Estudo de um sistema híbrido de destilação solar para polimento de águas produzidas

The oil industry, experiencing a great economic and environmental impact, has increasingly invested in researches aiming a more satisfactory treatment of its largest effluent, i.e., produced water. These are mostly discarded at sea, without reuse and after a basic treatment. Such effluent contains a range of organic compounds with high toxicity and are difficult to remove, such as polycyclic aromatic hydrocarbons, salts, heavy metals, etc.. The main objective of this work was to study the solar distillation of produced water pre-treated to remove salts and other contaminants trough of a hybrid system with a pre-heater. This developed apparatus was called solar system, which consists of a solar heater and a conventional distillation solar still. The first device consisted of a water tank, a solar flat plate collector and a thermal reservoir. The solar distillator is of simple effect, with 1m2 of flat area and 20° of inclination. This dissertation was divided in five steps: measurements in the solar system, i.e. temperatures and distillate flow rate and weather data; modeling and simulation of the system; study of vapor-liquid equilibrium of the synthetic wastewater by the aqueous solution of p-xylene; physical and chemical analyses of samples of the feed, distillate and residue, as well as climatology pertinent variables of Natal-RN. The solar system was tested separately, with the supply water, aqueous NaCl and synthetic oil produced water. Temperature measurements were taken every minute of the thermal reservoir, water tank and distillator (liquid and vapor phases). Data of solar radiation and rainfall were obtained from INPE (National Institute for Space Research). The solar pre-heater demonstrated to be effective for the liquid systems tested. The reservoir fluid had an average temperature of 58°C, which enabled the feed to be pre-heated in the distillator. The temperature profile in the solar distillator showed a similar behavior to daily solar radiation, with temperatures near 70°C. The distillation had an average yield of 2.4 L /day, i.e., an efficiency of 27.2%. Mathematical modeling aided the identification of the most important variables and parameters in the solar system. The study of the vapor-liquid equilibrium from Total Organic Carbon (TOC) analysis indicated heteroazeotropia and the vapor phase resulted more concentrated in p-xylene. The physical-chemical analysis of pH, conductivity, Total Dissolved Solids (TDS), chlorides, cations (including heavy metals) and anions, the effluent distillate showed satisfactory results, which presents a potential for reuse. The climatological study indicates the region of Natal-RN as favorable to the operation of solar systems, but the use of auxiliary heating during periods of higher rainfall and cloud cover is also recommended

Suco desidratado de caju (Anacardium occidentale L.) por atomização: caracterização físico-química, bioativa e estudo da vida de prateleira do produto

Despite the relatively organized cashew (Anacardium occidentale L.) productive chain and the number of cashew derivatives found in the market, it is estimated that over 90% of the cashew peduncle is wasted. A possible strategy for a better commercial exploitation of this agroindustrial commodity would be the production of spray dried cashew pulp. Thus, this paper approaches the yellow cashew pulp spray drying process and the final product evaluation. Based on that, the shelf life of the spray dried cashew pulp packed in different packaging was evaluated. Drying was conducted in two drying temperatures (140 °C to 150 °C) and two concentrations of Arabic gum (AG, 15% and 25%), which summed four experimental groups. The drying performance was evaluated as well as the physicochemical characteristics (moisture, water activity, total soluble solids, pH, density, solubility, particle diameter, hygroscopicity, degree of caking, color, scanning electronic microscopy and X-ray diffraction), composition (protein, ash, fat and sugars) and bioactive and functional value (total phenolic compounds, carotenoids, ascorbic acid and antioxidant activity) of the final products. Results showed spray drying efficiency higher than 65% for all experiments, mainly for the C4 group (150 °C and 25% AG) which reached efficiency of 93.4%. It was also observed high solubility (94.7% to 97.9%) and the groups with lower hygroscopicity (5.8% and 6.5%) were those with the highest proportion of drying coadjuvant. The particle diameters ranged between 14.7 μm and 30.2 μm and increased with the proportion of AG. When comparing the product before and after spray drying, the drying impact was evident. However, despite the observed losses, dried yellow cashew showed high phenolic concentration (from 235.9 to 380.4 mg GAE eq / 100 g DM), carotenoids between 0.22 and 0.49 mg/100 g DM and remarkable ascorbic acid levels (852.4 to 1346.2 mg/100 g DM), in addition to antioxidant activity ranging from 12.9 to 16.4 μmol TE/ g DM. The shelf life study revealed decreased phenolic content over time associated to a slight water activity increase. Overall, our results unveil the technological and bioactive potential of dried yellow cashew as a functional ingredient to be used in food formulations or as a ready-to-use product. The technological approach presented here can serve as an efficient strategy for a rational use of the cashew apple, avoiding its current underutilization

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Variação da qualidade da água de chuva no início da precipitação

One of the most evident and actual concern, not only in the scientific means, but also of the public knowledge in general, is the lack problem of the potable water, that come increasing more each time, motivated mainly for the po llution of the sources, the bad use of the water and the increase of the population. In such a way, the necessity of looking for new water sources and the development of techniques to use sources minus explored is becoming even more important and urgent. T he rainwater comes being used since a long time like a supplying source, but, due the few knowledge of its characteristics, the generated preconception and the discrimination around its consumption and to the bad use of the technique of collection and stor age, it comes being little used, wasting consequently a significant parcel of this source. Trying to develop the knowing of some characteristics of the rainwater, the present work looks for to define the curve of variation of the quality of the rainwater i n three points with distinct characteristics of the city of Natal -RN, in the course of the precipitation, in some situations of time and space. For describe the curve of variation of the water s quality, some variables must be analyzed, and to be identifie d when they modify themselves in the endurance of rain, showing in which moment the purification of the water is more or less quickly. The pH, the Turbidity and the Electric Conductivity can be related with a big part of the physicist -chemistries variables found in the water and, like its analyses don't spend any material, they have easy access and measurement. The present work analyzes the curves of decline of these three variables, in three points with distinct characteristics in the city of Natal -RN, being these points: one next to the sea, another one in region with great buildings concentration and the last point in a less polluted area. For the studied region, it was during the five first millimeters of rain that occurs the biggest reduction of the exi sting impurities in the atmosphere, mainly between the first and the second millimeter, and after the five first millimeters the values of the variables stabilize. With exception of the University Campus, where initially the rainwater already has very good quality, the values of Turbidity and Electric Conductivity suffer a brusque reduction after the first millimeter of rain

Caracterização dos resíduos esgotados de sistemas de tratamento individual de esgotos de Natal

In Natal still dominates the use of individual disposal systems for domestic sewage, once only 29% of the city has a sewarage system. Wastes that are accumulated in these individual treatment systems should be exhausted periodically, service provided by collector entrepreneurs. Some of these companies causing major damage to the environment. In Natal, only two companies have their own septage (RESTI) treatment system, which were designed with parameters from domestic sewage generating strain and inefficient systems. Therefore, the characterization becomes essential as a source of parameters for their design. Thus, this work presents the physical-chemical and microbiological characterization of waste pumped from individual sewage treatment systems. Samples collections were made weekly from 5 different trucks at the reception point on the treatment plant on the point of the preliminary treatment. From each truck it was taken 5 samples during the discharge in order to make a composite sample. Afterwards, samples were carried out to laboratory and analyses for determination of temperature, pH, conductivity, BOD, COD, nitrogen (ammonia e organic), alkalinity, oils, phosphorus, solids, faecal coliforms and helminth egg. The results were treated as a single database, and ranked according to its generating source (multi and single house, lodging, health, services and / or food), area of origin (metropolitan, south and north) and type of system (cesspits, septic tank and / or sink). Through these data it was possible to verify that the type of system adopted by most in Natal and the metropolitan region is cesspit, besides to confirm the difference between the septage of areas with a population have different social and economical characteristics. It was found that the septage have higher concentrations than domestic sewage, except for thermotolerant coliforms that showed concentrations of 1,38E+07. Among the parameters studied, is the median values identified for COD (3,549 mg / L), BOD (973mg / L) and total solids (3.557mg / L). The volatile fraction constitutes about 70% of the total solids of the septage. For helminths has been a median of 7 eggs/L. In general, the characteristics of the waste followed the variability found in the literature reviewed for all variables, showing high amplitudes

Avaliação da Qualidade da Água do rio Pitimbu

The Pitimbu River Basin is concern reason, therefore this is one of the mains freshwater sources for the Natal city supplying. The Pitimbu waters river flow into Jiqui pond, as the main supplier of this, that supplies 16% of Natal population and there is a bigger importance despite the supplying of a parcel of Natal city made joining underground waters with the water proceeding from the Jiqui pond, being used for dilution waters of contaminated wells with nitrate. Even with the importance of the Pitimbu, there is a strong pressure of occupation of its edge according to a critical urban growth, becoming the situation worse and increasing the necessity of management of the use and occupation of the ground and keeping the control of the prompt pollution, as punctual as diffuse. There are many studies about Pitimbu River Basin, however they summarize themselves to some months or even in a few years. This work, that gathers these information, increasing the amplitude and making possible an evaluation of the attitude of the water in a period extended for an evaluation of values of variable quality of water referring to the standards, that usually happens about the variable frequency distribution, central tendency and measures of dispersion, as the coefficient of variation, coefficient of skewness and the coefficient of determination of certain variable on another one. This work to evaluates the quality conditions of the Pitimbu river waters by analyzing thirty five (35) variables Physical, chemical and biological in eight (8) points of water course since 1993 to 2007. Given this situation, all knowledge about the waters quality conditions obtained in this work, is a strong subsidy for management of use and ground occupation, considering the river basin as territorial unit of management, and as the water is public good domain, being a priority human use, It is necessary to guarantee to current and the future generations available water resources in appropriate standards of quality as the established standard and identifying possible reasons of pollution through statistics analysis

Avaliação da qualidade de vida relacionada à saúde de cortadores de cana-de-açúcar nos períodos de entressafra e safra

OBJETIVO: Avaliar a qualidade de vida relacionada à saúde de cortadores de cana-de-açúcar. MÉTODOS: Estudo longitudinal em uma usina sucroalcooleira no Oeste do estado de São Paulo de abril (final da entressafra) a outubro (final da safra) de 2010. Foram avaliados 44 cortadores de cana-de-açúcar tabagistas e não tabagistas em três períodos: ao final da entressafra, no fim do terceiro mês de safra e no final da safra. A qualidade de vida relacionada à saúde foi avaliada pelo questionário Medical Outcomes Study 36-Item Short-Form Health Survey (SF-36). Foram realizados análise de variância para medidas repetidas e teste de Friedman para comparar a qualidade de vida entre os períodos. Utilizou-se o teste de Goodman para identificar a frequência dos trabalhadores cujo escore aumentou nos períodos de safra em comparação com a entressafra (respondedores positivos), considerando-se as variáveis qualitativas dos domínios do SF-36. RESULTADOS: Ao final da entressafra, 23% dos trabalhadores desistiram do trabalho; 27% eram tabagistas. Houve decréscimo significativo no domínio vitalidade no final da safra em comparação com a entressafra. Os desistentes apresentaram maior escore no domínio aspecto social em relação ao grupo que permaneceu no trabalho. Não houve diferença na qualidade de vida relacionada à saúde entre tabagistas e não tabagistas. No entanto, observou-se maior percentual de respondedores positivos entre não tabagistas nos domínios aspecto físico, social e emocional nos três meses de safra e nos domínios estado geral de saúde e aspecto social nos seis meses de safra, quando comparados aos tabagistas. CONCLUSÕES: A qualidade de vida relacionada à saúde em cortadores de cana-de-açúcar mostrou-se diminuída após o período de safra no domínio vitalidade. Os trabalhadores que permaneceram na safra são os que apresentaram piores aspectos sociais, o que mostra a necessidade de promoção de políticas assistencialistas de saúde a essa população específica, principalmente durante a safra canavieira.

Controles físico, físico-químico, químico e microbiológico dos frutos de Dimorphandra mollis Benth., Fabaceae

Considerando-se a qualidade dos fitoterápicos, é importante salientar que a preocupação com esta questão inclui rigoroso acompanhamento das diferentes etapas de desenvolvimento e produção, desde a coleta do vegetal até o produto final. O controle de qualidade de drogas vegetais e seus extratos é essencial quando utilizados como matéria-prima para o desenvolvimento de fitoterápicos. Neste trabalho foram utilizadas diversas técnicas (farmacopeicas e não farmacopeicas) visando estabelecer parâmetros de qualidade dos frutos de Dimorphandra mollis Benth. (Leguminosae), popularmente conhecida como faveiro. Os resultados obtidos determinaram as características físico-químicas da droga vegetal e mostraram que o pó dos frutos e o extrato etanólico 70% de D. mollis apresentam um teor de flavonóides de 10,25% e 17,21%, respectivamente. A análise fitoquímica preliminar dos frutos caracterizou a presença de taninos, saponinas e flavonóides. Na análise microbiológica do extrato não houve crescimento de patógenos entre os testes realizados.

Comparação entre os métodos de aplicação de fluido de corte convencional e otimizado na retificação plana de cerâmicas

Com o grande crescimento tecnológico e a necessidade de melhoria, um dos materiais que ganhou uma grande gama na área da engenharia mecânica é a cerâmica, pois possui vantagens físico-químicas e propriedades mecânicas significativas sobre o aço. Entretanto, sua usinagem é um processo difícil e delicado, que requer ainda uma grande atenção em relação ao seu estudo. Assim, o processo de retificação é um dos métodos que tem apresentado bons resultados, porém um grande problema acerca de tal processo é o uso excessivo de fluidos de corte, o que se tornou uma preocupação mundial, já que os fluidos apresentam graves problemas socioambientais, além disso, o fluido de corte é responsável por uma grande parte do custo final do processo, provocando, desse modo, um grande interesse em pesquisas referentes a métodos alternativos de forma a reduzir o consumo e melhorar as características do fluido de corte utilizado. Este trabalho visa comparar duas técnicas de lubri-refrigeração, o método convencional e a Lubrificação Otimizada. O uso do método otimizado é uma alternativa à diminuição do volume de fluido utilizado, já que este tem como princípio a aplicação de uma menor quantidade de fluido de corte com uma alta velocidade, localmente aplicada, ou seja, com essa redução benefícios ambientais e socioeconômicas são obtidos. A análise do trabalho será feita a partir da avaliação das variáveis de saída do processo de retificação plana tais como o comportamento rugosidade e desgaste do rebolo, já que por elas é possível avaliar o processo em relação a qualidade da peça versus custo. Com essas analises, pretende-se avaliar se a técnica otimizada é viável a substituição da refrigeração convencional na retificação plana de cerâmicas.

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Rotação de culturas e propriedades físicas e químicas em Latossolo Vermelho de Cerrado sob preparo convencional e semeadura direta em adoção

O manejo inadequado do solo tem promovido a degradação de suas propriedades físicas, químicas e biológicas. O objetivo deste trabalho foi avaliar, após três anos da instalação de sistemas de manejo do solo, os efeitos da rotação com adubo verde, soja ou milho (verão) e feijão de inverno, sendo utilizadas as seguintes espécies na adubação verde: mucuna-preta, milheto, crotalária e guandu, nas propriedades físicas e químicas de um Latossolo Vermelho distroférrico e na produtividade das culturas. Outro tratamento foi adicionado como alternativa à adubação verde, o pousio. Os sistemas de manejo do solo foram: semeadura direta não consolidada e preparo convencional. O estudo foi realizado em Selvíria-MS, no ano agrícola de 1999/2000. O delineamento experimental foi em blocos casualizados com parcelas subdivididas e quatro repetições. O sistema de semeadura direta, após três anos de instalada a rotação, degradou mais as propriedades físicas do solo na camada superficial. Por outro lado, neste sistema e camada de solo, houve acréscimo no teor de matéria orgânica e no pH, bem como na produtividade do milho, superior à do sistema de preparo convencional. O feijão em rotação à cultura do milho, na semeadura convencional, e em rotação à soja, na semeadura direta, foi a melhor opção quanto à produtividade.

Efeito da adubação verde e época de semeadura de cultivares de feijão, sob sistema plantio direto, em região de cerrado

Cover crops are used for the purpose of land cover in order to improve the physical, chemical and biological properties of cultivated soils and improve the sustainability of grain production. The objective of this study was to evaluate the effect of different cover crops and the sowing of beans on the characteristics of three cultivars of commom bean in no tillage sistem. The research was develop in Fazenda de Ensino Pesquisa da Faculdade de Engenharia-UNESP-Campus de Ilha Solteira. The experimental design was completely randomized blocks and treatments were arranged in bands in 5x2x3 factorial design with four replications. The treatments consisted of cover crops (millet, jack bean, sunn hemp, velvet bean and fallow), sowing of beans (Perola, IAC Tuna, Carioca Precoce) grown in two years. Were evaluated: the final stand of plants, number of pods per plant, number of seeds per pod and per plant, weight of 100 seeds and seed yield. The cover crops sunn hemp and millet showed higher amount of fresh biomass in both years of cultivation, being recommended for our region. Occurring variations in the productivity of seeds depending on the years of cultivation, but the IAC Tuna was more stable in the variables analyzed.

Caracterização físico-química de farinhas de mandioca de diferentes localidades do Brasil

A farinha de mandioca (Manihot esculenta Crantz) é produzida em diferentes regiões do Brasil e faz parte do hábito alimentar do brasileiro. Caracteriza-se num alimento de alto valor energético, possui teor elevado de amido, contém fibras e alguns minerais como potássio, cálcio, fósforo, sódio e ferro. Entre os diferentes estados, os do Norte e Nordeste consomem quantidades de farinha de mandioca bem maiores que os demais. Frente à importância econômica e nutricional deste produto, com o presente trabalho, objetivou-se caracterizar farinhas de mandioca de diferentes estados do País, esperando com isso fornecer informações referentes à composição e às características físico-químicas do produto, tanto para as indústrias produtoras quanto aos consumidores. Os resultados obtidos mostraram que, quanto à composição centesimal, as farinhas analisadas diferem entre si e entre as regiões produtoras, inclusive para classificações de mesmo grupo e subgrupo. Para proteínas e acidez, as farinhas não estão de acordo com os limites da legislação. As farinhas apresentam teores baixos a moderados de fibras, contudo, devido ao seu amplo consumo, contribui como importante fornecedor de fibras na alimentação. A classificação de algumas farinhas quanto à cor não está de acordo com as análises de seus componentes de cromaticidade.

The effect of the land use on phytoplankton assemblages of a Cerrado stream (Brazil)

OBJETIVO: Nosso objetivo foi investigar se o uso do solo do ambiente terrestre adjacente influencia a estrutura das assembleias fitoplanctônicas (composição, riqueza, diversidade e abundância) e biomassa (clorofila-a) em um riacho de Cerrado durante diferentes períodos do ano. MÉTODOS: Os trabalhos de campo foram realizados trimestralmente durante dois anos. RESULTADOS: As variáveis físico-químicas que melhor indicaram as diferenças nas condições da água foram condutividade, oxigênio dissolvido e transparência. Também houve um notável aumento na concentração de nitrogênio, fósforo e material em suspensão na água durante o verão devido aos efeitos da pluviosidade. As assembleias fitoplanctônicas foram compostas por 64 espécies. Cryptophyceae foi o grupo mais abundante, seguido por Bacillariophyceae. Para ambos os anos, a riqueza e a diversidade foram maiores durante a primavera e no outono, enquanto que a abundância do fitoplâncton e a concentração de clorofila-a foram mais elevados durante o outono e verão. A análise de agrupamento e a analise de correspondência canônica mostraram que a sazonalidade e o uso do solo são fatores importantes na estruturação das assembleias ao longo do ano. As alterações nas assembleias fitoplanctônicas ocorreram provavelmente em função da variação na intensidade e freqüência da mistura da água e da entrada de nutrientes oriundo do sistema terrestre adjacente para o aquático. CONCLUSÃO: A estrutura das assembleias fitoplanctônicas mostrou ser altamente influenciada pelo uso do solo, corroborando com a hipótese inicial do trabalho.

Produção de geléia de jambolão (Syzygium cumini Lamarck): processamento, parâmetros físico - químicos e avaliação sensorial

A fruta jambolão (Syzygium cumini Lamarck) é uma fruta de coloração roxa intensa e sabor agradável. Dado que não há na literatura nenhum relato de seu aproveitamento industrial, a produção de geléia de jambolão tornou-se uma interessante atividade de pesquisa. Este trabalho objetivou a elaboração e a avaliação das características físico-químicas e sensoriais da geléia obtida do jambolão. A fruta apresentou a seguinte composição química: cinzas, 0,34%; lipídeos, 0,30%; proteínas, 0,67%; carboidratos, 10,07%; fibras, 0,28%; umidade, 87,75%; frutose, 0,4%; glicose, 0,6%; antocianinas totais, 0,276%; substâncias pécticas, 0,245%; acidez titulável, 5,91%; sólidos solúveis, 9,00%; e pH, 3,9. A geléia obtida apresentou a seguinte composição: açúcares redutores, 20,99%; não-redutores, 18,01%; açúcares totais, 39,00%; pH, 3,42; sólidos solúveis, 67ºBrix; acidez titulável, 5,47%; e umidade, 29,63%. A análise sensorial foi realizada por uma equipe de 50 provadores não treinados que avaliaram os atributos cor, aparência, odor, textura, sabor e avaliação global, pelo método de escala hedônica com nove pontos. Os resultados obtidos mostraram que o atributo cor foi o que mais agradou aos provadores, o atributo odor foi o menos apreciado. em conclusão, o estudo de análise sensorial revelou uma aceitação satisfatória da geléia de jambolão.