Design of Transparent Conducting Electrodes and Surface Relief Gratings for Plasmonic Polymer Solar Cells

As the concept of renewable energy becomes increasingly important in the modern society, a considerable amount of research has been conducted in the field of organic photovoltaics in recent years. Although organic solar cells generally have had lower efficiencies compared to silicon solar cells, they have the potential to be mass produced via solution processing. A common polymer solar cell architecture relies on the usage of P3HT (electron donor) and PCBM (electron acceptor) bulk heterojunction. One of the main issues with this configuration is that in order to compensate for the high exciton recombination rate, the photoactive layer is often made very thin (on the order of 100 $%). This results in low solar cell photocurrents due to low absorption. This thesis investigates a novel method of light trapping by coupling surface plasmons at the electrode interface via surface relief gratings, leading to EM field enhancements and increased photo absorption. Experimental work was first conducted on developing and optimizing a transparent electrode of the form &'()/+,/&'() to replace the traditional ITO electrode since the azopolymer gratings cannot withstand the high temperature processing of ITO films. It was determined that given the right thickness profiles and deposition conditions, the MAM stack can achieve transmittance and conductivity similar to ITO films. Experimental work was also conducted on the fabrication and characterization of surface relief gratings, as well as verification of the surface plasmon generation. Surface relief gratings were fabricated easily and accurately via laser interference lithography on photosensitive azopolymer films. Laser diffraction studies confirmed the grating pitch, which is dependent on the incident angle and wavelength of the writing beam. AFM experiments were conducted to determine the surface morphology of the gratings, before and after metallic film deposition. It was concluded that metallic film deposition does not significantly alter the grating morphologies.

Supernova 2013fc in a circumnuclear ring of a luminous infrared galaxy: The big brother of SN 1998S

We present photometric and spectroscopic observations of SN 2013fc, a bright type II supernova (SN) in a circumnuclear star-forming ring in the luminous infrared galaxy ESO 154-G010, observed as part of the Public ESO Spectroscopic Survey of Transient Objects. SN 2013fc is both photometrically and spectroscopically similar to the well-studied type IIn SN 1998S and to the bright type II-L SN 1979C. It exhibits an initial linear decline, followed by a short plateau phase and a tail phase with a decline too fast for ⁵⁶Co decay with full γ -ray trapping. Initially, the spectrum was blue and featureless. Later on, a strong broad (~8000 km s^-1) H α emission profile became prominent. We apply a STARLIGHT stellar population model fit to the SN location (observed when the SN had faded) to estimate a high extinction of A_V = 2.9 ± 0.2 mag and an age of 10⁺³ _-2 Myr for the underlying cluster.We compare the SN to SNe 1998S and 1979C and discuss its possible progenitor star considering the similarities to these events. With a peak brightness of B = -20.46 ± 0.21 mag, SN 2013fc is 0.9 mag brighter than SN 1998S and of comparable brightness to SN 1979C.We suggest that SN 2013fc was consistent with a massive red supergiant (RSG) progenitor. Recent mass loss probably due to a strong RSG wind created the circumstellar matter illuminated through its interaction with the SN ejecta. We also observe a near-infrared excess, possibly due to newly condensed dust.

Imaging TC ed analisi tessiturale: caratterizzazione del parenchima polmonare di pazienti con broncopneumopatia cronica ostruttiva

La caratterizzazione del parenchima polmonare è un aspetto cruciale per l’identificazione dell’enfisema e dell’air trapping in pazienti affetti da broncopneumopatia cronica ostruttiva (BPCO). L’innovazione presente in questo lavoro di tesi è quella di utilizzare a questo scopo l’analisi tessiturale mediante il metodo delle matrici di co-occorrenza su immagini di tomografia computerizzata (TC) acquisite in inspirio ed espirio co-registrate. La co-registrazione che ha portato le immagini acquisite in espirio sullo stesso sistema di riferimento di quelle acquisite in inspirio è avvenuta utilizzando la trasformazione diffeomorfa B-Spline SyN, implementata nel software ANTs, ed è stata applicata sia alle immagini TC che alle features estratte da esse. Dalle matrici di co-occorrenza è stata calcolata la feature Energia, che misura l’uniformità dei livelli di grigio contenuti nell’immagine, e quindi la sua omogeneità. Partendo dal fatto che le aree parenchimali affette da enfisema e air trapping hanno alti livelli di omogeneità dovuti alla presenza dell’aria intrappolata al loro interno, l’idea alla base di questo lavoro è stata quella di identificare queste aree attraverso gli alti valori che l’Energia assume in loro corrispondenza. Sono state quindi stabilite sperimentalmente alcune soglie basate sui valori assunti dall’Energia in inspirio e in espirio. Sulla base di queste il parenchima polmonare è stato clusterizzato in diverse aree identificanti i tessuti sani, quelli affetti da enfisema e quelli affetti dall’air trapping. La clusterizzazione ottenuta è risultata coerente con la reale distribuzione dell’enfisema e dell’air trapping nei pazienti analizzati, dimostrando la validità della tecnica utilizzata e aprendo nuovi scenari futuri alla caratterizzazione del parenchima polmonare in questa patologia.

Inputs from a mercury-contaminated lagoon: impact on the nearshore waters of the Atlantic Ocean

Ria de Aveiro, a Portuguese coastal lagoon that exchanges water with the Atlantic Ocean, received the effluent from a chlor-alkali industry for over 50 years; consequently several tons of mercury had been buried in the sediments of an inner basin. To assess the importance (and seasonal variation) of the lagoon waters as carriers of mercury to the nearby coastal area, we measured total mercury levels in several compartments: in surface sediments, in surface and deep waters (including dissolved and particulate matter!, and in biota. Dissolved (reactive and total) mercury concentrations both in surface and deep waters were low (<1 to 15 ng L '). Mean mercury values in suspended particulate matter varied hetween 0.2 and 0.6 jxg g ' and in sediments between 1 and 9 ng g '. Aquatic organisms displayed levels below regulatory limits but exhibited some bioaccumulation of mercury, with concentrations ranging from 0.05 to 0.8 ^ig g ' Idry weight (dw)|. No seasonal pattern was found in this study for mercury-related determinations. Levels found in the estuary mouth during ebb tide provide evidence for the transport of mercury to the coastal zone. No significant changes in the partition of mercury between dissolved and particulate phases were found in the coastal waters in comparison with the values found in the estuary mouth. In spite of the high levels of mercury found inside some areas of the lagoon, the wide web of islands and channels allows some spreading of contaminants before they reach the coastal waters. Moreover, the low efficiency of local marine sediments in trapping mercury contributes to a dilution of mercury transported in suspended particulate matter over a broader area, reducing the impact in the nearby manne coastal zone.

Photochemical dynamics of laser-irradiated semiconductor nanostructures

Thesis (Ph.D.)--University of Washington, 2016-08

PEDOT:PSS thin films: Applications in Bioelectronics

Owing to their capability of merging the properties of metals and conventional polymers, Conducting Polymers (CPs) are a unique class of carbon-based materials capable of conducting electrical current. A conjugated backbone is the hallmark of CPs, which can readily undergo reversible doping to different extents, thus achieving a wide range of electrical conductivities, while maintaining mechanical flexibility, transparency and high thermal stability. Thanks to these inherent versatility and attracting properties, from their discovery CPs have experienced incessant widespread in a great plethora of research fields, ranging from energy storage to healthcare, also encouraging the spring and growth of new scientific areas with highly innovative content. Nowadays, Bioelectronics stands out as one of the most promising research fields, dealing with the mutual interplay between biology and electronics. Among CPs, the polyelectrolyte complex poly (3,4-ethylenedioxythiophene): poly (styrenesulfonate) (PEDOT:PSS), especially in the form of thin films, has been emphasized as ideal platform for bioelectronic applications. Indeed, in the last two decades PEDOT:PSS has played a key role in the sensing of bioanalytes and living cells interfacing and monitoring. In the present work, development and characterization of two kinds of PEDOT:PSS-based devices for applications in Bioelectronics are discussed in detail. In particular, a low-cost amperometric sensor for the selective detection of Dopamine in a ternary mixture was optimized, taking advantage of the electrocatalytic and antifouling properties that render PEDOT:PSS thin films appealing tools for electrochemical sensing of bioanalytes. Moreover, the potentialities of this material to interact with live cells were explored through the fabrication of a microfluidic trapping device for electrical monitoring of 3D spheroids using an impedance-based approach.

Identification of 1-methyloctyl butanoate as the major sex pheromone component from females of the saddle gall midge, Haplodiplosis marginata (Diptera: Cecidomyiidae)

The saddle gall midge, Haplodiplosis marginata (von Roser) (Diptera: Cecidomyiidae), has undergone a resurgence recently as a pest of cereals in Belgium and other European countries. An effective monitoring tool of saddle gall midge flights is needed to understand the enigmatic population dynamics of this pest, and to design an integrated management strategy. Therefore, volatile compounds emitted by females (alkan-2-ols and alk-2-yl butanoates) were identified, and the chirality of the emitted esters was determined to be the R absolute configuration. In field-trapping experiments, racemic non-2-yl butanoate attracted substantial numbers of H.marginata males. Thus, this compound will be useful in baited traps for monitoring seasonal flight patterns, and improving integrated management of the saddle gall midge in agricultural systems.

Effets directs et indirects de la prédation sur les lemmings dans l’Arctique canadien.

Les populations caractérisées par des fluctuations cycliques ont fasciné et continuent de générer un grand intérêt chez la communauté scientifique en raison de la complexité des facteurs de régulation qui en sont responsables. Plusieurs hypothèses ont été proposées pour expliquer ces fluctuations cycliques mais aucun consensus n’a encore été atteint malgré près de 100 ans de recherche. La disponibilité de la nourriture et les effets sociaux (e.g. interactions compétitives) ont été proposés comme facteurs responsables de cycles de certaines espèces. Toutefois, la prédation est probablement le facteur le plus susceptible de causer des fluctuations cycliques chez les populations fauniques en raison de son effet dépendant de la densité avec délai. Un tandem circulaire de raréfaction et densification des prédateurs et des proies par des effets directs (i.e. mortalités) seraient à l’origine des cycles d’abondance. De plus, de récentes études montrent que les effets indirects (comme le stress) de la prédation pourraient être aussi importants que les effets directs pour générer les fluctuations cycliques. Cette thèse vise à identifier les effets directs et indirects de la prédation qui affectent la population de lemmings bruns de l’Île Bylot, Nunavut, caractérisée par des cycles d’abondance de 3-4 ans. Pour ce faire, nous avons d’abord comparé la plausibilité de l’hypothèse de la limitation par nourriture vis-à-vis l’hypothèse de la prédation en déterminant la chronologie saisonnière des cycles des lemmings. Ensuite, nous avons construit en 2012-2013 une clôture de 9 ha coiffée d’un filet anti-prédateur aviaire dans lequel nous avons piégé les lemmings de 2013 à 2015. Une deuxième grille de trappage sans clôture a été utilisée à des fins de comparaisons. Ces deux grilles étaient actives dès 2008, ce qui nous a permis d’avoir un contrôle pré-expérimental pour les données démographiques (effets directs). En 2014 et 2015, nous avons récolté les fèces des lemmings dans les deux grilles de trappage afin de quantifier les métabolites d’hormones de stress. Une validation de la mesure des métabolites fécales des glucocorticoïdes (i.e. hormones de stress) a été menée afin de mesurer le stress des lemmings de façon non-invasive. Les résultats sont clairs : (1) le déclin des lemmings se produit à la fin de l’été alors que les prédateurs sont au plus fort de leur abondance et pas à la fin de l’hiver, supportant ainsi l’hypothèse de la limitation par la prédation. Nos résultats suggèrent aussi (2) que les lemmings à l’intérieur de la clôture avaient une survie plus élevée qu’à l’extérieur, favorisant ainsi une croissance plus forte de la population. Ensuite, (3) les lemmings ont montré des niveaux de stress plus faibles sans prédation sans toutefois que cela ait un impact sur leur reproduction. À la lumière des résultats de cette thèse et en les comparant avec deux autres études ayant aussi réduit expérimentalement l’abondance des prédateurs dans la toundra arctique, nous pouvons conclure que la prédation est la force trophique dominante de régulation de l’abondance des lemmings. Cette étude montre également que le stress induit par la prédation est insuffisant pour avoir un impact sur la dynamique des lemmings en été, soit pendant la saison où la prédation est maximale. Il est possible que cette absence d’effet soit une réponse adaptative des lemmings pour maintenir une reproduction élevée face à une prédation élevée, et ainsi maximiser leur aptitude phénotypique.

Self-Assembled InAs/GaAs Quantum Dot Solar Cells

Our work focuses on experimental and theoretical studies aimed at establishing a fundamental understanding of the principal electrical and optical processes governing the operation of quantum dot solar cells (QDSC) and their feasibility for the realization of intermediate band solar cell (IBSC). Uniform performance QD solar cells with high conversion efficiency have been fabricated using carefully calibrated process recipes as the basis of all reliable experimental characterization. The origin for the enhancement of the short circuit current density (Jsc) in QD solar cells was carefully investigated. External quantum efficiency (EQE) measurements were performed as a measure of the below bandgap distribution of transition states. In this work, we found that the incorporation of self-assembled quantum dots (QDs) interrupts the lattice periodicity and introduce a greatly broadened tailing density of states extending from the bandedge towards mid-gap. A below-bandgap density of states (DOS) model with an extended Urbach tail has been developed. In particular, the below-bandgap photocurrent generation has been attributed to transitions via confined energy states and background continuum tailing states. Photoluminescence measurement is used to measure the energy level of the lowest available state and the coupling effect between QD states and background tailing states because it results from a non-equilibrium process. A basic I-V measurement reveals a degradation of the open circuit voltage (Voc) of QD solar cells, which is related to a one sub-bandgap photon absorption process followed by a direct collection of the generated carriers by the external circuit. We have proposed a modified Shockley-Queisser (SQ) model that predicts the degradation of Voc compared with a reference bulk device. Whenever an energy state within the forbidden gap can facilitate additional absorption, it can facilitate recombination as well. If the recombination is non-radiative, it is detrimental to solar cell performance. We have also investigated the QD trapping effects as deep level energy states. Without an efficient carrier extraction pathway, the QDs can indeed function as mobile carriers traps. Since hole energy levels are mostly connected with hole collection under room temperature, the trapping effect is more severe for electrons. We have tried to electron-dope the QDs to exert a repulsive Coulomb force to help improve the carrier collection efficiency. We have experimentally observed a 30% improvement of Jsc for 4e/dot devices compared with 0e/dot devices. Electron-doping helps with better carrier collection efficiency, however, we have also measured a smaller transition probability from valance band to QD states as a direct manifestation of the Pauli Exclusion Principle. The non-linear performance is of particular interest. With the availability of laser with on-resonance and off-resonance excitation energy, we have explored the photocurrent enhancement by a sequential two-photon absorption (2PA) process via the intermediate states. For the first time, we are able to distinguish the nonlinearity effect by 1PA and 2PA process. The observed 2PA current under off-resonant and on-resonant excitation comes from a two-step transition via the tailing states instead of the QD states. However, given the existence of an extended Urbach tail and the small number of photons available for the intermediate states to conduction band transition, the experimental results suggest that with the current material system, the intensity requirement for an observable enhancement of photocurrent via a 2PA process is much higher than what is available from concentrated sun light. In order to realize the IBSC model, a matching transition strength needs to be achieved between valance band to QD states and QD states to conduction band. However, we have experimentally shown that only a negligible amount of signal can be observed at cryogenic temperature via the transition from QD states to conduction band under a broadband IR source excitation. Based on the understanding we have achieved, we found that the existence of the extended tailing density of states together with the large mismatch of the transition strength from VB to QD and from QD to CB, has systematically put into question the feasibility of the IBSC model with QDs.

Antarctic icebergs distributions 1992-2014

Basal melting of floating ice shelves and iceberg calving constitute the two almost equal paths of freshwater flux between the Antarctic ice cap and the Southern Ocean. The largest icebergs (>100 km2) transport most of the ice volume but their basal melting is small compared to their breaking into smaller icebergs that constitute thus the major vector of freshwater. The archives of nine altimeters have been processed to create a database of small icebergs (<8 km2) within open water containing the positions, sizes, and volumes spanning the 1992–2014 period. The intercalibrated monthly ice volumes from the different altimeters have been merged in a homogeneous 23 year climatology. The iceberg size distribution, covering the 0.1–10,000 km2 range, estimated by combining small and large icebergs size measurements follows well a power law of slope −1.52 ± 0.32 close to the −3/2 laws observed and modeled for brittle fragmentation. The global volume of ice and its distribution between the ocean basins present a very strong interannual variability only partially explained by the number of large icebergs. Indeed, vast zones of the Southern Ocean free of large icebergs are largely populated by small iceberg drifting over thousands of kilometers. The correlation between the global small and large icebergs volumes shows that small icebergs are mainly generated by large ones breaking. Drifting and trapping by sea ice can transport small icebergs for long period and distances. Small icebergs act as an ice diffuse process along large icebergs trajectories while sea ice trapping acts as a buffer delaying melting.

Solid-liquid interactions in microscale structures and devices

Liquid-solid interactions become important as dimensions approach mciro/nano-scale. This dissertation focuses on liquid-solid interactions in two distinct applications: capillary driven self-assembly of thin foils into 3D structures, and droplet wetting of hydrophobic micropatterned surfaces. The phenomenon of self-assembly of complex structures is common in biological systems. Examples include self-assembly of proteins into macromolecular structures and self-assembly of lipid bilayer membranes. The principles governing this phenomenon have been applied to induce self-assembly of millimeter scale Si thin films into spherical and other 3D structures, which are then integrated into light-trapping photovoltaic (PV) devices. Motivated by this application, we present a generalized analytical study of the self-folding of thin plates into deterministic 3D shapes, through fluid-solid interactions, to be used as PV devices. This study consists of developing a model using beam theory, which incorporates the two competing components — a capillary force that promotes folding and the bending rigidity of the foil that resists folding into a 3D structure. Through an equivalence argument of thin foils of different geometry, an effective folding parameter, which uniquely characterizes the driving force for folding, has been identified. A criterion for spontaneous folding of an arbitrarily shaped 2D foil, based on the effective folding parameter, is thus established. Measurements from experiments using different materials and predictions from the model match well, validating the assumptions used in the analysis. As an alternative to the mechanics model approach, the minimization of the total free energy is employed to investigate the interactions between a fluid droplet and a flexible thin film. A 2D energy functional is proposed, comprising the surface energy of the fluid, bending energy of the thin film and gravitational energy of the fluid. Through simulations with Surface Evolver, the shapes of the droplet and the thin film at equilibrium are obtained. A critical thin film length necessary for complete enclosure of the fluid droplet, and hence successful self-assembly into a PV device, is determined and compared with the experimental results and mechanics model predictions. The results from the modeling and energy approaches and the experiments are all consistent. Superhydrophobic surfaces, which have unique properties including self-cleaning and water repelling are desired in many applications. One excellent example in nature is the lotus leaf. To fabricate these surfaces, well designed micro/nano- surface structures are often employed. In this research, we fabricate superhydrophobic micropatterned Polydimethylsiloxane (PDMS) surfaces composed of micropillars of various sizes and arrangements by means of soft lithography. Both anisotropic surfaces, consisting of parallel grooves and cylindrical pillars in rectangular lattices, and isotropic surfaces, consisting of cylindrical pillars in square and hexagonal lattices, are considered. A novel technique is proposed to image the contact line (CL) of the droplet on the hydrophobic surface. This technique provides a new approach to distinguish between partial and complete wetting. The contact area between droplet and microtextured surface is then measured for a droplet in the Cassie state, which is a state of partial wetting. The results show that although the droplet is in the Cassie state, the contact area does not necessarily follow Cassie model predictions. Moreover, the CL is not circular, and is affected by the micropatterns, in both isotropic and anisotropic cases. Thus, it is suggested that along with the contact angle — the typical parameter reported in literature quantifying wetting, the size and shape of the contact area should also be presented. This technique is employed to investigate the evolution of the CL on a hydrophobic micropatterned surface in the cases of: a single droplet impacting the micropatterned surface, two droplets coalescing on micropillars, and a receding droplet resting on the micropatterned surface. Another parameter which quantifies hydrophobicity is the contact angle hysteresis (CAH), which indicates the resistance of the surface to the sliding of a droplet with a given volume. The conventional methods of using advancing and receding angles or tilting stage to measure the resistance of the micropatterned surface are indirect, without mentioning the inaccuracy due to the discrete and stepwise motion of the CL on micropillars. A micronewton force sensor is utilized to directly measure the resisting force by dragging a droplet on a microtextured surface. Together with the proposed imaging technique, the evolution of the CL during sliding is also explored. It is found that, at the onset of sliding, the CL behaves as a linear elastic solid with a constant stiffness. Afterwards, the force first increases and then decreases and reaches a steady state, accompanied with periodic oscillations due to regular pinning and depinning of the CL. Both the maximum and steady state forces are primarily dependent on area fractions of the micropatterned surfaces in our experiment. The resisting force is found to be proportional to the number of pillars which pin the CL at the trailing edge, validating the assumption that the resistance mainly arises from the CL pinning at the trailing edge. In each pinning-and-depinning cycle during the steady state, the CL also shows linear elastic behavior but with a lower stiffness. The force variation and energy dissipation involved can also be determined. This novel method of measuring the resistance of the micropatterned surface elucidates the dependence on CL pinning and provides more insight into the mechanisms of CAH.

Simulation tools for the analysis of single electronic systems

Developments in theory and experiment have raised the prospect of an electronic technology based on the discrete nature of electron tunnelling through a potential barrier. This thesis deals with novel design and analysis tools developed to study such systems. Possible devices include those constructed from ultrasmall normal tunnelling junctions. These exhibit charging effects including the Coulomb blockade and correlated electron tunnelling. They allow transistor-like control of the transfer of single carriers, and present the prospect of digital systems operating at the information theoretic limit. As such, they are often referred to as single electronic devices. Single electronic devices exhibit self quantising logic and good structural tolerance. Their speed, immunity to thermal noise, and operating voltage all scale beneficially with junction capacitance. For ultrasmall junctions the possibility of room temperature operation at sub picosecond timescales seems feasible. However, they are sensitive to external charge; whether from trapping-detrapping events, externally gated potentials, or system cross-talk. Quantum effects such as charge macroscopic quantum tunnelling may degrade performance. Finally, any practical system will be complex and spatially extended (amplifying the above problems), and prone to fabrication imperfection. This summarises why new design and analysis tools are required. Simulation tools are developed, concentrating on the basic building blocks of single electronic systems; the tunnelling junction array and gated turnstile device. Three main points are considered: the best method of estimating capacitance values from physical system geometry; the mathematical model which should represent electron tunnelling based on this data; application of this model to the investigation of single electronic systems. (DXN004909)

Anisotropic Assembly of Colloidal Nanoparticles: Exploiting Substrate Crystallinity

We show that the crystal structure of a substrate can be exploited to drive the anisotropic assembly of colloidal nanoparticles. Pentanethiol-passivated Au particles of approximately 2 nm diameter deposited from toluene onto hydrogen-passivated Si(111) surfaces form linear assemblies (rods) with a narrow width distribution. The rod orientations mirror the substrate symmetry, with a high degree of alignment along principal crystallographic axes of the Si(111) surface. There is a strong preference for anisotropic growth with rod widths substantially more tightly distributed than lengths. Entropic trapping of nanoparticles provides a plausible explanation for the formation of the anisotropic assemblies we observe.

Organic materials for active layers in transistors: Study of the electrical stability properties

Field effect transistors based on several conjugated organic materials were fabricated and assesed in terms of electrical stability. The device characteristics were studied using steady state measurements as well as techniques for addressing trap states. Temperature-dependent measurements show clear evidence for an electrical instability occurring above 200 K that is caused by an electronic trapping process. It is suggested that the trapping sites are created by a change in the organic conjugated chain, a process similar to a phase transition.

Charge transport in poly(3-methylthiophene) schottky barrier diodes

Schottky-barrier devices were formed from electropolymerised films of poly (3-methylthiophene) (PMeT). Thermal annealing of a partially undoped film led to diodes with rectification ratios as high as 5900 at 1 V and 50,000 at 2.5 V and ideality factors slightly above 2. The temperature dependence of ac loss tangent and forward currents are identical suggesting that bulk effects dominate device behaviour event at very low forward voltages. Below 250 K forward currents are essentially independent of temperature. Preliminary TSC measurements show the presence of at least two trapping levels in the devices. © 1993.