Elements of Europe's energy union. Bruegel Policy Brief 2014/05, September 2014

THE ISSUE European Union energy policy is guided by three objectives: sustainability, security of supply and competitiveness. To meet its goals in these areas, the EU is updating its energy strategy with new targets for 2030. The starting point for this is the assessment of the previous EU climate and energy package, at the centre of which were the 20-20-20 targets for 2020. Although the EU is largely on track to meet these targets, EU energy policy is generally not perceived as a success. Recent events have undermined some of the assumptions on which the 2020 package was built, and the policies for achieving the 2020 targets – although at first sight effective – are far from efficient.

Between energy security and energy market integration. Guidelines for the future development of the EU’s external energy policy in Europe’s neighbourhood. OSW Report, June 2011

For many years the European Union has been improving the efficient use of energy resources and yet the demand for energy in the EU continues to increase. When Europe belonged to one of the world’s key energy markets with relatively easy access to energy resources, growing energy needs were not seen as a source of concern. Today, however, as the competition for energy resources is intensifying and the global position of the EU energy market is being challenged by growing economies in the developing countries, above all China and India, the EU needs to adopt bold policies to guarantee the sustainable supply of energy. This report argues the EU needs to develop a fully-fledged external energy policy; i.e. a common, coherent, strategic approach that build bridges between the interests and needs of the EU integrated energy market on the one hand and supplier countries on the other. The EU’s external energy policy has two main objectives. The first one is to ensure a sustainable, stable and cost-effective energy supply. The second is to promote energy market integration and regulatory convergence with neighbouring countries (often but not always this supports the achievement of the first objective). However, in order to improve its effectiveness, the EU’s external energy policy needs to be seen in a broader economic and political context. Any progress in energy cooperation with third countries is contingent upon the EU’s general stance and offer to those countries.

Energy efficiency: the ever neglected priority of the European energy strategy. Egmont Paper No. 66, June 2014

Summary. Energy saving has been a stated policy objective of the EU since the 1970s. Presently, the 2020 target is a 20% reduction of EU energy consumption in comparison with current projections for 2020. This is one of the headline targets of the European Energy Strategy 2020 but efforts to achieve it remain slow and insufficient. The aim of this paper is to understand why this is happening. Firstly, this paper examines the reasons why public measures promoting energy efficiency are needed and what form these measures should optimally take (§ 1). Fortunately, over the last 20 years, much research has been done into the famous ‘energy efficiency gap’ (or ‘the energy efficiency paradox’), even if more remains to be done. Multiple explanations have been given: market failures, modelling flaws and behavioural obstacles. Each encompasses many complex aspects. Several types of instruments can be adopted to encourage energy efficiency: measures guaranteeing the correct pricing of energy are preferred, followed by taxes or tradable white certificates which in turn are preferred to standards or subsidies. Information programmes are also necessary. Secondly, the paper analyzes the evolution of the different programmes from 2000 onwards (§ 2). This reveals the extreme complexity of the subject. It deals with quite diverse topics: buildings, appliances, public sector, industry and transport. The market for energy efficiency is as diffuse as energy consumption patterns themselves. It is composed of many market actors who demand more efficient provision of energy services, and that suppliers of the necessary goods and know-how deliver this greater efficiency. Consumers in this market include individuals, businesses and governments, and market activities cover all energy-consuming sectors of the economy. Additionally, energy efficiency is the perfect example of a shared competence between the EU and the Member States. Lastly, the legal framework has steadily increased in complexity, and despite the successive energy efficiency programmes used to build this framework, it has become clear that the gap between the target and the results remains. The paper then examines whether the 2012/27/EU Directive adopted to improve the situation could bring better results. It briefly describes the content of this framework Directive, which accompanies and implements the latest energy efficiency programme (§ 3). Although the Directive is technically complex and maintains nonbinding energy efficiency targets, it certainly represents an improvement in several aspects. However, it is also saddled with a multiplicity of exemption clauses and interpretative documents (with no binding value) which weaken its provisions. Furthermore, alone, it will allow the achievement of only about 17.7% of final energy savings by 2020. The implementation process, which is essential, also remains fairly weak. The paper also gives a glimpse of the various EU instruments for financing energy efficiency projects (§ 4). Though useful, they do not indicate a strong priority. Fourthly, the paper tries to analyze the EU’s limited progress so far and gather a few suggestions for improvement. One thing seems to remain useful: targets which can be defined in various ways (§ 5). Basically, all this indicates that the EU energy efficiency strategy has so far failed to reach its targets, lacks coherence and remains ambiguous. In the new Commission’s proposals of 22 January 2014 – intended to define a new climate/energy package in the period from 2020 to 2030 – the approach to energy efficiency remains unclear. This is regrettable. Energy efficiency is the only instrument which allows the EU to reach simultaneously its three targets: sustainability, competitiveness and security. The final conclusion appears thus paradoxical. On the one hand, all existing studies indicate that the decarbonization of the EU economy will be absolutely impossible without some very serious improvements in energy efficiency. On the other hand, in reality energy efficiency has always been treated as a second zone priority. It is imperative to eliminate this contradiction.

The investigation of energy efficiency measures in the traditional buildings in Oporto World Heritage Site

Background The improvement of energy efficiency in buildings is widely promoted as a measure to mitigate climate change through the reduction of CO2 emissions. Thermal regulations worldwide promote it, for both new and existing buildings. Among the existing stock, traditional and historic buildings pose the additional challenge of heritage conservation. Their energy efficiency upgrade raises the risk of provoking negative impacts on their significance. Aims and Methodology This research used an approach based on impact assessment methodologies, defining an inital baseline scenario for both heritage and energy, from which the appropriate improvement solutions were identified and assessed. The measures were dynamically simulated and the results for energy, CO2, cost and comfort compared with the initial scenario, and then being further assessed for their heritage impact to eventually determine the most feasible solutions. To test this method, ten case studies, representative of the identified typological variants, were selected among Oporto’s traditional buildings located in the World Heritage Site. Findings and Conclusions The fieldwork data revealed that the energy consumption of these dwellings was below the European average. Additionally, the households expressed that their home comfort sensation was overall positive. The simulations showed that the introduction of insulation and solar thermal panels were ineffective on these cases in terms of energy, cost and comfort. At the same time, these measures pose a great risk to the buildings heritage value. The most efficient solutions were obtained from behavioural changes and DHW retrofit. The study reinforced the idea that traditional buildings performed better than expected and can be retrofitted and updated at a low-cost and with passive solutions. The use of insulation and solar panels should be disregarded.

Detection of low energy antimatter with emulsions

Emulsion detectors feature a very high position resolution and consequently represent an ideal device when particle detection is required at the micrometric scale. This is the case of quantum interferometry studies with antimatter, where micrometric fringes have to be measured. In this framework, we designed and realized a new emulsion based detector characterized by a gel enriched in terms of silver bromide crystal contents poured on a glass plate. We tested the sensitivity of such a detector to low energy positrons in the range 10–20 keV . The obtained results prove that nuclear emulsions are highly efficient at detecting positrons at these energies. This achievement paves the way to perform matter-wave interferometry with positrons using this technology.

Resonant excitation energy transfer in [Rh(bpy)3][NaCr(ox)3]ClO4

Resonant fluorescence line narrowing of the R1 line of the [Cr(ox)3]3− chromophore in [Rh(bpy)3][NaCr(ox)3]ClO4 at 1.6 K neither gives rise to the usual three-line pattern nor to spectral diffusion. Instead multi-line spectra with spacings equal to the zero-field splitting of the ground state are observed. This phenomenon is attributed to efficient non-radiative resonant energy transfer within the R1 line.

An efficient numerical method for highly oscillatory ordinary differential equations /

"Supported in part by the Department of Energy under contract ENERGY/EY-76-S-02-2383, and submitted in partial fulfillment of the requirements of the Graduate College for the degree of doctor of philosophy."

Efficient separations and processing integrated program (ESP-IP).

February 1994.

Affordable Energy Plan /

Illinois Lieutenant Governor Patrick Quinn responded to rising concerns about unaffordable energy for low-income Illinois residents by convening a meeting of advocates in January 2003, and challenging them to develop a better approach to energy assistance. As a result of that challenge, a working group of low-income advocates, energy policy advisors, researchers, and community leaders met and established the Illinois Affordable Energy Campaign (IAEC) to identify and recommend policy changes to the current Low Income Home Energy Assistance Program (LIHEAP). The Illinois LIHEAP program gives heating assistance to approximately 316,000 families across the state each year. This document the Affordable Energy Plan, is the result of this collaborative process. While the current LIHEAP program provides valuable and essential assistance to low-income families, the Affordable Energy Plan (AEP) improves the program design through a set of common sense reform measures that better address today's volatile energy environment. Reconstructing LIHEAP will make the program more efficient and effective; it will make energy more affordable for more LIHEAP customers; Illinois will see fewer homes disconnected from their utility services, and participants will be able to better understand and plan for their heating expenses.

Towards Accurate and Efficient Description of Excited States

Thesis (Ph.D.)--University of Washington, 2016-06

Toward efficient multifeature query processing

In many advanced applications, data are described by multiple high-dimensional features. Moreover, different queries may weight these features differently; some may not even specify all the features. In this paper, we propose our solution to support efficient query processing in these applications. We devise a novel representation that compactly captures f features into two components: The first component is a 2D vector that reflects a distance range ( minimum and maximum values) of the f features with respect to a reference point ( the center of the space) in a metric space and the second component is a bit signature, with two bits per dimension, obtained by analyzing each feature's descending energy histogram. This representation enables two levels of filtering: The first component prunes away points that do not share similar distance ranges, while the bit signature filters away points based on the dimensions of the relevant features. Moreover, the representation facilitates the use of a single index structure to further speed up processing. We employ the classical B+-tree for this purpose. We also propose a KNN search algorithm that exploits the access orders of critical dimensions of highly selective features and partial distances to prune the search space more effectively. Our extensive experiments on both real-life and synthetic data sets show that the proposed solution offers significant performance advantages over sequential scan and retrieval methods using single and multiple VA-files.

Highly efficient luminescence from a hybrid state found in strongly quantum confined PbS nanocrystals

We report that high quality PbS nanocrystals, synthesized in the strong quantum confinement regime, have quantum yields as high as 70% at room temperature. We use a combination of modelling and photoluminescence up-conversion to show that we obtain a nearly monodisperse size distribution. Nevertheless, the emission displays a large nonresonant Stokes shift. The magnitude of the Stokes shift is found to be directly proportional to the degree of quantum confinement, from which we establish that the emission results from the recombination of one quantum confined charge carrier with one localized or surface-trapped charge carrier. Furthermore, the surface state energy is found to lie outside the bulk bandgap so that surface-related emission only commences for strongly quantum confined nanocrystals, thus highlighting a regime where improved surface passivation becomes necessary.

Efficient Multi-hop Broadcast Data Dissemination in IoT and Smart Cities

Internet of Things (IoT) can be defined as a “network of networks” composed by billions of uniquely identified physical Smart Objects (SO), organized in an Internet-like structure. Smart Objects can be items equipped with sensors, consumer devices (e.g., smartphones, tablets, or wearable devices), and enterprise assets that are connected both to the Internet and to each others. The birth of the IoT, with its communications paradigms, can be considered as an enabling factor for the creation of the so-called Smart Cities. A Smart City uses Information and Communication Technologies (ICT) to enhance quality, performance and interactivity of urban services, ranging from traffic management and pollution monitoring to government services and energy management. This thesis is focused on multi-hop data dissemination within IoT and Smart Cities scenarios. The proposed multi-hop techniques, mostly based on probabilistic forwarding, have been used for different purposes: from the improvement of the performance of unicast protocols for Wireless Sensor Networks (WSNs) to the efficient data dissemination within Vehicular Ad-hoc NETworks (VANETs).

A rationale for the optimisation by computer methods of the efficient use of metals and materials

The aim of the research project was to gain d complete and accurate accounting of the needs and deficiencies of materials selection and design data, with particular attention given to the feasibility of a computerised materials selection system that would include application analysis, property data and screening techniques. The project also investigates and integrates the three major aspects of materials resources, materials selection and materials recycling. Consideration of the materials resource base suggests that, though our discovery potential has increased, geologic availability is the ultimate determinant and several metals may well become scarce at the same time, thus compounding the problem of substitution. With around 2- to 20- million units of engineering materials data, the use of a computer is the only logical answer for scientific selection of materials. The system developed at Aston is used for data storage, mathematical computation and output. The system enables programs to be run in batch and interactive (on-line) mode. The program with modification can also handle such variables as quantity of mineral resources, energy cost of materials and depletion and utilisation rates of strateqic materials. The work also carries out an in-depth study of copper recycling in the U.K. and concludes that, somewhere in the region of 2 million tonnes of copper is missing from the recycling cycle. It also sets out guidelines on product design and conservation policies from the recyclability point of view.