Immunohistochemistry of small blue round cell tumors

Small blue round cell tumors (SBRCTs) are a set of malignancies that have a particular proclivity for the pediatric age group. These tumors are notoriously difficult to distinguish by histologic evaluation alone, and in recent years a number of new immunohistochemical markers have emerged that can aid in the correct categorization of these lesions. Myogenin, a muscle-restricted nuclear transcription factor, has been demonstrated to be a highly sensitive and specific marker of rhabdomyosarcoma, and is superior to previous markers such as myoglobin, muscle actins, and desmin. The FlI-1 gene product is expressed as part of the EWS/FLI-1 novel chimeric protein that results from the t(11;22)(q24;q12) translocation that occurs in approximately two-thirds of cases of PNET/Ewings sarcoma. Immunohistochemical detection of the FLI-1 gene product can thus complement detection of CD99/MIC2 for the positive identification of PNET/Ewings sarcoma. Markers of neuroblastoma include neural markers, such as chromogranin A, neurofilaments, and synaptophysin. Desmoplastic small round cell tumor (DSRCT) is a tumor with an unusual immunophenotype, including co-expression of cytokeratin, vimentin, and desmin; recent studies have also documented the use of antibodies to the WT-1 gene product as a marker of the chimeric EWS/WT-1 protein formed as a result of the t(11;22)(p13;q12) translocation that characterizes this unique tumor. In summary, there now exists a panel of antibodies defining immunohistochemical markers of individual SBRCTs that can identify rhabdomyosarcoma, PNET/Ewings sarcoma, neuroblastoma, and DSRCT with high sensitivity and specificity.

A saúde bucal em pauta: análise de registros dos Conselhos Municipais de Saúde de municípios pertencentes à 17ª Regional de Saúde do Estado do Paraná, Brasil

O presente estudo teve como objetivo a análise das intervenções em saúde bucal, registradas em atas de reuniões, de 15 Conselhos Municipais de Saúde, próprios de municípios pertencentes à 17ª Regional de Saúde do Estado do Paraná. A análise documental deu-se a partir da identificação das temáticas em saúde, com ênfase na categorização por assunto das intervenções em saúde bucal. Os resultados evidenciaram os registros relativos à programação e organização da prestação de serviços, seguida pelo orçamento em saúde, como sendo os mais freqüentes do conjunto de temáticas analisadas. Pôde-se identificar, em 90 atas das 591 estudadas, o total de 134 registros de intervenções em saúde bucal. Por meio da análise desses últimos, percebeu-se que as intervenções em saúde bucal eram relatos de ações já concretizadas, desprovidas de características propositivas quando analisadas sob a dimensão do planejamento em saúde. Sinaliza-se para a necessidade da categoria odontológica de adquirir um maior padrão de representatividade nesses espaços, de forma a possibilitar vínculos importantes no processo de planejamento e de fortalecimento da saúde bucal enquanto direito de cidadania.

Characterization of Five Different Implant Surfaces and Their Effect on Osseointegration: A Study in Dogs

Background: Chemical modification of implant surface is typically associated with surface topographic alterations that may affect early osseointegration. This study investigates the effects of controlled surface alterations in early osseointegration in an animal model.Methods: Five implant surfaces were evaluated: 1) alumina-blasting, 2) biologic blasting, 3) plasma, 4) microblasted resorbable blasting media (microblasted RBM), and 5) alumina-blasting/acid-etched (AB/AE). Surface topography was characterized by scanning electron microscopy and optical interferometry, and chemical assessment by x-ray photoelectron spectroscopy. The implants were placed in the radius of six dogs, remaining 2 and 4 weeks in vivo. After euthanization, specimens were torqued-to-interface failure and non-decalcified - processed for histomorphologic bone-implant contact, and bone area fraction-occupied evaluation. Statistical evaluation was performed by one-way analysis of variance (P < 0.05) and post hoc testing by the Tukey test.Results: The alumina-blasting surface presented the highest average surface roughness and mean root square of the surface values, the biologic blasting the lowest, and AB/AE an intermediate value. The remaining surfaces presented intermediate values between the biologic blasting and AB/AE. The x-ray photoelectron spectroscopy spectra revealed calcium and phosphorus for the biologic blasting and microblasted RBM surfaces, and the highest oxygen levels for the plasma, microblasted RBM, and AB/AE surfaces. Significantly higher torque was observed at 2 weeks for the microblasted RBM surface (P < 0.04), but no differences existed between surfaces at 4 weeks (P > 0.74). No significant differences in bone-implant contact and bone area fraction-occupied values were observed at 2 and 4 weeks.Conclusion: The five surfaces were osteoconductive and resulted in high degrees of osseointegration and biomechanical fixation. J Periodontol 2011;82:742-750.

Titanium surface topography after brushing with fluoride and fluoride-free toothpaste simulating 10 years of use

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tree population and community dynamics in a Brazilian tropical semideciduous forest

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Soil profile, relief features and their relation to structure and distribution of Brazilian Atlantic rain forest trees

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relação entre heterogeneidade ambiental e distribuição de espécies em uma floresta paludosa no Município de Cristais Paulista, SP, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Gap disturbance regime and composition in the Atlantic Montane Rain Forest: the influence of topography

In the Atlantic Montane Rain Forest of south-eastern Brazil, a field study was carried out to describe the forest disturbance regime, analyse canopy gap composition and evaluate the influence of habitat parameters on gap tree species composition. We characterized canopy gaps considering the group of variables as follows: area, type and number of tree/branch falls, topographic position, soil coverage and surrounding canopy trees. Gap composition was assessed at species level by measuring all individuals inside gaps higher than one meter. Mean gap area of the 42 canopy gaps analysed was 71.9 +/- 9.0 m(2) (mean +/- SE). Out of the studied gaps, 35.7% were created by uprooted and by snapped trees, 16.7% by dead-standing trees and 11.9% by the fall of large branches. The disturbance regime was characterized by gap openings predominantly smaller than 150 m(2) and by spatial patterning related to topography. Ridges had smaller gaps and higher proportions of gaps created by branch falls; slopes had bigger gaps generally created by uprooting events. The more abundant and frequent species were shade tolerant and the more species-rich families found inside gaps did not differ from the forest as a whole. Pioneer species were rare and restricted to medium and large size classes. The Indicator Species Analysis and the Canonical Correspondence Analysis indicated gap area, topography and the percentage of soil cover by the genera Calathea and Ctenanthe were the predominant variables correlated with woody species distribution. So, topography emerged as an important issue not only to the gap disturbance regime, but also to gap colonization. In respect to the influence of gap processes on the Atlantic Montane Rain Forest regeneration, our results support the view that canopy gap events may not be working as promoters of community wide floristic shifts.

Neuroimaging in dementias

Purpose of reviewTo critically review data on the use of neuroimaging tools in the clinical diagnostic investigation of dementias.Recent findingsFor many years, the use of neuroimaging tools in the evaluation of dementias has been restricted to excluding neurosurgical lesions that may account for the cognitive decline. However, modern neuroimaging extends beyond this traditional role of excluding other conditions and has a key role in the clinical investigation of Alzheimer's disease and of other degenerative cortical dementias. MRI, PET with fluorodeoxyglucose, and single-photon emission computed tomography are topographic markers of neural damage and enable the identification of specific lesional patterns that characterize Alzheimer's disease and other cortical dementias. More recently, PET amyloid markers have enabled the in-vivo assessment of amyloid load, a key feature in the physiopathology of Alzheimer's disease.SummaryThe combined use of neuroimaging examinations with clinical, neuropsychological, and cerebrospinal fluid markers can improve the specificity of the diagnosis of Alzheimer's disease, even at early stages of the disease. In the following years, progress in research will provide standardized and validated imaging markers of Alzheimer's disease and other dementias, which may increase their application in clinical settings.

Geographical variation in genetic structure of an Atlantic Coastal Forest frog reveals regional differences in habitat stability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modeling a spatially restricted distribution in the Neotropics: How the size of calibration area affects the performance of five presence-only methods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Lobe identity in the Mongolian gerbil prostatic complex: A new rodent model for prostate study

Knowledge of structural and physiological differences among the prostatic lobes (PL) is the basis for development of experimental studies in traditional laboratory rodents. Although Mongolian gerbil reproductive organs have been increasingly investigated, its prostate structure is far from being properly known, and investigations of this organ focused on the ventral lobe (VL). Thus, the present study provides a thorough morphological description of prostatic complex in the male adult gerbil on the basis of topographic, histological, and ultrastructural analysis and ductal branching. Like other rodents, four pairs of PL were observed. However, in contrast to the rat and mouse, the VL is the least voluminous component and the dorsolateral lobe (DLL) is the most prominent and spatially isolated from remaining PL. The occurrence of a dorsal lobe (DL), hidden between bladder and insertion of seminal vesicles, has not been mentioned in previous reports with Mongolian gerbil. Collagenase digestion followed by microdissection revealed that, except for DL, which has a tubularacinar organization, all PL exhibit tubular organization and variable ductal branching. Distinct histological and ultrastructural features such as secretory epithelium, aspect of luminal secretion and stromal organization are reported for each PL and are confirmed by morphometric and stereological methods. Histological sections showed at least three intralobar segments in VL and DL. Ultrastructural analysis evidenced that, although luminal epithelial cells of PL share typical features of exocrine secretory cells, there are striking lobe phenotypical variations. Both merocrine and apocrine pathways are observed in variable rates in all PL, with the predominance of the former in the DLL and the latter in the CG. The morphological observations presented herein point to distinct structural identities for each PL, which probably reflects,specific functional compromise of seminal fluid secretion. These data also point to the gerbil as a good model for investigations concerning the regulation of prostate development and homeostasis, mainly with regard to the dorsal and dorsolateral PL.

Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols

Objectives. This study characterized the feldspathic ceramic surfaces after various silanization protocols.Methods. Ceramic bars (2 mm x 4 mm x 10 mm) (N = 18) of feldpathic ceramic (VM7, VITA Zahnfabrik) were manufactured and finished. Before silane application, the specimens were ultrasonically cleaned in distilled water for 10 min. The ceramic specimens were randomly divided into nine groups (N = 2 per group) and were treated with different silane protocols. MPS silane (ESPE-Sil, 3M ESPE) was applied to all specimens and left to react at 20 degrees C for 2 min (G20). After drying, the specimens were subjected to heat treatment in an oven at 38 degrees C (G38), 79 degrees C (G79) or 100 degrees C (G100) for 1 min. Half of the specimens of each group were rinsed with water at 80 degrees C for 15 s (G20B, G38B, G79B, G100B). The control group (GC) received no silane. Attenuated total reflection infrared Fourier transform analysis (ATR FT-IR) was performed using a spectrometer. Thickness of silane layer was measured using a spectroscopic ellip-someter working in the lambda = 632.8 nm (He-Ne laser) at 70 degrees incidence angle. Surface roughness was evaluated using an optical profilometer. Specimens were further analyzed under the Scanning Electron Microscopy (SEM) to observe the topographic patterns.Results. ATR FT-IR analysis showed changes in Si-O peaks with enlarged bands around 940 cm(-1). Ellipsometry measurements showed that all post-heat treatment actions reduced the silane film thickness (30.8-33.5 nm) compared to G20 (40 nm). The groups submitted to rinsing in hot water (B groups) showed thinner silane films (9.8-14.4 nm) than those of their corresponding groups (without washing) (30.8-40 nm). Profilometer analysis showed that heat treatments (Ra approximate to 0.10-0.19 mu m; Rq approximate to 0.15-0.26 mu m) provided a smoother surface than the control group (Ra approximate to 0.48 mu m; Rq approximate to 0.65 mu m). Similar patterns were also observed in SEM images.Significance. Heat treatment after MPS silane application improved the silane layer network. Rinsing with boiling water eliminated the outmost unreacted regions of the silane yielding to thinner film thicknesses. (C) 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Phase-Locked loops lock-in range in Frequency Modulated-Atomic Force Microscope nonlinear control system

Since the mid 1980s the Atomic Force Microscope is one the most powerful tools to perform surface investigation, and since 1995 Non-Contact AFM achieved true atomic resolution. The Frequency-Modulated Atomic Force Microscope (FM-AFM) operates in the dynamic mode, which means that the control system of the FM-AFM must force the micro-cantilever to oscillate with constant amplitude and frequency. However, tip-sample interaction forces cause modulations in the microcantilever motion. A Phase-Locked loop (PLL) is used to demodulate the tip-sample interaction forces from the microcantilever motion. The demodulated signal is used as the feedback signal to the control system, and to generate both topographic and dissipation images. As a consequence, a proper design of the PLL is vital to the FM-AFM performance. In this work, using bifurcation analysis, the lock-in range of the PLL is determined as a function of the frequency shift (Q) of the microcantilever and of the other design parameters, providing a technique to properly design the PLL in the FM-AFM system. (C) 2011 Elsevier B.V. All rights reserved.

Remote sensing analysis of depositional landforms in alluvial settings: Method development and application to the Taquari megafan, Pantanal (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)