965 resultados para cycles
Resumo:
Most financial and economic time-series display a strong volatility around their trends. The difficulty in explaining this volatility has led economists to interpret it as exogenous, i.e., as the result of forces that lie outside the scope of the assumed economic relations. Consequently, it becomes hard or impossible to formulate short-run forecasts on asset prices or on values of macroeconomic variables. However, many random looking economic and financial series may, in fact, be subject to deterministic irregular behavior, which can be measured and modelled. We address the notion of endogenous volatility and exemplify the concept with a simple business-cycles model.
Resumo:
This article describes the main research results in a new methodology, in which the stages and strategies of the technology integration process are identified and described. A set of principles and recommendations are therefore presented. The MIPO model described in this paper is a result of the effort made regarding the understanding of the main success features of good practices, in the web environment, integrated in the information systems/information technology context. The initial model has been created, based on experiences and literature review. After that, it was tested in the information and technology system units at higher school and also adapted as a result of four cycles of an actionresearch work combined with a case study research. The information, concepts and procedures presented here give support to teachers and instructors, instructional designers and planning teams – anyone who wants to develop effective b‐learning instructions.
Resumo:
In-plane deformation of foams was studied experimentally by subjecting bidisperse foams to cycles of traction and compression at a prescribed rate. Each foam contained bubbles of two sizes with given area ratio and one of three initial arrangements: sorted perpendicular to the axis of deformation (iso-strain), sorted parallel to the axis of deformation (iso-stress), or randomly mixed. Image analysis was used to measure the characteristics of the foams, including the number of edges separating small from large bubbles N-sl, the perimeter (surface energy), the distribution of the number of sides of the bubbles, and the topological disorder mu(2)(N). Foams that were initially mixed were found to remain mixed after the deformation. The response of sorted foams, however, depended on the initial geometry, including the area fraction of small bubbles and the total number of bubbles. For a given experiment we found that (i) the perimeter of a sorted foam varied little; (ii) each foam tended towards a mixed state, measured through the saturation of N-sl; and (iii) the topological disorder mu(2)(N) increased up to an "equilibrium" value. The results of different experiments showed that (i) the change in disorder, Delta mu(2)(N), decreased with the area fraction of small bubbles under iso-strain, but was independent of it under iso-stress; and (ii) Delta mu(2)(N) increased with Delta N-sl under iso-strain, but was again independent of it under iso-stress. We offer explanations for these effects in terms of elementary topological processes induced by the deformations that occur at the bubble scale.
Resumo:
A mat of electrospun cellulose fibers are deposed on transparent conductive oxide covered glass, and two such plates enclose a nematic liquid crystal. Thus two new types of Cellulose based Polymer Dispersed Liquid Crystal devices, based on hydroxypropylcellulose and Cellulose Acetate and the nematic liquid crystal E7 have been obtained. The current-voltage characteristics indicates ionic type conduction. Heating-cooling cycles have been applied on the samples and the activation energies have been determined. Simultaneously with the thermo-stimulated currents, the optical transmission dependence on the d.c. electric field and temperature was registered. ON-OFF switching times have been determined for different control voltages. (C) 2011 Elsevier B.V. All rights reserved.
Resumo:
Objectivo: Pretendeu-se avaliar as modificações no comportamento neuro-motor a nível da funcionalidade do membro superior predominantemente afectado e a sua influência no ciclo da marcha de dois indivíduos com Acidente Vascular Cerebral, face a um programa de intervenção em fisioterapia, segundo uma abordagem baseada no Conceito de Bobath. Foi também objectivo averiguar o impacto qualitativo nos componentes e estados de saúde. Metodologia: A avaliação foi realizada em dois indivíduos com sequelas de Acidente Vascular Cerebral, antes e após o plano de intervenção segundo o Conceito de Bobath, através do registo observacional, da Classificação Internacional de Funcionalidade, Incapacidade e Saúde, da Performance-Oriented Mobility Assessment POMA I, da Time Up and Go Test, da Motor Assessement Scale e da Motor Evaluation Scale for Upper Extremity in Patients. Resultados: Obteve-se um incremento da funcionalidade do membro superior predominantemente afectado, com uma atribuição na Classificação Internacional de Funcionalidade, Incapacidade e Saúde de qualificadores correspondentes a dificuldade ligeira a moderada ao nível da mobilidade e dos auto cuidado após o plano de intervenção, repercutindo-se assim numa diminuição da restrição na participação e limitação da actividade. Houve um aumento de score total em todos os instrumentos e escalas de medidas de avaliação utilizadas, tendo os indivíduos alcançado uma maior funcionalidade do membro superior e um padrão de marcha mais eficiente, com uma menor necessidade de recorrer a estratégias compensatórias de movimento. Conclusão: O plano de intervenção, baseado numa abordagem segundo o Conceito de Bobath, essencialmente dirigido para a obtenção de ganhos funcionais ao nível do membro superior predominantemente afectado nos indivíduos em estudo, parece ter contribuído para induzir mudanças no comportamento neuro-motor, verificando-se uma influência no ciclo de marcha ao nível da qualidade e eficiência do movimento.
Resumo:
A copper C(2)-symmetric bis(oxazoline), CuBox, was introduced in two forms of commercial Y zeolite: a sodium form (NaY) and an ultrastable form (NaUSY). CuBox was introduced by first partially exchanging the sodium cations of both zeolites for copper and then by refluxing the obtained materials with a solution of bis(oxazoline) (Box). Two different loadings were prepared for each form of zeolite. The materials were characterized by copper ICP-AES, elemental analysis, XPS, FTIR, TG, and nitrogen adsorption isotherms at -196 degrees C. Evidence for Box ligand location in the supercages of NaY and NaUSY zeolites and its coordination to the exchanged copper(II) was obtained by the several techniques used. The materials were all active in the cyclopropanation of styrene with ethyldiazoacetate at room temperature and diastereoselective toward trans cydopropanes. Although the materials containing Box showed low enantioselectivities, their catalytic activities were higher than the parent copper exchanged zeolites, and did not decrease with reuse, at least during three consecutive cycles.
Resumo:
Dissertação apresentada à Escola Superior de Educação de Lisboa para obtenção do grau de Mestre em Ciências da Educação - Especialização em Educação Especial, Domínio Cognição e Multideficiência
Resumo:
Dissertação apresentada à Escola Superior de Educação de Lisboa para obtenção do grau de Mestre em Ciências da Educação - Especialização em Supervisão em Educação
Resumo:
Dissertação Apresentada à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Ciências da Educação - Especialidade Supervisão em Educação
Resumo:
A crucial method for investigating patients with coronary artery disease (CAD) is the calculation of the left ventricular ejection fraction (LVEF). It is, consequently, imperative to precisely estimate the value of LVEF--a process that can be done with myocardial perfusion scintigraphy. Therefore, the present study aimed to establish and compare the estimation performance of the quantitative parameters of the reconstruction methods filtered backprojection (FBP) and ordered-subset expectation maximization (OSEM). Methods: A beating-heart phantom with known values of end-diastolic volume, end-systolic volume, and LVEF was used. Quantitative gated SPECT/quantitative perfusion SPECT software was used to obtain these quantitative parameters in a semiautomatic mode. The Butterworth filter was used in FBP, with the cutoff frequencies between 0.2 and 0.8 cycles per pixel combined with the orders of 5, 10, 15, and 20. Sixty-three reconstructions were performed using 2, 4, 6, 8, 10, 12, and 16 OSEM subsets, combined with several iterations: 2, 4, 6, 8, 10, 12, 16, 32, and 64. Results: With FBP, the values of end-diastolic, end-systolic, and the stroke volumes rise as the cutoff frequency increases, whereas the value of LVEF diminishes. This same pattern is verified with the OSEM reconstruction. However, with OSEM there is a more precise estimation of the quantitative parameters, especially with the combinations 2 iterations × 10 subsets and 2 iterations × 12 subsets. Conclusion: The OSEM reconstruction presents better estimations of the quantitative parameters than does FBP. This study recommends the use of 2 iterations with 10 or 12 subsets for OSEM and a cutoff frequency of 0.5 cycles per pixel with the orders 5, 10, or 15 for FBP as the best estimations for the left ventricular volumes and ejection fraction quantification in myocardial perfusion scintigraphy.
Resumo:
Considering ancient monuments and historical buildings, it seems that these mortars have proved to be durable and reliable materials. The restoration and maintenance of old renders is one of the key aspects of correct rehabilitation practice. The ideal course of action is to replace the damaged material by a material with compatible characteristics.The study in development presents the chemical, physical and morphologic analysis performed for ancient air lime mortars belonging to historical monuments: Santa Marta Fortress in the coast line Lisbon-Cascais dated from XVII century and Defense Wall of Lisbon dated from XI century, which layout could be associated to roman period. It is important to underline that the studied samples of ancient portuguese air lime mortars, have been submitted during centuries to very severe maritime environment that includes daily cycles of wet/dry, wind, friction and the constant presence of salts, generally aggressive. However, they show very good performance and conservation state, unlike most of the new air lime mortars, which are generally considered weak, not very durable, materials. This work is included in a study intending to determine key factors to the durability of these ancient materials in presence of water. Visible reaction rims around some aggregates suggests the occurrence of pozzolanic reactions between aggregates and the lime binder that creates neoformation products, such as calcium-silico-aluminates, which seems be, besides the pores filling, the responsible for the resistance and cohesion of these ancient mortars submitted to aggressive humid environments.
Resumo:
A copper(II) chiral aza-bis(oxazoline) homogeneous catalyst (CuazaBox) was anchored onto the external surface of MCM-22 and ITQ-2 structures, as well as encapsulated into hierarchical MCM-22. The transition metal complex loading onto the porous solids was determined by ICP-AES and the materials were also characterized by elemental analysis (C, N, H, S), FTIR, XPS, TG and low temperature N-2 adsorption isotherms. The materials were tested as heterogeneous catalysts in the benchmark reaction of cyclopropanation of styrene to check the effect of the immobilization procedure on the catalytic parameters, as well as on their reutilization in several catalytic cycles. Catalyst CuazaBox anchored onto the external surface of MCM-22 and ITQ-2 materials were more active and enantioselective in the cyclopropanation of styrene than the corresponding homogeneous phase reaction run under similar experimental conditions. This is due to the propylation of the acidic aza-Box nitrogen. HMCM-22 was nevertheless the best heterogeneous catalyst. Encapsulation of CuazaBox on post-synthesis modified MCM-22 materials led to low activities and enantioselectivities. But reversal on the stereochemical course of the reaction was observed, probably due to confinement effect. (C) 2013 Elsevier Inc. All rights reserved.
Resumo:
As instituições de ensino procuram ser impulsionadoras de boas práticas ambientais demonstrando com isso o seu compromisso com o meio ambiente e com as gerações futuras. Os Sistemas de Gestão Ambiental (SGA), nomeadamente as exigências da ISO 14001:2004 podem ser uma oportunidade para as instituições gerirem correctamente todos os seus recursos, assim como eliminarem os riscos e custos desnecessários, ao mesmo tempo que reforçam os seus valores quanto à protecção do meio ambiente, prevenção da poluição, cumprimento legal e as necessidades socioeconómicas. Pretendeu-se com este estudo determinar quais os factores que condicionam a abordagem de uma política ambiental nos estabelecimentos de ensino, relacionando-as com as diferentes características das escolas com as suas abordagens ambientais, assim como determinar quais os factores que influenciam a postura ambiental das escolas. Os resultados foram recolhidos através de um inquérito por questionário, direccionado para os estabelecimentos de ensino pré-escolar, 1º, 2º, 3º ciclos e secundário da Área Metropolitana do Porto. Através da análise das respostas de 405 escolas, conclui-se que aqueles com melhores desempenhos ambientais e melhores condições para implementar um SGA são os estabelecimentos de ensino com a tipologia EB2,3/ES, públicos, pertencentes aos concelhos de Gondomar, Mais e Sto Tirso, localizados nas zonas urbanas e com edifícios escolares recentes em excelentes ou bons estados de conservação. De um modo geral todos os estabelecimentos de ensino demonstram um desempenho ambiental considerado bom e acima do considerado satisfatório para a implementação de um SGA.
Resumo:
Introdução: O declínio do equilíbrio, da força dos membros inferiores e o medo de cair são fatores de risco de queda associados ao envelhecimento e a sua avaliação pode ser realizada pelo teste One Leg Standing (OLS), Sit to Stand (STS) e pela Falls Eficacy Scale (FES), respetivamente. As aplicações para smartphone constituem uma alternativa para a avaliação dos fatores de risco de queda no envelhecimento. Objetivo: Analisar a capacidade de uma aplicação para smartphone na avaliação dos testes STS, OLS e FES. Metodologia: Realizou-se um estudo analítico numa amostra de 27 voluntários com idade ≥ 60 anos. Realizaram-se os testes STS, OLS e a FES (versão iconográfica, apresentada no smartphone). Os dados foram recolhidos simultaneamente por um smartphone e pelo Qualisys Motion Capture Systems associado a uma plataforma de forças. Foi utilizado o r de Pearson ou Spearman para analisar as possíveis correlações. Resultados: No STS obteve-se uma correlação muito forte (rp=0.97) no número de repetições de ciclos Sit Stand Sit (SLS) e forte na duração média do SLS (rp=0.85) e das subfases Sit to Stand (rp=0.69) e Stand to Sit (rp=0.778), com p<0.001. As medidas de inclinação do tronco apresentaram correlações fortes, com exceção do ângulo inicial (p≥0.05). No OLS, verificou-se uma correlação moderada entre o deslocamento do centro de pressão peak to peak médio-lateral (rs=0.45; p=0.017) e antero-posterior (rs=0.39; p=0.046), root mean square médio-lateral (rs=0.39; p=0.046) e antero-posterior (rs=0.46; p=0.017) e área do estatocinesiograma (rs=0.45; p=0.018). Na FES obteve-se uma correlação moderada em três categorias: ‘tomar banho/duche’ (rs=0.49; p=0.010), ‘deitar/levantar da cama (rs=0.43; p=0.024) e ‘chegar aos armários’ (rs=0.38; p=0.050). Conclusão: A aplicação para smartphone parece avaliar corretamente os ciclos e a variação da inclinação do tronco no STS, porém parece necessitar de ser reajustada na FES e na velocidade do deslocamento do centro de pressão, no OLS.
Resumo:
Conference: IMMR | International Meeting on Marine Research 2014. Peniche, Portugal, 10 Jul - 11 Jul, 2014. Presentation Type: Poster Presentation.