Regulação e concorrência no transporte ferroviário: um estudo das experiências brasileira e alemã

Este estudo aborda, à luz da teoria econômica e jurídica, o modelo institucional do transporte ferroviário de cargas no Brasil, no que concerne às formas de concorrência intramodal adotadas pela regulação setorial. Atualmente prima-se pelo tráfego mútuo como regra e o direito de passagem de forma subsidiária, entretanto, há um movimento em direção à desverticalização do sistema. Dessa forma, o trabalho recorre à experiência alemã de desverticalização do setor ferroviário, para fins de aprendizado. Discute, ainda, o atual estágio do modelo de segmentação setorial proposto pelo governo federal brasileiro, delineando algumas considerações críticas.

Opções reais em projetos de investimentos: o caso de uma planta de liquefação de gás natural com flexibilidade de troca de mercado e de troca de produto

O objetivo deste trabalho é revisar os principais aspectos teóricos para a aplicação de Opções Reais em avaliação de projetos de investimento e analisar, sob esta metodologia, um caso real de projeto para investir na construção de uma Planta de Liquefação de gás natural. O estudo do caso real considerou a Opção de Troca de Mercado, ao avaliar a possibilidade de colocação de cargas spot de GNL em diferentes mercados internacionais e a Opção de Troca de Produto, devido à flexibilidade gerencial de não liquefazer o gás natural, deixando de comercializar GNL no mercado internacional e passando a vender gás natural seco no mercado doméstico. Para a valoração das Opções Reais foi verificado, através da série histórica dos preços de gás natural, que o Movimento Geométrico Browniano não é rejeitado e foram utilizadas simulações de Monte Carlo do processo estocástico neutro ao risco dos preços. O valor da Opção de Troca de Mercado fez o projeto estudado mais que dobrar de valor, sendo reduzido com o aumento da correlação dos preços. Por outro lado, o valor da Opção de Troca de Produto é menos relevante, mas também pode atingir valores significativos com o incremento de sua volatilidade. Ao combinar as duas opções simultaneamente, foi verificado que as mesmas não são diretamente aditivas e que o efeito do incremento da correlação dos preços, ao contrário do que ocorre na Opção de Troca de Mercado, é inverso na Opção de Troca de Produto, ou seja, o derivativo aumenta de valor com uma maior correlação, apesar do valor total das opções integradas diminuir.

Competição de impostos sobre serviços entre municípios brasileiros

Atualmente, uma das fontes de funding dos municípios brasileiros são os tributos pagos pelas empresas do setor de serviços e profissionais autônomos prestadores de serviços tributáveis. Estes tributos recolhidos são consolidados e disponibilizados em base de dados pela RAIS – Relatório Anual de Informações Sociais. A partir deste e juntamente com indicadores sócio demográficos, é possível analisar concentrações, tendências e uma possível guerra fiscal entre os municípios brasileiros. Este trabalho objetiva-se em verificar a existência de uma competição de taxas, migração de empresas e emancipação de municípios brasileiros. Desta forma foram desenvolvidos três modelos fundamentais. O primeiro consiste em verificar o tax competition nos municípios brasileiros, ou seja, visa analisar se há influência do imposto sobre serviço (ISS) dos municípios vizinhos no município em questão. O segundo aborda a migração de empresas, segundo a metodologia race to the bottom, estudando o comportamento das empresas em relação a benefícios fiscais. Por fim, o último modelo aborda a emancipação de municípios, analisando se municípios com altas cargas tributárias de ISS, em relação a seus vizinhos, se dividem em dois ou mais municípios, equalizando toda a região. Os resultados indicam a existência de tax competition nos municípios brasileiros e probabilidade considerável de emancipação de municípios com relação aos impostos sobre serviços dos municípios vizinhos. Porém, segundo os resultados obtidos, não é possível afirmar que existe migração de empresas devido a benefícios fiscais.

Otimização de microprodução em redes inteligentes de energia

As energias renováveis têm-se tornado uma alternativa viável e complementar aos combustíveis fósseis, pelo facto de serem energias virtualmente inesgotáveis, limpas e economicamente vantajosas. Um dos principais problemas associados às fontes de energia renováveis é a sua intermitência. Este problema impossibilita o controlo da produção de energia e reflete-se na qualidade da energia elétrica. Em sistemas de microprodução de energia, este problema pode ser atenuado com a inclusão de sistemas de armazenamento intermédio que possibilitam o armazenamento do excedente extraído das fontes renováveis, podendo ser utilizado como recurso auxiliar na alimentação de cargas ou como meio de estabilização e otimização do desempenho da Rede Elétrica de Energia (REE), evitando variações bruscas na energia transferida para a mesma. Os sistemas de microprodução com armazenamento intermédio podem ser considerados fundamentais na implementação do conceito de Rede Inteligente de Energia (RIE), visto serem sistemas de energia descentralizados que permitem uma melhor gestão da energia elétrica e uma consequente redução de custos. No presente trabalho desenvolveu-se um sistema de microprodução de energia renovável compatível com as fontes renováveis fotovoltaica e eólica, possuindo um banco de baterias como sistema de armazenamento intermédio. A construção deste sistema teve como principal objetivo seguir as referências de potência impostas pela RIE, independentemente das condições meteorológicas, com recurso à energia armazenada nas baterias, evitando a introdução de perturbações na REE ao nível da tensão e da frequência. Estudou-se o comportamento do sistema na ocorrência de variações bruscas da fonte renovável, perturbações na tensão da REE e introdução de cargas lineares e não lineares. Foi desenvolvido um protótipo experimental com painéis fotovoltaicos, no qual foram registados os valores de alguns parâmetros da qualidade da energia elétrica. Obteve-se uma resposta de aproximadamente 25 μs por parte das baterias para cada Watt de potência requisitado pela RIE.

A confiança interorganizacional nas compras

This research is part of the field of organizational studies, focusing on organizational purchase behavior and, specifically, trust interorganizational at the purchases. This topic is current and relevant by addressing the development of good relations between buyer-supplier that increases the exchange of information, increases the length of relationship, reduces the hierarchical controls and improves performance. Furthermore, although there is a vast literature on trust, the scientific work that deal specifically at the trust interorganizational still need further research to synthesize and validate the variables that generate this phenomenon. In this sense, this investigation is to explain the antecedents of trust interorganizational by the relationship between the variable operational performance, organizational characteristics, shared values and interpersonal relationships on purchases by manufacturing industries, in order to develop a robust literature, most consensual, that includes the current sociological and economic, considering the effect of interpersonal relationships in this phenomenon. This proposal is configured in a new vision of the antecedents of interorganizational trust, described as significant quantitative from models Morgan and Hunt (1994), Doney and Cannon (1997), Zhao and Cavusgil (2006) and Nyaga, Whipple, Lynch (2011), as well as qualitative analysis of Tacconi et al. (2011). With regard to methodological aspects, the study assumes the form of a descriptive, survey type, and causal trace theoretical and empirical. As for his nature, the investigation, explicative character, has developed a quantitative approach with the use of exploratory factor analysis and structural equation modeling SEM, with the use of IBM software SPSS Amos 18.0, using the method of maximum verisimilitude, and supported by technical bootstraping. The unit of analysis was the buyer-supplier relationship, in which the object under investigation was the supplier organization in view of the purchasing company. 237 valid questionnaires were collected among key informants, using a simple random sampling developed in manufacturing industries (SIC 10-33), located in the city of Natal and in the region of Natal. The first results of descriptive analysis demonstrate the phenomenon of interorganizational trust, in which purchasing firms believe, feel secure about the supplier. This demonstration showed high levels of intensity, predominantly among the vendors that supply the company with materials that are used directly in the production process. The exploratory and confirmatory factor analysis, performed on each variable alone, generated a set of observable and unobservable variables more consistent, giving rise to a model, that needed to be further specified. This again specify model consists of trajectories was positive, with a good fit, with a composite reliability and variance extracted satisfactory, and demonstrates convergent and discriminant validity, in which the factor loadings are significant and strong explanatory power. Given the findings that reinforce the model again specify data, suggesting a high probability that this model may be more suited for the study population, the results support the explanation that interorganizational trust depends on purchases directly from interpersonal relationships, sharing value and operating performance and indirectly of personal relationships, social networks, organizational characteristics, physical and relational aspect of performance. It is concluded that this trust can be explained by a set of interactions between these three determinants, where the focus is on interpersonal relationships, with the largest path coefficient for the factor under study

Femininos de montar - Uma etnografia sobre experiências de gênero entre drag queens

The paper presents a discussion about gender and body in the drag queens experience at Natal city (RN). From the different concepts that characterizes the identity processes on subjects who perform gender transformation (transvestites, transsexuals and female impersonators), the justification for studying the drag character is observed as a means to understand matters that are important when you take such a position. Therefore, there is a need for a linkage between the various concepts responsible for this definition, in addition to considering the historical and cultural process responsible for the creation of such categories, identities and stereotypes among these individuals. In this sense it will be possible to carry out a critical analysis on the different social loads present in each representation, and understand what is at stake in the attribution of classifications and terminologies that are applied to different expressions of metamorphosis. This ethnography considers the debate from a field research conducted at LGBT social establishments and other performance spaces of these people, verifying their dynamics in these places and investigating relationships between performers, personas and characters and also backstage scene in which they participate

Revitalização urbana de centros históricos: uma revisão de contextos e propostas: a Ribeira como estudo de caso

This dissertation focuses on the theme of urban revitalization in historical centers. It starts from a survey of international and national concepts and experiences about the subject, in special, the historical center of Ribeira, in Natal, Brazil. It gives more attention to local management and it is dedicated to the study of objectives and actions developed, basically, by two segments that manage works in the district. Companhia Docas do Rio Grande do Norte aims at the economical development of the state and it implies the enlargement of capacity of loading and unloading of the harbor of Natal and the Natal city counsil aims at urban preservation and revitalization. It was analysed speeches ans projects related to Ribeira and it was discovered that Natal has done very little to revitalize its historical center in the last two dacades. It analyses what seemed, or at least, should be a conflict of interests between incompatible projects, revealing both conciliatory proceedings and connivance between the participants in decision making. The conclusion directs attentions to the threat to historical building in the city and the importance of enhancing discussion about the future of our historical sites

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration

Adição de vermiculita expandida mícron em pastas de baixa densidade para cimentação de poços de petróleo

The northeastern region of Brazil has a large number of wells producing oil using a method of secondary recovery steam injection, since the oil produced in this region is essentially viscous. This recovery method puts the cement / coating on thermal cycling, due to the difference in coefficient of thermal expansion between cement and metal coating causes the appearance of cracks at this interface, allowing the passage of the annular fluid, which is associated with serious risk socioeconomic and environmental. In view of these cracks, a correction operation is required, resulting in more costs and temporary halt of production of the well. Alternatively, the oil industry has developed technology for adding new materials in cement pastes, oil well, providing high ductility and low density in order to withstand the thermo-mechanical loads generated by the injection of water vapor. In this context, vermiculite, a clay mineral found in abundance in Brazil has been applied in its expanded form in the construction industry for the manufacture of lightweight concrete with excellent insulation and noise due to its high melting point and the presence of air in their layers lamellar. Therefore, the vermiculite is used for the purpose of providing low-density cement paste and withstand high temperatures caused by steam injection. Thus, the present study compared the default folder containing cement and water with the folders with 6%, 8% and 10% vermiculite micron conducting tests of free water, rheology and compressive strength where it obtained the concentration of 8 % with the best results. Subsequently, the selected concentration, was compared with the results recommended by the API standard tests of filtered and stability. And finally, analyzed the results from tests of specific gravity and time of thickening. Before the study we were able to make a folder with a low density that can be used in cementing oil well in order to withstand the thermo-mechanical loads generated by steam injection

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed

Processamento e caracterização de compósitos Poli(METACRILATO DE METILA)/Sílica (PMMA/SiO2)

Currently the search for new materials with properties suitable for specific applications has increased the number of researches that aim to address market needs. The poly (methyl methacrylate) (PMMA) is one of the most important polymers of the family of polyacrylates and polymethacrylates, especially for its unique optical properties and weathering resistance, and exceptional hardness and gloss. The development of polymer composites by the addition of inorganic fillers to the PMMA matrix increases the potential use of this polymer in various fields of application. The most commonly used inorganic fillers are particles of silica (SiO2), modified clays, graphite and carbon nanotubes. The main objective of this work is the development of PMMA/SiO2 composites at different concentrations of SiO2, for new applications as engineering plastics. The composites were produced by extrusion of tubular film, and obtained via solution for application to commercial PMMA plates, and also by injection molding, for improved the abrasion and scratch resistance of PMMA without compromising transparency. The effects of the addition of silica particles in the polymer matrix properties were evaluated by the maximum tensile strength, hardness, abrasion and scratch resistance, in addition to preliminary characterization by torque rheometry and melt flow rate. The results indicated that it is possible to use silica particles in a PMMA matrix, and a higher silica concentration produced an increase of the abrasion and scratch resistance, hardness, and reduced tensile strength

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property