Stochastic scheduling - A flow shop no wait application and solutions

Minimizing the makespan of a flow-shop no-wait (FSNW) schedule where the processing times are randomly distributed is an important NP-Complete Combinatorial Optimization Problem. In spite of this, it can be found only in very few papers in the literature. By considering the Start Interval Concept, this problem can be formulated, in a practical way, in function of the probability of the success in preserve FSNW constraints for all tasks execution. With this formulation, for the particular case with 3 machines, this paper presents different heuristics solutions: by integrating local optimization steps with insertion procedures and by using genetic algorithms for search the solution space. Computational results and performance evaluations are commented. Copyright (C) 1998 IFAC.

Erbium- and ytterbium-doped sol-gel SiO2-HfO2 crack-free thick films onto silica on silicon substrate

Aware of the difficulties in applying sol-gel technology on the preparation of thin films suitable for optical devices, the present paper reports on the preparation of crack-free erbium- and ytterbium-doped silica: hafnia thick films onto silica on silicon. The film was obtained using a dispersion of silica-hafnia nanoparticles into a binder solution, spin-coating, regular thermal process and rapid thermal process. The used methodology has allowed a significant increase of the film thickness. Based on the presented results good optical-quality films with the required thickness for a fiber matching single mode waveguide were obtained using the erbium- and ytterbium-activated sol-gel silica:hafnia system. The prepared film supports two transversal electric modes at 1550 nm and the difference between the transversal electric mode and the transversal magnetic mode is very small, indicating low birefringence. Photoluminescence of the I-4(13/2) -> I-4(15/2) transition of erbium ions shows a broad band centered at 1.53 mu m with full width at a half maximum of 28 nm. Up-conversion emission was carried out under different pump laser powers, and just one transition at red region was observed. (c) 2006 Elsevier B.V. All rights reserved.

Blaming the victim: Aspects of the Brazilian case

This report describes the consequences and some aspects of the origin and development of victim blaming in accident analysis, and some methods for investigating such events, with particular emphasis on the situation in Brazil. In Brazil, the spread of this practice seems to have been helped by several factors. (1) the idea that occupational accidents are simple phenomena with a limited number of causal factors linked to unsafe actions and/or conditions. In the past, the theory of accident proneness had less influence than in other countries. (2) Government regulations that stipulate the hiring of health and safety officers, production of educational material, and preventive campaigns that emphasize the role of the victim's faulty behavior in the origin of an accident. (3) Mandatory implementation of standardized models for accident investigation directed toward searching for a single cause. Usually one conclusion, expressed in terms of unsafe acts or conditions, is formulated so that whoever performs an unsafe act is responsible for the accident. (4) Lack of knowledge, as shown in Brazilian publications on occupational accidents and in the evolution of studies on the nature of accident phenomena and of strategies adopted for their prevention.

Barium titanate screen-printed thick films

Barium titanate (BT) thick films were prepared from mechanically activated powders based on BaCO(3) and TiO(2). After homogenization and milling in a high-energy vibro mill, the powders were calcined at 700 degreesC for 2 h by slow heating and cooling rates. A thick film paste was prepared by mixing BT fine powders with small amount of low temperature sintering aid and organic binder. The thick films were screen-printed on alumina substrates electroded with Ag-Pd. The BT films were sintered at 850 degreesC for 1 h. The thickness was 25-75 mum depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate were investigated by SEM Results of dielectric property measurements are also reported. (C) 2002 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Anthropotechnological analysis of industrial accidents in Brazil

The Brazilian Ministry of Labour has been attempting to modify the norms used to analyse industrial accidents in the country. For this purpose, in 1994 it tried to make compulsory use of the causal tree approach to accident analysis, an approach developed in France during the 1970s,without having previously determined whether it is suitable for use under the industrial safety conditions that prevail in most Brazilian firms. In addition, apposition from Brazilian employers has blocked the proposed changes to the norms. The present study employed anthropotechnology to analyse experimental application of the causal tree method to work-related accidents in industrial firms in the region of Botucatu, São Paulo. Three work-related accidents were examined in three industrial firms representative of local, national and multinational companies. on the basis of the accidents analysed in this study, the rationale for the use of the causal tree method in Brazil can be summarized for each type of firm as follows:the method is redundant if there is a predominance of the type of risk whose elimination or neutralization requires adoption of conventional industrial safety measures (firm representative of local enterprises); the method is worth while if the company's specific technical risks have already largely been eliminated (firm representative of national enterprises); and the method is particularly appropriate if the firm has a good safety record and the causes of accidents are primarily related to industrial organization and management (multinational enterprise).

NUMERICAL DETERMINATION OF THE ORDER OF PHASE-TRANSITIONS IN ISING SYSTEMS WITH MULTISPIN INTERACTIONS

The method of the fourth-order cumulant of Challa, Landau, and Binder is used together with the Monte Carlo histogram technique of Ferrenberg and Swendsen to study the order of the phase transitions of two-dimensional Ising systems with multispin interactions in the horizontal direction and two-body interactions in the vertical direction.

CELULOSE FIBROSA DO BAGACO DA CANA-DE-ACUCAR - AVALIACAO DA ACAO AGLUTINANTE/DESAGREGANTE EM COMPRIMIDOS CONTENDO FARMACO HIDROSSOLUVEL

In this work, a fibrous cellulose obtained from the sugar cane bagasse was analysed about its binder/disintegrating action and about its interference degree in the dissolution rate ('in vitro') of active principles, when incorporated in a compact system that has a water-soluble drug. It was used as reference drug the Lithium Carbonate, considering its solubility in water and it difficulties in the compressibility and flow rate. That cellulose was evaluated in a comparative study, involving another fibrous cellulose generally used in the tablet obtainment (Microcel 3E-200). After the experiment in methodologies of dry granulation and wet granulation, it was concluded that the analysed celluloses presents adequate binder/disintegrating efficience and they are equivalents in these aspect.

Diagnostic de securite d'une entreprise bresilienne a partir de l'analyse des accidents du travail par la methode de l'arbre des causes

We present here the results of a study of 21 work-related accidents that occurred in a Brazilian manufacturing company. The aim was to assess the safety level of the company to improve its work accident prevention policy. In the last 6 months of 1992 and 1993, all accidents resulting in 15 days' absence from work, reported for social security purposes, were analyzed using the INRS causal tree method (ADC) and a questionnaire completed on site. Potential risk factors for accidents were identified based on the specific factors highlighted by the ADC. More universal trees were also compiled for the safety assessment. Three hundred and thirty specific accident factors were recorded (man of 15.71 per accident). This is consistent with there being multiple causes of accidents rather than the assertion of Brazilian business safety departments that accidents are due to 'dangerous' or 'unsafe' behavior. Introducing the idea of culpability into accidents prevents the implementation of an appropriate information feedback process, essential for effective prevention. However, the large number of accidents related to 'material' (78%) and 'environment' (70%) indicates that working conditions are poor. This shows that the technical risks, mostly due to unsafe machinery and equipment are not being dealt with. Seventy-five potential accident factors were identified. Of these, 35% were 'organizational', a high proportion for the company studied. Improvisation occurs at all levels, particularly at the organizational level. This is, thus a major determinant for entire series of, if not most, accident situations. The poor condition of equipment also plays a major role in accidents. The effects of poor equipment on safety exacerbate the organizational shortcomings. The company's safety intervention policy should improve the management of human resources (rules designating particular workers for particular workstations; instructions for the safe operation of machines and equipment; training of operators, etc.) and introduce programs to detect risks and to improve the safety of machines and equipment. We also recommend the establishment of a program to follow the results of any preventive measures adopted.

Diagnostic de sécurité d’une entreprise brésilienne à partir de l’analyse des accidents du travail par la méthode de l’arbre des causes

We present here the results of a study of 21 work-related accidents that occurred in a Brazilian manufacturing company. The aim was to assess the safety level of the company to improve its work accident prevention policy. In the last 6 months of 1992 and 1993, all accidents resulting in 15 days' absence from work, reported for social security purposes, were analyzed using the INRS causal tree method (ADC) and a questionnaire completed on site. Potential risk factors for accidents were identified based on the specific factors highlighted by the ADC. More universal trees were also compiled for the safety assessment. Three hundred and thirty specific accident factors were recorded (mean of 15.71 per accident). This is consistent with there being multiple causes of accidents rather than the assertion of Brazilian business safety departments that accidents are due to dangerous or unsafe behavior. Introducing the idea of culpability into accidents prevents the implementation of an appropriate information feedback process, essential for effective prevention. However, the large number of accidents related to material (78%) and environment (70%) indicates that working conditions are poor. This shows that the technical risks, mostly due to unsafe machinery and equipment are not being dealt with. Seventy-five potential accident factors were identified. Of these, 35% were organizational, a high proportion for the company studied. Improvisation occurs at all levels, particularly at the organizational level. This is thus a major determinant for entire series of, if not most, accident situations. The poor condition of equipment also plays a major role in accidents. The effects of poor equipment on safety exacerbate the organizational shortcomings. The company's safety intervention policy should improve the management of human resources (rules designating particular workers for particular workstations; instructions for the safe operation of machines and equipment; training of operators, etc.) and introduce programs to detect risks and to improve the safety of machines and equipment. We also recommend the establishment of a program to follow the results of any preventive measures adopted.

Gli infortuni sul lavoro in Brasile. Studio nello Stato di San Paolo del Brasile, regione di Botucatu, utilizzando il metodo dell'albero delle cause

This paper discusses, within the prevaling Brazilian situation, the possibility of applying 'Causal Tree' (CT) method in investigating occupational accidents by safety personnel in the public health services and workers' unions. The method was developed during the seventies in France, for use by plant safety personnel. The authors used this method in Botucatu, State of Sao Paulo, Brazil, in order to investigate 40 serious occupational accidents that occurred in industrial plants during the second half of 1993, that had been registered by Social Security. In these cases, the predominance of situations in which the lack of safety measures were identified by inspection indicates that in most instances, the use of CT is unnecessary. However, the authors discuss its use by safety personnel from the public health services and workers' unions to investigate certain accidents to contribute to the knowledge base and help overcome the cultural based guilt which, in Brazil, has turned the victim into the person responsible for the accident.

Powder processing and In Vivo evaluation of a titanium porous coating implant

The processing of titanium porous coatings using powder metallurgy technique to achieve a porous structure that allows osseointegration with bone tissue was discussed. The porous microstructure exhibited micropores and interconnected macropores with size ranges that allowed bone ingrowth. The macropores in the coatings were originated from the binder evaporation while the micropore was related with the porous titanium powder and the low compaction pressure used. The in vivo evaluation indicated that osseointegration had occurred between the bone and porous material.

Search for the flavor-changing neutral current decay Bs 0 → μ+ μ- pp̄ Collisions at √s = 1.96 TeV with the DO Detector

We present the results of a search for the flavor-changing neutral current decay Bs 0 → μ+ μ-. using a data set with integrated luminosity of 240 pb-1 of pp̄ collisions at √s = 1.96 TeV collected with the D0 detector in run II of the Fermilab Tevatron collider. We find the upper limit on the branching fraction to be B(Bs 0 → μ+ π-) ≤ 5.0 × 10-7 at the 95% C.L. assuming no contributions from the decay Bd 0 → μ+ μ- in the signal region. This limit is the most stringent upper bound on the branching fraction Bs 0 → μ+ μ- to date. © 2005 The American Physical Society.

Measurement of the pp(-)-> W gamma plus X cross section at root s=1.96 TeV and WW gamma anomalous coupling limits

The WWγ triple gauge boson coupling parameters are studied using pp̄rarr; νγ+X(=e,μ) events at s=1.96 TeV. The data were collected with the D0 detector from an integrated luminosity of 162pb-1 delivered by the Fermilab Tevatron Collider. The cross section times branching fraction for pp̄→W(γ)+X→ νγ+X with ETγ>8 GeV and ΔR γ> 0.7 is 14.8±1.6(stat)±1.0(syst) ±1.0(lum)pb. The one-dimensional 95% confidence level limits on anomalous couplings are -0.88<Δκγ<0.96 and -0. 20<λγ<0.20. © 2005 The American Physical Society.

Measurement of the tt̄ production cross section in pp̄ collisions at √s = 1.96 TeV in dilepton final states

We present a measurement of the top quark pair (tt̄) production cross section in pp̄ collisions at √s=1.96 TeV using events with two charged leptons in the final state. This analysis utilizes an integrated luminosity of 224-243 pb-1 collected with the DØ detector at the Fermilab Tevatron Collider. We observe 13 events in the e+e -, eμ and μ+μ- channels with an expected background of 3.2±0.7 events. For a top quark mass of 175 GeV, we measure a tt̄ production cross section of σtt̄=8. 6-2.7 +3.2(stat)±1.1(syst)±0.6(lumi) pb, consistent with the standard model prediction. © 2005 Elsevier B.V. All rights reserved.