Regulatory price performance, excess cost indexes and profitability:how effective is price cap regulation in the water industry?

In this study we apply an index number approach to allow for cross sectional comparisons of relative profitability, productivity and price performance of the regulated Water and Sewerage companies (WaSCs) in England and Wales during the years 1991-2008. In order to better analyse the impact of regulation on WaSC performance, we decompose actual economic profits into spatial multilateral Fisher productivity (TFP) index, the inverse of which is demonstrated to be a regulatory excess cost index that measures the deviation of a firm’s actual costs from benchmark costs, and a newly developed regulatory total price performance (TPP) index, which measures the excess of regulated revenues relative to benchmark costs. Increases (decreases) in regulatory price performance are indicative of the loosening (tightening) of price cap regulation. Moreover, we also show that the relationship between actual economic profitability, regulatory excess costs and regulatory price performance indices can be used to categorize regulatory price caps as “weak”, “powerful” or “catch-up promoting”. The results indicated that throughout the entire 1991-2008 period, price caps were never “powerful”, in the sense that they required less productive firms to immediately and fully catch-up to the most productive firm to regain economic profitability. More specifically, during the years 1991-2000 price caps were “weak” as prices were high enough for the firms to achieve economic profits despite their low productivity levels. However, after 2001 prices became “catch up promoting” as they required less productive companies to eliminate at least some excess costs in order to eliminate economic losses. Finally, we emphasize that as our results also clearly demonstrated a much closer alignment between allowed revenues and benchmark costs after 2001, Ofwat’s approach during this period was not only appropriate, but should also be continued in the 2009 price review.

The innovation decision:an economic analysis

Studies of the determinants and effects of innovation commonly make an assumption about the way in which firms make the decision to innovate, but rarely test this assumption. Using a panel of Irish manufacturing firms we test the performance of two alternative models of the innovation decision, and find that a two-stage model (the firm decides whether to innovate, then whether to perform product only, process only or both) outperforms a one-stage, simultaneous model. We also find that external knowledge sourcing affects the innovation decision and the type of innovation undertaken in a way not previously recognised in the literature. © 2007 Elsevier Ltd. All rights reserved.

Technical and economic simulation of biomass pyrolysis processes for fuels and electricity

There is considerable concern over the increased effect of fossil fuel usage on the environment and this concern has resulted in an effort to find alternative, environmentally friendly energy sources. Biomass is an available alternative resource which may be converted by flash pyrolysis to produce a crude liquid product that can be used directly to substitute for conventional fossil fuels or upgraded to a higher quality fuel. Both the crude and upgraded products may be utilised for power generation. A computer program, BLUNT, has been developed to model the flash pyrolysis of biomass with subsequent upgrading, refining or power production. The program assesses and compares the economic and technical opportunities for biomass thermochemical conversion on the same basis. BLUNT works by building up a selected processing route from a number of process steps through which the material passes sequentially. Each process step has a step model that calculates the mass and energy balances, the utilities usage and the capital cost for that step of the process. The results of the step models are combined to determine the performance of the whole conversion route. Sample results from the modelling are presented in this thesis. Due to the large number of possible combinations of feeds, conversion processes, products and sensitivity analyses a complete set of results is impractical to present in a single publication. Variation of the production costs for the available products have been illustrated based on the cost of a wood feedstock. The effect of selected macroeconomic factors on the production costs of bio-diesel and gasoline are also given.

Cost-based pricing in the NHS internal market : accounting choices and the achievement of economic efficiency

Since 1988, quasi-markets have been introduced into many areas of social policy in the UK, the NHS internal market is one example. Markets operate by price signals. The NHS Internal Market, if it is to operate efficiently, requires purchasers and providers to respond to price signals. The research hypothesis is - cost accounting methods can be developed to enable healthcare contracts to be priced on a cost-basis in a manner which will facilitate the achievement of economic efficiency in the NHS internal market. Surveys of hospitals in 1991 and 1994 established the cost methods adopted in deriving the prices for healthcare contracts in the first year of the market and three years on. An in-depth view of the costing for pricing process was gained through case studies. Hospitals had inadequate cost information on which to price healthcare contracts at the inception of the internal market: prices did not reflect the relative performance of healthcare providers sufficiently closely to enable the market's espoused efficiency aims to be achieved. Price variations were often due to differing costing approaches rather than efficiency. Furthermore, price comparisons were often meaningless because of inadequate definition of the services (products). In April 1993, the NHS Executive issued guidance on costing for contracting to all NHS providers in an attempt to improve the validity of price comparisons between alternative providers. The case studies and the 1994 survey show that although price comparison has improved, considerable problems remain. Consistency is not assured, and the problem of adequate product definition is still to be solved. Moreover, the case studies clearly highlight the mismatch of rigid, full-cost pricing rules with both the financial management considerations at local level and the emerging internal market(s). Incentives exist to cost-shift, and healthcare prices can easily be manipulated. In the search for a new health policy paradigm to replace traditional bureaucratic provision, cost-based pricing cannot be used to ensure a more efficient allocation of healthcare resources.

An assessment of factors affecting performance and growth of new technology based firms in the UK

New Technology Based Firms (NTBF) are considered to be important for the economic development of a country in regards to both employment growth and innovative activity. The latter is believed to contribute significantly to the increase in productivity and therefore the competitiveness of UK’s economy. This study contributes to the above literature by investigating two of the factors believed to limit the growth of such firms in the UK. The first concerns the existence of a ‘knowledge gap’ while the second the existence of a ‘financial gap’. These themes are developed along three main research lines. Firstly, based upon the human capital theory initially proposed by Backer (1964) new evidence is provided on the human capital characteristics (experience and education) of the current UK NTBF entrepreneurs. Secondly, the causal relationship between general and specific human capital (as well as their interactions) upon the company performance and growth is investigated via its traditional direct effect as well as via its indirect effect upon the access to external finance. Finally, more light is shed on the financial structure and the type of financial constraints that high-tech firms face at start-up. In particular, whether a financial gap exists is explored by distinguishing between the demand and the supply of external finance as well as by type of external source of financing. The empirical testing of the various research hypotheses has been obtained by carrying out an original survey of new technology based firms defined as independent companies, established in the past 25 years in R&D intensive sectors. The resulting dataset contains information for 412 companies on a number of general company characteristics and the characteristics of their entrepreneurs in 2004. Policy and practical implications for future and current entrepreneurs and also providers of external finance are provided.

A techno-economic study of the recycling of mixed plastics to useful products

The techno-economic implications of recycling the components of mixed plastics waste have been studied in a two-part investigation: (a) An economic survey of the prospects for plastics recycling, the plastics waste arisings from retailing, building, automotive, light engineering and chemical industries have been surveyed by mans of questionnaires and interviews. This was partially successful and indicated that very considerable quantities of relatively clean plastics packaging was available in major department chains and household stores. The possibility of devising collection systems for such sources, which do not lead to any extra cost, have been suggested. However, the household collection of plastics waste has been found to be uneconomic due to high cost of collection, transportation and lack of markets for the end products. (b) In a technical study of blends of PE/PP and PE/PS which are found in admixture in waste plastics, it has been shown that they exhibit poor mechanical properties due to incompatibility. Consequently reprocessing of such unsegregated blends results in products of little technological value. The inclusion of some commercial block and graft copolymers which behave as solid phase dispersants (SPES) increase the toughness of the blends (e.g. EPDM in PE/PP blend and SBS in PE/PS blend). Also, EPDM is found to be very effective for improving the toughness of single component polypropylene. However, the improved Technical properties of such blends have been accompanied by a fast rate of photo-oxidation and loss of toughness due to the presence of unsaturation in SPD's. The change in mechanical properties occurring during oven ageing and ultra-violet light accelerated weathering of these binary and ternary blends was followed by a viscoelastonetric technique (Rheovibron) over 9,, wide range of temperatures, impact resistance at room temperature (20-41'G) and changes in functional groups (i.e. carbonyl and trans-1,4-polybutadiene). Also the heat and light stability of single and mixed plastics to which thiol antioxidants were bound to SPE1 segment have been studied and compared with conventional antioxidants. The long-term performance of the mixed plastics containing SPE1 have been improved significantly by the use of conventional and bound antioxidants. It is concluded that an estimated amount of 30000 tonnes/year of plastics waste is available from department chains and household stores which can be converted to useful end products. This justifies pilot-experiments in collaboration with supermarkets, recyclers and converters by use of low cost SPD's and additives designed to make the materials more compatible.

A techno-economic assessment of the use of fast pyrolysis bio-oil from UK energy crops in the production of electricity and combined heat and power

This thesis investigates the cost of electricity generation using bio-oil produced by the fast pyrolysis of UK energy crops. The study covers cost from the farm to the generator’s terminals. The use of short rotation coppice willow and miscanthus as feedstocks was investigated. All costs and performance data have been taken from published papers, reports or web sites. Generation technologies are compared at scales where they have proved economic burning other fuels, rather than at a given size. A pyrolysis yield model was developed for a bubbling fluidised bed fast pyrolysis reactor from published data to predict bio-oil yields and pyrolysis plant energy demands. Generation using diesel engines, gas turbines in open and combined cycle (CCGT) operation and steam cycle plants was considered. The use of bio-oil storage to allow the pyrolysis and generation plants to operate independently of each other was investigated. The option of using diesel generators and open cycle gas turbines for combined heat and power was examined. The possible cost reductions that could be expected through learning if the technology is widely implemented were considered. It was found that none of the systems analysed would be viable without subsidy, but with the current Renewable Obligation Scheme CCGT plants in the 200 to 350 MWe range, super-critical coal fired boilers co-fired with bio-oil, and groups of diesel engine based CHP schemes supplied by a central pyrolysis plant would be viable. It was found that the cost would reduce with implementation and the planting of more energy crops but some subsidy would still be needed to make the plants viable.

Lumped dispersion mapping and performance margins in existing SMF-DCF terrestrial links

We demonstrate that the transmission of 40 Gbits/s return-to-zero differential phase-shift keying (RZ-DPSK) signals is robust to lumped dispersion mapping on a typical installed terrestrial single-mode fiber/dispersion compensating fiber (SMF-DCF) link and will withstand, in this case, propagation through over 800 km of SMF with zero in-line group-velocity dispersion compensation while maintaining similar performance to configurations with periodic mapping. We establish that upgrading similar point-to-point links, which have lumped dispersion maps, are compatible with 40 Gbits/s RZ-DPSK and that economic benefits can be realized when implementing lumped dispersion mapping in new 40 Gbits/s RZ-DPSK terrestrial links, while incurring a relatively low performance penalty. (c) 2008 Optical Society of America.

The economic impact of high growth start-ups:understanding the challenge for policy in the UK

Objectives The creation of more high-growth firms continues to be a key component of enterprise policy throughout the countries of the OECD. In the UK the developing enterprise policy framework highlights the importance of supporting businesses with growth potential. The difficulty, of course, is the ability of those delivering business support policies to accurately identify those businesses, especially at start-up, which will benefit from interventions and experiences an enhanced growth performance. This paper has a core objective of presenting new data on the number of high growth firms in the UK and providing an assessment of their economic significance. Approach This paper uses a specially created longitudinal firm-level database based on the Inter-Departmental Business Register (IDBR) held by the Office of National Statistics (ONS) for all private sector businesses in the UK for the period 1997-2008 to investigate the share of high-growth firms (including a sub-set of start-up more commonly referred to as gazelles) in successive cohorts of start-ups. We apply OECD definitions of high growth and gazelles to this database and are able to quantify for the first time their number (disaggregated by sector, region, size) and importance (employment and sales). Prior Work However, what is lacking at the core of this policy focus is any comprehensive statistical analysis of the scale and nature of high-growth firms in cohorts of new and established businesses. The evidence base in response to the question “Why do high-growth firms matter?” is surprisingly weak. Important work in this area has been initiated by Bartelsman et al., (2003),Hoffman and Jünge (2006) and Henreksen and Johansson (2009) but to date work in the UK has been limited (BERR, 2008b). Results We report that there are ~11,500 high growth firms in the UK in both 2005 and 2008. The share of high growth start-ups in the UK in 2005 (6.3%) was, contrary to the widely held perception in policy circles, higher than in the United States (5.2%). Of particular interest in the analysis are the growth trajectories (pattern of growth) of these firms as well as the extent to which they are restricted to technology-based or knowledge-based sectors. Implications and Value Using hitherto unused population data for the first time we have answered a fundamental research and policy question on the number and scale of high growth firms in the UK. We draw the conclusion that this ‘rare’ event does not readily lend itself to policy intervention on the grounds that the significant effort needed to identify such businesses ex ante would appear unjustified even if it was possible.

Entry, reforms complementarity and performance:a tale of two Indian manufacturing sectors

In this paper, we use plant-level data from two Indian industries, namely, electrical machinery and textiles, to examine the empirical relationship between structural reforms like abandonment of entry restrictions to the product market, competition and firm-level productivity and efficiency. These industries have faced different sets of policies since Independence but both were restricted in the adoption of technology and in the development of optimal scales of production. They also belonged to the first set of industries that benefited from the liberalization process started in the 1980s. Our results suggest that both the industries have improved their efficiency and scales of operation by the turn of the century. However, the process of adjustment seems to have been worked out more fully for electrical machinery. We also find evidence of spatial fragmentation of the market as late as 2000–2001. Gains in labour productivity were much more evident in states that either have a strong history of industrial activity or those that have experienced significant improvements in business environment since 1991.

Economic transition in Central Europe and the Commonwealth of Independent States

Fifteen years ago, twenty-seven countries in Europe and Central Asia embarked on their economic transition paths. For some, the outcome was a considerable success. Several others are still struggling to shed the inheritance of the past and to correct more recent policy mistakes. Why were post-Communist recessions so long in some countries and growth disappointing? Why was fiscal performance so different? Was democracy a factor, which facilitated reforms or rather slowed them down? This book discusses these questions in the context of new empirical evidence, including a critical examination of the main themes in the economics of transition.

Experimental investigation of performance, emission and combustion characteristics of an indirect injection multi-cylinder CI engine fuelled by blends of de-inking sludge pyrolysis oil with biodiesel

De-inking sludge can be converted into useful forms of energy to provide economic and environmental benefits. In this study, pyrolysis oil produced from de-inking sludge through an intermediate pyrolysis technique was blended with biodiesel derived from waste cooking oil, and tested in a multi-cylinder indirect injection type CI engine. The physical and chemical properties of pyrolysis oil and its blends (20 and 30 vol.%) were measured and compared with those of fossil diesel and pure biodiesel (B100). Full engine power was achieved with both blends, and very little difference in engine performance and emission results were observed between 20% and 30% blends. At full engine load, the brake specific fuel consumption on a volume basis was around 6% higher for the blends when compared to fossil diesel. The brake thermal efficiencies were about 3-6% lower than biodiesel and were similar to fossil diesel. Exhaust gas emissions of the blends contained 4% higher CO2 and 6-12% lower NOx, as compared to fossil diesel. At full load, CO emissions of the blends were decreased by 5-10 times. The cylinder gas pressure diagram showed stable engine operation with the 20% blend, but indicated minor knocking with 30% blend. Peak cylinder pressure of the 30% blend was about 5-6% higher compared to fossil diesel. At full load, the peak burn rate of combustion from the 30% blend was about 26% and 12% higher than fossil diesel and biodiesel respectively. In comparison to fossil diesel the combustion duration was decreased for both blends; for 30% blend at full load, the duration was almost 12% lower. The study concludes that up to 20% blend of de-inking sludge pyrolysis oil with biodiesel can be used in an indirect injection CI engine without adding any ignition additives or surfactants.

What can situated learning theory tell us about leading to develop organizational learning capabilities for entrepreneurial performance? lessons from a knowledge-intensive small firm

Although the role of strategic leadership in developing organizational learning capabilities has been examined to a certain extent, the specific behaviors and mechanisms through which these capabilities are developed have not been adequately understood. Paucity of research in this direction is even more conspicuous in a small firm/entrepreneurship context, which has been linked to innovation, economic growth, and employment generation. Reporting on an ethnographic study of a knowledge-intensive, growth-oriented small firm, this article addresses this gap in the literature by integrating strategic leadership and organizational learning theory in an entrepreneurship context. In this undertaking, situated learning theory is used as the major analytical lens, to shed light on how strategic leadership can build organizational learning capabilities that underpin entrepreneurial performance in small firms. Finally, implications for situated learning theory as an organizational learning perspective and leadership practice in an entrepreneurship context are submitted. © 2012 Wiley Periodicals, Inc.

Performance management systems:a global perspective

Performance management is the process by which organizations set goals, determine standards, assign and evaluate work, and distribute rewards. But when you operate across different countries and continents, performance management strategies cannot be one dimensional. HR managers need systems that can be applied to a range of cultural values. This important and timely text offers a truly global perspective on performance management practices. Split into two parts, it illustrates the key themes of rater motivation, rater-ratee relationships and merit pay, and outlines a model for a global appraisal process. This model is then screened through a range of countries, including Germany, Japan, USA, Turkey, China, India and Mexico. Using case studies and discussion questions, and written by local experts, this text outlines the tools needed to understand and ‘measure’ performance in a range of socio-economic and cultural contexts. It is essential reading for students and practitioners alike working in human resources, international business and international management.