Timing and trajectory in rhythm production

The Wing-Kristofferson movement timing model (A. M. Wing & A. B. Kristofferson, 1973a, 1973b) distinguishes central timer and motor implementation processes. Previous studies have shown that increases in interresponse interval (IRI) variability with mean IRI are due to central timer processes, not motor implementation. The authors examine whether this is true with IRI duration changes in binary rhythm production. Ten participants provided IRI and movement data in bimanual synchronous tapping under equal (isochronous) and alternating (rhythm) interval conditions. Movement trajectory changes were observed with IRI duration (300, 500, or 833 ms) and for 500-ms IRIs produced in rhythm contexts (300/500 ms, 500/833 ms). However, application of the Wing-Kristofferson model showed that duration and context effects on IRI variability were attributable largely to timer processes with relatively little effect on motor processes.

Timing movements to interval durations specified by discrete or continuous sounds

Understanding how the timing of motor output is coupled to sensory temporal information is largely based on synchronisation of movements through small motion gaps (finger taps) to mostly empty sensory intervals (discrete beats). This study investigated synchronisation of movements between target barriers over larger motion gaps when closing time gaps of intervals were presented as either continuous, dynamic sounds, or discrete beats. Results showed that although synchronisation errors were smaller for discrete sounds, the variability of errors was lower for continuous sounds. Furthermore, finger movement between targets was found to be more sinusoidal when continuous sensory information was presented during intervals compared to discrete. When movements were made over larger amplitudes, synchronisation errors tended to be more positive and movements between barriers more sinusoidal, than for movements over shorter amplitudes. These results show that the temporal control of movement is not independent from the form of the sensory information that specifies time gaps or the magnitude of the movement required for synchronisation.

Updated systematic review and meta-analysis of the effects of n-3 long-chain polyunsaturated fatty acids on depressed mood

Background: The debate over a role for n-3 long-chain polyunsaturated fatty acids (n-3 PUFAs) in depressed mood continues.

Values based supply chain management and emergent organizational structure

Purpose – The purpose of this paper is to describe an emergent supply chain management system that supports a sustainable values based organization (VBO) using a structuration theory-based framework.

Design/methodology/approach – A case study of a sustainable beef cooperative employing a structuration theory framework provides insights into sustainable supply chain management models.

Findings – The supply chain design and management afford the key to the VBO’s success. In order to attain the necessary price premium, the unique product attributes acquired through the natural beef production process must be sustained along the entire supply chain and communicated to the end customer. Structuration theory is useful in understanding supply chain management in VBOs.
Research limitations/implications – The paper has implications for studying VBOs, particularly those prioritizing sustainability values. The descriptive model presented is useful in settings where organizational structure and the supply chain are needed to support sustainable products and processes and whose success is facilitated by establishing strategic partners, especially those that make possible economies of scale. The study is limited to one, privately owned firm, operating in a specialty industry sector.

Practical implications – The paper has implications for those entities with an identified values set that endows the product with unique characteristics that must be conveyed to their end consumer in order to command a price premium and/or differentiate the product from a commodity. The case study provides an example of how a unique product as well as a facilitating organizational structure and supply chain emerge out of the application of a set of core values.

Originality/value – Little previous research focuses on implications of supply chain management in VBOs. In addition, the paper contributes to both the supply chain management and sustainability literature by relating supply chain management to a more comprehensive sustainability agenda including social, environmental, and long-term economic sustainability and by a theoretically based structuring.

Keywords Sustainable development, Supply chain management, Food industry, Organizational culture, Animal husbandry

On the mobility of a one-dimensional damped Frenkel-Kontorova chain: Commensurate versus incommensurate

The mobility of a one-dimensional damped Frenkel-Kontorova chain under a de driving force is studied numerically and analytically For the commensurate case, the particles in the chain me synchronized st high driving force. For the incommensurate chain, a single mode solution dominates st high mobility regime. We are able to calculate the mobilities for both the cases analytically, and a good agreement with numerical results is found. The mobility hysteresis for the incommensurate chain is explained by the existence of two branches of physical solutions, and transitions occur when one of them breaks up.

A lower mass for the exoplanet WASP-21b

We present high-precision transit observations of the exoplanet WASP-21b, obtained with the Rapid Imager to Search for Exoplanets instrument mounted on the 2.0-m Liverpool Telescope. A transit model is fitted, coupled with a Markov chain Monte Carlo routine, to derive accurate system parameters. The two new high-precision transits allow us to estimate the stellar density directly from the light curve. Our analysis suggests that WASP-21 is evolving off the main sequence which led to a previous overestimation of the stellar density. Using isochrone interpolation, we find a stellar mass of 0.86 ± 0.04 Msun, which is significantly lower than previously reported (1.01 ± 0.03 Msun). Consequently, we find a lower planetary mass of 0.27 ± 0.01 MJup. A lower inclination (87?4 ± 0?3) is also found for the system than previously reported, resulting in a slightly larger stellar (R*= 1.10 ± 0.03 Rsun) and planetary radius (Rp= 1.14 ± 0.04 RJup). The planet radius suggests a hydrogen/helium composition with no core which strengthens the correlation between planetary density and host star metallicity. A new ephemeris is determined for the system, i.e. T0= 245 5084.519 74 ± 0.000 20 (HJD) and P= 4.322 5060 ± 0.000 0031 d. We found no transit timing variations in WASP-21b.

Interlaboratory comparison of real-time polymerase chain reaction methods to detect Coxiella burnetii, the causative agent of Q fever

The bacterium Coxiella burnetii, which has a wide host range, causes Q fever. Infection with C burnetii can cause abortions, stillbirth, and the delivery of weak offspring in ruminants. Coxiella burnetii infection is zoonotic, and in human beings it can cause chronic, potentially fatal disease. Real-time polymerase chain reaction (PCR) is increasingly being used to detect the organism and to aid in diagnosis both in human and animal cases. Many different real-time PCR methods, which target different genes, have been described. To assess the comparability of the C. burnetii real-time PCR assays in use in different European laboratories, a panel of nucleic acid extracts was dispatched to 7 separate testing centers. The testing centers included laboratories from both human and animal health agencies. Each laboratory tested the samples using their in-house real-time PCR methods. The results of this comparison show that the most common target gene for real-time PCR assays is the IS1111 repeat element that is present in multiple copies in the C. burnetii genome. Many laboratories also use additional real-time PCR tests that target single-copy genes. The results of the current study demonstrate that the assays in use in the different laboratories are comparable, with general agreement of results for the panel of samples.

IQ-motif selectivity in human IQGAP2 and IQGAP3: binding of calmodulin and myosin essential light chain

The IQGAP [IQ-motif-containing GAP (GTPase-activating protein)] family members are eukaryotic proteins that act at the interface between cellular signalling and the cytoskeleton. As such they collect numerous inputs from a variety of signalling pathways. A key binding partner is the calcium-sensing protein CaM (calmodulin). This protein binds mainly through a series of IQ-motifs which are located towards the middle of the primary sequence of the IQGAPs. In some IQGAPs, these motifs also provide binding sites for CaM-like proteins such as myosin essential light chain and S100B. Using synthetic peptides and native gel electrophoresis, the binding properties of the IQ-motifs from human IQGAP2 and IQGAP3 have been mapped. The second and third IQ-motifs in IQGAP2 and all four of the IQ-motifs of IQGAP3 interacted with CaM in the presence of calcium ions. However, there were differences in the type of interaction: while some IQ-motifs were able to form complexes with CaM which were stable under the conditions of the experiment, others formed more transient interactions. The first IQ-motifs from IQGAP2 and IQGAP3 formed transient interactions with CaM in the absence of calcium and the first motif from IQGAP3 formed a transient interaction with the myosin essential light chain MIc1sa. None of these IQ-motifs interacted with S100B. Molecular modelling suggested that all of the IQ-motifs, except the first one from IQGAP2 formed alpha-helices in solution. These results extend our knowledge of the selectivity of IQ-motifs for CaM and related proteins.