The symbolic, socio-economic and exchange value of Imperial German and National Socialist medals and badges, 1701 to the present

This thesis examines the manufacture, use, exchange (including gift exchange), collecting and commodification of German medals and badges from the early 18th century until the present-day, with particular attention being given to the symbols that were deployed by the National Socialist German Workers’ Party (NSDAP) between 1919 and 1945. It does so by focusing in particular on the construction of value through insignia, and how such badges and their symbolic and monetary value changed over time. In order to achieve this, the thesis adopts a chronological structure, which encompasses the creation of Prussia in 1701, the Napoleonic wars and the increased democratisation of military awards such as the Iron Cross during the Great War. The collapse of the Kaiserreich in 1918 was the major factor that led to the creation of the NSDAP under the eventual strangle-hold of Hitler, a fundamentally racist and anti-Semitic movement that continued the German tradition of awarding and wearing badges. The traditional symbols of Imperial Germany, such as the eagle, were then infused with the swastika, an emblem that was meant to signify anti-Semitism, thus creating a hybrid identity. This combination was then replicated en-masse, and eventually eclipsed all the symbols that had possessed symbolic significance in Germany’s past. After Hitler was appointed Chancellor in 1933, millions of medals and badges were produced in an effort to create a racially based “People’s Community”, but the steel and iron that were required for munitions eventually led to substitute materials being utilised and developed in order to manufacture millions of politically oriented badges. The Second World War unleashed Nazi terror across Europe, and the conscripts and volunteers who took part in this fight for living-space were rewarded with medals that were modelled on those that had been instituted during Imperial times. The colonial conquest and occupation of the East by the Wehrmacht, the Order Police and the Waffen-SS surpassed the brutality of former wars that finally culminated in the Holocaust, and some of these horrific crimes and the perpetrators of them were perversely rewarded with medals and badges. Despite Nazism being thoroughly discredited, many of the Allied soldiers who occupied Germany took part in the age-old practice of obtaining trophies of war, which reconfigured the meaning of Nazi badges as souvenirs, and began the process of their increased commodification on an emerging secondary collectors’ market. In order to analyse the dynamics of this market, a “basket” of badges is examined that enables a discussion of the role that aesthetics, scarcity and authenticity have in determining the price of the artefacts. In summary, this thesis demonstrates how the symbolic, socio-economic and exchange value of German military and political medals and badges has changed substantially over time, provides a stimulus for scholars to conduct research in this under-developed area, and encourages collectors to investigate the artefacts that they collect in a more historically contextualised manner.

Dispersion and optimization of a calcium sulfoaluminate mortar prepared with superplasticizer

Calcium sulfoaluminate (CSA) cements/mortars are receiving increasing attention since their manufacture produces less CO2 than ordinary Portland cement (OPC) (up to 22% of decrease depending on its composition). These systems are complex and there are many parameters affecting their hydration mechanism, such as water-to-cement (w/c) ratio, type and amount of sulfate source, and so on. Low w/c ratios, within certain limits, may reduce the porosity and consequently, improve the mechanical strengths. However, it is accompanied by an increasing of viscosity and lack of both workability and homogeneity, with the consequent negative effect on the mechanical properties. The dispersion of the particles through the adsorption of the right amount and type of additives, such as superplasticizers, is a key point to improve the workability of mortars allowing both the preparation of homogeneous mixtures and the reduction of the amount of mixing water. This work deals with the preparation and optimization of homogeneous CSA-mortars with improved mechanical strengths. The optimum amount of superplasticizer was optimized through rheological measurements. The effect of different amounts of the superplasticizer on the viscosity of the mortars, its hydration mechanism and corresponding mechanical properties has been studied and will be discussed.

Synthesis and behavior of Belite-Alite-Ye’elimite (BAY) cement

Ye’elimite based cements have been studied since 70’s years in China, due to the irrelevant characteristics from a hydraulic and environmental point of view. One of them is the reduced fuel consumption, related to the lower temperature reaction required for this kind of cement production as compared to Ordinary Portland Cement (OPC), another characteristic is the reduced requirement of carbonates as a typical raw material, compared to OPC, with the consequent reduction in CO2 releases (~22%)from combustion. Thus, Belite-Ye’elimite-Ferrite (BYF) cements have been developed as potential OPC substitutes. BYF cements contain belite as main phase (>50 wt%) and ye´elimite as the second content phase (~30 wt%). However, an important technological problem is associated to them, related to the low mechanical strengths developed at intermediate hydration ages (3, 7 and 28 days). One of the proposed solutions to this problem is the activation of BYF clinkers by preparing clinkers with high percentage of coexisting alite and ye'elimite. These clinkers are known Belite-Alite-Ye’elimite (BAY) cements. Their manufacture would produce ~15% less CO2 than OPC. Alite is the main component of OPC and is responsible for early mechanical strengths. The reaction of alite and ye´elimite with water will develop cements with high mechanical strengths at early ages, while belite will contribute to later curing times. Moreover, the high alkalinity of BAY cement pastes/mortars/concretes may facilitate the use of supplementary cementitious materials with pozzolanic activity which also contributes to decrease the CO2 footprint of these ecocements. The main objective of this work was the design and optimization of all the parameters evolved in the preparation of a BAY eco-cement that develop higher mechanical strengths than BYF cements. These parameters include the selection of the raw materials (lime, gypsum, kaolin and sand), milling, clinkering conditions (temperature, and holding time), and clinker characterization The addition of fly ash has also been studied. All BAY clinker and pastes (at different hydration ages) were mineralogically characterized through laboratory X-ray powder diffraction (LXRPD) in combination with the Rietveld methodology to obtain the full phase assemblage including Amorphous and Crystalline non-quantified, ACn, contents. The pastes were also characterized through rheological measurements, thermal analyses (TA), scanning electronic microscopy (SEM) and nuclear magnetic resonance (NMR). The compressive strengths were also measured at different hydration times and compared to BYF.

Chatter avoidance in the milling of thin floors with bull-nose end mills: Model and stability diagrams

The milling of thin parts is a high added value operation where the machinist has to face the chatter problem. The study of the stability of these operations is a complex task due to the changing modal parameters as the part loses mass during the machining and the complex shape of the tools that are used. The present work proposes a methodology for chatter avoidance in the milling of flexible thin floors with a bull-nose end mill. First, a stability model for the milling of compliant systems in the tool axis direction with bull-nose end mills is presented. The contribution is the averaging method used to be able to use a linear model to predict the stability of the operation. Then, the procedure for the calculation of stability diagrams for the milling of thin floors is presented. The method is based on the estimation of the modal parameters of the part and the corresponding stability lobes during the machining. As in thin floor milling the depth of cut is already defined by the floor thickness previous to milling, the use of stability diagrams that relate the tool position along the tool-path with the spindle speed is proposed. Hence, the sequence of spindle speeds that the tool must have during the milling can be selected. Finally, this methodology has been validated by means of experimental tests.

Evaluating social marketing’s upstream metaphor: does it capture the flows of behavioural influence between ‘upstream’ and ‘downstream’ actors?

Metaphors are powerful forms of communication that can both facilitate and constrain disciplinary discourse, so the choice of metaphor used to explain concepts of disciplinary importance should not be undertaken lightly. A single case study methodology involving an ‘upstream’ firm considering whether to manufacture products with environmental attributes was consequently used to test three previously unexamined assumptions associated with the upstream/downstream metaphor, a metaphorical distinction that continues to have sway within the social marketing discipline. Contrary to these assumptions, the flows of behavioural influence between ‘upstream’ and ‘downstream’ actors were found to be bidirectional (rather than unidirectional), interactive (rather than independent), and distinctive (rather than non-distinctive). These findings suggest the need for alternative models that can better reflect the complex, multidirectional relationships responsible for the emergence of many social issues.

Streptococcus thermophilus APC151 strain is suitable for the manufacture of naturally GABA-enriched bioactive yogurt

Consumer interest in health-promoting food products is a major driving force for the increasing global demand of functional (probiotic) dairy foods. Yogurt is considered the ideal medium for delivery of beneficial functional ingredients. Gamma-amino-butyric acid has potential as a bioactive ingredient in functional foods due to its health-promoting properties as an anti-stress, anti-hypertensive, and anti-diabetic agent. Here, we report the use of a novel Streptococcus thermophilus strain, isolated from the digestive tract of fish, for production of yogurt naturally enriched with 2 mg/ml of gamma-amino-butyric acid (200 mg in a standard yogurt volume of 100 ml), a dose in the same range as that provided by some commercially available gamma-amino-butyric acid supplements. The biotechnological suitability of this strain for industrial production of yogurt was demonstrated by comparison with the reference yogurt inoculated with the commercial CH1 starter (Chr. Hansen) widely used in the dairy industry. Both yogurts showed comparable pH curves [ΔpH/Δt = 0.31-0.33 h-1], viscosity [0.49 Pa-s], water holding capacity [72–73%], and chemical composition [moisture (87–88%), protein (5.05–5.65%), fat (0.12–0.15%), sugar (4.8–5.8%), and ash (0.74–1.2%)]. Gamma-amino-butyric acid was not detected in the control yogurt. In conclusion, the S. thermophilus APC151 strain reported here provides a natural means for fortification of yogurt with gamma-amino-butyric acid.

EU-North Africa relations in cross-border law enforcement: new legal challenges for the EU in the post-Lisbon and post-Stockholm era

The Stockholm Programme, allied to the Lisbon Treaty, heralds a new era of development of the EU provisions on cross-border law enforcement. The focus is shifting from the ongoing internal EU developments to the external relations of the EU. Many North African countries have had long legal relationships with the EU through the Euro-Mediterranean Partnerships. A number of these partnership agreements make express references, at the political level, to the development of cross-border law enforcement provision, as is the case of Morocco and Algeria with regard to drug trafficking and manufacture, or the lengthy references by Egypt to many of the crimes of interest to the EU’s own law enforcement legal framework. Algeria is currently focusing on modernising their own police forces, with both Algeria and Tunisia, reforming their criminal judicial frameworks. Another key player, Libya, currently has no legal agreements with the EU, and at least until the recent conflict, maintained an observer status in the Euro-Mediterranean process. At a practitioner level, the European Police College (CEPOL) is currently involved in the Euromed Police II programme. Clearly momentum is developing, both within the EU and from a number of Euro-Med North African countries to develop closer law enforcement co-operation. This may well develop further with the recent changes in governments of a number of North African countries. The EU approach in the Police and Judicial Cooperation in Criminal Matters (PJCCM) policy area is to develop a legal framework upon which EU cross-border law enforcement will be based. The current EU cross-border law enforcement framework is the product of many years of multi-level negotiations. Challenges will arise as new countries from different legal and policing traditions will attempt to engage with already highly detailed legal and practice frameworks. The shared European legal traditions will not necessarily be reflected in the North African countries. This chapter critically analyses, from an EU legal perspective the problems and issues that will be encountered as the EU’s North African partner countries attempt to articulate into the existing, and still developing EU cross-border law enforcement framework.

Machinability of metallic and ceramic biomaterials : a review

The machining process is the most common method for metal cutting, especially in the fabrication of biomaterials and artificial implants. In modern industry, the goal of production is to manufacture products at a low cost, with the highest quality in the shortest time. The main focus of the research presented here is to provide a review of the machinability of metallic and ceramic biomaterials in traditional machining processes, such as turning, milling and grinding. Thereafter, machining strategies, machinability and surface characteristics post machining are discussed. To provide a better understanding of the machining process, various cutting tools and fluids are analysed. Finally, the current research gap and directions of prospect investigations are highlighted.

Characterization and Technological Features of Autochthonous Coagulase-Negative Staphylococci as Potential Starters for Portuguese Dry Fermented Sausages

The manufacture of dry fermented sausages is an important part of the meat industry in Southern Europeancountries. These products are usually produced in small shops from a mixture of pork, fat, salt, and condiments andare stuffed into natural casings. Meat sausages are slowly cured through spontaneous fermentation by autochthonousmicrobiota present in the raw materials or introduced during manufacturing. The aim of this work was to evaluate thetechnological and safety features of coagulase-negative staphylococci (CNS) isolated from Portuguese dry fermented meatsausages in order to select autochthonous starters. Isolates (n = 104) obtained from 2 small manufacturers were identifiedas Staphylococcus xylosus, Staphylococcus equorum, Staphylococcus saprophyticus,andStaphylococcus carnosus. Genomically diverseisolates (n = 82) were selected for further analysis to determine the ability to produce enzymes (for example, nitrate-reductases, proteases, lipases) and antibiotic susceptibility. Autochthonous CNS producing a wide range of enzymes andshowing low antibioresistance were selected as potential starters for future use in the production of dry fermented meatsausages.

Lithic economy and territory of Epipaleolithic hunter–gatherers in the Middle Tagus: The case of Pena d'Água (Portugal)

In Central Portugal (westernmost Eurasia) the transition from the traditional Pleistocene hunter–gatherer societies to the complex Mesolithic societies of the Holocene has been debated for decades. While some argue that these differences were a progressive phenomenon that started with the shift from the Pleistocene to the Holocene, others defend that the Late Pleistocene patterns were fairly similar to those of the Epipaleolithic and that the major shift was rapid, dramatic and triggered by the necessary adaptation to the 8.2 ka cal BP (8.09–8.25 ka cal BP) climatic event. The study of lithic raw material provenance might be useful for this discussion, since it has been suggested that the Magdalenian and Epipaleolithic populations from this region were collecting this resources within a close range territory, whereas the Mesolithic populations were acquiring them at longer distances. In this paper, we present the results from p-XRF, VP-SEM-EDS and μ-XRD analysis done on the Epipaleolithic lithic assemblage from Pena d'Água Rockshelter, and in some geological samples from secondary sources located ∼14 km from this site. This layer is of major relevance for this debate since it is dated from 8.19 ka cal BP. If the transition was gradual, it would be expected that this assemblage would show some traits of higher-complexity seen in the Mesolithic, namely of longer distance acquisition. However, our results indicate correspondence between the archaeological chert types and some of the geological sources. The differences seen between the archaeological specimens and geological samples are mostly present in traits that can be related with manufacture, handling and post-depositional phenomena. The results suggest that, in what concerns to the economy of abiotic resources, the Epipaleolithic populations living at the time of the dramatic 8.2 ka cal BP cold event, were performing a short range acquisition of lithic raw materials which reinforces the idea of continuity from the Late Pleistocene to the 8.2 ka cal BP event and an abrupt and dramatic shift soon after this phenomena.

Characterization of the glaze and in-glaze pigments of the nineteenth-century relief tiles from the Pena National Palace, Sintra, Portugal

The glaze and in-glaze pigments of the historical nineteenth-century glazed tiles from the Pena National Palace (Sintra, Portugal) were characterized using a multi-analytical approach. Chemical composition and microstructural characterization were ascertained by µ-PIXE, µ-Raman, optical microscopy and VP-SEM–EDS. The manufacturing technique and colour palette in these tiles were found to be close to the ceramic pigments used in traditional majolica. The blue and purple colours derive from cobalt oxide and manganese oxide, respectively. A mixture of Pb–Sn–Sb yellow with cobalt oxide and iron oxide was used for green and dark yellow, respectively, while grey tonalities consist of a complex mixture of cobalt oxide, manganese oxide and Pb–Sn–Sb yellow in different proportions. Results obtained allowed the determination of the oxides and elements used in pigments as well as production techniques, resorting to traditional majolica manufacture, although the tiles were produced by the end of the nineteenth century.

Provenance and technological analysis of selected cuneiform tablets from the late second millennium BC

The aim of the present study is to examine a group of clay tablets by thin-section petrography and thermogravimetric analysis in order to assess specific problems related to their provenance and manufacture technology. Two sets of documents dating to the fourteenth-thirteenth centuries BC will be considered separately throughout the thesis, with different research questions in mind for each case study. The petrographic data will be compared when possible with the chemical composition of the tablets, determined by pXRF and/or INAA in previous studies. On the whole, this dissertation is an attempt to combine textual, archaeological, petrographic, chemical and thermogravimetric information in order to get a better understanding of the materiality and the historical implications of the objects under examination; Resumo: O objetivo do presente estudo é examinar um grupo de tabuletas de argila por petrografia e análise termogravimétrica, a fim de avaliar problemas específicos relacionados com a sua proveniência e tecnologia de fabricação. Dois conjuntos de documentos que datam dos séculos XIV-XIII a.C. serão considerados separadamente ao longo da tese, com diferentes questões de pesquisa em mente para cada estudo de caso. Os dados petrográficos serão comparados quando possível com a composição química das tabuletas, determinada por pXRF e/ou INAA em estudos anteriores. No seu conjunto, esta dissertação é uma tentativa de combinar informação textual, arqueológica, petrográfica, química e termogravimétrica a fim de obter uma melhor compreensão da composição material e das implicações históricas dos objetos em análise.