Thioxanthone Sensitized Photodegradation of Poly(alkyl methacrylate) Films

The thioxanthone-sensitized photodegradation of poly(alkyl methacrylate) films [alkyl = methyl, ethyl, butyl, and hexyl] was studied using near UV-vis light. The photooxidation process continued even after the total consumption of the sensitizer, possibly due to the excitation of the ketyl groups formed during the first stages of the process. The rate of oxidation, as well as the formation of hydroxy, peroxy, and ketyl groups was faster for polymers with larger ester groups. The decrease of the molecular weight of the degradated polymers was also larger for the hexyl substituted polymer. The side-chain size effect was attributed to the larger amount of secondary hydrogens available for abstraction by the triplet state of thioxanthone, present in the larger ester groups. The lower glass transition temperature of the hexyl substituted polymer allows a better diffusion of oxygen to the deeper layers of the films that also contributes to the faster photodegradation rate. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 115: 1283-1288, 2010

Double stranded DNA-binding studies of potential Rhodium(ll) antitumor complexes

In 1952, Dwyer and coworkers began testing a series of metal complexes for potential inhibition of cancer cell proliferation in animals.[l] The complexes tested were unsuitable for such studies due to their high toxicity. Therefore, no further work was done on the project. However, in 1965, Rosenberg and coworkers revisited the possibility of potential metal-based drugs. Serendipitously, they discovered that cis-diamminedichloroplatinum(lI) (cisplatin) inhibits cell division in E. coli.[2] Further studies of this and other platinum compounds revealed inhibition of tumor cell lines sarcoma 180 and leukemia LI2l0 in mice.[l] Cisplatin was approved by the Food and Drug Administration in 1970 as a chemical chemotherapeutic agent in the treatment of cancer. The drug has primarily been used in the treatment of testicular and ovarian cancers, although the powerful chemotherapeutic properties of the compound indicate use against a variety of other cancers.[3] The toxicity of this compound, however, warrants the development of other metal-based potential antitumor agents. The success of cisplatin, a transition-metal-based chemotherapeutic, opened the doors to a host of research on the antitumor effects of other transition-metal complexes. Beginning in the 1970s, researchers looked to rhodium for potential use in antitumor complexes. Dirhodium complexes with bridging equatorial ligands (Figure I) were the primary focus for this research. The overwhelming majority of these complexes were dirhodium(II) carboxylate complexes, containing two rhodium(II) centers, four equatorial ligands in a lantero formation around the metal center, and an axial ligand on either end. The family of complexes in Figure 1 will be referred to as dirhodium(II) carboxylate complexes. The dirhodium centers are each d? with a metal-metal bond between them. Although d? atoms are paramagnetic, the two unpaired electrons pair to make the complex diamagnetic. The basic formula of the dirhodium(lI) carboxylate complexes is Rh?(RCOO)?(L)? with R being methyl, ethyl, propyl, or butyl groups and L being water or the solvent in which the complex was crystalized. Of these dirbodium(II) carboxylate complexes, our research focuses on Rb la and two other similar complexes Rh2 and Rh3 (Figure 2). Rh2 is an activated form of Rhla, with four acetonitrile groups in place of two of the bidentate acetate ligands. Rh3 is similar to Rhla, with trifluoromethyl groups in place of the methyl groups on the acetate ligands.

The Synthesis and Characterization of Bicyclooxacalixarenes

Bicyclooxacalixarenes were synthesized in high yield via a selective, room temperature Sn Ar reaction of phluoroglucinol with 2,6-dichloropyridines. Functionality on the 2,6-dichloropyridioe was varied by changing the electron-withdrawing groups in the 3 and 5 positions (using chlorine, nitro groups, and cyano groups) and the side-chains in the 4-position (using ethyl, butyl, phenyl and ρ-tolyl groups). The resulting cage-like molecules were studied by X-ray crystallography and tested for metal complexation.

Photochemical Generation and Intramolecular Chemistry of β-Alkoxycarbenes

The photolytic phenanthrene-based precursors for both β-methoxycarbene and β-ethoxycarbene were synthesized with and without a deuterium label attached to the a carbon. The incorporation of this deuterium label allowed distinction between a 1, 2-H shift and a 1, 2-O shift pathway to the respective alkyl vinyl ether, without the influence of a primary kinetic isotope effect. Photolyses of these precursors gave rearrangement products of the expected β-alkoxycarbenes. In the case of β-methoxycarbene, no methyl vinyl ether was observed due to its volatility. However, the appearance of aldehyde peaks in the NMR spectra, from an apparent further rearrangement to acetaldehyde through an enol intermediate, indicated that a 1,2-H shift had occurred. Ethyl vinyl ether was isolated following the photolysis of the β-ethoxycarbene precursor. Quantification of the two pathways showed less than 2% undergoing an ethoxy shift to the ethyl vinyl ether. Yield experiments on this photolysis demonstrated a maximum yield of β-ethoxycarbene as 43%, though this decreased as the experiment continued. Computational work on the β-ethoxycarbene system indicates that the triplet scate is more stable than the singlet. In addition, the activation energy to the 1.2-H shift pathway is remarkably low and is clearly consistent with the observed overwhelming preference for this pathway in the experiment.

Estudo da corrosao do aco ABNT 1010 em alcool etilico adicionado de inibidores

Estudou-se o comportamento do aço AISI 1010 em AISI 1010 em àlcool etílico puro com 3,5% H20 e diferentes aditivos (acetato de sódio, um aditivo comercial e trietanolamina) em meio arejado e desarejado, com e sem agitação. Os resultados experimentais mostram que os aditivos usados exercem efeito inibidor da corrosão no aço. A água (3,5%) origina um período de incubação até o aparecimento de pite. A reação de redução catódica do oxigênio apresenta duas ondas, o que permite dizer que a presença de algum filme modifica a mesma. Os ensaios em etanol carburante, a longo prazo, apresentaram corrosão localizada em meio arejado (a qual é evitada com adição de 10-² M de acetato de sódio), e corrosão generalizada em meio desarejado.

Corrosão de vários materiais metálicos em álcool etílico hidratado combustível e sua inibição a 25 graus C

Estudou-se o comportamento à corrosão de diversos materiais metálicos como aço, cobre, latão e pares galvânicos (aço-latão) em álcool etilico combustível (91.1 - 93.9 -INPM) adicionado de várias substâncias a fim de avaliar possíveis efeitos inibidores ou aceleradores da corrosão. Foi verificado a influência na corrosão, de ion cloreto, acetato de sódio, ácido benzóico, trietanolamina, butinodiol e um inibidor comercial. O acetato de sódio seguido do produto comercial se revelaram os melhores aditivos sob o ponto de vista da inibição da corrosão. A adição de cloreto, como um possível contaminante foi estudada e obteve-se um aumento bastante grande na taxa de corrosão. A adição de perclorato de potássio ao álcool combustível normalmente utilizado para aumentar a condutividade da solução nos ensaios eletroquímicos, mostrou ser prejudicial por modificar apreciavelmente as características do comportamento à corrosão dos materiais ensaiados, aumentando-a ou diminuindo-a conforme o caso.

A vanilina como um agente modulador da genotoxicidade : risco ou benefício?

Há cerca de 20 anos a vanilina vem sendo descrita como uma substância moduladora capaz de inibir eventos relacionados à indução e promoção do processo carcinogênico. Este comportamento associado ao seu consumo elevado despertou o nosso interesse científico - resultando na publicação do primeiro trabalho associando a VA a acréscimos expressivos em eventos recombinacionais mitóticos, acompanhados de decréscimos na freqüência de mutações pontuais e cromossômicas. Entretanto, quando a antimutagênese e a co-recombinogênese foram avaliadas simultaneamente, a ação final da VA refletiu-se não como proteção, mas sim como um efeito potencializador expresso como um aumento de cerca de 200 vezes na genotoxicidade total da MMC. Na procura de respostas adicionais concernentes à ação da VA como moduladora de diferentes espectros de lesões no DNA utilizamos o Teste para Detecção de Mutação e Recombinação Somática em Drosophila melanogaster (SMART) com o intuito de avaliar o comportamento deste flavorizante em relação à genotoxicidade dos agentes químicos: N-methyl-N-nitrosourea (MNU), N-ethyl-N-nitrosourea (ENU), ethylmethanesulphonate (EMS) e bleomicina (BLEO), em dois protocolos de administração do modulador – pós e co-tratamento. Pós-tratamento Os dados obtidos através do sistema de pós-tratamento evidenciaram que a VA não altera a mutagenicidade e a recombinogenicidade do ENU e MNU - o que sugere a não interferência deste flavorizante sobre os mecanismos envolvidos na correção das lesões induzidas por estes alquilantes. Ao contrário, a toxicidade genética do EMS foi significativamente aumentada em valores compreendidos entre 7,79 a 29,79%, representando a expressão final de dois efeitos antagônicos: (i) sinergismo em recombinação mitótica e (ii) proteção em relação à mutagênese. Tais achados sugerem que diferenças entre o espectro dos danos induzidos por estes agentes alquilantes, podem afetar os caminhos de reparação a serem priorizados. Como conseqüência, o efeito potencializador da VA sobre recombinação homóloga (HR) está restrito ao EMS – o único dos agentes alquilantes monofuncionais estudados cujas lesões são processadas, em Drosophila melanogaster, por ambos mecanismos de reparo: excisão de nucleotídeos e pós-replicativo. A VA também causou drásticos incrementos na genotoxicidade da BLEO - 120 a 178% - que estão limitados a aumentos em recombinação, uma vez que não foram observadas alterações na sua potência mutacional. Como a genotoxicidade da BLEO resulta basicamente da indução de quebras duplas corrigidas por mecanismos de reparação dependentes de recombinação - que podem ocorrer tanto entre cromossomos homólogos (HR) como não-homólogos (end joining -NHEJ) – e como o teste SMART privilegia a detecção de recombinação homóloga, os nossos dados indicam que a ação potencializadora de VA em relação a BLEO deve-se especificamente a incrementos em reparo dependente de HR. Ainda relevante é o fato de que estes acréscimos não estão associados a decréscimos em mutação, como anteriormente observado para a MMC.Todos estes dados indicam que a modulação da VA está restrita ao seu efeito sinérgico sobre recombinação somática – promovendo especificamente a recombinação homóloga em células proliferativas de Drosophila. Co-tratamento Através deste procedimento ficou claro que a VA diminui significativamente a toxicidade genética total dos alquilantes MNU e ENU e do agente intercalante bleomicina. Os decréscimos observados tanto para o MNU quanto para o ENU são basicamente atribuídos ao seu papel promotor sobre o processo de detoxificação - que leva a diminuição no número de metilações e etilações induzidas respectivamente pelo MNU e pelo ENU. Adicionalmente, a caracterização da VA como um potente captador de radicais livres, especialmente em função do seu efeito sobre os danos oxidativos induzidos pela BLEO – explica a sua ação desmutagênica em relação a este agente intercalante. Todos estes dados referentes ao efeito modulador da VA não permitem a quantificação da relação risco-benefício do seu consumo, especialmente pela dificuldade prática de se medir o quanto a sua presença concomitante com as genotoxinas – representado por efeito benéfico, via interferência no potencial genotóxico – ou a sua ação após a indução dos danos genéticos, através da promoção de reparo recombinacional e conseqüente aumento em HR, contribuem para a expressão final do seu efeito modulador. Entretanto, o papel fundamental da recombinação homóloga na gênese de inúmeras doenças genéticas, incluindo o câncer, e a preponderante ação recombinogênica da VA são um sinal de alerta.

Produção de acetato de etila em biorrefinaria: uma análise de viabilidade

O estudo aqui apresentado tem como objetivo mostrar que a competitividade da indústria química brasileira pode ser revista por meio do desenvolvimento da área química a partir dos recursos naturais renováveis e de alto desempenho de produtividade, aqui representado pela cana-de-açúcar. A base deste estudo analisa a competitividade econômica da produção do acetato de etila, utilizando o etanol como única matéria-prima, sendo o Brasil um grande exportador e, ao mesmo tempo, detentor de um mercado interno forte quando comparado a outros países desenvolvidos. O acetato de etila exportado representou 52% da capacidade nominal instalada no Brasil no ano de 2008. No Brasil existem três ofertantes, mas apenas um produtor é exportador. Todos usam a esterificação como tecnologia de produção, via reação do ácido acético e etanol, sendo o ácido acético largamente importado. O estudo tem como premissa que a competitividade do acetato de etila no Brasil seja dada pelo etanol, que aqui é produzido pela fermentação do caldo de cana-de-açúcar. Já a tecnologia de esterificação é conhecida e de domínio público mundial, e o ácido acético é uma commodity petroquímica com preço referenciado globalmente. Argumenta-se neste trabalho que a competitividade do acetato de etila decorre da linkage com a produção de etanol de cana-de-açúcar, o que coloca o Brasil como grande potencial exportador desse produto. Utilizando a tecnologia de desidrogenação do etanol, pode-se obter acetato de etila utilizando-se apenas o etanol como matéria-prima, reduzindo-se assim a necessidade de importação de ácido acético, que representaria redução anual do déficit da balança comercial petroquímica brasileira em aproximadamente meio bilhão de dólares e, ademais, permitindo que o acetato de etila produzido no Brasil seja ainda mais competitivo. A partir deste estudo é possível avaliar, por analogia, a competitividade de outros produtos químicos produzidos a partir da matriz cana-de-açúcar, tais como eteno, lubrificantes, plásticos etc. Tal caminho permite criar um novo marco para a indústria química brasileira, com consequente redução da dependência de petróleo e gás natural.

Novel catalyst systems based on Ni(II), Ti(IV), and Cr(III) complexes for oligo-and polymerization of ethylene

The complex of Brookhart Ni(α-diimine)Cl2 (1) (α-diimine = 1,4-bis(2,6- diisopropylphenyl)-acenaphthenediimine) has been characterized after impregnation on silica (S1) and MAO-modified silicas (4.0, 8.0 and 23.0 wts.% Al/SiO2 called S2, S3 and S4, respectively). The treatment of these heterogeneous systems with MAO produces some active catalysts for the polymerization of the ethylene. A high catalytic activity has been gotten while using the system supported 1/S3 (196 kg of PE/mol[Ni].h.atm; toluene, Al/Ni = 1000, 30ºC, 60 min and atmospheric pressure of ethylene). The effects of polymerization conditions have been tested with the catalyst supported in S2 and the best catalytic activity has been gotten with solvent hexane, MAO as cocatalyst, molar ratio Al/Ni of 1000 and to the temperature of 30°C (285 kg of PE/mol[Ni].h.atm). When the reaction has been driven according to the in situ methodology, the activity practically doubled and polymers showed some similar properties. Polymers products by the supported catalysts showed the absence of melting fusion, results similar to those gotten with the homogeneous systems by DSC analysis. But then, polymers gotten with the transplanted system present according to the GPC’s curves the polydispersity (MwD) varies between 1.7 and 7.0. A polyethylene blend (BPE/LPE) was prepared using the complex Ni(α-diimine)Cl2 (1) (α-diimine = 1,4-bis(2,6-diisopropylphenyl)-acenaphthenediimine) and {TpMs*}TiCl3 (2) (TpMs* = hydridobis(3-mesitylpyrazol-1-yl)(5-mesitylpyrazol-1-yl)) supported in situ on MAO-modified silica (4.0 wts. -% Al/SiO2, S2). Reactions of polymerization of ethylene have been executed in the toluene in two different temperatures (0 and 30°C), varying the molars fraction of nickel (xNi), and using MAO as external cocatalyst. To all temperatures, the activities show a linear variation tendency with xNi and indicate the absence of the effect synergic between the species of nickel and the titanium. The maximum of activity have been found at 0°C. The melting temperature for the blends of polyethylene produced at 0 °C decrease whereas xNi increases indicating a good compatibility between phases of the polyethylene gotten with the two catalysts. The melting temperature for the blends of polyethylene showed be depend on the order according to which catalysts have been supported on the MAO-modified silica. The initial immobilization of 1 on the support (2/1/S2) product of polymers with a melting temperature (Tm) lower to the one of the polymer gotten when the titanium has been supported inicially (1/2/S2). The observation of polyethylenes gotten with the two systems (2/1/S2 and 1/2/S2) by scanning electron microscopy (SEM) showed the spherical polymer formation showing that the spherical morphology of the support to been reproduced. Are described the synthesis, the characterization and the catalytic properties for the oligomerization of the ethylene of four organometallics compounds of CrIII with ligands ([bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine] chromium (III) chloride (3a), [bis[2-(3,5- dimethyl-l-pyrazolyl)ethyl]benzylamine] chromium (III) chloride (3b), [bis[2-(3,5-dimethyl-lpyrazolyl) ethyl]ether] chromiun(III)chloride (3c), [bis[2-(3-phenyl-lpyrazolyl) ethyl]ether]chromiun(III)chloride (3d)). In relation of the oligomerization, at exception made of the compounds 3a, all complex of the chromium showed be active after activation with MAO and the TOF gotten have one effect differentiated to those formed with CrCl3(thf)3. The coordination of a tridentate ligand on the metallic center doesn't provoke any considerable changes on the formation of the C4 and C6, but the amount of C8 are decrease and the C10 and C12+ have increased. The Polymers produced by the catalyst 3a to 3 and 20 bar of ethylene have, according to analyses by DSC, the temperatures of fusion of 133,8 and 136ºC respectively. It indicates that in the two cases the production of high density polyethylene. The molar mass, gotten by GPC, is 46647 g/mols with MwD = 2,4 (3 bar). The system 3c/MAO showed values of TOF, activity and selectivity to different α-olefins according to the pressure of ethylene uses. Himself that shown a big sensibility to the concentration of ethylene solubilized.

Olfactory perception threshold assessment of volatile acidity in Madeira wines

Madeira wine is a fortified wine with impact in the Madeira Island’s economy. Similarly to other wines, its acidity should be well controlled in order to ensure Madeira wine quality, mostly the volatile acidity. Due to Madeira wine complex flavour, it is crucial to get a better knowledge about the volatile acidity impact in its features, namely determine the perception limit of acetic acid and ethyl acetate, as both are the main contributors for volatile acidity. Firstly, the olfactory perception threshold of volatile acidity was assessed by a trained and an untrained panel, using 5 and 10 years-old Sercial and Malvasia wines. Moreover, the current work also presents the evolution of organic acids, acetic acid and ethyl acetate during 540 days of ageing of Madeira wines (Malvasia, Bual, Verdelho and Sercial), comparing the same wines aged by both traditional ageing processes: canteiro and estufagem. Other wine samples, aged in wood casks (canteiro) for at least 5 years, were also evaluated. HS-SPME followed by GC-MS analysis was used to determine ethyl acetate concentration and IEC-HPLC-DAD was used for the organic acids determination, including acetic acid. The results indicated that acetic acid and ethyl acetate olfactory perception threshold depends essentially on wine’s age. Concerning acetic acid, the untrained panel was in average 5.45 g/L (5 years-old) and 6.22 g/L (10 years-old). Training the expert panel to recognize acetic acid odour, the values decreased for 1.44 g/L (5 years-old) and 1.87 g/L (10 years-old), but still remained higher than the established volatile acidity legal limits. Ethyl acetate threshold was similar for both panels (in average 327.97 mg/L). Both compounds tend to increase exponentially with age, being more evident in sweet wines. Organic acids in young Madeira wines depend mostly on the nature of grape varieties, but this difference is minimized with wine ageing.

Comparative study of the whisky aroma profile based on headspace solid phase microextraction using different fibre coatings

A dynamic headspace solid-phase microextraction (HS-SPME) and gas chromatography coupled to ion trap mass spectrometry (GC–ITMS) method was developed and applied for the qualitative determination of the volatile compounds present in commercial whisky samples which alcoholic content was previously adjusted to 13% (v/v). Headspace SPME experimental conditions, such as fibre coating, extraction temperature and extraction time, were optimized in order to improve the extraction process. Five different SPME fibres were used in this study, namely, poly(dimethylsiloxane)(PDMS),poly(acrylate)(PA),Carboxen-poly(dimethylsiloxane)(CAR/PDMS),Carbowax-divinylbenzene(CW/DVB)and Carboxen-poly(dimethylsiloxane)-divinylbenzene (CAR/PDMS/DVB). The best results were obtained using a 75 m CAR/PDMS fibre during headspace extraction at 40◦C with stirring at 750rpm for 60min, after saturating the samples with salt. The optimised methodology was then appliedtoinvestigatethevolatilecompositionprofileofthreeScotchwhiskysamples—BlackLabel,BallantinesandHighlandClan.Approximately seventy volatile compounds were identified in the these samples, pertaining at several chemical groups, mainly fatty acids ethyl esters, higher alcohols, fatty acids, carbonyl compounds, monoterpenols, C13 norisoprenoids and some volatile phenols. The ethyl esters form an essential group of aroma components in whisky, to which they confer a pleasant aroma, with “fruity” odours. Qualitatively, the isoamyl acetate, with “banana” aroma,wasthemostinteresting.Quantitatively,significantcomponentsareethylestersofcaprilic,capricandlauricacids.Thehighestconcentration of fatty acids, were observed for caprilic and capric acids. From the higher alcohols the fusel oils (3-methylbutan-1-ol and 2.phenyletanol) are the most important ones.

Screening of volatile composition from portuguese multifloral honeys using headspace solid-phase microextraction-gas chromatography–quadrupole mass spectrometry

The volatile composition from four types of multifloral Portuguese (produced in Madeira Island) honeys was investigated by a suitable analytical procedure based on dynamic headspace solid-phase microextraction (HS-SPME) followed by thermal desorption gas chromatography–quadrupole mass spectrometry detection (GC–qMS). The performance of five commercially available SPME fibres: 100 μm polydimethylsiloxane, PDMS; 85 μm polyacrylate, PA; 50/30 μm divinylbenzene/carboxen on polydimethylsiloxane, DVB/CAR/PDMS (StableFlex); 75 μm carboxen/polydimethylsiloxane, CAR/PDMS, and 65 μm carbowax/divinylbenzene, CW/DVB; were evaluated and compared. The highest amounts of extract, in terms of the maximum signal obtained for the total volatile composition, were obtained with a DVB/CAR/PDMS coating fibre at 60 °C during an extraction time of 40 min with a constant stirring at 750 rpm, after saturating the sample with NaCl (30%). Using this methodology more than one hundred volatile compounds, belonging to different biosynthetic pathways were identified, including monoterpenols, C13-norisoprenoids, sesquiterpenes, higher alcohols, ethyl esters and fatty acids. The main components of the HS-SPME samples of honey were in average ethanol, hotrienol, benzeneacetaldehyde, furfural, trans-linalool oxide and 1,3-dihydroxy-2-propanone.

Comparison of two extraction methods for evaluation of volatile constituents patterns in commercial whiskeys: Elucidation of the main odour-active compounds

An analytical procedure based on manual dynamic headspace solid-phase microextraction (HS-SPME) method and the conventional extraction method by liquid–liquid extraction (LLE), were compared for their effectiveness in the extraction and quantification of volatile compounds from commercial whiskey samples. Seven extraction solvents covering a wide range of polarities and two SPME fibres coatings, has been evaluated. The highest amounts extracted, were achieved using dichloromethane (CH2Cl2) by LLE method (LLECH2Cl2)(LLECH2Cl2) and using a CAR/PDMS fibre (SPMECAR/PDMS) in HS-SPME. Each method was used to determine the responses of 25 analytes from whiskeys and calibration standards, in order to provide sensitivity comparisons between the two methods. Calibration curves were established in a synthetic whiskey and linear correlation coefficient (r ) were greater than 0.9929 for LLECH2Cl2LLECH2Cl2 and 0.9935 for SPMECAR/PDMS, for all target compounds. Recoveries greater than 80% were achieved. For most compounds, precision (expressed by relative standard deviation, R.S.D.) are very good, with R.S.D. values lower than 14.78% for HS-SPME method and than 19.42% for LLE method. The detection limits ranged from 0.13 to 19.03 μg L−1 for SPME procedure and from 0.50 to 12.48 μg L−1 for LLE. A tentative study to estimate the contribution of a specific compound to the aroma of a whiskey, on the basis of their odour activity values (OAV) was made. Ethyl octanoate followed by isoamyl acetate and isobutyl alcohol, were found the most potent odour-active compounds.

Changes in volatile composition of Madeira wines during their oxidative ageing

The influence of the age in the volatile composition of Madeira wines made with Boal, Malvazia, Sercial and Verdelho varieties and aged in oak barrel during 1, 11 and 25 years old was been studied. For this purpose, the evolution of volatile compounds: higher alcohols, ethyl esters, fatty acids, furan compounds, enolic compounds, γ-lactones, dioxanes and dioxolanes, of the four most utilised varieties were determined using liquid–liquid extraction with dichloromeihane. Octan-3-ol was used as internal standard. The wines made with these varieties showed great differences in sugar content and small variations on pH and alcoholic degree. The results show that during ageing, the concentration of fatty acids ethyl esters, acetates and fatty acids decrease significantly contrarily to the great increase of ethyl esters of diprotic acids. There is a strong correlation between sotolon, 2-furfural, 5-methyl-2-furfural, 5-hydroxymethyl-2-furfural and 5-ethoxymethyl-2-furfural with wine ageing. These findings indicate that these compounds can be used as ageing wine markers. Among the molecules studied, sotolon [3-hydroxy-4,5-dimethyl-2(5H)-furanone] was one of the few molecules present in concentrations above the perception threshold in Madeira wines. 5-Eihoxymethyl-2-furfural formed from 5-hydroxymethyl-2-furfural and 2-furfural, derived from sugars, are also involved in the aroma of sweet fortified white wines aged in oxidative conditions. The sensory properties change significantly after long periods of conservation.

Analytical characterization of the aroma of Tinta Negra Mole red wine: Identification of the main odorants compounds

A method for the simultaneous determination of major and minor volatiles composition in different types (dry, medium dry, sweet and medium sweet) of a young Tinta Negra Mole (TNM) monovarietal red wine from 2003 harvest has been validated. Wine samples preparation includes a dichloromethane liquid–liquid extraction followed by concentration under a nitrogen atmosphere. The extracted fraction was analysed by gas chromatography–mass spectrometry and give quantitative information for more than 86 analytes whose concentration range from few μg l−1 to 259.1 mg l−1. The method enables high recovery of volatile compounds in wine good linearity with (r2) values higher than 0.980 and good sensitivity. The limits of detection range from 0.003 to 0.534 mg l−1 and limits of quantification from 0.009 to 1.170 mg l−1. The method allows satisfactory determination of more than 80 compounds in the TNM red wines. These wines are characterized by a high content of higher alcohols, ethyl esters, fatty acids and lactones. The levels of sulphur compounds in Tinta Negra Mole medium sweet wines are very low, but they have the highest concentration of carbonyl compounds. Quantitative analysis of the main odorants followed by the determination of aroma index allow us elucidate the aroma of these varieties. On the basis of their odour description and odour threshold, the most powerful odorants of Tinta Negra Mole wines were tentatively established.