Calcaneal Tendon Regions Exhibit Different MMP-2 Activation After Vertical Jumping and Treadmill Running

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vertical migration of Haemonchus contortus third stage larvae on Brachiaria decumbens grass

The present study aimed at evaluating the vertical migration of Haemonchus contortus third stage larvae (1-3) on Brachiaria decumbens grass, as well as at verifying whether larval numbers on pasture varies over the day due to climatic conditions. Feces containing H. contortus L3 were deposited on the soil in the middle of herbage which was initially 30 cm high. Seven days later, samples of different herbage strata (0-10, 10-20 and >20 cm), remaining feces and a layer of approximately 1 cm soil were collected. Tests were carried out in four periods: September 2006, December 2006, March 2007, and June 2007. Samples were collected at sunrise, mid-day, sunset, and mid-night. The humidity and temperature conditions observed in different months influenced larval migration from the feces to the grass. In September, December and March, it rained after fecal deposition on pasture, which favored migration of larvae from the feces to the herbage. Conversely, in June 2007, when there was no rainfall after fecal deposition and temperatures were lower, L3 were mainly recovered from feces. As regards the vertical migration of larvae, the numbers of H. contortus L3 in the forage strata remained relatively constant over the day. This indicates there is not a determined period in which sheep on pasture are at higher risk of infection. Finally, in all collection periods a considerable amount of third stage larvae was observed on the herbage top, which is the first plant part consumed by sheep. (C) 2008 Elsevier B.V. All rights reserved.

Espectro e distribuição vertical das estratégias de dispersão de diásporos do componente arbóreo em uma floresta estacional no sul do Brasil

A dispersão de diásporos é um evento de elevada importância para as espécies vegetais, que dispõem de diversas estratégias para este fim. O presente estudo teve por objetivos conhecer e caracterizar o espectro das diferentes estratégias de dispersão do componente arbóreo em uma floresta estacional de Santa Maria, Rio Grande do Sul, Brasil (próximo às coordenadas 53º54'W e 29º38'S) e, a partir desses dados, investigar sua relação com os estratos verticais da floresta. Foram amostrados todos os indivíduos com perímetro à altura do peito > 15 cm, em 100 unidades amostrais de 10×10 m. A caracterização das estratégias de dispersão foi realizada por meio de observações a campo de frutos e potenciais dispersores, e consulta à bibliografia especializada. Foram amostradas 58 espécies pertencentes a 26 famílias botânicas. Dessas espécies, 74% apresentaram estratégia de dispersão zoocórica; 24%, estratégia de dispersão anemocórica e apenas Gymnanthes concolor Spreng. apresentou a estratégia autocórica. Analisando-se a proporção das estratégias de dispersão por meio da densidade relativa, verificou-se que 80% dos indivíduos são zoocóricos, 12% anemocóricos e 8% autocóricos. Para a floresta analisada foram encontradas diferenças significativas nos padrões de distribuição vertical das espécies agrupadas de acordo com a estratégia de dispersão. A zoocoria ocorreu em espécies de todos os estratos, enquanto a autocoria ficou limitada ao sub-bosque. Já a anemocoria foi mais importante entre as espécies com indivíduos emergentes.

Horizontal and vertical tree community structure in a lowland atlantic rain forest, southeastern Brazil

A estrutura horizontal e vertical do componente arbóreo foi investigada em um trecho de Floresta Atlântica baixo-montana através de um levantamento fitossociológico em dois blocos amostrais de 0,99 ha cada no Parque Estadual Intervales. Todos os indivíduos com DAP > 5 cm foram registrados. Foram amostrados 3.078 indivíduos distribuídos em 172 espécies. O índice de diversidade de Shannon foi de H' = 3,85 nat.ind.-1. A família Myrtaceae se destacou tanto em número de espécies (38) quanto em número de indivíduos (745) no levantamento. Euterpe edulis Mart. teve o maior valor de importância (33,98%), abrangendo 21,8% do total de indivíduos registrados. O índice de similaridade quantitativo foi maior do que o qualitativo, mostrando pouca variação estrutural entre os blocos amostrais, mas a grande quantidade de espécies pouco abundantes, resultou em pronunciadas diferenças florísticas entre eles. Uma análise de correspondência retificada (DCA) gerou três estratos verticais arbitrários. O estrato A (> 26 m) teve a menor densidade e foi bem representado pelas espécies Sloanea guianensis (Aubl.) Benth. e Virola bicuhyba (Schott. ex A.DC.) Warb. O estrato B (8 m < h < 26 m) mostrou a maior riqueza e diversidade florística, e o estrato C (< 8 m) a maior densidade. Euterpe edulis, Guapira opposita (Vell.) Reitz, Garcinia gardneriana (Planch. & Triana) Zappi e Eugenia mosenii (Kausel) Sobral foram bem representadas nos estratos B e C da floresta. A existência de estratos verticais em florestas tropicais é discutida, recomendando-se o uso da DCA para estudos da estratificação vertical em outras florestas tropicais.

Assessing the role of vertical leaves within the photosynthetic function of Styrax camporum under drought conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The fish zonation of the Itanha,m river basin in the Atlantic Forest of southeast Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Manipulation of Rest Period Length Induces Different Causes of Fatigue in Vertical Jumping

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The rating of perceived exertion predicts intermittent vertical jump demand and performance

The aims of this study were (a) to assess the ability of the rating of perceived exertion (RPE) to predict performance (i.e. number of vertical jumps performed to a fixed jump height) of an intermittent vertical jump exercise, and (b) to determine the ability of RPE to describe the physiological demand of such exercise. Eight healthy men performed intermittent vertical jumps with rest periods of 4, 5, and 6s until fatigue. Heart rate and RPE were recorded every five jumps throughout the sessions. The number of vertical jumps performed was also recorded. Random coefficient growth curve analysis identified relationships between the number of vertical jumps and both RPE and heart rate for which there were similar slopes. In addition, there were no differences between individual slopes and the mean slope for either RPE or heart rate. Moreover, RPE and number of jumps were highly correlated throughout all sessions (r=0.97-0.99; P0.001), as were RPE and heart rate (r=0.93-0.97; P0.001). The findings suggest that RPE can both predict the performance of intermittent vertical jump exercise and describe the physiological demands of such exercise.

Evaluation of an Innovative Critical Power Model in Intermittent Vertical Jump

The aim of this study was to test if the critical power model can be used to determine the critical rest interval (CRI) between vertical jumps. Ten males performed intermittent countermovement jumps on a force platform with different resting periods (4.1 +/- 0.3 s, 5.0 +/- 0.4 s, 5.9 +/- 0.6 s). Jump trials were interrupted when participants could no longer maintain 95% of their maximal jump height. After interruption, number of jumps, total exercise duration and total external work were computed. Time to exhaustion (s) and total external work (J) were used to solve the equation Work = a + b . time. The CRI (corresponding to the shortest resting interval that allowed jump height to be maintained for a long time without fatigue) was determined dividing the average external work needed to jump at a fixed height (J) by b parameter (J/s). in the final session, participants jumped at their calculated CRI. A high coefficient of determination (0.995 +/- 0.007) and the CRI (7.5 +/- 1.6 s) were obtained. In addition, the longer the resting period, the greater the number of jumps (44 13, 71 28, 105 30, 169 53 jumps; p<0.0001), time to exhaustion (179 +/- 50, 351 +/- 120, 610 +/- 141, 1,282 +/- 417 s; p<0.0001) and total external work (28.0 +/- 8.3, 45.0 +/- 16.6, 67.6 +/- 17.8, 111.9 +/- 34.6 kJ; p<0.0001). Therefore, the critical power model may be an alternative approach to determine the CRI during intermittent vertical jumps.

Bromeliad architectural complexity and vertical distribution predict spider abundance and richness

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fresh-frozen human bone allograft in vertical ridge augmentation: clinical and tomographic evaluation of bone formation and resorption

The aim of the current study is to evaluate fresh-frozen human bone allografts (FHBAs) used in vertical ridge augmentation clinically and by computed tomography, and to analyze the resulting bone formation and graft resorption. Sixteen FHBAs were grafted in the maxillae and mandibles of 9 patients. The FHBAs, which were provided by the Musculoskeletal Tissue Bank of Marilia Hospital (Unioss), were frozen at -80A degrees C. After 7 months, dental implants were placed and bone parameters were evaluated. Vertical bone formation was measured by computerized tomography before (T0) and at 7 months (T1) after the surgical procedure. Bone graft resorption was measured clinically from a landmark screw head using a periodontal probe. The results were analyzed by Student's t-test. Significant differences existed in the bone formation values at T0 and T1, with an average change of 4.03 +/- A 1.69 mm. Bone graft resorption values were 1.0 +/- A 0.82 mm (20%). Implants were placed with varying insertion torque values (35-45 Ncm), and achieved primary stability. This study demonstrates that FHBAs promote satisfactory vertical bone formation with a low resorption rates, good density, and primary implant stability.

Vertical Bone Augmentation Using a Polytetrafluoroethylene Nonporous Barrier for Osseointegrated Implants Partially Inserted in Tibiae of Rabbits

Purpose: The aim of this study was to evaluate the possibility of obtaining guided bone regeneration using a poly-tetrafluoroethylene (PTFE) nonporous barrier for 2 endosseous implants, partially inserted in tibiae of rabbits.Materials and Methods: Histologic characteristics of the interface between titanium implants (one group with titanium plasma-coated implants and the other group with acid-treated surfaces) and of the regenerated bone were also studied. Twenty screw-vent implants were placed in tibiae of 5 male New Zealand rabbits, 2 at the right side and 2 at the left side, protruding 3 mm from the bone level, to create a horizontal bone defect. At the experimental group the implants were with a PTFE nonporous barrier, whereas no barriers were used in contralateral implants. Animals were sacrificed 3 months after surgery and biopsy specimens were evaluated histologically and histomorphometrically under light microscopy. Student's t test was used for statistical analysis.Results: The histologic measurements showed a mean gain in bone height of 2.15 and 2.42 mm for the barrier group and 1.95 and 0.43 mm for the control group, for the titanium plasma-spray and acid-treated implant surfaces, respectively.Conclusion: The results of the investigation revealed that the placement of implants protruding 3 nun from crestal bone defects may result in vertical bone augmentation using a nonporous PTFE barrier. (Implant Dent 2009;18:182-191)

Method for determination of vertical bar U(e)3 vertical bar in neutrino oscillation appearance experiments

We point out that determination of the MNS matrix element \U-e3\ = s(13) in long-baseline nu(mu) --> nu(e) neutrino oscillation experiments suffers from large intrinsic uncertainty due to the unknown CP violating phase delta and sign of Deltam(13)(2). We propose a new strategy for accurate determination of theta(13); tune the beam energy at the oscillation maximum and do the measurement both in neutrino and antineutrino channels. We show that it automatically resolves the problem of parameter ambiguities which involves delta, theta(13), and the sign of Deltam(13)(2). (C) 2002 Elsevier B.V. B.V. All rights reserved.

Evidence for production of single top quarks and first direct measurement of vertical bar V-tb vertical bar

The D0 Collaboration presents first evidence for the production of single top quarks at the Fermilab Tevatron < p(p)over bar > collider. Using a 0.9 fb(-1) dataset, we apply a multivariate analysis to separate signal from background and measure sigma(< p(p)over bar >-> tb+X,tqb+X)=4.9 +/- 1.4 pb. The probability to measure a cross section at this value or higher in the absence of a signal is 0.035%, corresponding to a 3.4 standard deviation significance. We use the cross section measurement to directly determine the Cabibbo-Kobayashi-Maskawa matrix element that describes the Wtb coupling and find 0.68 <vertical bar V-tb vertical bar <= 1 at 95% C.L. within the standard model.

Measurements of single top quark production cross sections and vertical bar V-tb vertical bar in p(p)over-bar collisions at root s=1.96 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)