Gradation Analysis of Cold Feed and Extracted Bituminuous Mix Samples, MLR-88-2, 1988

Since 1987, the Iowa Department of Transportation has based control of hot asphalt concrete mixes on cold feed gradations. This report presents results of comparisons between cold feed gradations and gradations of aggregate from the same material after it has been processed through the plant and laydown machine. Results are categorized based on mix type, plant type, and method of dust control, in an effort to quantify and identify the factors contributing to those changes. Results of the report are: 1. From the 390 sample comparisons made, aggregate degradation due to asphalt plant processing was demonstrated by an average increase of +0.7% passing the #200 sieve and an average increase in surface area of +1.8 sq. ft. per pound of aggregate. 2. Categories with Type A Mix or Recycling as a sorting criteria generally produced greater degradation than categories containing Type B Mixes and/or plants with scrubbers. 3. None of the averages calculated for the categories should be considered unacceptably high, however, it is information that should be considered when making mix changes in the field, selecting asphalt contents for borderline mix designs, or when evaluating potential mix gradation specification or design criteria changes.

Evaluation of Long-Term Field Performance of Cold In-Place Recycled Roads: Field Distress Survey, TR-502, 2007

Cold in-place recycling (CIR) has become an attractive method for rehabilitating asphalt roads that have good subgrade support and are suffering distress related to non-structural aging and cracking of the pavement layer. Although CIR is widely used, its use could be expanded if its performance were more predictable. Transportation officials have observed roads that were recycled under similar circumstances perform very differently for no clear reason. Moreover, a rational mix design has not yet been developed, design assumptions regarding the structural support of the CIR layer remain empirical and conservative, and there is no clear understanding of the cause-effect relationships between the choices made during the design/construction process and the resulting performance. The objective of this project is to investigate these relationships, especially concerning the age of the recycled pavement, cumulative traffic volume, support conditions, aged engineering properties of the CIR materials, and road performance. Twenty-four CIR asphalt roads constructed in Iowa from 1986 to 2004 were studied: 18 were selected from a sample of roads studied in a previous research project (HR-392), and 6 were selected from newer CIR projects constructed after 1999. This report summarizes the results of a comprehensive program of field distress surveys, field testing, and laboratory testing for these CIR asphalt roads. The results of this research can help identify changes that should be made with regard to design, material selection, and construction in order to lengthen the time between rehabilitation cycles and improve the performance and cost-effectiveness of future recycled roads.

Asphalt Cement Containing AC-13, HR-522, Construction Report, 1985

Stopping and turning maneuvers on high traffic volume asphalt cement concrete surfaced roads and streets often causes distortion of the pavement. Distortion may show up as excessive rutting in the wheel path, shoving of the pavement and/or rippling of the surface. Often times repeated corrective work such as cold milling or heater planing is required in these areas to maintain the pavement surface in a reasonable condition. In recent years polymer additives have been developed for asphalt cement concrete paving mixes that show promise in improving the inplace stability of the pavements. AC-13 (Styrelf 13) available from Bitucote Products Company, St. Louis, Missouri is an asphalt cement that has been modified by an additive to exhibit characteristics of very high stability in asphalt mixes.

The influence of work context on demand for master's studies: a comparative analysisi between Brasil and Spain

The communication presents the results of an investigation of exploratory and comparative character which objective is to analyze the influence of the actual labour situation into the demand of official master studies in the field of education. The study has been developed in two countries with a very different labour situation: Brasil, country of economic expansion and Spain, in recession due to the actual economic crisis. In that sense, the study provides data for deep thinking about the influence of the constriction or expansion of employment on the behaviour and demand of the students who access master studies and on how the previous formative and labour trajectory affects their expectations, demands and future projects. The working methodology is qualitative and the strategy for data collection the “focus group”. As a first approach, two groups of discussion have been formed with master students. A first one with students from Universidad de Barcelona- España and another one with members of Universidade do Vale do Itajaí- Brasil. Then, we constituted a mixed group of discussion in order to analyze differences and similarities.

The european higher education area at work: Lights and shadows defining continuous assessment

The aim of this paper is to analyse how learning assessment, particularly the Continuous Assessment system, has been defined in the Public Administration and Management Diploma Course of the University of Barcelona (Spain). This course was a pioneering experiment at this university in implementing the guidelines of the European Higher Education Area (EHEA), and thus represents a good case study for verifying whether one of the cornerstones of the EHEA has been accomplished with success. Using data obtained from the Teaching Plans elaborated by the lecturers of each subject, we are able to establish that the CA system has been progressively accepted to such an extent that it is now the assessment formula used by practically all of the lecturers, conforming in this way to the protocols laid down by the Faculty of Law in which this diploma course is taught. Nevertheless, we find that high dispersion exists in how Continuous Assessment is actually defined. Indeed, it seems that there is no unified view of how Continuous Assessment should be performed. This dispersion, however, seems to diminish over time and raises some questions about the advisability of agreement on criteria, considering the potential which CA has as a pedagogical tool. Moreover, we find that the Unique Assessment system, which students may also apply for, is an option chosen only by a minority, with lecturers usually defining it as merely a theoretical and/or practical test, of little innovation in relation to traditional tests.

INTERMED predicts non-return to work in an occupational rehabilitation setting for individuals with orthopaedic trauma-part 2

Introduction.- The model presented in part I (19 predictors) had good predictive values for non-return to work 2 years after vocational rehabilitation for orthopaedic trauma. However, the number of predictors is high for the detection of patients at risk in a clinic. For example, the INTERMED for itself consists of 20 questions and needs 20 minutes to be filled in. For this reason, the aim of this study was to compare the predictive value of different models for the prediction of non-return to work.Patients and methods.- In this longitudinal prospective study, the cohort consisted of 2156 included inpatients with orthopaedic trauma attending a rehabilitation hospital after a work, traffic, sport or leisure related injury. Two years after discharge, 1502 patients returned a questionnaire regarding return to work. We compared the area under the receiver-operator-characteristics curve (ROC) between different models: INTERMED total score, the 4 partial INTERMED scores, the items of the most predictive partial score; with or without confounders.Results.- The ROC for the total score of the INTERMED plus the five confounders of the of the part one (qualified work, speaking French, lesion of upper extremity, education and age) was 0.72. The sole partial INTERMED score to predict return to work was the social sub score. The ROC for the five items of the latter sub score of the INTERMED was 0.69. The ROC for the five items of the social subscale of the INTERMED combined with five predictors was 0.73. This was significantly better than the use of only the five items from INTERMED alone (delta 0.034; 95% CI 0.017 to .050). The model presented in part I (INTERMED total score plus 18 predictors) was not significantly better than the five items INTERMED social score plus five confounders.Discussion.- The use of a model with ten variables (INTERMED social five items plus five confounders) has good predictive value to detect patients not returning to work after vocational rehabilitation after orthopaedic trauma. The parsimony of this model facilitates its use in a clinic for the detection of patients at risk.

The influence of work context on demand for master's studies: a comparative analysisi between Brasil and Spain

The communication presents the results of an investigation of exploratory and comparative character which objective is to analyze the influence of the actual labour situation into the demand of official master studies in the field of education. The study has been developed in two countries with a very different labour situation: Brasil, country of economic expansion and Spain, in recession due to the actual economic crisis. In that sense, the study provides data for deep thinking about the influence of the constriction or expansion of employment on the behaviour and demand of the students who access master studies and on how the previous formative and labour trajectory affects their expectations, demands and future projects. The working methodology is qualitative and the strategy for data collection the “focus group”. As a first approach, two groups of discussion have been formed with master students. A first one with students from Universidad de Barcelona- España and another one with members of Universidade do Vale do Itajaí- Brasil. Then, we constituted a mixed group of discussion in order to analyze differences and similarities.

¿Y después del trabajo, qué? Más allá de la integración laboral de las personas con discapacidad = What happens after work? Going further than labour integration for disabled people

La actividad profesional es fundamental en la vida de cualquier persona y en el caso de las que padecen una discapacidad tiene una gran importancia para contribuir a configurar su identidad adulta. En este sentido, la finalidad del artículo es valorar la importancia del trabajo en los procesos de participación social y de calidad de vida de las personas con discapacidad. Por ello, en el artículo se pone de manifiesto la relación que se establece entre la dimensión laboral y la integración social de los individuos con discapacidad mediante el análisis de investigaciones desarrolladas en nuestro contexto, entre las que figuran diversos estudios realizados por nuestro grupo de investigación durante los últimos años. Con la voluntad de conocer con más detalle esta cuestión, se presenta una investigación reciente realizada por nuestro equipo. En ella desarrollamos un estudio de casos centrado en personas con discapacidad psíquica que han participado en experiencias de integración laboral en el mercado ordinario, con el objetivo de obtener información sobre la incidencia de la inserción laboral en diferentes dimensiones de la vida de los trabajadores con discapacidad. Los resultados nos permiten valorar que la experiencia genera cambios positivos, sobre todo a nivel personal (expectativas personales, potenciación del proyecto de vida, mejora de competencias…). Sin embargo, a pesar de que se aprecian mejoras en la dimensión social, el estudio plantea la necesidad de emprender acciones alternativas para potenciar la participación comunitaria de las personas implicadas en la investigación. El artículo concluye con algunas propuestas orientadas a mejorar los procesos de inserción social del colectivo

Effects of three harvesting work methods on Harwarder productivity in final felling

Abstract

Real-time monitoring of the silicidation process of tungsten filaments at high temperature used as catalysers for silane decomposition

The scope of this work is the systematic study of the silicidation process affecting tungsten filaments at high temperature (1900ºC) used for silane decomposition in the hot-wire chemical vapour deposition technique (HWCVD). The correlation between the electrical resistance evolution of the filaments, Rfil(t), and the different stages of the their silicidation process is exposed. Said stages correspond to: the rapid formation of two WSi2 fronts at the cold ends of the filaments and their further propagation towards the middle of the filaments; and, regarding the hot central portion of the filaments: a initial stage of silicon dissolution into the tungsten bulk, with a random duration for as-manufactured filaments, followed by the inhomogeneous nucleation of W5Si3 (which is later replaced by WSi2) and its further growth towards the filaments core. An electrical model is used to obtain real-time information about the current status of the filaments silicidation process by simply monitoring their Rfil(t) evolution during the HWCVD process. It is shown that implementing an annealing pre-treatment to the filaments leads to a clearly repetitive trend in the monitored Rfil(t) signatures. The influence of hydrogen dilution of silane on the filaments silicidation process is also discussed.

Gorilla genome structural variation reveals evolutionary parallelisms with chimpanzee

Structural variation has played an important role in the evolutionary restructuring of human and great ape genomes. Recent analyses have suggested that the genomes of chimpanzee and human have been particularly enriched for this form of genetic variation. Here, we set out to assess the extent of structural variation in the gorilla lineage by generating 10-fold genomic sequence coverage from a western lowland gorilla and integrating these data into a physical and cytogenetic framework of structural variation. We discovered and validated over 7665 structural changes within the gorilla lineage, including sequence resolution of inversions, deletions, duplications, and mobile element insertions. A comparison with human and other ape genomes shows that the gorilla genome has been subjected to the highest rate of segmental duplication. We show that both the gorilla and chimpanzee genomes have experienced independent yet convergent patterns of structural mutation that have not occurred in humans, including the formation of subtelomeric heterochromatic caps, the hyperexpansion of segmental duplications, and bursts of retroviral integrations. Our analysis suggests that the chimpanzee and gorilla genomes are structurally more derived than either orangutan or human genomes.

Sequencing human-gibbon breakpoints of synteny reveals mosaic new insertions at rearrangement sites

The gibbon genome exhibits extensive karyotypic diversity with an increased rate of chromosomal rearrangements during evolution. In an effort to understand the mechanistic origin and implications of these rearrangement events, we sequenced 24 synteny breakpoint regions in the white-cheeked gibbon (Nomascus leucogenys, NLE) in the form of high-quality BAC insert sequences (4.2 Mbp). While there is a significant deficit of breakpoints in genes, we identified seven human gene structures involved in signaling pathways (DEPDC4, GNG10), phospholipid metabolism (ENPP5, PLSCR2), beta-oxidation (ECH1), cellular structure and transport (HEATR4), and transcription (ZNF461), that have been disrupted in the NLE gibbon lineage. Notably, only three of these genes show the expected evolutionary signatures of pseudogenization. Sequence analysis of the breakpoints suggested both nonclassical nonhomologous end-joining (NHEJ) and replication-based mechanisms of rearrangement. A substantial number (11/24) of human-NLE gibbon breakpoints showed new insertions of gibbon-specific repeats and mosaic structures formed from disparate sequences including segmental duplications, LINE, SINE, and LTR elements. Analysis of these sites provides a model for a replication-dependent repair mechanism for double-strand breaks (DSBs) at rearrangement sites and insights into the structure and formation of primate segmental duplications at sites of genomic rearrangements during evolution.