New symmetrical dinucleating ligand based assembly of bridged dicopper(II) and dizinc(II) centers: Synthesis, structure, spectroscopy, magnetic properties and glycoside hydrolysis

Two dinuclear copper(II) complexes Li(H2O)(3)(CH3OH)](4)Cu2Br4]Cu-2(cpdp)(mu-O2CCH3)](4)(OH)(2) (1), Cu (H2O)(4)]Cu-2(cpdp)(mu-O2CC6H5)](2)Cl-2 center dot 5H(2)O (2), and a dinuclear zinc(II) complex Zn-2(cpdp)(mu-O2CCH3)] (3) have been synthesized using pyridine and benzoate functionality based new symmetrical dinucleating ligand, N, N'-Bis2-carboxybenzomethyl]-N, N'-Bis2-pyridylmethyl]-1,3-diaminopropan-2-ol (H(3)cpdp). Complexes 1, 2 and 3 have been synthesized by carrying out reaction of the ligand H3cpdp with stoichiometric amounts of Cu-2(O2CCH3)(4)(H2O)(2)], CuCl2 center dot 2H(2)O/C6H5COONa, and Zn(CH3COO)(2)center dot 2H(2)O, respectively, in methanol in the presence of NaOH at ambient temperature. Characterizations of the complexes have been done using various analytical techniques including single crystal X-ray structure determination. The X-ray crystal structure analyses reveal that the copper(II) ions in complexes 1 and 2 are in a distorted square pyramidal geometry with Cu-Cu separation of 3.455(8) angstrom and 3.492(1)angstrom, respectively. The DFT optimized structure of complex 3 indicates that two zinc(II) ions are in a distorted square pyramidal geometry with Zn-Zn separation of 3.492(8)angstrom. UV-Vis and mass spectrometric analyses of the complexes confirm their dimeric nature in solution. Furthermore, H-1 and C-13 NMR spectroscopic investigations authenticate the integrity of complex 3 in solution. Variable-temperature (2-300 K) magnetic susceptibility measurements show the presence of antiferromagnetic interactions between the copper centers, with J = -26.0 cm(-1) and -23.9 cm(-1) ((H) over cap = -2JS(1)S(2)) in complexes 1 and 2, respectively. In addition, glycosidase-like activity of the complexes has been investigated in aqueous solution at pH similar to 10.5 by UV-Vis spectrophotometric technique using p-nitrophenyl-alpha-D-glucopyranoside (4) and p-nitrophenyl-beta-D-glucopyranoside (5) as model substrates. (C) 2015 Elsevier B.V. All rights reserved.

A low-power, low-cost soil-moisture sensor using dual-probe heat-pulse technique

This paper presents the development and testing of an integrated low-power and low-cost dual-probe heat-pulse (DPHP) soil-moisture sensor in view of the electrical power consumed and affordability in developing countries. A DPHP sensor has two probes: a heater and a temperature sensor probe spaced 3 mm apart from the heater probe. Supply voltage of 3.3V is given to the heater-coil having resistance of 33 Omega power consumption of 330 mW, which is among the lowest in this category of sensors. The heater probe is 40 mm long with 2 mm diameter and hence is stiff enough to be inserted into the soil. The parametric finite element simulation study was performed to ensure that the maximum temperature rise is between 1 degrees C and 5 degrees C for wet and dry soils, respectively. The discrepancy between the simulation and experiment is less than 3.2%. The sensor was validated with white clay and tested with red soil samples to detect volumetric water-content ranging from 0% to 30%. The sensor element is integrated with low-power electronics for amplifying the output from thermocouple sensor and TelosB mote for wireless communication. A 3.7V lithium ion battery with capacity of 1150 mAh is used to power the system. The battery is charged by a 6V and 300 mA solar cell array. Readings were taken in 30 min intervals. The life-time of DPHP sensor node is around 3.6 days. The sensor, encased in 30 mm x 20 mm x 10 mm sized box, and integrated with electronics was tested independently in two separate laboratories for validating as well as investigating the dependence of the measurement of soil-moisture on the density of the soil. The difference in the readings while repeating the experiments was found out to be less than 0.01%. Furthermore, the effect of ambient temperature on the measurement of soil-moisture is studied experimentally and computationally. (C) 2015 Elsevier B.V. All rights reserved.

Spectral characterizations and photophysical properties of one-step synthesized blue fluorescent 4 `-aryl substituted 2,2 `:6 `,2 `'-terpyridine for OLEDs application

We have synthesized a series of 4'-aryl substituted 2,2':6',2 `'-terpyridine (terpy) derivatives, namely 4'-(4-methylphenyl)-2,2':6',2 `'-terpyridine (C-1), 4'-(2-furyl)-2,2':6'2 `'-terpyridine (C-2), and 4'-(3,4,5-trimethoxyphenyl)-2,2':6',2 `'-terpyridine (C-3). The synthesized terpy compounds were characterized by elemental analyses, FTIR, NMR (H-1 and C-13), and ESI-Mass spectrometry. Photophysical, electrochemical and thermal properties of terpy compounds were systematically studied. Maximum excitation band was observed between 240 and 330 nm using UV-visible spectra, and maximum emission peaks from PL spectra were observed at 385, 405 and 440 nm for C-1, C-2 and C-3 respectively. Fluorescence lifetime (tau) of the fluorophores was found to be 035 and 1.55 ns at the excitation wavelength of 406 nm for C-1 and C-2 respectively, and tau value for C-3 was found to be 0.29 ns at the excitation wavelength of 468 nm. We noticed that the calculated values of HOMO energy levels were increased from 5.96 (C-1) to 6.08 (C-3) eV, which confirms that C-3 derivative is more electrons donating in nature. The calculated electrochemical band gaps were 2.95, 2.82 and 3.02 eV for C-1, C-2 and C-3 respectively. These blue fluorescent emitter derivatives can be used as an electron transport and electroluminescent material to design the blue fluorescent organic light emitting diode (OLED) applications. (C) 2015 Elsevier B.V: All rights reserved.

Synthesis, ABTS-Radical Scavenging Activity, and Antiproliferative and Molecular Docking Studies of Novel Pyrrolo1,2-a]quinoline Derivatives

A new 2,2-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS)-radical scavenging and antiproliferative agents of pyrrolo1,2-a]quinoline derivatives have been synthesized. An efficient method for the synthesis of 14 novel diversified pyrrolo1,2-a]quinoline derivatives has been described using 4-(1,3-dioxolan-2-yl)quinoline and different phenacyl bromides in acetone and followed by reacting with different acetylenes in dimethylformamide/K2CO3. The structure of the newly synthesized compounds was determined by infrared, H-1 NMR, C-13 NMR, mass spectrometry, and elemental analysis. The in vitro antioxidant activity revealed that among all the tested compounds 5n exhibited maximum scavenging activity with ABTS. Compound 5b has showed good antiproliferative activity as an inhibitor of epidermal growth factor receptor (EGFR) tyrosine kinase.

High-kappa TiO2 Thin Film Prepared by Sol-Gel Spin-Coating Method

High-k TiO2 thin film on p-type silicon substrate was fabricated by a combined sol-gel and spin coating method. Thus deposited titania film had anatase phase with a small grain size of 16 nm and surface roughness of congruent to 0.6 nm. The oxide capacitance (C-ox), flat band capacitance (C-FB), flat band voltage (V-FB), oxide trapped charge (Q(ot)), calculated from the high frequency (1 MHz) C-V curve were 0.47 nF, 0.16 nF, -0.91 V, 4.7x10(-12) C, respectively. As compared to the previous reports, a high dielectric constant of 94 at 1 MHz frequency was observed in the devices investigated here and an equivalent oxide thickness (EOT) was 4.1 nm. Dispersion in accumulation capacitance shows a linear relationship with AC frequencies. Leakage current density was found in acceptable limits (2.1e-5 A/cm(2) for -1 V and 5.7e-7 A/cm(2) for +1 V) for CMOS applications.

High-kappa TiO2 Thin Film Prepared by Sol-Gel Spin-Coating Method

High-k TiO2 thin film on p-type silicon substrate was fabricated by a combined sol-gel and spin coating method. Thus deposited titania film had anatase phase with a small grain size of 16 nm and surface roughness of congruent to 0.6 nm. The oxide capacitance (C-ox), flat band capacitance (C-FB), flat band voltage (V-FB), oxide trapped charge (Q(ot)), calculated from the high frequency (1 MHz) C-V curve were 0.47 nF, 0.16 nF, -0.91 V, 4.7x10(-12) C, respectively. As compared to the previous reports, a high dielectric constant of 94 at 1 MHz frequency was observed in the devices investigated here and an equivalent oxide thickness (EOT) was 4.1 nm. Dispersion in accumulation capacitance shows a linear relationship with AC frequencies. Leakage current density was found in acceptable limits (2.1e-5 A/cm(2) for -1 V and 5.7e-7 A/cm(2) for +1 V) for CMOS applications.

Low temperature solution processed high-kappa ZrO2 gate dielectrics for nanoelectonics

The high-kappa gate dielectrics, specifically amorphous films offer salient features such as exceptional mechanical flexibility, smooth surfaces and better uniformity associated with low leakage current density. In this work, similar to 35 nm thick amorphous ZrO2 films were deposited on silicon substrate at low temperature (300 degrees C, 1 h) from facile spin-coating method and characterized by various analytical techniques. The X-ray diffraction and X-ray photoelectron spectroscopy reveal the formation of amorphous phase ZrO2, while ellipsometry analysis together with the Atomic Force Microscope suggest the formation of dense film with surface roughness of 1.5 angstrom, respectively. The fabricated films were integrated in metal-oxide-semiconductor (MOS) structures to check the electrical capabilities. The oxide capacitance (C-ox), flat band capacitance (C-FB), flat band voltage (V-FB), dielectric constant (kappa) and oxide trapped charges (Q(ot)) extracted from high frequency (1 MHz) C-V curve are 186 pF, 104 pF, 0.37V, 15 and 2 x 10(-11) C, respectively. The small flat band voltage 0.37V, narrow hysteresis and very little frequency dispersion between 10 kHz-1 MHz suggest an excellent a-ZrO2/Si interface with very less trapped charges in the oxide. The films exhibit a low leakage current density 4.7 x 10(-9)A/cm(2) at 1V. In addition, the charge transport mechanism across the MOSC is analyzed and found to have a strong bias dependence. The space charge limited conduction mechanism is dominant in the high electric field region (1.3-5 V) due to the presence of traps, while the trap-supported tunneling is prevailed in the intermediate region (0.35-1.3 V). Low temperature solution processed ZrO2 thin films obtained are of high quality and find their importance as a potential dielectric layer on Si and polymer based flexible electronics. (C) 2016 Published by Elsevier B.V.

Análisis económico de tres fincas de producción bovina de doble propósito explotadas de forma intensiva y extensiva durante el período 1992-1993

El objetivo principal del estudio fue conocer el comportamiento económico de tres fincas ganaderas de Doble Propósito; dos de ellas, ubicadas en el municipio de "Muy Muy" y explotadas de forma extensiva (fincas 1 y 2) y una tercera en el municipio de Tipitapa explotada de forma intensiva (3). La. base principal de este trabajo la constituyó la información proporcionada por loa productores, la que fue recolectada a través de un diagnóstico estático y un dinámico por el periodo de un año, la mayor parte de esta era de carácter económico, dándole prioridad a los gastos e ingresos incurridos en el periodo, además, se consideró algunas actividades de manejo practicado en ella. Se determinaron algunos índices productivos, la inversión inicial en medios fijos, los gastos por componentes, los ingresos y la rentabilidad entre otras. Los resultados indican que las fincas ubicadas en la zona de Tipitapa presentan ventajas comparativas en cuanto a la calidad de los suelos, facilidad de tecnificación, acceso al mercado, adquisición de insumos a más bajos precios Etc., dentro de las fincas evaluadas la tierra represento la mayor inversión de capital en medios fijos (53.58%), para las fincas de "Muy Muy" y 38% para la finca tres. Los mayores gastos correspondieron al componente mano de obra en las tres fincas, mientras que lo efectuado en alimentación en la finca uno y dos (10%) reflejan la baja suplementación en relación a la finca tres (40%) el que constituyó en esta un gasto constante. Respecto a los costos fijos y variables, la finca uno fue la que presentó los costos fijos más altos (76.29%); y la finca tres los costos variables (39.50%). El costo de producción de un litro de leche resultó superior al precio de venta del mismo en las tres fincas, al considerar dentro de los costos el interés de capital (Método A), el precio de venta fue C$1.25, C$1.15 y C$1,50 y el costo de producción de C$1.44, C$1.16 y C$1. 72. Al excluir dicho interés (Método B) el costo de producción fue de C$1.09, C$0.86 y C$1.42. Los mayores ingresos fueron aportados por el subsistema leche en las tres fincas, por concepto de venta de leche fluida y animales propios de esta actividad (85.40%, 98.12% y 67.24%). Al establecer relación entre los ingresos totales, costos totales y la inversión se encontró que las fincas 1 y 3 operaron con pérdidas determinándose entonces que las actividades no fueron rentables (-7.283%) y (-12.663%) durante este período, mientras que la finca 2 presentó una rentabilidad de (4.4%). Se identificaron algunas limitantes que al final repercuten en la actividad económica de las fincas sobresaliendo entre otros: Los bajos precios por la venta de los productos, los altos costos de los insumos, falta de conservación de pastos en la época seca, asistencia técnica irregular, la no utilización de registros, entre otras. Sólo con el incremento del volumen de la producción y superando la mayoría de las limitantes es que se logrará que las fincas amplíen sus beneficios, cubran sus costos y logren operar sin pérdidas.

Evaluación de las condiciones requeridas para la germinación y métodos de interrupción de dormancia en semillas de Echinochloa colona (L.) link, para su posible manejo ecológico

La presen te investigación se centró e n conocer las condiciones requeridas para la germinación y la interrupción de dormancia de la especie Echinochloa colona (L.) Link, la cual es una especie de interés particular para productores de arroz en nuestro país, a causa de la competencia que esta e jerce con el cultivo del arroz, traduciéndose en una reducción en los rendimientos. El objetivo del estudio es evaluar condiciones requeridas para su germinación y el efecto de diferentes métodos de interrupción de dormancia; para obtener información so bre los factores que controlan la germinación, posibles estrategias de sobre vivencia y el método que libera la dormancia de Echinochloa colona (L.) Link, que permita obtener herramientas que contribuyan a un posible manejo ecológico de Echinochloa col ona (L.) Link en campos cultivados. El estudio se realizó en el laboratorio de semillas del Programa de Recursos Genéticos Nicaragüenses (REGEN) adscrito a la Facultad de Agronomía de la Universidad Nacional Agraria, entre los meses de Enero y Agosto del 2 006. El material biológico (semilla botánica) se colectó en la comarca Malacatoya, departamento de Granada. El estudio se realizó en dos fases: En la primera fase se realizaron: pruebas de viabilidad, determinación del contenido de Humedad (según ISTA 199 6), prueba de germinación y prueba de germinación con semillas previamente secadas a temperatura de 60 ± 1 0 C por 48 horas y 130 ± 1 0 C por 4 horas. En la segunda fase se realizó el ensayo de interrupción de dormancia, para ello se estableció un DCA arregla do en un bifactorial donde se evaluaron nueve tratamientos: Etanol (0.5 M) má s luz roja continua, Luz continua, Estratificación má s 5 seg. luz, Estratificación má s luz continúa, Agua hirviendo, Etanol (0.5 M), Ácido sulfúrico, Escarificación mecánica y un testigo. Los nueve tratamientos fueron sometidos a dos temperaturas (20 ± 1 0 C y 26± 1 0 C). En l os resultados de la primera fase , las semillas de Echinochloa colona (L.) Link mostraron una viabilidad promedio de 92%. En la prueba de contenido de humedad n o se logró determinar la humedad en semillas de Echinochloa colona (L.) Link debido a falta d e información en la literatura, y la diferencia entre los valores obtenidos para las temperaturas de secado ; en las pruebas de germinación no se observó respuesta. En la segunda fase , el análisis de varianza al 99% de confianza, para las variables Porcentaje y Tasa de Germinación, mostró efectos solamente entre los tratamientos evaluados; la separación de medias por Duncan ( a = 0.05) muestra que los mejores tratamie ntos que liberan de la dormancia a est a especie son: Etanol (0.5 M) má s luz roja continua y Luz continua. La respuesta de las semillas de Echinochloa colona (L.) Link a los tratamientos de interrupción de dormancia con luz, determinaron que las semillas de esta especie son fotoblásticas o fotolatentes, además sugiere que la luz es un factor importante para la germinación de esta especie. La respuesta de Echinochloa colona (L.) Link a tratamientos con luz y escarificaron química sugieren que la dormancia de esta es pecie es fisiológica leve . La presencia de dormancia en esta especie puede ser un mecanismo de sobrevivencia en los campos.

Evaluación del crecimiento, rendimiento y rentabilidad en papaya (Carica papaya L.) utilizando tres dosis de vermicompost, Managua, 2009-2010

El estudio se realizó en la Universidad Nacional Agraria (UNA), en el kilómetro 12 ½ Carretera norte, Managua. El objetivo de este ensayo fue evaluar crecimiento, rendimiento y rentabilidad en papaya (Carica papaya L.), usando tres dosis de vermicompost 10, 15 y 20 t(ha año) -1 aplicados con una frecuencia de cada dos meses, en el periodo verano - invierno 2009 - 2010. El área experimental tuvo dimensiones de 30m de largo por 24m de ancho, equivalente aun área total de 720 m2 estableciéndose 180 plantas distribuidas en 15 surcos con 12 plantas cada surco. Las variables de estudio tomadas en consideración fueron sometidas a la prueba Kruskal Wallis al 95% de confianza: a) Variables de crecimiento; obtuvo mejores resultados el tratamiento v 20 evaluando así: diámetro superior del tallo con 6.29 cm; diámetro inferior del tallo con 13.71 cm; longitud del tallo con 353.59 cm; altura de inserción de primera flor con 81.56 cm; altura de inserción de primer fruto con 116.49cm; número de hojas vivas con 18.68; número de hojas muertas con 67.18 y número de hojas con 23.17. b) Variables de rendimiento: número de frutos cosechados, obteniendo mejores resultados el tratamiento v 20 con 55 500 papayas (ha-1 ciclo); peso de frutos cosechados, logrando mayor rendimiento el tratamiento v 10 con 34750 kg ha-1; eje mayor de papaya con el tratamiento v 20 con 27.27cm y eje menor de papaya manifestándose mejor tratamiento v 10 con 12.20cm. c) Variable de rentabilidad económica; usando la metodología CIMMYT 1998 se analizaron los datos económicos y reveló que es de mayor rentabilidad el tratamiento v 10 con C$ 20.15. El análisis económico del presupuesto parcial reflejó que los costos que varían y el beneficio neto en el tratamiento a1 presentó un monto de C$ 38 443.2 ha-1 y C$ 774706.8 ha-1 respectivamente.

用断裂力学和声发射法预计疲劳寿命

<正> 符 号a——穿透裂纹的裂纹长度,硬币形裂纹 的裂纹半径;a_0——初始裂纹长度;A——在N-K关系(方程1)中的比例 常数;B——试件厚度;C——在裂纹扩展关系(方程2)中的比 例常数;D——塑性体积和声发射计数中的比例常 数(方程14);F——在楔形张开加载(WOL)断裂韧 性试件上的拉伸载荷;

“Deborah Numbers”, Coupling Multiple Space and Time Scales and Governing Damage Evolution to Failure

Two different spatial levels are involved concerning damage accumulation to eventual failure. nucleation and growth rates of microdamage nN* and V*. It is found that the trans-scale length ratio c*/L does not directly affect the process. Instead, two independent dimensionless numbers: the trans-scale one * * ( V*)including the * **5 * N c V including mesoscopic parameters only, play the key role in the process of damage accumulation to failure. The above implies that there are three time scales involved in the process: the macroscopic imposed time scale tim = /a and two meso-scopic time scales, nucleation and growth of damage, (* *4) N N t =1 n c and tV=c*/V*. Clearly, the dimensionless number De*=tV/tim refers to the ratio of microdamage growth time scale over the macroscopically imposed time scale. So, analogous to the definition of Deborah number as the ratio of relaxation time over external one in rheology. Let De be the imposed Deborah number while De represents the competition and coupling between the microdamage growth and the macroscopically imposed wave loading. In stress-wave induced tensile failure (spallation) De* < 1, this means that microdamage has enough time to grow during the macroscopic wave loading. Thus, the microdamage growth appears to be the predominate mechanism governing the failure. Moreover, the dimensionless number D* = tV/tN characterizes the ratio of two intrinsic mesoscopic time scales: growth over nucleation. Similarly let D be the “intrinsic Deborah number”. Both time scales are relevant to intrinsic relaxation rather than imposed one. Furthermore, the intrinsic Deborah number D* implies a certain characteristic damage. In particular, it is derived that D* is a proper indicator of macroscopic critical damage to damage localization, like D* ∼ (10–3~10–2) in spallation. More importantly, we found that this small intrinsic Deborah number D* indicates the energy partition of microdamage dissipation over bulk plastic work. This explains why spallation can not be formulated by macroscopic energy criterion and must be treated by multi-scale analysis.

Defects structure characterization of NiMnGa alloys by PALS

16th International Conference on Positron Annihilation (ICPA) Univ Bristol, H H Wills Phys Lab, Bristol, ENGLAND AUG 19-24, 2012 Edited by:Alam, A; Coleman, P; Dugdale, S; Roussenova, M

Is General Relativity a simplified theory?

IARD 8th Biennial Conference on Classical and Quantum Relativistic Dynamics of Particles and Fields - Galileo Galilei Inst Theoret Phys (GGI), Florence, ITALY - MAY 29-JUN 01, 2012. Edited by:Horowitz, LP

A Featureless Approach to 3D Polyhedral Building Modeling from Aerial Images

This paper presents a model-based approach for reconstructing 3D polyhedral building models from aerial images. The proposed approach exploits some geometric and photometric properties resulting from the perspective projection of planar structures. Data are provided by calibrated aerial images. The novelty of the approach lies in its featurelessness and in its use of direct optimization based on image rawbrightness. The proposed framework avoids feature extraction and matching. The 3D polyhedral model is directly estimated by optimizing an objective function that combines an image-based dissimilarity measure and a gradient score over several aerial images. The optimization process is carried out by the Differential Evolution algorithm. The proposed approach is intended to provide more accurate 3D reconstruction than feature-based approaches. Fast 3D model rectification and updating can take advantage of the proposed method. Several results and evaluations of performance from real and synthetic images show the feasibility and robustness of the proposed approach.