Effect Of Load Triaxiality On Polymorphic Transitions In Zinc Oxide

Molecular dynamics (MD) simulations and first-principles calculations are carried out to analyze the stability of both newly discovered and previously known phases of ZnO under loading of various triaxialities. The analysis focuses on a graphite-like phase (FIX) and a body-centered-tetragonal phase (BCT-4) that were observed recently in [0 1 (1) over bar 0]- and [0 0 0 1]-oriented nanowires respectively under uniaxial tensile loading as well as the natural state of wurtzite (WZ) and the rocksalt (RS) phase which exists under hydrostatic pressure loading. Equilibrium critical stresses for the transformations are obtained. The WZ -> HX transformation is found to be energetically favorable above a critical tensile stress of 10 GPa in [0 1 (1) over tilde 0] nanowires. The BCT-4 phase can be stabilized at tensile stresses above 7 GPa in [0 0 0 1] nanowires. The RS phase is stable at hydrostatic pressures above 8.2 GPa. The identification and characterization of these phase transformations reveal a more extensive polymorphism of ZnO than previously known. A crystalline structure-load triaxiality map is developed to summarize the new understanding. (c) 2007 Elsevier Ltd. All rights reserved.

Interface Layer Effect On The Stress Distribution Of A Wafer-Bonded Bilayer Structure

The interface layer plays an important role in stress transfer in composite structures. However, many interface layer properties such as the modulus, thickness, and uniformity are difficult to determine. The model developed in this article links the influence of the interface layer on the normal stress distribution along the layer thickness with the layer surface morphology before bonding. By doing so, a new method of determining the interfacial parameter(s) is suggested. The effects of the layer thickness and the surface roughness before bonding on the normal stress distribution and its depth profile are also discussed. For ideal interface case with no interfacial shear stress, the normal stress distribution pattern can only be monotonically decreased from the interface. Due to the presence of interfacial shear stress, the normal stress distribution is much more complex, and varies dramatically with changes in the properties of the interface layer, or the dimensions of the bonding layers. The consequence of this dramatic stress field change, such as the shift of the maximum stress from the interface is also addressed. The size-dependent stress distribution in the thickness direction due to the interface layer effect is presented. When the interfacial shear stress is reduced to zero, the model presented in this article is also demonstrated to have the same normal stress distribution as obtained by the previous model, which does not consider the interface layer effect.

Evaluation of influence of multiple scattering effect in light-scattering-based applications

The extinction cross sections of a system containing two particles are calculated by the T-matrix method, and the results are compared with those of two single particles with single-scattering approximation. The necessity of the correction of the refractive indices of water and polystyrene for different incident wavelengths is particularly addressed in the calculation. By this means, the volume fractions allowed for certain accuracy requirements of single-scattering approximation in the light scattering experiment can be evaluated. The volume fractions calculated with corrected refractive indices are compared with those obtained with fixed refractive indices which have been rather commonly used, showing that fixed refractive indices may cause significant error in evaluating multiple scattering effect. The results also give a simple criterion for selecting the incident wavelength and particle size to avoid the 'blind zone' in the turbidity measurement, where the turbidity change is insensitive to aggregation of two particles.

Effect of Cattail (Typha domingensis) Extracts, Leachates, and Selected Phenolic Compounds on Rates of Oxygen Production by Salvinia (Salvinia minima)

Salvinia (Salvinia minima Willd.) is a water fern found in Florida waters, usually associated with Lemna and other small free-floating species. Due to its buoyancy and mat-forming abilities, it is spread by moving waters. In 1994, salvinia was reported to be present in 247 water bodies in the state (out of 451 surveyed public waters, Schardt 1997). It is a small, rapidly growing species that can become a nuisance due to its explosive growth rates and its ability to shade underwater life (Oliver 1993). Any efforts toward management of salvinia populations must consider that, in reasonable amounts, its presence is desirable since it plays an important role in the overall ecosystem balance. New management alternatives need to be explored besides the conventional herbicide treatments; for example, it has been shown that the growth of S. molesta can be inhibited by extracts of the tropical weed parthenium (Parthenium hysterophorus) and its purified toxin parthenin (Pande 1994, 1996). We believe that cattail, Typha spp. may be a candidate for control of S. minima infestations. Cattail is an aggressive aquatic plant, and has the ability to expand over areas that weren't previously occupied by other species (Gallardo et al. 1998a and references cited there). In South Florida, T. domingensis is a natural component of the Everglades ecosystem, but in many cases it has become the dominant marsh species, outcompeting other native plants. In Florida public waters, this cattail species is the most dominant emergent species of aquatic plants (Schardt 1997). Several factors enable it to accomplish opportunistic expansion, including size, growth habits, adaptability to changes in the surroundings, and the release of compounds that can prevent the growth and development of other species. We have been concerned in the past with the inhibitory effects of the T. domingensis extracts, and the phenolic compounds mentioned before, towards the growth and propagation of S. minima (Gallardo et al. 1998b). This investigation deals with the impact of cattail materials on the rates of oxygen production of salvinia, as determined through a series of Warburg experiments (Martin et al. 1987, Prindle and Martin 1996).

Edge and Size Effects in Micro Composite Structure

Because of the load transfer effect of interface layer, the stress distribution inside the composite structure of film/substrate can be very different from the Timoshenko's model. In this paper, we give the derivation and analysis of such load transfer effect of shear-lag (S-L) model. The micro-structure size (boundary conditions) effect together with interface load transfer effect becomes more and more important as the microstructure size including the three dimensions of thickness, width and length shrinks. The microstructure size is also responsible for the so-called edge-induced stress. The edge effect and difference of S-L model and Timoshenko model are also demonstrated.

Biogeographic analysis of the Tortugas Ecological Reserve: Examining the refuge effect following reserve establishment

Almost 120 days at sea aboard three NOAA research vessels and one fishing vessel over the past three years have supported biogeographic characterization of Tortugas Ecological Reserve (TER). This work initiated measurement of post-implementation effects of TER as a refuge for exploited species. In Tortugas South, seafloor transect surveys were conducted using divers, towed operated vehicles (TOV), remotely operated vehicles (ROV), various sonar platforms, and the Deepworker manned submersible. ARGOS drifter releases, satellite imagery, ichthyoplankton surveys, sea surface temperature, and diver census were combined to elucidate potential dispersal of fish spawning in this environment. Surveys are being compiled into a GIS to allow resource managers to gauge benthic resource status and distribution. Drifter studies have determined that within the ~ 30 days of larval life stage for fishes spawning at Tortugas South, larvae could reach as far downstream as Tampa Bay on the west Florida coast and Cape Canaveral on the east coast. Together with actual fish surveys and water mass delineation, this work demonstrates that the refuge status of this area endows it with tremendous downstream spillover and larval export potential for Florida reef habitats and promotes the maintenance of their fish communities. In Tortugas North, 30 randomly selected, permanent stations were established. Five stations were assigned to each of the following six areas: within Dry Tortugas National Park, falling north of the prevailing currents (Park North); within Dry Tortugas National Park, falling south of the prevailing currents (Park South); within the Ecological Reserve falling north of the prevailing currents (Reserve North); within the Ecological Reserve falling south of the prevailing currents (Reserve South); within areas immediately adjacent to these two strata, falling north of the prevailing currents (Out North); and within areas immediately adjacent to these two strata, falling south of the prevailing currents (Out South). Intensive characterization of these sites was conducted using multiple sonar techniques, TOV, ROV, diver-based digital video collection, diver-based fish census, towed fish capture, sediment particle-size, benthic chlorophyll analyses, and stable isotope analyses of primary producers, fish, and, shellfish. In order to complement and extend information from studies focused on the coral reef, we have targeted the ecotone between the reef and adjacent, non-reef habitats as these areas are well-known in ecology for indicating changes in trophic relationships at the ecosystem scale. Such trophic changes are hypothesized to occur as top-down control of the system grows with protection of piscivorous fishes. Preliminary isotope data, in conjunction with our prior results from the west Florida shelf, suggest that the shallow water benthic habitats surrounding the coral reefs of TER will prove to be the source of a significant amount of the primary production ultimately fueling fish production throughout TER and downstream throughout the range of larval fish dispersal. Therefore, the status and influence of the previously neglected, non-reef habitat within the refuge (comprising ~70% of TER) appears to be intimately tied to the health of the coral reef community proper. These data, collected in a biogeographic context, employing an integrated Before-After Control Impact design at multiple spatial scales, leave us poised to document and quantify the postimplementation effects of TER. Combined with the work at Tortugas South, this project represents a multi-disciplinary effort of sometimes disparate disciplines (fishery oceanography, benthic ecology, food web analysis, remote sensing/geography/landscape ecology, and resource management) and approaches (physical, biological, ecological). We expect the continuation of this effort to yield critical information for the management of TER and the evaluation of protected areas as a refuge for exploited species. (PDF contains 32 pages.)

Changes in the size structure of the yellowfin tuna population of the tropical eastern Pacific Ocean from 1947 to 1955

ENGLISH: Morphometric studies by Godsil (1948), Godsil and Greenhood (1951), Royce (1953) and Schaefer (1952, 1955) have indicated that the yellowfin tuna of the Eastern Pacific are distinct from those of the Central Pacific. Tagging of yellowfin tuna by the California Department of Fish and Game, and by the Inter-American Tropical Tuna Commission in the Eastern Pacific, and by the Pacific Oceanic Fishery Investigations in the Central Pacific, have not yet revealed any migrations between these areas. Shimada and Schaefer (1956) have compared changes in population abundance and fishing intensity, considering the population in the Eastern Pacific as a separate entity. They conclude " ... the amount of fishing has had a real effect upon the stock of Eastern Pacific yellowfin tuna, taken in the aggregate, over the period studied. The evidence suggests also that for this species the intensity of fishing in some recent years has reached and might have even exceeded the level corresponding to the maximum equilibrium yield." Tagging experiments by the California Department of Fish and Game and by the Inter-American Tropical Tuna Commission have yielded returns in the order of one to five percent (Roedel 1954, and unpublished data of both agencies), a level much lower than that at which fishing intensity would be expected to noticeably affect the population size. These results are probably a reflection of the inadequacies of the present tagging methods, but they could lend doubt to the conclusions of Shimada and Schaefer. It is desirable, therefore, to examine other, independent, evidence as to the effects of fishing on the population. At the high levels of fishing intensity suggested by Shimada and Schaefer, in addition to changes in quantity, measurable changes would be expected to have occurred in the quality of the yellowfin tuna stocks, because the average age and size of the fish would have been reduced by the high mortality rates accompanying high fishing intensities. A continuing regular program of sampling catches and determining their length composition, to assess changes in the size composition of the stocks, was initiated by the Commission in 1954 but direct measurements are not available for the earlier, more dynamic period of growth of the fishery. Consequently, other, more general indications of possible changes in the size composition were sought. SPANISH: Los estudios morfométricos efectudos por Godsil (1948), Godsil y Greenhood (1951), Royce (1953) y Schaefer (1952, 1955), han demostrado que el atún aleta amarilla del Pacífico Oriental es distinto del que habita el PacÍfico Central. Los experimentos del Departamento de Pesca y Caza de California y de la Comisión Interamericana del Atún Tropical en el Pacífico Oriental, así como los de las Investigaciones Pesqueras del Océano Pacífico en el Pacífico Central,consistentes en la marcación de atunes aleta amarilla, aún no han puesto de manifiesto movimientos migratorios entre dichas áreas. Shimada y Schaefer (1956) han hecho estudios comparativos sobre la abundancia de la población y la intensidad de la pesca, considerando a la población del Pacífico Oriental como una entidad separada. Su conclusión es que " ... la intensidad de la pesca ha tenido un definido efecto sobre la población del atún aleta amarilla del Pacífico Oriental, tomada en conjunto, a lo largo del período estudiado. La evidencia de que se dispone sugiere así mismo que, por lo que hace a esta especie, la intensidad de la pesca en los últimos años ha alcanzado y quizás aún sobrepasado el nivel correspondiente a la máxima pesca de equilibrio". Los experimentos de mar•cación del Departamento de Pesca y Caza de California y de la Comisión Interamericana del Atún Tropical han producido recuperaciones ,entre el uno y el cinco por ciento (Roedel 1954 y datos inéditos de ambos organismos), lo que constituye un nivel mucho más bajo de aquél en que la intensidad de la pesca podría considerarse que afectaría notablemente el tamaño de la población. Estos resultados reflejan probablemente lo inadecuados que son aún los métodos de marcación, pero ellos podrían, quizá, poner en tela de juicio las conclusiones de Shimada y Schaefer. Por lo tanto,es deseable examinar otras fuentes de evidencia independientes, relacionadas con el efecto que la pesca tiene sobre la población. En efecto, si los altos índices de pesca sugeridos por Shimada y Schaefer son correctos, es de esperar que, además de los cambios en la magnitud de la población, se hayan producido otros, concomitantes y sensibles, en la calidad de los stocks de atún aleta amarilla, puesto que tanto el promedio de edad como el de tamaño de los individuos habrían disminuído debido a las elevadas tasas de mortalidad inherentes a las altas intensidades de pesca. En 1954 la Comisión inició un programa ininterrumpido para tomar muestras y determinar en ellas las frecuencias de tallas y evaluar de este modo los cambios correlativos que tuvieran lugar en los stocks pero, infortunadamente, este sistema de evaluación directa no fué practicado en el período anterior, que fué precisamente el de rápida expansión de la pesquería. En tal virtud, hubo de ser necesario buscar indicios más generales referentes a los cambios posibles en la composición de tamaños. (PDF contains 20 pages.)

Detection of Atomic Scale Changes in the Free Volume Void Size of Three-Dimensional Colorectal Cancer Cell Culture Using Positron Annihilation Lifetime Spectroscopy

5 p.

Size composition, growth and sexual maturity of bigeye tuna, Thunnus obesus (Lowe), from the Japanese long-line fishery in the Eastern Pacific Ocean

Size composition data of bigeye tuna taken from the eastern tropical Pacific Ocean by Japanese Prefectural experimental training vessels from 1958 to 1964 are examined. A gradient of increasing fish size from east to west is noted. Males increase in ratio over females for the entire range of lengths examined, and beyond 170 cm comprise more than 75 per cent of the total. The first semester of the year is important as a bigeye spawning season. A general relationship between sexual maturity and thermal structure of the water is discussed. At the end of their 12th quarter of life bigeye are about 114 cm long, by the 16th quarter, 137 cm and at the end of 20 quarters, about 153 cm. The long-line fishery in the eastern Pacific has had a marked effect on the size composition of the stocks of bigeye, but whether the fishing has driven the stocks below a point which could afford a maximum sustainable yield could not be determined. (PDF contains 55 pages.)

A unified guide to two opposite size effects in nano elastic materials

The microstructural variation near surface of nano elastic materials is analyzed based on different potentials. The atomic/molecular mechanism underlying the variation and its effect on elastic modulus are such that the nature of long-range interactions (attractive or repulsive) in the atomic/molecular potentials essentially governs the variation near surface (looser or tighter) and results in two opposite size effects (decreasing or increasing modulus) with decreasing size.

Effect of fish meal in formulated diet on the growth of Heterotis niloticus in semi-intensive pond culture system

The aim of the investigation is to know the percentage of fish meal required to support the best growth of Heterotis niloticus in a semi intensive pond culture system. To achieve this, feed was formulated with equal percentages of blood meal, and corn meal and varying levels of fish meal. The experiment was in four treatments. Results showed that the mean weight gained was directly proportional to the quantity of fish meal made available to the fish fence 31.58g, 33.79g, 45.15g and 51.24g were recorded for treatments I, II, III and IV respectively. Result from this study when compared with previous works, shows that size of the water body to a greater extent affects the growth. The availability of fish meal in the feed made it more acceptable to the fish and hence a commensurate conversion in to flesh. The analysis of variance showed that there is significant difference in the growth performance in the treatments

The effect of long term exploitation by the gill net fishery on the multispecies fish stocks in Kainji Lake, Nigeria, 1969-1997

The findings are presented of an assessment made of the gillnet fishery in Kainji Lake, Nigeria from 1969 to the present, on the basis of data sets from commercial and experimental gillnet fishing, with the purpose to detect trends in some key fishery monitoring indicators. During this period, there has been an increase in the number of small meshed nets in the fishery resulting in a shift in the mode to lower mesh sizes; consequently, the average mesh size declined gradually in the fishery. This trend is found to be directly correlated with the decline in the CPUE and mean weight of the fish species. It is argued that the observed trend in CPUE and mean weight is forcing the fishermen to switch effort to gears such as traps which have very small meshes and can indescriminately take all sizes of the fish. It is shown that the catch composition by weight of Citharinus citharus, Lates niloticus and tilapias declined in the gillnet fishery in the late 70's and early 80's. Recent data, from 1994 to 1996, however indicates that C. citharus is recovering, but with declining mean weight. This suggests that the exploitation pattern is shifting to the smaller fish through the use of small meshed nets. In general, however, there has not been drastic changes in species bio-diversity in the Lake as a result of predatory effect and ecosystem overfishing as has happened in other great African Lakes. The species composition since lake formation continued to be dominated by fewer that 20 species. The potential yield for the lake has been estimated to be 32,166 tonnes (excluding clupeids) and the required optimum fishing effort to be 1,814 fishing canoes. In view of the relative stability of the species diversity in the lake and the current fish production level, it is proposed here that this MSY be adopted for all species. This would be achieved with the current effort level in the lake assuming that the efficiency of the fishermen and their gears do not improve. It should be reviewed after 10 or more years of catch and effort data collection. (PDF contains 65 pages)

Fluorescence optofluidic microscopy and fluorescence microscopy based on the Talbot effect

Light microscopy has been one of the most common tools in biological research, because of its high resolution and non-invasive nature of the light. Due to its high sensitivity and specificity, fluorescence is one of the most important readout modes of light microscopy. This thesis presents two new fluorescence microscopic imaging techniques: fluorescence optofluidic microscopy and fluorescent Talbot microscopy. The designs of the two systems are fundamentally different from conventional microscopy, which makes compact and portable devices possible. The components of the devices are suitable for mass-production, making the microscopic imaging system more affordable for biological research and clinical diagnostics.

Fluorescence optofluidic microscopy (FOFM) is capable of imaging fluorescent samples in fluid media. The FOFM employs an array of Fresnel zone plates (FZP) to generate an array of focused light spots within a microfluidic channel. As a sample flows through the channel and across the array of focused light spots, a filter-coated CMOS sensor collects the fluorescence emissions. The collected data can then be processed to render a fluorescence microscopic image. The resolution, which is determined by the focused light spot size, is experimentally measured to be 0.65 μm.

Fluorescence Talbot microscopy (FTM) is a fluorescence chip-scale microscopy technique that enables large field-of-view (FOV) and high-resolution imaging. The FTM method utilizes the Talbot effect to project a grid of focused excitation light spots onto the sample. The sample is placed on a filter-coated CMOS sensor chip. The fluorescence emissions associated with each focal spot are collected by the sensor chip and are composed into a sparsely sampled fluorescence image. By raster scanning the Talbot focal spot grid across the sample and collecting a sequence of sparse images, a filled-in high-resolution fluorescence image can be reconstructed. In contrast to a conventional microscope, a collection efficiency, resolution, and FOV are not tied to each other for this technique. The FOV of FTM is directly scalable. Our FTM prototype has demonstrated a resolution of 1.2 μm, and the collection efficiency equivalent to a conventional microscope objective with a 0.70 N.A. The FOV is 3.9 mm × 3.5 mm, which is 100 times larger than that of a 20X/0.40 N.A. conventional microscope objective. Due to its large FOV, high collection efficiency, compactness, and its potential for integration with other on-chip devices, FTM is suitable for diverse applications, such as point-of-care diagnostics, large-scale functional screens, and long-term automated imaging.

Proximity effect in Ag-Pb alloys

The superconducting properties and the microstructure of the Ag_100-xPb_x alloys, 1 ≤ x ≤ 5, prepared by rapid quenching from the liquid state with and without subsequent heat treatments, have been studied. The x-ray diffraction measurements show that supersaturated solid solutions of Pb in Ag can be obtained up to 3.2 at.% Pb as compared to less than 0.1 at.% Pb at equilibrium. It was found that by suitable heat treatment it is possible to vary the size and distribution of the Pb precipitates in the Ag matrix and reproducible superconducting properties in the alloy can be observed. The superconducting transition temperature of these samples can be qualitatively explained by the Silvert and Singh's theoretical calculation. The theory developed for the case of layer structure can be extended to three dimensions to explain the critical current versus temperature behavior. The critical current versus field behavior of these alloys can be explained by the modification of the Josephson effect. Combining these results together with the critical magnetic field measurements and the microstructure studies of the alloys, it can be concluded that the three-dimensional proximity effect is the main mechanism for the superconductivity in the Ag-Pb alloys. Based on the Hilsch empirical formula which was based on experimental results obtained on layer structures, the experimental data in this investigation show that the electron-phonon-electron interaction in silver is attractive. The interaction parameter NV obtained is approximately 0.06, which would lead to a value of 10^-5 °K for the superconducting transition temperature of Ag. These values are in agreement with other determinations which were done on vapor-deposited metallic film sandwiches. Hence, the Hilsch empirical relation valid for layer structures is also valid in the three-dimensional case. Because the transition temperature and the critical current can be varied in a wide range by controlling the heat treatments, the Ag-Pb superconductors might have some useful applications.

Effect of Microstructural Interfaces on the Mechanical Response of Crystalline Metallic Materials

Advances in nano-scale mechanical testing have brought about progress in the understanding of physical phenomena in materials and a measure of control in the fabrication of novel materials. In contrast to bulk materials that display size-invariant mechanical properties, sub-micron metallic samples show a critical dependence on sample size. The strength of nano-scale single crystalline metals is well-described by a power-law function, σαD^-n, where D is a critical sample size and n is a experimentally-fit positive exponent. This relationship is attributed to source-driven plasticity and demonstrates a strengthening as the decreasing sample size begins to limit the size and number of dislocation sources. A full understanding of this size-dependence is complicated by the presence of microstructural features such as interfaces that can compete with the dominant dislocation-based deformation mechanisms. In this thesis, the effects of microstructural features such as grain boundaries and anisotropic crystallinity on nano-scale metals are investigated through uniaxial compression testing. We find that nano-sized Cu covered by a hard coating displays a Bauschinger effect and the emergence of this behavior can be explained through a simple dislocation-based analytic model. Al nano-pillars containing a single vertically-oriented coincident site lattice grain boundary are found to show similar deformation to single-crystalline nano-pillars with slip traces passing through the grain boundary. With increasing tilt angle of the grain boundary from the pillar axis, we observe a transition from dislocation-dominated deformation to grain boundary sliding. Crystallites are observed to shear along the grain boundary and molecular dynamics simulations reveal a mechanism of atomic migration that accommodates boundary sliding. We conclude with an analysis of the effects of inherent crystal anisotropy and alloying on the mechanical behavior of the Mg alloy, AZ31. Through comparison to pure Mg, we show that the size effect dominates the strength of samples below 10 μm, that differences in the size effect between hexagonal slip systems is due to the inherent crystal anisotropy, suggesting that the fundamental mechanism of the size effect in these slip systems is the same.