On Reynolds number and scaling effects in microchannel flows

This paper presents a numerical study of the Reynolds number and scaling effects in microchannel flows. The configuration includes a rectangular, high-aspect ratio microchannel with heat sinks, similar to an experimental setup. Water at ambient temperature is used as a coolant fluid and the source of heating is introduced via electronic cartridges in the solids. Two channel heights, measuring 0.3 mm and 1 mm are considered at first. The Reynolds number varies in a range of 500-2200, based on the hydraulic diameter. Simulations are focused on the Reynolds number and channel height effects on the Nusselt number. It is found that the Reynolds number has noticeable influences on the local Nusselt number distributions, which are in agreement with other studies. The numerical predictions of the dimensionless temperature of the fluid agree fairly well with experimental measurements; however the dimensionless temperature of the solid does exhibit a significant discrepancy near the channel exit, similar to those reported by other researchers. The present study demonstrates that there is a significant scaling effect at small channel height, typically 0.3 mm, in agreement with experimental observations. This scaling effect has been confirmed by three additional simulations being carried out at channel heights of 0.24 mm, 0.14 mm and 0.1 mm, respectively. A correlation between the channel height and the normalized Nusselt number is thus proposed, which agrees well with results presented.

Public sector pay in the UK: has the historic pattern of public/private sector pay movements been broken?

The historic pattern of public sector pay movements in the UK has been counter-cyclical with private sector pay growth. Periods of relative decline in public sector pay against private sector movements have been followed by periods of ‘catch-up’ as Government controls are eased to remedy skill shortages or deal with industrial unrest among public servants. Public sector ‘catch up’ increases have therefore come at awkward times for Government, often coinciding with economic downturn in the private sector (Trinder 1994, White 1996, Bach 2002). Several such epochs of public sector pay policy can be identified since the 1970s. The question is whether the current limits on public sector pay being imposed by the UK Government fit this historic pattern or whether the pattern has been broken and, if so, how and why? This paper takes a historical approach in considering the context to public sector pay determination in the UK. In particular the paper seeks to review the period since Labour came into office (White and Hatchett 2003) and the various pay ‘modernisation’ exercises that have been in process over the last decade (White 2004). The paper draws on national statistics on public sector employment and pay levels to chart changes in public sector pay policy and draws on secondary literature to consider both Government policy intentions and the impact of these policies for public servants.

English Channel towed sledge seabed images. Phase 1: scoping study and example analysis

During the 1970’s and 1980’s, the late Dr Norman Holme undertook extensive towed sledge surveys in the English Channel and some in the Irish Sea. Only a minority of the resulting images were analysed and reported before his death in 1989 but logbooks, video and film material has been archived in the National Marine Biological Library (NMBL) in Plymouth. A scoping study was therefore commissioned by the Joint Nature Conservation Committee and as a part of the Mapping European Seabed Habitats (MESH) project to identify the value of the material archived and the procedure and cost to undertake further work. The results of the scoping study are: 1. NMBL archives hold 106 videotapes (reel-to-reel Sony HD format) and 59 video cassettes (including 15 from the Irish Sea) in VHS format together with 90 rolls of 35 mm colour transparency film (various lengths up to about 240 frames per film). These are stored in the Archive Room, either in a storage cabinet or in original film canisters. 2. Reel-to-reel material is extensive and had already been selectively copied to VHS cassettes. The cost of transferring it to an accepted ‘long-life’ medium (Betamax) would be approximately £15,000. It was not possible to view the tapes as a suitable machine was not located. The value of the tapes is uncertain but they are likely to become beyond salvation within one to two years. 3. Video cassette material is in good condition and is expected to remain so for several more years at least. Images viewed were generally of poor quality and the speed of tow often makes pictures blurred. No immediate action is required. 4. Colour transparency films are in good condition and the images are very clear. They provide the best source of information for mapping seabed biotopes. They should be scanned to digital format but inexpensive fast copying is problematic as there are no between-frame breaks between images and machines need to centre the image based on between-frame breaks. The minimum cost to scan all of the images commercially is approximately £6,000 and could be as much as £40,000 on some quotations. There is a further cost in coding and databasing each image and, all-in-all it would seem most economic to purchase a ‘continuous film’ scanner and undertake the work in-house. 5. Positional information in ships logs has been matched to films and to video tapes. Decca Chain co-ordinates recorded in the logbooks have been converted to latitude and longitude (degrees, minutes and seconds) and a further routine developed to convert to degrees and decimal degrees required for GIS mapping. However, it is unclear whether corrections to Decca positions were applied at the time the position was noted. Tow tracks have been mapped onto an electronic copy of a Hydrographic Office chart. 6. The positions of start and end of each tow were entered to a spread sheet so that they can be displayed on GIS or on a Hydrographic Office Chart backdrop. The cost of the Hydrographic Office chart backdrop at a scale of 1:75,000 for the whole area was £458 incl. VAT. 7. Viewing all of the video cassettes to note habitats and biological communities, even by an experienced marine biologist, would take at least in the order of 200 hours and is not recommended. English Channel towed sledge seabed images. Phase 1: scoping study and example analysis. 6 8. Once colour transparencies are scanned and indexed, viewing to identify seabed habitats and biological communities would probably take about 100 hours for an experienced marine biologist and is recommended. 9. It is expected that identifying biotopes along approximately 1 km lengths of each tow would be feasible although uncertainties about Decca co-ordinate corrections and exact positions of images most likely gives a ±250 m position error. More work to locate each image accurately and solve the Decca correction question would improve accuracy of image location. 10. Using codings (produced by Holme to identify different seabed types), and some viewing of video and transparency material, 10 biotopes have been identified, although more would be added as a result of full analysis. 11. Using the data available from the Holme archive, it is possible to populate various fields within the Marine Recorder database. The overall ‘survey’ will be ‘English Channel towed video sled survey’. The ‘events’ become the 104 tows. Each tow could be described as four samples, i.e. the start and end of the tow and two areas in the middle to give examples along the length of the tow. These samples would have their own latitude/longitude co-ordinates. The four samples would link to a GIS map. 12. Stills and video clips together with text information could be incorporated into a multimedia presentation, to demonstrate the range of level seabed types found along a part of the northern English Channel. More recent images taken during SCUBA diving of reef habitats in the same area as the towed sledge surveys could be added to the Holme images.

Trophodynamics and stability of regional scale ecosystems in the Northeast Atlantic

This study addresses the long-term stability of three trophic groupings in the Northeast Atlantic at regional scales. The most abundant taxa representing phytoplankton, herbivorous copepods, and carnivorous zooplankton were examined from the Continuous Plankton Recorder database. Multivariate control charts using a Bray–Curtis similarity metric were used to assess whether fluctuations within trophic groupings were within or beyond the expected variability. Two evaluation periods were examined: annual changes between 1960 and 1999 (2000–2009 baseline) and recent changes between 2000 and 2009 (1960–1999 baseline). The trends over time in abundance/biomass of trophic levels were region-specific, especially in carnivorous copepods, where abundance did not mirror trends in the overall study area. The stability of phytoplankton was within the expected limits, although not in 2008 and 2009. Higher trophic levels were less stable, perhaps reflecting the added complexity of interactions governing their abundance. In addition, some regions were consistently less stable than others. Correlations in stability between adjacent trophic levels were positive at large marine ecosystem scale but generally non-significant at regional scales. The study suggests that certain regions may be particularly vulnerable to periods of instability in community structure. The benefits of using the control chart method rather than other multivariate measures of plankton dynamics are discussed.

Ecological Investigations with the Continuous Plankton Recorder: The Zooplankton (other than Copepoda and Young Fish) in the Southern North Sea, 1932-37.

I. The report describes the main monthly changes in the distribution and abundance of the zooplankton, other than Copepoda and young fish (dealt with in separate reports), over the southern part of the North Sea from 1932 to 1937. The work is part of the survey carried out by Continuous Plankton Recorders towed at a depth of 10 metres on regular steamship lines between England and the Continent. 2. The limitations to the sampling method are discussed, and it is shown to be unsuitable for recording Mysidacea and Euphausiacea on account of their marked diurnal variation due presumably to vertical migration; they are omitted from the report. 3. The changing distribution of Sagitta, Limacina, Clione, Lamellibranch larvae, Cladocera, Caprellid Amphipoda, Decapod larvae, Echinoderm larvae and Oikopleura are shown in a series of monthly charts while their seasonal fluctuations are compared in time-chart histograms. 4. The Alima larvae of Squilla are recorded on a few occasions in the regions where the Channel opens into the North Sea. 5. The distributional characteristics of the different forms, i.e. their tendencies to even or " patchy " production, are compared.

The census and women's work in Rangoon, 1872–1931

The colonial census was a bureaucratic device which provided an essential abstraction from social reality, a ‘statistical fix’ designed to map individual social groups in space. This paper considers the contradictions associated with colonial knowledge systems as reflected in the census grafted onto Burmese society in the nineteenth and early twentieth centuries. It attempts to chart the general adoption and adaptation, in the Burmese context, of a classificatory scheme which categorised labour as either productive or unproductive. Colonialism introduced new attitudes towards work and labour which reinforced patriarchal values which contrasted with more egalitarian Burmese socio-economic systems. The paper suggests that a simple classification of women workers as either productive or unproductive in the Burmese census between 1872 and 1931 resulted in the devaluation of their status as workers. This devaluation was a function of both real economic transformation taking place in the empire and changes in census classification, reflecting a gendering of occupations that undermined the cultural norms of Burmese society. The material result was that women became statistically less visible as economically productive workers. Such ascriptions of value to women workers were largely informed by moral considerations originating in England.

Fault reconstruction in linear dynamic systems using multivariate statistics

Treasure et al. (2004) recently proposed a new sub space-monitoring technique, based on the N4SID algorithm, within the multivariate statistical process control framework. This dynamic-monitoring method requires considerably fewer variables to be analysed when compared with dynamic principal component analysis (PCA). The contribution charts and variable reconstruction, traditionally employed for static PCA, are analysed in a dynamic context. The contribution charts and variable reconstruction may be affected by the ratio of the number of retained components to the total number of analysed variables. Particular problems arise if this ratio is large and a new reconstruction chart is introduced to overcome these. The utility of such a dynamic contribution chart and variable reconstruction is shown in a simulation and by application to industrial data from a distillation unit.

Double potential step chronoamperometry at microdisk electrodes: simulating the case of unequal diffusion coefficients

An efficient approach to the simulation of the double potential step chronoamperometry at a microdisk electrode based on an exponentially expanding time grid and conformal mapping of the space is presented. The dimensionless second potential step flux data are included as a function of the first potential step duration and the ratio of the diffusion coefficients of the reacting species allowing instant analysis of the experimental double potential step chronoamperograms without a need for simulation. The values of the diffusion coefficients are determined for several test systems and found to be in good agreement with existing literature data. (C) 2004 Elsevier B.V. All rights reserved.

Graphical determination of network limits for wind power integration

A graphical method is presented for determining the capability of individual system nodes to accommodate wind power generation. The method is based upon constructing a capability chart for each node at which a wind farm is to be connected. The capability chart defines the domain of allowable power injections at the candidate node, subject to constraints imposed by voltage limits, voltage stability and equipment capability limits being satisfied. The chart is first derived for a two-bus model, before being extended to a multi-node power system. The graphical method is employed to derive the chart for a two-node system, as well as its application to a multi-node power system, considering the IEEE 30-bus test system as a case study. Although the proposed method is derived with the intention of determining the wind farm capacity to be connected at a specific node, it can be used for the analysis of a PQ bus loading as well as generation.

Stroke presentation and hospital management: comparison of neighbouring healthcare systems with differing health policies.

Background: Acute stroke care is shaped by healthcare policies. Differing policies in similar populations allow for assessment of policy impact on health and healthcare outcomes. Aims: To compare stroke presentation and hospital care in two adjacent healthcare systems with differing healthcare policies. Methods: Interviews and chart review of consecutive acute stroke admissions in Northern Ireland (n=103) and the Republic of Ireland (n=100). Results: Marked regional contrasts were evident for key aspects of hospital care. Northern Ireland performed significantly better on 15 of 16 quality of care (Sentinel Audit) items. Delivery on standards was significantly better in Northern Ireland for early assessment (Northern Ireland 72%; Republic of Ireland 54%, p

Stability of dust lattice modes in the presence of charged dust grain polarization in plasmas

We discuss the effect of the attractive force associated with overlapping Debye spheres on the dispersion properties of the longitudinal and transverse dust lattice waves in strongly coupled dust crystals. The dust grain attraction is shown to contribute to a destabilization of the longitudinal dust lattice oscillations. The (optic-like) transverse mode dispersion law is shown to change. due to the Debye sphere dressing effect, from the known inverse-dispersive ("backward wave") form into a normal dispersive law (i.e. the group velocity changes sign). The stability of one-dimensionless bi-layers, consisting of (alternating) negatively and positively charged dust particles, is also discussed. The range of parameter values (mainly in terms of the lattice parameter kappa) where the above predictions are valid, are presented. (c) 2005 Elsevier B.V. All rights reserved.

Relativistically correct hole-boring and ion acceleration by circularly polarized laser pulses

The problem of the 'hole-boring' (HB)-type of radiation pressure acceleration of ions by circularly polarized laser pulses interacting with overdense plasmas is considered in the regime where the dimensionless scaling parameter I/rho c(3) becomes large. In this regime a non-relativistic treatment of the 'HB' problem is no longer adequate. A new set of fully relativistic formulae for the mean ion energy and 'HB' velocity is derived and validated against one-dimensional particle-in-cell simulations. It is also found that the finite acceleration time of the ions results in large energy spreads in the accelerated ion beam even under the highly idealized conditions of constant laser intensity and uniform mass density.

'Wee women no more': female partners of republican political prisoners in Belfast

Studies of the female partners of politically motivated prisoners have generally studied women via a caring paradigm. Less well observed are those women who privately transgressed and challenged masculine-centred renditions or political imprisonment. This lacuna in the research dedicated to such women has been constructed around stereotypical depictions of them as a barely visible support network. We argue that the relatively indiscernible appearance of women who challenged such typecasting is attached to a persistent process of gender blindness within which women remain peripheral to wider narratives of collectivity and ideological presentation. We chart how some women actively involved themselves in creating their own identity as active agents, especially when the effects of conflict entered the private sphere.

Vaginal temperature sensing using UHF radio telemetry

User induced errors are common when women repetitively employ conventional probe type thermometers to chart their basal body temperatures in an effort to indicate ovulation. An alternative technique employing a two-part telemetric thermometer is proposed, with low-power, SAWR-controlled UHF radio as the transmission medium. Worn overnight in the vagina, the 1 mu W erp telemetry transmitter sends pulse modulated data continuously to a microcontroller in a nearby receiver; a real time clock enables programmable sampling and storage of the subject's temperature to 0.1 degrees C resolution. Initial clinical results indicate an enhanced performance compared to oral and axillary temperature trends taken by a mercury-in-glass thermometer. Polar plots of both the isolated and body-worn telemetry transmitte are presented; body indced attenuations of up to 30 dB were measured.

Transmission characteristics of a vaginally-worn UHF radio telemeter

A vaginally-worn temperature telemeter may be used by women to chart their basal body temperature for ovulation detection. The telemeter uses a temperature to pulse width converter to key a Colpitts oscillator which is controlled in frequency by a 418 MHz SAW resonator. The circuit’s tank inductor acts as a compact, multi-turn loop antenna with a radiated power in isolation of around 1 uW. The transmission characteristics of the system are affected by the proximity of the human body, which acts as an electrically-large lossy dielectric. The RF link-budget must allow for the reduction in total emitted power, directional body-induced fading, and polarization effects. The polar power patterns of the telemeter were measured for both isolated and in-situ cases, using horizontal and vertical polarization. The power patterns were numerically integrated to determine relative emitted power, and a reference dipole used to determine the emitted power for the isolated device. In isolation the telemeter radiation is vertically polarized and isotropic in nature. With the telemeter in-situ, total body absorption was found to be over 20 dB, with directional fades of up to 40 dB; there was extensive cross-polarization, with up to 60% of radiated power horizontally polarized. With limited radiated power and directional fading, the operating range for the telemeter is limited to single room operation (less than 10m). The majority of RF radiation is absorbed by the body, but the radiation hazard is negligible due to the low power level of the device. The high level of cross-polarization suggests that either horizontal or vertically polarized base-station antennas may be used.