Enhanced depth imaging optical coherence tomography of congenital cavitary optic disc anomaly (CODA).

AIM To report the finding of extension of the 4th hyper-reflective band and retinal tissue into the optic disc in patients with cavitary optic disc anomalies (CODAs). METHODS In this observational study, 10 patients (18 eyes) with sporadic or autosomal dominant CODA were evaluated with enhanced depth imaging optical coherence tomography (EDI-OCT) and colour fundus images for the presence of 4th hyper-reflective band extension into the optic disc. RESULTS Of 10 CODA patients (18 eyes), five patients (8 eyes) showed a definite 4th hyper-reflective band (presumed retinal pigment epithelium (RPE)) extension into the optic disc. In these five patients (seven eyes), the inner retinal layers also extended with the 4th hyper-reflective band into the optic disc. Best corrected visual acuity ranged from 20/20 to 20/200. In three patients (four eyes), retinal splitting/schisis was present and in two patients (two eyes), the macula was involved. In all cases, the 4th hyper-reflective band extended far beyond the termination of the choroid into the optic disc. The RPE extension was found either temporally or nasally in areas of optic nerve head excavation, most often adjacent to peripapillary pigment. Compared with eyes without RPE extension, eyes with RPE extension were more myopic (mean dioptres -0.9±2.6 vs -8.8±5, p=0.043). CONCLUSIONS The RPE usually stops near the optic nerve border separated by a border tissue. With CODA, extension of this hyper-reflective band and retinal tissue into the disc is possible and best evaluable using EDI-OCT or analogous image modalities. Whether this is a finding specific for CODA, linked to specific gene loci or is also seen in patients with other optic disc abnormalities needs further evaluation.

Simulation techniques for design of overhead conductor rail lines for speeds over 140 km/h

In overhead conductor rail lines, aluminium beams are usually mounted with support spacing between 8 and 12 meters, to limit the maximum vertical deflection in the center of the span. This small support spacing limits the use of overhead conductor rail to tunnels, therefore it has been used almost exclusively in metropolitan networks, with operation speeds below 110 km/h. Nevertheless, due to the lower cost of maintenance required for this electrification system, some railway administrations are beginning to install it in some tunnels on long-distance lines, requesting higher operation speeds [1]. Some examples are the Barcelona and Madrid suburban networks (Spain), and recent lines in Turkey and Malaysia. In order to adapt the design of the overhead conductor for higher speeds (V > 160 km/h), particular attention must be paid to the geometry of the conductor rail in critical zones as overlaps, crossings and, especially, transitions between conductor rail and conventional catenary, since the use of overhead conductor rail is limited to tunnels, as already mentioned. This paper describes simulation techniques developed in order to take into account these critical zones. Furthermore, some specific simulations results are presented that have been used to analyze and optimizes the geometry of this special zones to get a better current collection quality, in a real suburban network. This paper presents the work undertaken by the Railways Technology Research Centre (CITEF), having over 10 years of experience in railways research [1-4].

Experiences on using closed-loop control systems for smoke control

The main objective of ventilation systems in case of fire is the reduction of the possible consequences by achieving the best possible conditions for the evacuation of the users and the intervention of the emergency services. In the last years, the required quick response of the ventilation system, from normal to emergency mode, has been improved by the use of automatic and semi-automatic control systems, what reduces the response times through the support to the operators decision taking, and the use of pre-defined strategies. A further step consists on the use of closedloop algorithms, which takes into account not only the initial conditions but their development (air velocity, traffic situation, etc), optimizing the quality of the smoke control process

Optimización de la producción de la fase de avance en el túnel de Seiró (Ourense)

Este proyecto desarrolla una metodología de toma de datos y análisis para la optimización de la producción de la fase de avance de construcción del túnel de Seiró. Este túnel forma parte de las obras de construcción de la línea ferroviaria de alta velocidad corredor norte-noroeste a su paso por la provincia de Ourense. Mediante el análisis de diversos parámetros del diseño de la voladura, en la construcción de un túnel de 73 m2 de sección, en roca granítica, se pretende optimizar el tiempo de ciclo de excavación. Se estudia la variación de la fragmentación, el contorno y el avance obtenido y la influencia sobre estos parámetros del esquema de tiro y el tipo de cuele empleados y sus repercusiones en el tiempo de ciclo. El resultado del análisis concluye que el esquema de tiro óptimo, entre los usados, está formado por 112 barrenos de 51 mm de diámetro, con un cuele de 4 barrenos vacíos, que da lugar a mejores resultados de avance, contorno y fragmentación sin afectar negativamente al tiempo de ciclo. ABSTRACT This project develops a methodology for excavation cycle optimization by collecting and analyzing operational data for Seiró Tunnel construction site. This tunnel is included in construction project of high speed railway, located in N-NW direction, in Ourense province. Analyzing several blasting design parameters from the construction of a 73 m2 tunnel, in granitic rock, allows the optimization of cycle time. Variations in fragmentation, contour and advance length and influence about those parameters from blasting design und cut type used and its impact in the cycle time. Analysis results show up the best blasting design, among used, is formed of 112 holes 51 mm diameter, and a parallel cut with 4 empty holes. This configuration achieves the best fragmentation, contour and advance length without negative effects in time cycle

Components of a Wind Tunnel Balance: Design and Calibration

Components of a Wind Tunnel Balance: Design and Calibration

Measurement of Distributed Antenna Systems at 2.4 GHz in a Realistic Subway Tunnel Environment.

Accurate characterization of the radio channel in tunnels is of great importance for new signaling and train control communications systems. To model this environment, measurements have been taken at 2.4 GHz in a real environment in Madrid subway. The measurements were carried out with four base station transmitters installed in a 2-km tunnel and using a mobile receiver installed on a standard train. First, with an optimum antenna configuration, all the propagation characteristics of a complex subway environment, including near shadowing, path loss,shadow fading, fast fading, level crossing rate (LCR), and average fade duration (AFD), have been measured and computed. Thereafter, comparisons of propagation characteristics in a double-track tunnel (9.8-m width) and a single-track tunnel (4.8-m width) have been made. Finally, all the measurement results have been shown in a complete table for accurate statistical modeling.

Modelización del registro y proceso de datos espectrales, referidos a superficies líticas, en un ámbito arqueológico.

La determinación del origen de un material utilizado por el hombre en la prehistoria es de suma importancia en el ámbito de la arqueología. En los últimos años, los estudios de procedencia han utilizado técnicas que suelen ser muy precisas pero con el inconveniente de ser metodologías de carácter destructivo. El fenómeno de la minería a gran escala es una de las características que acompaña al Neolítico, de ahí que la revolución correspondiente a este periodo sea una de las etapas más importantes para la humanidad. El yacimiento arqueológico de Casa Montero es una mina de sílex neolítica ubicada en la Península Ibérica, de gran importancia por su antigüedad y su escala productiva. Este sitio arqueológico corresponde a una cantera de explotación de rocas silícicas desarrollada en el periodo neolítico en la que solamente se han encontrado los desechos de la extracción minera, lo cual incrementa la variabilidad de las muestras analizadas, de las que se desconoce su contexto económico, social y cultural. Es de gran interés arqueológico saber por qué esos grupos neolíticos explotaban de forma tan intensiva determinados tipos de material y cuál era el destino de la cadena productiva del sílex. Además, por ser una excavación de rescate, que ha tenido que procesar varias toneladas de material, en un tiempo relativamente corto, requiere de métodos expeditivos de clasificación y manejo de dicho material. Sin embargo,la implementación de cualquier método de clasificación debe evitar la alteración o modificación de la muestra,ya que,estudios previos sobre caracterización de rocas silícicas tienen el inconveniente de alterar parcialmente el objeto de estudio. Por lo que el objetivo de esta investigación fue la modelización del registro y procesamiento de datos espectrales adquiridos de rocas silícicas del yacimiento arqueológico de Casa Montero. Se implementó la metodología para el registro y procesamiento de datos espectrales de materiales líticos dentro del contexto arqueológico. Lo anterior se ha conseguido con la aplicación de modelos de análisis espectral, algoritmos de suavizado de firmas espectrales, reducción de la dimensionalidad de las características y la aplicación de métodos de clasificación, tanto de carácter vectorial como raster. Para la mayoría de los procedimientos se ha desarrollado una aplicación informática validada tanto por los propios resultados obtenidos como comparativamente con otras aplicaciones. Los ensayos de evaluación de la metodología propuesta han permitido comprobar la eficacia de los métodos. Por lo que se concluye que la metodología propuesta no solo es útil para materiales silícicos, sino que se puede generalizar en aquellos procesos donde la caracterización espectral puede ser relevante para la clasificación de materiales que no deban ser alterados, además, permite aplicarla a gran escala, dado que los costes de ejecución son mínimos si se comparan con los de métodos convencionales. Así mismo, es de destacar que los métodos propuestos, representan la variabilidad del material y permiten relacionarla con el estado del yacimiento, según su contenido respecto de las tipologías de la cadena operativa. ABSTRACT: The determination of the origin of a material used by man in prehistory is very important in the field of archaeology. In recent years the provenance studies have used techniques that tend to be very precise but with the drawback of being destructive methodologies. The phenomenon of mining on a large scale is a feature that accompanies the Neolithic period; the Neolithic revolution is one of the most important periods of humanity. The archaeological site of Casa Montero is a Neolithic flint mine located in the Iberian Peninsula of great importance for its antiquity and its scale. This archaeological site corresponds to a quarry exploitation of silicic rocks developed in the Neolithic period, in which only found debris from mining, which increases the variability of the samples analyzed, including their economic, social and cultural context is unknown. It is of great archaeological interest to know why these Neolithic groups exploited as intensive certain types of material and what the final destination of flint was in the productive chain. In addition, being an excavation of rescue that had to process several tons of material in a relatively short time requires expeditious methods of classification and handling of the material. However, the implementation of any method of classification should avoid the alteration or modification of the sample, since previous studies on characterization of silicic rocks have the disadvantage of destroying or partially modify the object of study. So the objective of this research wasthe modeling of the registration and processing of acquired spectral data of silicic rocks of the archaeological site of Casa Montero. The methodology implemented for modeling the registration and processing of existing spectral data of lithic materials within the archaeological context, was presented as an alternative to the conventional classification methods (methods destructive and expensive) or subjective methods that depend on the experience of the expert. The above has been achieved with the implementation of spectral analysis models, smoothing of spectral signatures and the dimensionality reduction algorithms. Trials of validation of the proposed methodology allowed testing the effectiveness of the methods in what refers to the spectral characterization of siliceous materials of Casa Montero. Is remarkable the algorithmic contribution of the signal filtering, improve of quality and reduction of the dimensionality, as well the proposal of using raster structures for efficient storage and analysis of spectral information. For which it is concluded that the proposed methodology is not only useful for siliceous materials, but it can be generalized in those processes where spectral characterization may be relevant to the classification of materials that must not be altered, also allows to apply it on a large scale, given that the implementation costs are minimal when compared with conventional methods.

Diminished UV-absorbing nets reduce the Spreads and population density of Macrosiphum euphorbiae in lettuce.

UV-absorbing covers reduce the incidence of injurious insect pests and viruses in protected crops. In the present study, the effect of a UV-absorbing net (Bionet) on the spatio-temporal dynamics of the potato aphid on lettuce plants was evaluated. A field experiment was conducted during three seasons in two identical tunnels divided in four plots. A set of lettuce plants were artificially infested with Macrosiphum euphorbiae adults and the population was estimated by counting aphids on every plant over 7 to 9 weeks. Insect population grew exponentially but a significantly lower aphid density was present on plants grown under the UV-absorbing cover compared to a standard 50 mesh net. Similarly, in laboratory conditions, life table parameters were significantly reduced under the Bionet. Moreover, SADIE analysis showed that the spatial distribution of aphids was effectively limited under the UV-absorbing nets. Our results indicate that UV-absorbing nets should be considered as an important component of lettuce indoor cropping systems preventing pesticide applications and reducing the risk of spread of aphid-borne virus diseases.

The function of the secondary lining in the New Austrian Tunnelling Method

The decision to build the Secondary Lining in Route Tunnels which are perforated using the New Austrian Tunnelling Method does not generally depend on reasons of structural strength. The paper discusses the implications of the issue as well as the pros and cons of the current alternative courses of action.

Flying capacity of Psyttalia concolor and Chrysoperla carnea under a UV-absorbing net (Bionet®) in presence and absence of crop.

Field studies were conducted in walk-in tunnels to determine the flying capacity in the presence and absence of crop, of the parasitoid Psyttalia concolor and the predator Chrysoperla carnea under a UV-absorbent net (Bionet®). Yellow sticky cards were used for insect recovery but neither P. concolor nor C. carnea were very attracted to them, thus captures were too low to permit any meaningful comparisons. Bionet® did not seem to affect the mobility of any natural enemy irrespective of the trap location and monitoring hour. Climatic conditions inside nets were very extreme (average temperatures very high and relative humidity very low) threatening insect survival. New experiments are being developed, trying to find new attractants that permit a significant capture of both natural enemies.

Parallel Algorithms for FE-BE Coupling

When non linear physical systems of infinite extent are modelled, such as tunnels and perforations, it is necessary to simulate suitably the solution in the infinite as well as the non linearity. The finite element method (FEM) is a well known procedure for simulating the non linear behavior. However, the treatment of the infinite field with domain truncations is often questionable. On the other hand, the boundary element method (BEM) is suitable to simulate the infinite behavior without truncations. Because of this, by the combination of both methods, suitable use of the advantages of each one may be obtained. Several possibilities of FEM-BEM coupling and their performance in some practical cases are discussed in this paper. Parallelizable coupling algorithms based on domain decomposition are developed and compared with the most traditional coupling methods.