Direct femtosecond laser inscription in transparent dielectrics

Since 1996 direct femtosecond inscription in transparent dielectrics has become the subject of intensive research. This enabling technology significantly expands the technological boundaries for direct fabrication of 3D structures in a wide variety of materials. It allows modification of non-photosensitive materials, which opens the door to numerous practical applications. In this work we explored the direct femtosecond inscription of waveguides and demonstrated at least one order of magnitude enhancement in the most critical parameter - the induced contrast of the refractive index in a standard borosilicate optical glass. A record high induced refractive contrast of 2.5×10-2 is demonstrated. The waveguides fabricated possess one of the lowest losses, approaching level of Fresnel reflection losses at the glassair interface. High refractive index contrast allows the fabrication of curvilinear waveguides with low bend losses. We also demonstrated the optimisation of the inscription regimes in BK7 glass over a broad range of experimental parameters and observed a counter-intuitive increase of the induced refractive index contrast with increasing translation speed of a sample. Examples of inscription in a number of transparent dielectrics hosts using high repetition rate fs laser system (both glasses and crystals) are also presented. Sub-wavelength scale periodic inscription inside any material often demands supercritical propagation regimes, when pulse peak power is more than the critical power for selffocusing, sometimes several times higher than the critical power. For a sub-critical regime, when the pulse peak power is less than the critical power for self-focusing, we derive analytic expressions for Gaussian beam focusing in the presence of Kerr non-linearity as well as for a number of other beam shapes commonly used in experiments, including astigmatic and ring-shaped ones. In the part devoted to the fabrication of periodic structures, we report on recent development of our point-by-point method, demonstrating the shortest periodic perturbation created in the bulk of a pure fused silica sample, by using third harmonics (? =267 nm) of fundamental laser frequency (? =800 nm) and 1 kHz femtosecond laser system. To overcome the fundamental limitations of the point-by-point method we suggested and experimentally demonstrated the micro-holographic inscription method, which is based on using the combination of a diffractive optical element and standard micro-objectives. Sub-500 nm periodic structures with a much higher aspect ratio were demonstrated. From the applications point of view, we demonstrate examples of photonics devices by direct femtosecond fabrication method, including various vectorial bend-sensors fabricated in standard optical fibres, as well as a highly birefringent long-period gratings by direct modulation method. To address the intrinsic limitations of femtosecond inscription at very shallow depths we suggested the hybrid mask-less lithography method. The method is based on precision ablation of a thin metal layer deposited on the surface of the sample to create a mask. After that an ion-exchange process in the melt of Ag-containing salts allows quick and low-cost fabrication of shallow waveguides and other components of integrated optics. This approach covers the gap in direct fs inscription of shallow waveguide. Perspectives and future developments of direct femtosecond micro-fabrication are also discussed.

Reforming damages for misrepresentation:the case for coherent aims and principles

Examines the basis on which damages for misrepresentation are awarded, suggesting that the underlying principles lack coherence, and calls for clarification of the law. Argues that there are valid policy considerations justifying a distinction between the basis of the award of damages for fraudulent misrepresentation and negligent misrepresentation. Explains why identification of the three stages in the process of awarding damages for misrepresentation are crucial to the application of the underlying legal principles of causation and remoteness at the right stage of the process. Reviews case law on lost opportunity damages for fraudulent misrepresentation, the application of loss of chance principles, and recovery of post-contract losses.

Pattern generation by dissipative parametric instability

Nonlinear instabilities are responsible for spontaneous pattern formation in a vast number of natural and engineered systems, ranging from biology to galaxy buildup. We propose a new instability mechanism leading to pattern formation in spatially extended nonlinear systems, which is based on a periodic antiphase modulation of spectrally dependent losses arranged in a zigzag way: an effective filtering is imposed at symmetrically located wave numbers k and -k in alternating order. The properties of the dissipative parametric instability differ from the features of both key classical concepts of modulation instabilities, i.e., the Benjamin-Feir instability and the Faraday instabiltyity. We demonstrate how the dissipative parametric instability can lead to the formation of stable patterns in one- and two-dimensional systems. The proposed instability mechanism is generic and can naturally occur or can be implemented in various physical systems.

InAs/AlSb widely tunable external cavity quantum cascade laser around 3.2 μm

Room temperature, tunable, external-cavity short-wavelength InAs/AlSb quantum cascade laser (QCL) is reported. Wavelength tuning of 85 nm for the spectral range between 3190 nm and 3275 nm has been achieved by rotating the diffraction grating forming the external cavity. To suppress lasing inside the QCL cavity, its ridge was tilted by 7° at the external cavity end. The optimal tilting angle of the laser ridge was chosen by careful consideration of the return losses of the TM-polarized waveguide mode from the diffraction grating in a quasi-Littrow configuration and the Fabry-Pérot feedback from the tilted laser facet. No antireflection coating was used. © 2013 American Institute of Physics.

The B-Terminal Busy Probability Prediction

In the teletraffic engineering of all the telecommunication networks, parameters characterizing the terminal traffic are used. One of the most important of them is the probability of finding the called (B-terminal) busy. This parameter is studied in some of the first and last papers in Teletraffic Theory. We propose a solution in this topic in the case of (virtual) channel systems, such as PSTN and GSM. We propose a detailed conceptual traffic model and, based on it, an analytical macro-state model of the system in stationary state, with: Bernoulli– Poisson–Pascal input flow; repeated calls; limited number of homogeneous terminals; losses due to abandoned and interrupted dialling, blocked and interrupted switching, not available intent terminal, blocked and abandoned ringing and abandoned conversation. Proposed in this paper approach may help in determination of many network traffic characteristics at session level, in performance evaluation of the next generation mobile networks.

In-cavity pulse shaping and dissipative parametric instability mode-locking in fibre lasers

At the level of fundamental research, fibre lasers provide convenient and reproducible experimental settings for the study of a variety of nonlinear dynamical processes, while at the applied research level, pulses with different and optimised features – e.g., in terms of pulse duration, temporal and/or spectral shape, energy, repetition rate and emission bandwidth – are sought with the general constraint of developing efficient cavity architectures. In this work, we review our recent progress on the realisation of pulse shaping in passively- mode-locked fibre lasers by inclusion of an amplitude and phase spectral filter into the laser cavity. We present a fibre laser design in which pulse shaping occurs through filtering of a spectrally nonlinearly broadened pulse in the cavity. This strategy of pulse shaping is illustrated through the numerical demonstration of the laser operation in different pulse-generation regimes, including parabolic, flattop and triangular waveform generations, depending on the amplitude profile of the in-cavity spectral filter [1]. As an application of this general approach, we show that the use of an in-cavity flat-top spectral filter makes it possible to directly generate sinc-shaped Nyquist pulses of high quality and of a widely tunable bandwidth from the laser [2]. We also report on a recently-developed versatile erbium-doped fibre laser, in which conventional soliton, dispersion-managed soliton (stretched-pulse) and dissipative soliton mode-locking regimes can be selectively and reliably targeted by programming different group-velocity dispersion profiles and bandwidths on an in-cavity programmable filter [3]. Further, we report on our recent results on the passive mode locking of a Raman fibre laser by a recently predicted new type of parametric instability – the dissipative Faraday instability [4], where spatially periodic zig-zag modulation of spectrally dependent losses can lead to pattern formation in the temporal domain. High-order harmonic mode locking is achieved in a very simple experimental configuration, with the laser cavity including an optical fibre and two chirped fibre Bragg gratings, and no additional mode-locking elements. The results not only open up new possibilities for the design of mode-locked lasers, but extend beyond fibre optics to other fields of physics and engineering. References [1] S. Boscolo, C. Finot, H. Karakuzu, P. Petropoulos, “Pulse shaping in mode-locked fiber laser by in-cavity spectral filter,” Opt. Lett., vol. 39, pp. 438–441, 2014. [2] S. Boscolo, C. Finot, S. K. Turitsyn, “Bandwidth programmable optical Nyquist pulse generation in passively mode-locked fiber laser,” IEEE Photon. J., vol. 7, 7802008(8), 2015. [3] J. Peng, S. Boscolo, “Filter-based dispersion-managed versatile ultrafast fibre laser,” Sci. Rep., 2016, In press. [4] A. M. Perego, N. Tarasov, D. V. Churkin, S. K. Turitsyn, K. Staliunas, “Pattern generation by dissipative parametric instability,” Phys. Rev. Lett., vol. 116, 028701, 2016.

Dissipative parametric modulation instability and pattern formation in nonlinear optical systems

We present the essential features of the dissipative parametric instability, in the universal complex Ginzburg- Landau equation. Dissipative parametric instability is excited through a parametric modulation of frequency dependent losses in a zig-zag fashion in the spectral domain. Such damping is introduced respectively for spectral components in the +ΔF and in the -ΔF region in alternating fashion, where F can represent wavenumber or temporal frequency depending on the applications. Such a spectral modulation can destabilize the homogeneous stationary solution of the system leading to growth of spectral sidebands and to the consequent pattern formation: both stable and unstable patterns in one- and in two-dimensional systems can be excited. The dissipative parametric instability provides an useful and interesting tool for the control of pattern formation in nonlinear optical systems with potentially interesting applications in technological applications, like the design of mode- locked lasers emitting pulse trains with tunable repetition rate; but it could also find realizations in nanophotonics circuits or in dissipative polaritonic Bose-Einstein condensates.

Algorithmes de construction et correction d'arbres de gènes par la réconciliation

Les gènes, qui servent à encoder les fonctions biologiques des êtres vivants, forment l'unité moléculaire de base de l'hérédité. Afin d'expliquer la diversité des espèces que l'on peut observer aujourd'hui, il est essentiel de comprendre comment les gènes évoluent. Pour ce faire, on doit recréer le passé en inférant leur phylogénie, c'est-à-dire un arbre de gènes qui représente les liens de parenté des régions codantes des vivants. Les méthodes classiques d'inférence phylogénétique ont été élaborées principalement pour construire des arbres d'espèces et ne se basent que sur les séquences d'ADN. Les gènes sont toutefois riches en information, et on commence à peine à voir apparaître des méthodes de reconstruction qui utilisent leurs propriétés spécifiques. Notamment, l'histoire d'une famille de gènes en terme de duplications et de pertes, obtenue par la réconciliation d'un arbre de gènes avec un arbre d'espèces, peut nous permettre de détecter des faiblesses au sein d'un arbre et de l'améliorer. Dans cette thèse, la réconciliation est appliquée à la construction et la correction d'arbres de gènes sous trois angles différents: 1) Nous abordons la problématique de résoudre un arbre de gènes non-binaire. En particulier, nous présentons un algorithme en temps linéaire qui résout une polytomie en se basant sur la réconciliation. 2) Nous proposons une nouvelle approche de correction d'arbres de gènes par les relations d'orthologie et paralogie. Des algorithmes en temps polynomial sont présentés pour les problèmes suivants: corriger un arbre de gènes afin qu'il contienne un ensemble d'orthologues donné, et valider un ensemble de relations partielles d'orthologie et paralogie. 3) Nous montrons comment la réconciliation peut servir à "combiner'' plusieurs arbres de gènes. Plus précisément, nous étudions le problème de choisir un superarbre de gènes selon son coût de réconciliation.

Nitrogen use efficiency in summer sorghum grown on clay soils

Nitrogen fertilizer inputs dominate the fertilizer budget of grain sorghum growers in northern Australia, so optimizing use efficiency and minimizing losses are a primary agronomic objective. We report results from three experiments in southern Queensland sown on contrasting soil types and with contrasting rotation histories in the 2012-2013 summer season. Experiments were designed to quantify the response of grain sorghum to rates of N fertilizer applied as urea. Labelled 15N fertilizer was applied in microplots to determine the fate of applied N, while nitrous oxide (N2O) emissions were continuously monitored at Kingaroy (grass or legume ley histories) and Kingsthorpe (continuous grain cropping). Nitrous oxide is a useful indicator of gaseous N losses. Crops at all sites responded strongly to fertilizer N applications, with yields of unfertilized treatments ranging from 17% to 52% of N-unlimited potential. Maximum yields ranged from 4500 (Kupunn) to 5450 (Kingaroy) and 8010 (Kingsthorpe) kg/ha. Agronomic efficiency (kg additional grain produced/kg fertilizer N applied) at the optimum N rate on the Vertosol sites was 23 (80 N, Kupunn) to 25 (160N, Kingsthorpe), but 40-42 on the Ferrosols at Kingaroy (70-100N). Cumulative N2O emissions ranged from 0.44% (Kingaroy legume) to 0.93% (Kingsthorpe) and 1.15% (Kingaroy grass) of the optimum fertilizer N rate at each site, with greatest emissions from the Vertosol at Kingsthorpe. The similarity in N2O emissions factors between Kingaroy and Kingsthorpe contrasted markedly with the recovery of applied fertilizer N in plant and soil. Apparent losses of fertilizer N ranged from 0-5% (Ferrosols at Kingaroy) to 40-48% (Vertosols at Kupunn and Kingsthorpe). The greater losses on the Vertosols were attributed to denitrification losses and illustrate the greater risks of N losses in these soils in wet seasonal conditions.

Algorithmes de construction et correction d'arbres de gènes par la réconciliation

Les gènes, qui servent à encoder les fonctions biologiques des êtres vivants, forment l'unité moléculaire de base de l'hérédité. Afin d'expliquer la diversité des espèces que l'on peut observer aujourd'hui, il est essentiel de comprendre comment les gènes évoluent. Pour ce faire, on doit recréer le passé en inférant leur phylogénie, c'est-à-dire un arbre de gènes qui représente les liens de parenté des régions codantes des vivants. Les méthodes classiques d'inférence phylogénétique ont été élaborées principalement pour construire des arbres d'espèces et ne se basent que sur les séquences d'ADN. Les gènes sont toutefois riches en information, et on commence à peine à voir apparaître des méthodes de reconstruction qui utilisent leurs propriétés spécifiques. Notamment, l'histoire d'une famille de gènes en terme de duplications et de pertes, obtenue par la réconciliation d'un arbre de gènes avec un arbre d'espèces, peut nous permettre de détecter des faiblesses au sein d'un arbre et de l'améliorer. Dans cette thèse, la réconciliation est appliquée à la construction et la correction d'arbres de gènes sous trois angles différents: 1) Nous abordons la problématique de résoudre un arbre de gènes non-binaire. En particulier, nous présentons un algorithme en temps linéaire qui résout une polytomie en se basant sur la réconciliation. 2) Nous proposons une nouvelle approche de correction d'arbres de gènes par les relations d'orthologie et paralogie. Des algorithmes en temps polynomial sont présentés pour les problèmes suivants: corriger un arbre de gènes afin qu'il contienne un ensemble d'orthologues donné, et valider un ensemble de relations partielles d'orthologie et paralogie. 3) Nous montrons comment la réconciliation peut servir à "combiner'' plusieurs arbres de gènes. Plus précisément, nous étudions le problème de choisir un superarbre de gènes selon son coût de réconciliation.

Auditoría de sistemas al cumplimiento de los requerimientos 7, 8, 9 de la norma PCIDSS aplicada a Coral Hipermercado, Racar plaza con corte a Junio de 2015

Coral Hipermercado GO es una empresa dedicada a la comercialización de diversos productos de consumo masivo. Debido a la demanda que mantienen y el nivel de transacciones que realizan en ventas diariamente, ofrece diversas formas de pago entre ellas las tarjetas de pago, mismas que por la actual situación del auge de los sistemas informáticos y de la necesidad de la seguridad de los datos ante actos maliciosos las marcas de tarjetas de crédito han visto necesaria la implementación obligatoria (tanto en comercios como en las entidades intermediarias) de la Normativa PCI DSS. De esta manera, el servicio que brindan a los tarjetahabientes a más de ser mejorado, sea seguro en todas sus instancias. A través de nuestra investigación se obtuvo conocimiento de que la empresa Coral Hipermercado GO no ha realizado anteriormente una auditoria de la Normativa PCI DSS, por lo que la implementación de la Normativa podría no ser completa o apropiada, las políticas de la empresa pueden no contener los procesos y procedimientos que se deben llevar a cabo, haciendo que la seguridad de accesos a los datos de los titulares de tarjetas se vean vulnerables, de igual manera el manejo de las autenticaciones y la infraestructura de la seguridad física, misma que permite el resguardo de los equipos y por ende de la información. Se observó en la auditoría realizada a los requerimientos 7, 8, 9 de la Normativa PCI DSS que la misma no ha sido socializada en su totalidad, existen falencias en su implementación ya que el uso de las autenticaciones, accesos a los datos y seguridad física no son correctos, viéndose expuesta la información de los datos de los titulares de tarjetas de pago y la posibilidad de incurrir en pérdidas debido a probables actos maliciosos que se podrían encontrar expuestos en un futuro. Es imperativo mencionar que la norma ayudara al cumplimiento de los objetivos siempre y cuando se logren disminuir las falencias de su implementación o caso contrario se procederá a dar las recomendaciones necesarias respecto a los problemas encontrados para posteriores correcciones de forma que se mejore la gestión de la empresa.

Tornar-se doutor: a relação de orientação e o desenvolvimento do/a doutorando/a

Apesar do estudo dos processos educativos no ensino superior ser um tópico bastante explorado pela Psicologia, o estudo do processo de doutoramento parece ter sido relegado para segundo plano ao longo dos anos. O presente estudo procurou analisar a perceção de desenvolvimento de estudantes de doutoramento (em termos de ganhos e perdas) e a relação de orientação (em termos de tipo de relação e qualidade percebida da relação), bem como o impacto dessa relação na perceção de desenvolvimento pessoal. Participaram neste estudo 308 estudantes de doutoramento de três universidades portuguesas. Os principais resultados obtidos parecem indicar que os doutorandos tendem a perceber a qualidade da relação de forma positiva, que estes percebem os orientadores como cooperantes, próximos e respeitadores da autonomia do estudante, e que estes tendem a perceber principalmente ganhos desenvolvimentais. De uma forma geral observou-se também que algumas dimensões do tipo de relação e da qualidade da relação parecem ter uma influência significativa na perceção de ganhos e perdas; On becoming a PhD: The relation of supervision and the development of the doctorate Abstract: Despite the study of educational processes in higher education is a topic extensively explored by Psychology, the study of the doctoral process seems to have been relegated to the background over the years. This study aimed to analyze the perception of development of PhD students (in terms of gains and losses) and the supervision relationship (in terms of type of relationship and perceived quality of the relationship), and the impact of this relationship on the perception of personal development. The sample consisted of 308 doctoral students from three portuguese universities. The main results seem to indicate that doctoral students tend to perceive the quality of the relationship as positive, that they perceive supervisors as cooperant, close and respectful for students’ autonomy, and that they tend to perceive mainly developmental gains. In general, it is also noted that some dimensions of the type of relationship and the relationship would appear to have a significant influence on the perception of gains and losses.

Biotechnology and crop protection in Brazil.

The process of modernization of Brazilian agriculture aimed at increasing the productivity in response to the high demand for agricultural products in the world market and it was based on the intensive use of inputs such as agrochemicals, intense mechanisation and breeding of new varieties. Among these, pesticides were incorporated in almost all production systems. Over reliance on pesticide use has produced many negative effects on both biotic and abiotic components of the environment, generating chemical contamination of soil and water, decrease in biological diversity of agroecosystems, disruption of natural cycles, pest resistance, intoxication of growers, among others. The consumption of pesticides in Brazil was 151.8 thousand tonnes in 1989, and today the country is the fifth world market of these products. The use of pesticides increased from 16 thousand tonnes (a.i.) in 1964 to 60.2 thousand tonnes in 1991, while the area planted to crops grew from 28.4 to 50.0 million ha in the same period. This means an increase of 276.2% in consumption of pesticides compared to an increase of 76% in planted area. Even with this large increase in the use of pesticides, the losses caused by pests have not been significantly reduced, and the net gain in crop productivity has been low. On the other hand, problems with food contamination, environmental degradation of growers have considerably mounted. It is possible to define two classes of crops regarding intense use of pesticides. One is represented by those crops that occupy large areas, and therefore contribute to a large amont of pesticides used for pest control in a country basis. The other class comprises crops that require large amounts of pesticides per unit of area, but not necessarily represent large amounts of pesticides used coutry-wide. Based on the classes proposed, citrus, soybean and sugarcane stand as crops with a nationally great consumption of pesticides, while tomato, potato and citrus are important as intensive users of pesticides. In this paper the biotechnologies in use, the biotechnologies in advanced stages of development, the main constraints to the development and use of biotechnlology and the impact of pesticed on the environment are discussed.

A sermon, preached in Boston, August 20, 1812, the day of humiliation and prayer, appointed by the President of the United States, in consequence of the declaration of war against Great Britain /

Published at the request of the hearers.