Biomechanical in vitro evaluation of three stable internal fixation techniques used in sagittal osteotomy of the mandibular ramus: a study in sheep mandibles

Among the osteotomies performed in orthognathic surgery, the sagittal osteotomy of the mandibular ramus (SOMR) is the most common, allowing a great range of movements and stable internal fixation (SIF), therefore eliminating the need of maxillomandibular block in the postoperative period. Objectives: The purpose of this study was to evaluate the biomechanical resistance of three national systems used for SIF in SOMR in sheep mandibles. Material and methods: The study was performed in 30 sheep hemi-mandibles randomly divided into 3 experimental groups, each containing 10 hemi-mandibles. The samples were measured to avoid discrepancies and then subjected to SOMR with 5-mm advancement. In group I, 2.0x12 mm screws were used for fixation, inserted in an inverted "L" pattern (inverted "L" group). In group II, fixation was performed with two 2.0x12 mm screws, positioned in a linear pattern and a 4-hole straight miniplate and four 2.0x6.0 mm monocortical screws (hybrid group). In group III, fixation was performed with two-hole straight miniplates and eight 2.0x6.0 mm monocortical screws (mini plate group). All materials used for SIF were supplied by Osteosin - SIN. The hemimandibles were subjected to vertical linear load test by Kratos K2000MP mechanical testing unit for loading registration and displacement. Results: All groups showed similar resistance during mechanical test for loading and displacement, with no statistically significant differences between groups according to analysis of variance. Conclusion: These results indicate that the three techniques of fixation are equally effective for clinical fixation of SOMR.

Effects of habitat fragmentation on the spider community (Arachnida: Araneae) in three Atlantic forest remnants in southeastern Brazil.

This work was developed in three remnants of Atlantic forest in southeastern Brazil. We aimed to assess edge effects in the spider community in a well conserved fragment and to study the variation of spider diversity among fragments of different sizes. The spider families with the highest richness were Theridiidae (38 sp), Araneidae (31 sp) and Salticidae (25 sp). The control area showed the highest diversity (D=0.98) and exclusive species (58.9%). We concluded that spider richness is higher in the large and best preserved fragment. In addition, we found that species richness and abundance increased towards the interior.

A comparative study of the extracutaneous pigmentary system in three anuran amphibian species evaluated during the breeding season.

The present investigation examined the extracutaneous pigmentation pattern of three species of anuran amphibians, Dendropsophus nanus, Physalaemus cuvieri, and Rhinella schneideri, during the course of their breeding seasons. Pigmentation intensity in the different organs was graded on a 4-category scale, in which category 0 refers to organs without pigment and category 3 refers to intensely pigmented organs, with 2 intermediate stages of progressively stronger pigmentation. Rhinella schneideri showed testicular pigmentation, with intra-specific variation (categories 0 and 1). In P. cuvieri the pigmentation in the lungs varied in time: all the animals showed pigmentation (category 1) at the beginning of the breeding season, and as the season progressed the absence of pigments became the most common pattern. In the liver of the first animals collected, the pigment intensity was high (category 2) with many iridophores present, but in the last specimens collected no iridophores were found. The variation in D. nanus occurred in the kidneys, where animals collected at the beginning of the season did not show pigmentation. Renal veins displayed few melanocytes (category 1); animals collected at the end of the season showed more pigmentation in the kidneys (category 2), whereas in the renal veins the intensity remained the same. The changes observed in the extracutaneous pigment system in some organs, during the reproductive period, may be due to physiological alterations or may represent a species-specific characteristic.

Isolation and characterization of Wharton's jelly-derived multipotent mesenchymal stromal cells obtained from bovine umbilical cord and maintained in a defined serum-free three-dimensional system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nasal T-cell lymphoma presenting as midline lethal granuloma. Characterization of three cases by clinical markers of lymphomas

The authors report on three cases of so-called midline granuloma submitted to clinicopathologic and immunophenotype studies. The histopathologic features detected were necrosis, vasculitis and an atypical lymphohistiocytic infiltrate. Immunophenotype studies using monoclonal antibodies showed evidence leading to the diagnosis of nasal T cell lymphoma or lymphomatoid granulomatosis. Two of the patients with the presence of progressive or large cells died within 24 months, indicating that the size of the atypical lymphoid cells may be of prognostic significance.

Prevalence and severity of caries in 3-12-year-old children from three districts with different fluoridation histories in Araraquara, SP, Brazil

Objective: To determine the prevalence and severity of caries in 3-12-year-old children in three districts of the city of Araraquara, Design: An epidemiological survey was carried out by trained and calibrated examiners in 1995 and 1996, using the WHO diagnostic criteria. Setting: Two districts, Araraquara and Vila Xavier had been fluoridated since 1963 and one, Gavião Peixoto, since 1994. Subjects: The study included 1,191 children from Araraquara, 653 from Vila Xavier and 652 from Gavião Peixoto. Outcome measures: Prevalence of caries, dmft, dmfs, DMFT and DMFS indices. Results: Results showed moderate caries experience in all three districts. Differences between districts in relation to fluoridation history were particularly obvious in primary teeth. In 3-4-year-old children, one third of those in Araraquara and Vila Xavier had some caries experience compared to 58% in Gavião Peixoto. In permanent teeth, 20% or less of the mean DMFT was made up of untreated decay in Araraquara and Vila Xavier whereas in Gaviao Peixoto it made up between 50 and 57% of values in 7-12-year-old children. Conclusions: The prevalence and severity of caries was lower in dentitions of children from the districts fluoridated since 1963. Improvements are likely in the future in Gaviao Peixoto as the benefit of fluoridation continues but additional means of promoting oral health are needed in all three districts.

The current situation of small and medium-sized industrial enterprises in Trinidad & Tobago, Barbados and St. Lucia

Includes bibliography

Science and technology policies in open economies: the case of Latin America and the Caribbean

Includes bibliography

Quality management and competitiveness: the diffusion of the ISO 9000 standards in Latin America and recommendations for government strategies

Includes bibliography

Effects evaluation of remaining resin removal (three modes) on enamel surface after bracket debonding

Introduction: An appropriate selection of instruments is essential to perform a correct debonding technique, by properly removing orthodontic brackets and the remaining resin. Objective: The aim of this study was to evaluate three methods of remaining resin removal on enamel surface after bracket debonding, by means of Scanning Electron Microscopy (SEM). Methods: Eighteen bovine incisors were selected and divided into three groups (A, B and C) of six teeth each. Before bracket bonding, epoxy resin casts were obtained by impression of the teeth with addition silicon, in order to register baseline enamel characteristics and representing the control group. The methods for remaining resin removal were: Group A - gross and medium granulation Soflex discs; Group B - carbide bur in low-speed; Group C - carbide bur in high-speed. Soflex polishing system fine and ultrafine granulation discs were used for Group A, rubber tips for Groups B and C, and polishing paste for all groups. After polishing, impression of teeth were taken and casts were analyzed by means of SEM. The baseline enamel characteristics (Control Group) were compared to the final aspect of enamel to determine the method that generated less enamel abrasion. Results and Conclusion: The remaining resin removal by carbide bur in low-rotation, and enamel polished with rubber tips followed by polishing paste produced the smaller damage to the enamel.

Indexes of structural reform in Latin America

Includes bibliography

Performance of cultivars of crisp mini-lettuce with respect to ground cover and spacing, in three planting times

The planting of lettuce in greenhouses, as well as covering beds with a polyethylene sheet, is a viable technology, promoting improvements in microclimatic conditions of the environment. In view of the little information on mini-lettuce, the aim of this work was to evaluate the performance of three cultivars of crisp minilettuce ('Green Frizzly', 'Red Frizzly no. 1' and 'Red Frizzly no. 2') with and without ground cover, under different spacings (20 × 15 cm and 20 × 20 cm), in three planting times (1: November 16, 2004; 2: December 17, 2004; and 3: January 20, 2005). The study was conducted in a greenhouse at UNESP-FCAV, Jaboticabal-SP. The experiments were carried out using a randomized block design, following a 3 × 2 × 2 factorial scheme with 12 treatments and three repetitions. The characteristics evaluated were plant height (cm), head diameter (cm), fresh weight (g) and number of leaves per plant. Planting time 3 was shown to be favorable for all the characteristics analyzed. 'Red Frizzly no. 2' was found to be the most suited to planting time 1, and for planting times 2 and 3, this cultivar did not differ from 'Red Frizzly no. 1'. The factor ground cover was not found to affect the characteristics evaluated, and therefore, cultivation without ground cover is recommended. The spacing 20 × 15 cm was shown to be favorable, resulting in cultivation with the highest populations, thereby increasing productivity. Based on the results obtained and for the conditions in which the experiment was conducted, it can be concluded that: planting time 3 (January 20, 2005) was the most favorable; the cultivars 'Red Frizzly no. 2' and 'Red Frizzly no. 1' are adapted to all the planting times; and cultivation without ground cover using a spacing of 20 × 15 cm was the most suitable.

A competitiveness index for the regions of a country

Includes bibliography

Three-dimensional transient complex free surface flows: Numerical simulation of XPP fluid

In this paper we present a finite difference MAC-type approach for solving three-dimensional viscoelastic incompressible free surface flows governed by the eXtended Pom-Pom (XPP) model, considering a wide range of parameters. The numerical formulation presented in this work is an extension to three-dimensions of our implicit technique [Journal of Non-Newtonian Fluid Mechanics 166 (2011) 165-179] for solving two-dimensional viscoelastic free surface flows. To enhance the stability of the numerical method, we employ a combination of the projection method with an implicit technique for treating the pressure on the free surfaces. The differential constitutive equation of the fluid is solved using a second-order Runge-Kutta scheme. The numerical technique is validated by performing a mesh refinement study on a pipe flow, and the numerical results presented include the simulation of two complex viscoelastic free surface flows: extrudate-swell problem and jet buckling phenomenon. © 2013 Elsevier B.V.

Population, social equity and changing production patterns

Includes bibliography