Vivianite and siderite in lateritic iron crust: an example of bioreduction

Lateritic iron crust (LIC) samples from Padauari (AM) were analysed by XRD, optical microscopy and SEM-EDS. The equilibrium of iron minerals (IM) was studied using Eh-pH diagram. It was shown that the minerals of the LIC are goethite (a-FeOOH), vivianite [Fe₃(PO₄)₂.8H₂O] and siderite (FeCO₃). Carbonate grains are a solid solution of FeCO₃-MnCO₃. The LIC presents textures and structures of dissolution of IM. The siderite and vivianite are stable from Eh =-0.3 to 0.0 V and pH=5.0-7.5. These results indicate that vivianite and siderite are products of bioreduction through biogenic dissolution of IM, the new conditions of ecosystems of the Amazon region.

Opalas gemológicas do Piauí: gênese revelada por microtermometria e minerais associados

As opalas de Pedro II e Buriti dos Montes, no estado do Piauí, constituem as mais importantes ocorrências brasileiras dessa gema, tanto em termos de volume quanto pela qualidade gemológica, que é comparável à das famosas opalas australianas. No entanto, a informalidade na extração e comercialização destas opalas, assim como a falta de informações quanto à gênese destes depósitos não permitem a prospecção por novas jazidas e o estabelecimento de um certificado de procedência para as opalas do Piauí que permitisse sua inserção formal no mercado gemológico internacional. Alguns autores têm se dedicado ao estudo dessas opalas, revelando fortes evidências de sua origem hidrotermal, mas até então, nenhum trabalho abordou as características físico-químicas dos fluidos que teriam originado esses depósitos de opalas. Diante disso, o principal objetivo deste trabalho foi entender o sistema hidrotermal responsável pela gênese das opalas do Piauí, ou seja, caracterizar os fluidos que originaram a mineralização e mostrar sua relação com o contexto geológico da região. Os municípios de Pedro II e Buriti dos Montes se localizam na porção nordeste do estado do Piauí, a aproximadamente 230 km a leste da capital Teresina, e as ocorrências de opala se encontram na porção basal da Bacia do Parnaíba, constituindo veios e vênulas nos arenitos dos grupos Serra Grande (Buriti dos Montes) e Canindé (Pedro II), os quais são seccionados por soleiras e diques de diabásio da Formação Sardinha. Elas também ocorrem cimentando brechas e como depósitos coluvionares e de paleocanal. Associados às opalas, localmente encontram-se veios de quartzo, calcedônia, barita e hematita (ou goethita). De maneira geral, as opalas de Pedro II apresentam jogo de cores, são predominantemente brancas ou azuladas com aspecto leitoso, semitranslúcidas a opacas e com inclusões sólidas pouco aparentes. Em contrapartida, as opalas de Buriti dos Montes não apresentam jogo de cores, a cor varia entre amarelo claro e vermelho amarronzado, são semitransparentes a translúcidas e contêm grande variedade de inclusões sólidas. Os dados obtidos revelam que as opalas de Pedro II são tipicamente do tipo amorfo (opala-A), enquanto as opalas de Buriti dos Montes variam entre amorfas e cristobalita-tridimita (opala-CT). Na opala preciosa, o típico jogo de cores é causado pelo arranjo regular das esferas de sílica que as constituem. A ausência de cimento opalino entre as esferas reforça a beleza desse efeito. Em contrapartida, as opalas laranja não apresentam jogo de cores, mas têm maior transparência devido ao diminuto tamanho das esferas. As inclusões sólidas também produzem belos efeitos nas opalas estudadas, principalmente na variedade laranja, que é mais transparente. Além disso, o conjunto de inclusões sólidas revela características intrínsecas aos processos hidrotermais que originaram as opalas estudadas. Agregados botrioidais, dendríticos e nodulares são exemplos de inclusões formadas por fragmentos dos arenitos hospedeiros carreados pelos fluidos hidrotermais que geraram as opalas. As inclusões sólidas também têm relação direta com a cor das opalas. Nas opalas de Buriti dos Montes, os tons de vermelho, laranja e amarelo são produzidos pela dissolução parcial das inclusões constituídas por oxihidróxidos de Fe. De maneira semelhante, a cor verde nas opalas preciosas está relacionada aos microcristais de Co-pentlandita inclusos nas mesmas. O conjunto de minerais associados às opalas conduz a uma assinatura mineralógicogeoquímica marcada pelos elevados teores de Fe e Al nas opalas com inclusões de hematita/goethita e caulinita, e assim também com aumento considerável dos teores de elementos terras raras nas opalas em que se concentram as inclusões de caulinita e apatita. Entre os elementos-traço, Ba é o mais abundante, e provavelmente foi incorporado pelo fluido hidrotermal, tendo em vista que veios de barita são encontrados com frequência nessa região da Bacia do Parnaíba. Várias feições como estruturas de fluxo nas opalas, corrosão e dissolução parcial dos cristais de quartzo hialino e de inclusões mineralógicas, vênulas de quartzo hidrotermal sobrecrescidas aos grãos detríticos, e zoneamento dos cristais de quartzo confirmam que essas opalas têm origem hidrotermal. A ruptura do Gondwana teria provocado um vasto magmatismo básico fissural, que por sua vez foi responsável pelo aporte de calor que gerou as primeiras células convectivas de fluidos quentes. A água contida nos arenitos certamente alimentou o sistema e se enriqueceu em sílica através da dissolução parcial ou total dos próprios grãos de quartzo dos arenitos. Este fluido hidrotermal foi posteriormente aprisionado em sistemas de fraturas e nelas se resfriou, precipitando a opala e minerais associados.

Estudo das reações no sistema 'CU'-'AL'-'AG'-'MN'

Pós-graduação em Química - IQ

Analysis of ibuprofen enantiomers in rat plasma by liquid chromatography with tandem mass spectrometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of colloidal silica on the mechanical properties of fiber-cement reinforced with cellulosic fibers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface modification of polymeric materials by cold atmospheric plasma jet

In this work we report the surface modification of different engineering polymers, such as, polyethylene terephthalate (PET), polyethylene (PE) and polypropylene (PP) by an atmospheric pressure plasma jet (APPJ). It was operated with Ar gas using 10 kV, 37 kHz, sine wave as an excitation source. The aim of this study is to determine the optimal treatment conditions and also to compare the polymer surface modification induced by plasma jet with the one obtained by another atmospheric pressure plasma source the dielectric barrier discharge (DBD). The samples were exposed to the plasma jet effluent using a scanning procedure, which allowed achieving a uniform surface modification. The wettability assessments of all polymers reveal that the treatment leads to reduction of more than 40 degrees in the water contact angle (WCA). Changes in surface composition and chemical bonding were analyzed by x-ray photoelectron spectroscopy (XPS) and Fourier-Transformed Infrared spectroscopy (FTIR) that both detected incorporation of oxygen-related functional groups. Surface morphology of polymer samples was investigated by Atomic Force Microscopy (AFM) and an increase of polymer roughness after the APPJ treatment was found. The plasma-treated polymers exhibited hydrophobic recovery expressed in reduction of the O-content of the surface upon rinsing with water. This process was caused by the dissolution of low molecular weight oxidized materials (LMWOMs) formed on the surface as a result of the plasma exposure. (C) 2014 Elsevier B.V. All rights reserved.

The Th17 pathway in the peripheral lung microenvironment interacts with expression of collagen V in the late state of experimental pulmonary fibrosis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The physicochemical characterization and in vivo response of micro/nanoporous bioactive ceramic particulate bone graft materials

In this study, the physicochemical characteristics of calcium phosphate based bioactive ceramics of different compositions and blends presenting similar micro/nanoporosity and micrometer scale surface texture were characterized and evaluated in an in vivo model. Prior to the animal experiment, the porosity, surface area, particle size distribution, phase quantification, and dissolution of the materials tested were evaluated. The bone regenerative properties of the materials were evaluated using a rabbit calvaria model. After 2, 4, and 8 weeks, the animals were sacrificed and all samples were subjected to histologic observation and histomorphometric analysis. The material characterization showed that all materials tested presented variation in particle size, porosity and composition with different degrees of HA/TCP/lower stoichiometry phase ratios. Histologically, the calvarial defects presented temporal bone filling suggesting that all material groups were biocompatible and osteoconductive. Among the different materials tested, there were significant differences found in the amount of bone formation as a function of time. At 8 weeks, the micro/nanoporous material presenting similar to 55,TCP:45%,HA composition ratio presented higher amounts of new bone regeneration relative to other blends and a decrease in the amount of soft tissue infiltration. (C) 2014 Elsevier B.V. All rights reserved.

Mechanisms of SnO2 Nanoparticles Formation and Growth in Acid Ethanol Solution Derived from SAXS and Combined Raman-XAS Time-Resolved Studies

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Electrochemical study of arsenopyrite weathering

Cyclic voltammograms and capacitance measurements are presented to characterize the mineral response at relatively moderate environmental conditions, pH 4.5 and T = 25degreesC. The experiments involve examining the rates of oxidation and the surface morphology of arsenopyrite, which is oxidized abiotically. The semiconducting properties of the mineral have been investigated in attempt to gain additional information of FeAsS dissolution behavior in acidic solutions at potentials close to the open circuit potential of the mineral. A mechanistic pathway for the anodic dissolution of arsenopyrite in open circuit conditions is also suggested. At high overpotentials, anodic reactions produce mainly sulfate and arsenate ions and may be described as hole limited. The reduction of orpiment-like compounds at potentials more negative than the open circuit potential is discussed.

Facile synthesis and characterization of ZrO2 nanoparticles prepared by the AOP/hydrothermal route

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On Switched Regulator Design of Uncertain Nonlinear Systems Using Takagi-Sugeno Fuzzy Models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Beneficial Effects of Adiponectin on Periodontal Ligament Cells under Normal and Regenerative Conditions

Type 2 diabetes and obesity are increasing worldwide and linked to periodontitis, a chronic disease which is characterized by the irreversible destruction of the tooth-supporting tissues, that is, periodontium. The mechanisms underlying the association of diabetes mellitus and obesity with periodontal destruction and compromised periodontal healing are not well understood, but decreased plasma levels of adiponectin, as found in diabetic and obese individuals, might be a critical mechanistic link. The aim of this in vitro study was to examine the effects of adiponectin on periodontal ligament (PDL) cells under normal and regenerative conditions, and to study the regulation of adiponectin and its receptors in these cells. Adiponectin stimulated significantly the expression of growth factors and extracellular matrix, proliferation, and in vitro wound healing, reduced significantly the constitutive tumor necrosis factor-alpha expression, and caused a significant upregulation of its own expression. The beneficial actions of enamel matrix derivative on a number of PDL cell functions critical for periodontal regeneration were partially enhanced by adiponectin. The periodontopathogen Porphyromonas gingivalis inhibited the adiponectin expression and stimulated the expression of its receptors. In conclusion, reduced levels of adiponectin, as found in type 2 diabetes and obesity, may compromise periodontal health and healing.

Processing and characterization of ablative composites used in rocket motors

The main objective of this research work was to obtain two formulations of ablative composites. These composites are also known as ablative structural composites, for applications in atmospherically severe conditions according to the high-temperature, hot gaseous products flow generated from the burning of solid propellants. The formulations were manufactured with phenolic resin reinforced with chopped carbon fiber. The composites were obtained by the hot compression molding technique. Another purpose of this work was to conduct the physical and chemical characterization of the matrix, the reinforcements and the composites. After the characterization, a nozzle divergent of each formulation was manufactured and its performance was evaluated through the rocket motor static firing test. According to the results found in this work, it was possible to observe through the characterization of the raw materials that phenolic resins showed peculiarities in their properties that differentiate one from the other, but did not exhibit significant differences in performance as a composite material for use in ablation conditions. Both composites showed good performance for use in thermal protection, confirmed by firing static tests (rocket motor). Composites made with phenolic resin and chopped carbon fiber showed that it is a material with excellent resistance to ablation process. This composite can be used to produce nozzle parts with complex geometry or shapes and low manufacturing cost.

Development of organic-inorganic polymeric film formers for controlled drug release and wound care

Film forming polymeric systems represents a new and unexplored technology of systems forskin or wounds protection and for controlled drug release. The aim of this work was to study the use of polymeric organic-inorganic ureasil-polyether hybrids synthesized by the sol-gel process as film forming system containing silver sulfadiazine as model drug. The film formationtime can be controlled by changing the precursor/catalyst ratio used during the step of hydrolysis and condensations. The results showed that the precursor/catalyst proportion influences both the visual characteristics and time required to form the film. The precursor/catalyst ratio equal to 20.8 m/v was considered ideal due to promote the homogeneous and transparent film formation in less than 5 minutes. The release profile of sulfadiazine is dependent on the characteristics of the matrixes: matrix more hydrophobic as ureasil-POP provided a slowed released mainly due to the low swelling of the matrix. The more hydrophilic ureasil-POE matrix presents a large capacity to swell and favors the faster release of the drug. The set of results showed the possibility of future use of these systems for treating wounds caused by burns.