda was analyzed for proximate composition. Moisture content ranged around 14.14-21.22%, crude protein 20.55-44.1%, lipid 4.67-12.54% and ash 9.7-27.69%. The TVB-N values and peroxide values of feeds used as starter, grower and fish meal were found within the acceptable ranges and samples were free from pathogenic organisms. A training was organized for the golda farmers on HACCP, water quality and post-harvest quality management of prawn.

Effect of low cost feed on the production of walking catfish, Clarias batrachus in farmer's ponds

A feeding trial was conducted for six months in farmer's ponds to assess the performance of BFRI formulated catfish feed on the growth and survival of Clarias batrachus (L.). Nine interested farmers and their ponds (size range: 10-15 dec) in the Barera union of Mymensingh Sadar were selected. The ponds were divided into 3 treatments each with 3 replications. Among the three treatment diets, two diets - traditional (F1) and BFRI formulated (F3) were prepared by using low cost agro-based locally available ingredients and the commercial diets was Saudi-Bangla Grower-1 (F2). The diets were designed as F1, F2 and F3 for traditional (20.40% protein), Commercial (31% protein) and BFRI formulated (30.44% protein) diets respectively. The fingerlings of catfish (7.3 g) were collected from local fish vendors and stocked at the rate of 100/dec. Feeding rates were adjusted by weight after fortnightly sampling of fish. Feeding rate were 10 and 8% of the total body weight respectively for 1st, 2nd month and 5% for the rest of the experimental period. The range of some selected water quality parameters were as follows: dissolved oxygen 4.0 - 7.4 mg/l, temperature 24.0°- 33.9°C, pH 6.8 - 8.00, and transparency 17.0 - 32.00 cm. Which showed suitability of the ponds for rearing fish. At the end of the experiment, significantly highest gain (p<0.05) in weight (1210.96% ±87) and lowest gain in weight (865.25% ±90) were observed in the group of fish fed on diets F3 and F1 respectively. However, no significant differences in growth (p>0.05) was observed in fish fed on commercial diet (F2) and BFRI formulated diet (F3). The FCR value ranged between 2.00 and 2.80 with the traditional diet (F1) showing significantly lower FCR. The total production of fish ranged between 1398.08 and 2145.34 kg/ha with F3 diet resulting in the highest production and net profit. A simple economic analysis showed that fish fed with BFRI formulated (F3) diet resulted in the highest net profit in farmer's pond.